Proxies not created for WMV files

One of my FCSrv installs is having difficulty with .wmv files. The system has Flip4Mac Pro installed, and if you open the files directly, or even use the "view" popup in the FCS client on that system, the clips play fine. Also, in column view I see the previews. However, server doesn't create poser frames or thumbnails on scan, and the clip proxy transcode jobs stall (progress bar in Search all Jobs doesn't move) I was under the impression that if Quicktime on the server could play it, Final Cut Server could transcode it.

WMV is not native to APPLE thus is is trying to upscale to a MOV.

Similar Messages

8dot3 filenames not created for Program Files and Program Files (x86)

Interesting issue we are realizing on Servers deployed from SCCM 2012. 8dot3names are not created for Program Files and Program Files (x86). they are created for other files/folders at the root of C and below Program Files and Program Files (x86). This is
causing issues when programs are installed and the path is then created with 8dot3 filenames for program files and program files (x86)

Arg. we just got bitten by this "feature", and it's affecting our security software stack (name starts with M and ends with ee), and some ancient crud too.
And found this, which suggests a logical reason for 8dot3name to not be present on servers, but, on clients, I think it's a rather gross assumption...
http://blogs.technet.com/b/josebda/archive/2012/11/13/windows-server-2012-file-server-tip-disable-8-3-naming-and-strip-those-short-names-too.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv file?

I went through the forums and made sure that any blocks or copywrites weren't triggered by the file, it's clean and can be opened using a media player and other video editing software like windows MovieMaker. I keep getting "The importer reported a generic error" message and have no idea how to proceed. Can someone please help?

Re: Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv file?
This ARTICLE starts with a checklist on setting up a computer to run PrE best, then goes into a series of links for tuning up one's computer and OS, and then links on troubleshooting.
There is also a link on posting all necessary info, to help others help you.
Without knowing much more about your system, it is impossible to say much beyond that WMV's are tough assests to work with, requiring a lot of CPU horsepower.
Good luck,
Hunt

Should not create any output file when invalid input source schema

I have a xslt file, which I have make code to check the order status value.
If OrderStatus != 'Reject' --> create attribute, element for output file
Else OrderStatus = 'Reject' --> do not create attribute/element ==> output is the empty file.
Requirement: if OrderStatus = 'Reject' --> do not create any output file.
how to do with this requirement?

I'd ask them over here.
http://forums.asp.net/
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

I want XSLT do not create any output file

I have a xslt file.
<xsl:variable name="var:InValidReceiptCount">
.... In here. I want xslt do not create any output file, also an empty file
</xsl:variable>
Thanks for helping :)

If you can tell us your application scenario and why you are trying to control the output name only with xslt, then we can drive you towards correct direction. Remember you cannot control output path with xslt.
if you are using bizTalk, you have to use xslt with maps and set the output path at ports
if you are using .net, you have to control it from your dotnet code.
Xslt alone cannot control the output path.
Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Should not create any output file when transform with xslt file

I have a xslt file, which I have make code to check the order status value.
If OrderStatus != 'Reject' --> create attribute, element for output file
Else OrderStatus = 'Reject' --> do not create attribute/element ==> output is the empty file.
Requirement: if OrderStatus = 'Reject' --> do not create any output file.
how to do with this requirement?
any help will be appreciated!

Do you mean the xslt file always return the output file?
I have tested this xslt file following (only xslt file, not run in BizTalk project):
Create a blank console application using visual studio and add attached xslt file to newly created console app. Next open the XSLT file and select input file and output files and start xslt debugging to create output file.
I want to edit the xslt file how to cannot create output file in the case OrderStatus = Reject.
I don't say in particualr xslt file, its actually your map as a whole that returns a output message on successful execution.
since you are testing the xslt file as individual file, you are able to control it as per need. i mean you can write incomplete code or any kind of output elements that are not present even in schema. But when you set the map properties to use external
xslt , map completely relies on xslt and xslt has to produce output that matches the output schema structure.
So you better test your xslt by setting it to your map. Once you set map properties to use xslt, you can test your map by right clicking on map and choosing test map.
Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Error: Outlook could not create the work file. Office 2013

I was having issues with Windows 8.1 store apps not working and it was suggested to sync my account licenses. I did that but it did not correct my problem. I then ran the troubleshooter app. The troubleshooter found several issues that it
fixed but I cannot remember what they were.
So here's my problem. Now, when I open Outlook (2013) I get the error "Outlook could not create the work file."
Any suggestions?

Glad to hear that you have found a solution and thank you for sharing it here, it will be helpful to other community members who have same questions.
Cheers,
Steve Fan
TechNet Community Support

Why does multiple handles created for the file File (RW-) C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_d08cc06a442b34fc

I am analysing the file handles created by my desktop application and when i generate a report using handle.exe, in report i could see multiple file handles created for
1) File (RW-) C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_d08cc06a442b34fc
2) File (RW-) C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2
I could see around 80 entries of file1 and around 5-10
file 2 .
What my understanding about the WinSxS, should load the dll only once and should keep referencing the same dll. But what my results out from handle.exe contains multiple file handles created. Is there a glitch in system or is it expected behavior? If there
is a problem how to fix it?
My system configuration is as follows
OS windows7 enterprise edition , service pack1..
64 bit os, intel core i7 processor
.net framework 4.5
Thanks
Srikanth

As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous
steps should be helpful for many similar scenarios.  <o:p></o:p>
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You
can also choose to unmark the answer as you wish.  <o:p></o:p>
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar
problems.  <o:p></o:p>
Thanks!<o:p></o:p>
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Encode Video Files not working for avi files

Hi,
I've been trying to convert some .avi files to apple format using Lion's native 'Encode video files' function however keep getting a 'avconvert: source file not found for source file://fileparthhere avconvert: failed to create an export session. Check setup
I can't work out why as this has worked before in Lion and works fine for other video formats. The only thing I've done is remove Final Cut Express HD and can't add it again as I don't own it anymore
Suggestions? Is there a encoder to make this work or should it work anyway?
Thanks

If you click Yes the project file will be updated when you save it. That has nothing to do with the media.
Are the Lesson and Media folders still in the Book Files folder (or whatever it's called)?
Select one of the clips in the browser and use Edit>Item Properties. One of the first lines is Source. That gives you the file path for where your media is supposed to be located. What does it say? If nothing is there, use the File>Reconnect function and point the application to where the media is located.

MS Office 2004 reports "Word could not create the work file."

I have searched the world for the solution and apparently nobody else has this problem. When opening any document (.doc) Word will report "Word could not create the work file. Check the amount of disk space on your start up drive."
There are 40 gigs free. There is 2 gig of memory. It's the only app open.
Is there a solution to this problem other then not using Word at all?

I'm learning more about the doc file in question.
Evidently it was created on Windows about 4 years
ago. If I Save As... the file and click the
Compatibility button it complains about a missing
"linked" file. While this might be the cause of the
problem there doesn't seem to be any way of fixing it
short of finding a time machine and wacking the
creator before they wrote a word. If I go ahead and
save the document Word crashes and corrupts the
original file (err the back up of the back up of the
original file).
I think you may have to give up on this one.
A "linked file" is a reference pointer within the main word document that tells word to locate another file and incorporate it into the document by reference (but not include the actual contents of the linked file)
Since you say "If I Save As... the file and click the Compatibility button..." you can get into the document.
So try turning on invisibles, and find the reference to the linked file. You may also be able to find it by turning on Document Map.
Delete the link, and that should take care of the crashing problem.
Of course, your file will not be 'complete' but thats a differnet problem.

OS X lion changes "Date Created" for old files that I edit or update.

Whenever i edit my old photos and save the changes, Finder changes the "Date Created" for that file to the date of the last edit.
This is annoying as i used finder and date created to search through my old images. Is there any way to get it back to functioning like the previous system ?

StoneComputers wrote:
What about the incredable lag time from clicking on a program to the time it opens (or the time till the loading screen starts)? I wish I could record it and play it so I could see if thats normal from other members... the icon just sitting there for over 35 second (I just counted 36 till the loading screen popped up) at first I thought it was me not clicking hard enought cuz the mouse button I have is real stiff (any ideas on that?) but no it takes that long just to get to the app loading screen... this happens every time same amount of time with the 3 programs I use the most, prolly more but I know for a fact world of warcraft, uTorrent, and Google Chrome. I would just chalk it up to slow hardware but they load real quick in windows 7 and once this bad spot is loaded the program runs so fast and nice afterword. Maybe some tweeks? I wonder if this would happen in Snow?
The coment "few outdated programs" Ive seen alot its not just a few its a lot and since games are not Apple's strong point I would think they would want to keep as many as they could...
An example of the rants you will see from a lot here. Don't be put off as these problems are generally user specific, and these same old comments come out after the release of every OSX I can remember. When Lion is upgraded to the next OSX you can gaurentee these forums will be full of people screaming about how great Lion was. Happened with Tiger, Leopard and Snow Leopard.
So come to think of it you may be better off Googling sites that give you unbiased views on Lion, rather than expect any positive comments here. For every one complaint there are probably 100,000 people with no issues.
Cheers

Using QT to create a wmv file - can I include a live link?

I'm using QT to create a wmv file. I'd like to be able to include a live link in the movie. Is this possible?

Try posting in the QuickTime for Mac forum. You'll be more likely to get help there than you will here in the QuickTime for Windows forum. You might also try asking in the Flip4Mac forums (I presume you're using the Flip4Mac codecs to do the WMV export).
Regards.

Save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

When I open is adobe acrobat I get this message.
"This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command."

Accounting entry against Excise invoice not created for Service Tax sales

Dear all,
I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco) - Domestic(Customer receivable reconciallation) account-Credit entry.
But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
Plz. suggest step by step guideline to resolve this issue.
Thanks & Regards,
Mukesh Pardeshi

Hi ReazuddinMD,
thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
Now i am geeting error as below at the time of saving Excise invoice,
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.

Interval 01 was not created for number range object HRTEM_REFN

Dear expert!
Now, I'm getting some issues in Training and event management module.
- The first, I created business event
- Second, I process to book for business event by tcode: PSV1 --> book --> book/payment info --> activity allocation.
But when I was booking, the system displayed error: "Interval 01 was not created for number range object HRTEM_REFN"
Help me, please!
Best regards, Huy!

Go to the customization as below
Training and event mgt>Basic settings>Number range maintanence>Define number ranges for External operation
and maintain number ranges as 01 Internal
Hope ur problem will solve
with regards
partha

Proxies not created for WMV files

Similar Messages

Maybe you are looking for