Proximity sensor doesn't work correctly after 4.3 update

The proximity sensor disables the screen when I place the phone near my face when in a call, that's fine.
However, it never re-enables it when I move it away. This happened prior to the 4.3 update, however I could press the home button and it would light the screen up.
That doesn't happen anymore, so I can not hang up a phone call once the screen goes off.
This is a major defect

I have the same issue with a 2 month old Galaxy S4 and I noticed it after the last push from Verizon whihc may have been the 4.3 update. Proximity sensor won't light up the screen again when you move it away from your face.  Verizon told me to do a factory reset, Samsung told me to do a soft reset then clear the cache.  Did all and still have same problem. Had a call yesterday and person on other end did not hang up so I had no way to hand up on my end.  Am turning off the proximity senson durring calls for now but it will use up more of the battery with the screen lit more.  They need to fist it.

Similar Messages

  • Proximity Sensor Doesn´t Work. How to fix it?

    I´am experiencieng a problem that many other iphone users may either.
    The proximity sensor doesn´t work. When i answer a phone call, the display doesn´t turn off, and everytime i keep dialing numbers, endind calls and a lot of other little things that are getting on my nerves.
    It seems apple couldn´r care less for those problems we are having, and nothing has been told or done. Thats good for us to see how much apple is concerned with customers.
    Anyway, is there a way to fix this annoying thing???

    this could be a few reasons,
    1. try and update the device to the latest firmware via itunes, to check you on are on 4.3 go to settings>general>about and under version, if is lower than 4.3, update the device
    2. if this fails remove any cases or screen protecters (silly, i know) that may block the sensor
    3. if that fails, take to the nearest apple store, and describe your problem, they will either replace a=or repair
    hope this helps
    chris

  • My proximity sensor doesn't work after call waiting

    My proximity sensor works fine during calls. Until someone calls in while I'm on the call. Whether I answer or not, when I pull it away from my face it activates the screen as it should, but it never turns it back off when I continue the conversation. This ONLY happens with call waiting. once i press on the home button and unlock the phone it works fine, knowing that i had a replacement for the phone for the same fault and now and i don't know what to do as my brother's phone is exactly the same however it works fine.
    I have an iPhone 6 running 8.2

    Try removing your case.  If still an issue, take it in to Apple.  You have a 1 year warranty.

  • Sony xperia z3 compact proximity sensor doesn't work while calling...

    Hello there, I have an issue, when I make call my prox, sensor doesn't seem to be functioning... The sensor it self works just fine, I checked them via internal check + few external apps.I already reseted my phone to factory settings. Ps: Yeah I have tempering glass screen, but that shouldn't be an issue because like I said with the testing app the sensor worked just fine ( tested with my finger and ear, worked fine)...  Regards

    Hi, I have the same problem, proximity sensor not working. My phone is in mint condition, not even scratches. This happened just after the latest update, every time I get a call the screen won't turn off. I followed the repair instructions using the PC Companion Software, I errased all the data and restored the phone. I still have the same problem, I tried Safe Mode and the problem remains. I emailed support and they said I can't go back to the previous software version that actually worked just fine. Is very frustrating to run out of options on a "High End" product from sony. I used to love this phone and even convinced some friends to buy it. Now every time I need to make a call I just want to throw it against the wall. Device model: D5833Software version: 5.1.1Build Number: 23.4.A.0.546 Hope I can get some support here! 

  • N97 Proximity Sensor doesn't work quite as well?

    I just recently updated my phone and it seems like the switch from portrait and landscape doesn't work quite as well. The angle at which I have to put it on landscape is steeper and it's really annoying. Anyone else have this problem?
    edit: I know the firmware went through coz the lock bug isn't there anymore. but when I connect via USB it still tells me "charging" . Just saying 
    Message Edited by arvuitton on 11-Jul-2009 02:54 AM

    hey there, what you are referring to isn't the proximity sensor lol. the proximity sensor is basically used to detect when your face is close enough to the phone (i.e. when pressing your ear against earpiece), so that the display switches off to stop accidental presses of the screen, and to conserve power by turning the backlight off. anyways what you are referring to are the sensor settings for the accelerometer in your phone. i don't have a N97 so can't vouch for what you're saying, although it may not exactly be a bug, rather a tweak of the accelerometer settings. from memory, the N97 charges via USB, does it not? this behaviour will be automatic upon plugging the cable into your PC. i doubt that there is an option to turn it off, though i am not exactly 100% sure about this. this behaviour may be changed in future firmware updates or it may not, as the phone relies on USB charging as its sole charging method. but its not really a bug as such.
    please throw some kudos our way, it would mean a lot to us   
    If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

  • My proximity sensor doesn't work anymore while calling... How do I fix this?

    The proximity sensor of my iphone 5S doesn't work anymore. Therefore my screen just stays on while I'm on the phone and every time my face touches the screen I pauze the conversation, or mute it, or...
    Does anyone know how to fix this?

    Try removing your case.  If still an issue, take it in to Apple.  You have a 1 year warranty.

  • Program doesn't work correctly after a copypaste from a working program

    Hi everybody!
    i made a really easy program, that doesn't work for some mysterious reasons...
    This first one is the prototype of the program: http://pastebin.com/fpFy3uLn
    in this version all is working correctly!
    So, where is the problem?
    The problem is that, once i copy-pasted the functions in the main program, it stopped to work!
    I have no compilation error or similar...
    This is the final program, the one that doesn't work: http://pastebin.com/7EWn1VSF
    thx a lot for your attention

    I commented the whole
    #Section "InputDevice"
    #       Identifier  "Synaptics Touchpad"
    #EndSection
    part
    and the appropiate line
            #InputDevice "Synaptics Touchpad" "SendCoreEvents"
    on Sever Layout.
    It stopped the EE error, touchpad works here
    but it's reverted to old "typing=accidentally doing clicks" since it got way too sensitive
    I can't run gsynaptics , synclient or syndaemon to fix it (as I used to)
    since I get
    drini ~ $ synclient
    Couldn't find synaptics properties. No synaptics driver loaded?

  • GNOME (Wayland) doesn't work correctly after resume

    I installed Wayland, GNOME and GDM on my laptop. When I resume and unlock laptop after supend GNOME log me out.
    EDIT:
    I'll add some logs:
    lut 09 23:55:57 adam-laptop gnome-session[353]: OK
    lut 09 23:55:57 adam-laptop gnome-session[353]: Received signal:15->'Zakończony'
    lut 09 23:55:57 adam-laptop gnome-session[353]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop gnome-session[353]: OK
    lut 09 23:55:57 adam-laptop gnome-session[353]: OK
    lut 09 23:55:57 adam-laptop gnome-session[353]: Received signal:15->'Zakończony'
    lut 09 23:55:57 adam-laptop gnome-session[353]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop gnome-session[353]: Received signal:15->'Zakończony'
    lut 09 23:55:57 adam-laptop gnome-session[353]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop gnome-session[353]: (tracker-miner-fs:601): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: Połączenie jest zamknięte
    lut 09 23:55:57 adam-laptop gnome-session[353]: (tracker-miner-fs:601): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: Połączenie jest zamknięte
    lut 09 23:55:57 adam-laptop gnome-session[353]: (tracker-miner-fs:601): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: Połączenie jest zamknięte
    lut 09 23:55:57 adam-laptop gnome-session[353]: Received signal:15->'Zakończony'
    lut 09 23:55:57 adam-laptop gnome-session[353]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop gnome-session[353]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop gnome-session[353]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop gnome-session[353]: ** (zeitgeist-datahub:529): WARNING **: zeitgeist-datahub.vala:226: Unable to get name "org.gnome.zeitgeist.datahub" on the bus!
    lut 09 23:55:57 adam-laptop gnome-session[353]: (tracker-miner-fs:601): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.UDisks2VolumeMonitor disconnected from the bus; removing drives/volumes/mounts
    lut 09 23:55:57 adam-laptop org.freedesktop.Tracker1[357]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop org.freedesktop.Tracker1[357]: OK
    lut 09 23:55:57 adam-laptop org.freedesktop.Tracker1[357]: Received signal:15->'Zakończony'
    lut 09 23:55:57 adam-laptop org.gnome.zeitgeist.Engine[357]: [22:55:57.204789 WARNING] zeitgeist-daemon.vala:449: The connection is closed
    lut 09 23:55:57 adam-laptop org.gnome.zeitgeist.Engine[357]: g_dbus_connection_real_closed: Remote peer vanished with error: Error receiving message: Connection reset by peer (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop org.gnome.evolution.dataserver.Calendar4[357]: g_dbus_connection_real_closed: Remote peer vanished with error: Błąd podczas pobierania komunikatu: Połączenie zerwane przez drugą stronę (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop org.gnome.evolution.dataserver.Calendar4[357]: (evolution-calendar-factory:525): libedata-cal-CRITICAL **: e_intervaltree_destroy: assertion 'E_IS_INTERVALTREE (tree)' failed
    lut 09 23:55:57 adam-laptop org.gtk.Private.UDisks2VolumeMonitor[357]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop ca.desrt.dconf[357]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop org.freedesktop.Telepathy.AccountManager[357]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop org.gnome.OnlineAccounts[357]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop org.gnome.evolution.dataserver.Sources3[357]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop org.gnome.Shell.CalendarServer[357]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop org.gnome.Shell.CalendarServer[357]: gnome-shell-calendar-server[449]: Lost (or failed to acquire) the name org.gnome.Shell.CalendarServer - exiting
    lut 09 23:55:57 adam-laptop org.a11y.Bus[357]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop gnome-session[353]: (tracker-extract:527): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.UDisks2VolumeMonitor disconnected from the bus; removing drives/volumes/mounts
    lut 09 23:55:57 adam-laptop org.gtk.vfs.Daemon[357]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    lut 09 23:55:57 adam-laptop org.gtk.vfs.Daemon[357]: A connection to the bus can't be made
    lut 09 23:55:54 adam-laptop systemd-coredump[1006]: Process 362 (gnome-shell) of user 1000 dumped core.
    lut 09 23:55:54 adam-laptop NetworkManager[240]: <info> (wlan0): roamed from BSSID (none) ((none)) to 2C:26:C5:BE:BA:D1 (Plus MF60 BEBAD1)
    lut 09 23:55:54 adam-laptop NetworkManager[240]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
    lut 09 23:55:54 adam-laptop gnome-session[353]: Unrecoverable failure in required component gnome-shell-wayland.desktop
    lut 09 23:55:54 adam-laptop gnome-session[353]: gnome-session[353]: WARNING: Application 'gnome-shell-wayland.desktop' killed by signal 5
    lut 09 23:55:54 adam-laptop gnome-session[353]: WARNING: Application 'gnome-shell-wayland.desktop' killed by signal 5
    lut 09 23:55:54 adam-laptop org.a11y.atspi.Registry[427]: ** (at-spi2-registryd:1013): WARNING **: AT-SPI: Cannot open default display
    lut 09 23:55:54 adam-laptop org.a11y.atspi.Registry[427]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
    lut 09 23:55:54 adam-laptop org.a11y.Bus[357]: Successfully activated service 'org.a11y.atspi.Registry'
    lut 09 23:55:54 adam-laptop org.a11y.atspi.Registry[427]: ** (at-spi2-registryd:1013): WARNING **: Could not open X display
    lut 09 23:55:54 adam-laptop gnome-session[353]: WARNING: App 'gnome-settings-daemon.desktop' exited with code 1
    lut 09 23:55:54 adam-laptop gnome-session[353]: gnome-session[353]: WARNING: App 'gnome-settings-daemon.desktop' exited with code 1
    lut 09 23:55:54 adam-laptop gnome-session[353]: ** (gnome-settings-daemon:1007): WARNING **: Unable to initialize GTK+
    lut 09 23:55:54 adam-laptop org.a11y.Bus[357]: Activating service name='org.a11y.atspi.Registry'
    lut 09 23:55:54 adam-laptop gnome-session[353]: ** (gnome-settings-daemon:1007): WARNING **: Could not open X display
    lut 09 23:55:54 adam-laptop polkitd[258]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.9, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale pl_PL.utf8) (disconnected from bus)
    lut 09 23:55:53 adam-laptop gnome-session[353]: gnome-session[353]: WARNING: App 'gnome-settings-daemon.desktop' exited with code 1
    lut 09 23:55:53 adam-laptop gnome-session[353]: WARNING: App 'gnome-settings-daemon.desktop' exited with code 1
    lut 09 23:55:53 adam-laptop gnome-session[353]: (nm-applet:597): Gdk-WARNING **: nm-applet: Fatal IO error 11 (Zasoby chwilowo niedostępne) on X server :0.
    lut 09 23:55:53 adam-laptop org.gnome.Caribou.Daemon[357]: (caribou:480): Gdk-WARNING **: caribou: Fatal IO error 11 (Zasoby chwilowo niedostępne) on X server :0.
    lut 09 23:55:53 adam-laptop org.gnome.Terminal[357]: (gnome-terminal-server:644): Gdk-WARNING **: gnome-terminal-server: Fatal IO error 11 (Zasoby chwilowo niedostępne) on X server :0.
    lut 09 23:55:53 adam-laptop gnome-session[353]: (gnome-settings-daemon:502): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 11 (Zasoby chwilowo niedostępne) on X server :0.
    lut 09 23:55:53 adam-laptop kernel: traps: gnome-shell[362] trap int3 ip:7f73b7737ae0 sp:7fffda84dce0 error:0
    lut 09 23:55:53 adam-laptop org.a11y.atspi.Registry[427]: after 21 requests (21 known processed) with 0 events remaining.
    lut 09 23:55:53 adam-laptop org.a11y.atspi.Registry[427]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
    lut 09 23:55:53 adam-laptop gnome-session[353]: (gnome-shell:362): mutter-ERROR **: Connection to xwayland lost
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE)
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) Caught signal 11 (Segmentation fault). Server aborting
    lut 09 23:55:53 adam-laptop gnome-session[353]: Fatal server error:
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE)
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) Segmentation fault at address 0x3c
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE)
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 18: /usr/bin/Xwayland (0x400000+0x25ade) [0x425ade]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f69d0824040]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 16: /usr/bin/Xwayland (0x400000+0x15cca6) [0x55cca6]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 15: /usr/bin/Xwayland (0x400000+0x158921) [0x558921]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 14: /usr/bin/Xwayland (WaitForSomething+0x1c7) [0x5894e7]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 13: /usr/bin/Xwayland (WakeupHandler+0x6b) [0x55d7eb]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 12: /usr/bin/Xwayland (0x400000+0x25fa7) [0x425fa7]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 11: /usr/lib/libwayland-client.so.0 (wl_display_dispatch_queue_pending+0x24) [0x7f69d255d7b4]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 10: /usr/lib/libwayland-client.so.0 (0x7f69d2557000+0x5a6c) [0x7f69d255ca6c]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 9: /usr/lib/libwayland-client.so.0 (0x7f69d2557000+0x59eb) [0x7f69d255c9eb]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 8: /usr/lib/libwayland-client.so.0 (0x7f69d2557000+0x870a) [0x7f69d255f70a]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 7: /usr/lib/libffi.so.6 (ffi_call+0x2f8) [0x7f69d03eec58]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 6: /usr/lib/libffi.so.6 (ffi_call_unix64+0x4c) [0x7f69d03ef1f0]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 5: /usr/bin/Xwayland (0x400000+0x27b13) [0x427b13]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 4: /usr/bin/Xwayland (0x400000+0xf48d3) [0x4f48d3]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 3: /usr/bin/Xwayland (0x400000+0x824c9) [0x4824c9]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 2: /usr/lib/libpthread.so.0 (0x7f69d212e000+0x10210) [0x7f69d213e210]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 1: /usr/bin/Xwayland (0x400000+0x190289) [0x590289]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) 0: /usr/bin/Xwayland (xorg_backtrace+0x56) [0x58c136]
    lut 09 23:55:53 adam-laptop gnome-session[353]: (EE) Backtrace:
    Last edited by dulaman (2015-02-09 22:10:41)

    I have the same issue with a 2 month old Galaxy S4 and I noticed it after the last push from Verizon whihc may have been the 4.3 update. Proximity sensor won't light up the screen again when you move it away from your face.  Verizon told me to do a factory reset, Samsung told me to do a soft reset then clear the cache.  Did all and still have same problem. Had a call yesterday and person on other end did not hang up so I had no way to hand up on my end.  Am turning off the proximity senson durring calls for now but it will use up more of the battery with the screen lit more.  They need to fist it.

  • Bluetooth not working correctly after iOS 4 update

    I recently purchased and have been enjoying the Bose sound link wireless music system in fact I can't say enough about the accessory connecting wirelessly my iPad and iPhone to enjoy music. After the iOS 4 update my iPhone will no longer connect to the bose system while my iPad has no trouble.
    Anyone else experiencing similar Bluetooth issues?
    Tom

    I also have an issue after 4.0 update today.
    Can't discover any bluetooth devices from my 3GS iPhone. It "spins the wheel" searching but never finds any.
    Bluetooth pairing from a Macbook Pro 17 / 10.6.4 results in a passkey being sent to the iPhone but the pairing hangs and there is no connection to the phone.
    So the bluetooth kind of works. .the hardware is functiong (and was fine under 3.1.3).
    This suggests it may be the new iOS4.0 with a few glitches

  • Sleep of monitor doesn't work correctly after wake up

    Hi,
    in order to save energy I scheduled sleep mode and wake up in the system preferences of MacOS 10.4.8.
    Everything works perfectly - at 01 am my Cube goes to sleep and wakes up at 3 pm. I also have a setting, that after 3 minutes of inactivity the monitor goes blank and that normally works well.
    But after the wake up the monitor doesn't go into sleep - instead it stays on until someone moves the mouse or hits a key.
    This is annoying, because sometimes nobody is there when the machine wakes up and the monitor is unnecessarily on.
    Does someone know this behaviour? Is it a bug or did I miss something?
    Hope someone has a solution,
    Maik.
    G4 Cube 450 MHz   Mac OS X (10.4.8)  

    Hi Maik, welcome into the discussion board!
    Do you have activated the option "Screensaver ON" or "Screensaver NEVER ON" for Hot corners in your SystemPrefs ?
    May be you have the upper left Corner active for "not sleeping/not screensaving" ?
    I hope this helps
    Tschüß
    Massimo
    G5 2x2.7 GHz, G4 QuickSilver 867, G4 PB 867, Classic   Mac OS X (10.4.8)  

  • Synaptics Touchpad doesn't work correctly after update

    I have a Lenovo T61 with 2.6.37-ARCH #1 SMP PREEMPT Tue Mar 15 11:40:49 UTC 2011 i686 Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz GenuineIntel GNU/Linux.
    xf86-input-synaptics is installed, version 1.4.0-1
    Since an update, I get the following error when running startx:
    Query no synaptics: 6003C8
    Touchpad unable to query/initialize Synaptics Hardware
    PreInit returned NULL for "Touchpad"
    That is a part of /var/log/Xorg.0.log. The module "synaptics" is loaded two times...
    X.Org X Server 1.9.4.901 (1.9.5 RC 1)
    Release Date: 2011-03-04
    [ 19041.695] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 25 16:17:46 2011
    [ 19041.716] (==) Using config file: "/etc/X11/xorg.conf"
    [ 19041.736] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 19041.757] (==) ServerLayout "Xorg Configured"
    [ 19041.757] (**) |-->Screen "Screen0" (0)
    [ 19041.757] (**) | |-->Monitor "Monitor0"
    [ 19041.757] (**) | |-->Device "Card0"
    [ 19041.757] (**) |-->Input Device "Keyboard0"
    [ 19041.757] (**) |-->Input Device "USB Mouse"
    [ 19041.757] (**) |-->Input Device "Touchpad"
    [ 19041.757] (**) Option "DontZap" "False"
    [ 19041.757] (**) Option "AllowMouseOpenFail" "true"
    [ 19041.757] (**) Option "AutoAddDevices" "False"
    [ 19041.757] (**) Option "AutoEnableDevices" "False"
    [ 19041.757] (**) Not automatically adding devices
    [ 19041.757] (**) Not automatically enabling devices
    [ 19041.758] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 19041.758] (II) Loader magic: 0x81f3280
    [ 19041.758] (II) Module ABI versions:
    [ 19041.758] X.Org ANSI C Emulation: 0.4
    [ 19041.758] X.Org Video Driver: 8.0
    [ 19041.758] X.Org XInput driver : 11.0
    [ 19041.758] X.Org Server Extension : 4.0
    [ 19041.759] (--) PCI:*(0:1:0:0) 10de:0429:17aa:20d8 rev 161, Mem @ 0xd6000000/16777216, 0xe0000000/268435456, 0xd4000000/33554432, I/O @ 0x00002000/128
    [ 19041.759] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 19041.759] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 19041.759] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 19041.759] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 19041.759] (II) "record" will be loaded by default.
    [ 19041.759] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    [ 19041.759] (II) "dri2" will be loaded by default.
    [ 19041.759] (II) LoadModule: "ddc"
    [ 19041.759] (II) Module "ddc" already built-in
    [ 19041.759] (II) LoadModule: "dbe"
    [ 19041.759] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 19041.759] (II) Module dbe: vendor="X.Org Foundation"
    [ 19041.759] compiled for 1.9.4.901, module version = 1.0.0
    [ 19041.759] Module class: X.Org Server Extension
    [ 19041.759] ABI class: X.Org Server Extension, version 4.0
    [ 19041.759] (II) Loading extension DOUBLE-BUFFER
    [ 19041.759] (II) LoadModule: "dri"
    [ 19041.759] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 19041.759] (II) Module dri: vendor="X.Org Foundation"
    [ 19041.759] compiled for 1.9.4.901, module version = 1.0.0
    [ 19041.759] ABI class: X.Org Server Extension, version 4.0
    [ 19041.759] (II) Loading extension XFree86-DRI
    [ 19041.759] (II) LoadModule: "extmod"
    [ 19041.760] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 19041.760] (II) Module extmod: vendor="X.Org Foundation"
    [ 19041.760] compiled for 1.9.4.901, module version = 1.0.0
    [ 19041.760] Module class: X.Org Server Extension
    [ 19041.760] ABI class: X.Org Server Extension, version 4.0
    [ 19041.760] (II) Loading extension MIT-SCREEN-SAVER
    [ 19041.760] (II) Loading extension XFree86-VidModeExtension
    [ 19041.760] (II) Loading extension XFree86-DGA
    [ 19041.760] (II) Loading extension DPMS
    [ 19041.760] (II) Loading extension XVideo
    [ 19041.760] (II) Loading extension XVideo-MotionCompensation
    [ 19041.760] (II) Loading extension X-Resource
    [ 19041.760] (II) LoadModule: "glx"
    [ 19041.760] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 19041.782] (II) Module glx: vendor="NVIDIA Corporation"
    [ 19041.782] compiled for 4.0.2, module version = 1.0.0
    [ 19041.782] Module class: X.Org Server Extension
    [ 19041.782] (II) NVIDIA GLX Module 260.19.44 Sun Feb 27 21:47:21 PST 2011
    [ 19041.782] (II) Loading extension GLX
    [ 19041.782] (II) LoadModule: "synaptics"
    [ 19041.782] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 19041.782] (II) Module synaptics: vendor="X.Org Foundation"
    [ 19041.782] compiled for 1.9.4, module version = 1.4.0
    [ 19041.782] Module class: X.Org XInput Driver
    [ 19041.782] ABI class: X.Org XInput driver, version 11.0
    [ 19041.782] (II) LoadModule: "record"
    [ 19041.782] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 19041.783] (II) Module record: vendor="X.Org Foundation"
    [ 19041.783] compiled for 1.9.4.901, module version = 1.13.0
    [ 19041.783] Module class: X.Org Server Extension
    [ 19041.783] ABI class: X.Org Server Extension, version 4.0
    [ 19041.783] (II) Loading extension RECORD
    [ 19041.783] (II) LoadModule: "dri2"
    [ 19041.783] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 19041.783] (II) Module dri2: vendor="X.Org Foundation"
    [ 19041.783] compiled for 1.9.4.901, module version = 1.2.0
    [ 19041.783] ABI class: X.Org Server Extension, version 4.0
    [ 19041.783] (II) Loading extension DRI2
    [ 19041.783] (II) LoadModule: "nvidia"
    [ 19041.783] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 19041.783] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 19041.783] compiled for 4.0.2, module version = 1.0.0
    [ 19041.783] Module class: X.Org Video Driver
    [ 19041.783] (II) LoadModule: "kbd"
    [ 19041.783] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
    [ 19041.783] (II) Module kbd: vendor="X.Org Foundation"
    [ 19041.783] compiled for 1.9.4, module version = 1.6.0
    [ 19041.783] Module class: X.Org XInput Driver
    [ 19041.783] ABI class: X.Org XInput driver, version 11.0
    [ 19041.783] (II) LoadModule: "mouse"
    [ 19041.783] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 19041.784] (II) Module mouse: vendor="X.Org Foundation"
    [ 19041.784] compiled for 1.9.4, module version = 1.7.0
    [ 19041.784] Module class: X.Org XInput Driver
    [ 19041.784] ABI class: X.Org XInput driver, version 11.0
    [ 19041.784] (II) LoadModule: "synaptics"
    [ 19041.784] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 19041.784] (II) NVIDIA dlloader X Driver 260.19.44 Sun Feb 27 21:31:52 PST 2011
    [ 19041.784] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 19041.784] (--) using VT number 7
    [ 19041.891] (II) Loading sub module "fb"
    [ 19041.891] (II) LoadModule: "fb"
    [ 19041.891] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 19041.891] (II) Module fb: vendor="X.Org Foundation"
    [ 19041.891] compiled for 1.9.4.901, module version = 1.0.0
    [ 19041.891] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 19041.891] (II) Loading sub module "wfb"
    [ 19041.891] (II) LoadModule: "wfb"
    [ 19041.891] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 19041.891] (II) Module wfb: vendor="X.Org Foundation"
    [ 19041.891] compiled for 1.9.4.901, module version = 1.0.0
    [ 19041.891] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 19041.891] (II) Loading sub module "ramdac"
    [ 19041.891] (II) LoadModule: "ramdac"
    [ 19041.891] (II) Module "ramdac" already built-in
    [ 19048.959] (**) Option "CoreKeyboard"
    [ 19048.959] (**) Keyboard0: always reports core events
    [ 19048.959] (**) Option "Protocol" "standard"
    [ 19048.959] (**) Option "XkbRules" "xorg"
    [ 19048.959] (**) Option "XkbModel" "pc105"
    [ 19048.959] (**) Option "XkbLayout" "de"
    [ 19048.959] (WW) Option "XkbVariant" requires an string value
    [ 19048.959] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    [ 19048.983] (WW) USB Mouse: No Device specified, looking for one...
    [ 19049.058] (II) USB Mouse: Setting Device option to "/dev/input/mice"
    [ 19049.058] (--) USB Mouse: Device: "/dev/input/mice"
    [ 19049.058] (==) USB Mouse: Protocol: "Auto"
    [ 19049.058] (**) Option "SendCoreEvents" "true"
    [ 19049.058] (**) Option "CorePointer"
    [ 19049.058] (**) USB Mouse: always reports core events
    [ 19049.058] (**) Option "Device" "/dev/input/mice"
    [ 19049.191] (**) Option "Buttons" "5"
    [ 19049.191] (==) USB Mouse: Emulate3Buttons, Emulate3Timeout: 50
    [ 19049.191] (**) Option "ZAxisMapping" "4 5"
    [ 19049.191] (**) USB Mouse: ZAxisMapping: buttons 4 and 5
    [ 19049.191] (**) USB Mouse: Buttons: 9
    [ 19049.191] (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
    [ 19049.191] (**) USB Mouse: (accel) keeping acceleration scheme 1
    [ 19049.191] (**) USB Mouse: (accel) acceleration profile 0
    [ 19049.191] (**) USB Mouse: (accel) acceleration factor: 2.000
    [ 19049.191] (**) USB Mouse: (accel) acceleration threshold: 4
    [ 19049.218] (II) USB Mouse: Setting mouse protocol to "ExplorerPS/2"
    [ 19049.510] (II) USB Mouse: ps2EnableDataReporting: succeeded
    [ 19049.510] (**) Option "Device" "/dev/input/mouse0"
    [ 19049.521] (--) Touchpad: invalid x-axis range. defaulting to 1615 - 5685
    [ 19049.521] (--) Touchpad: invalid y-axis range. defaulting to 1729 - 4171
    [ 19049.521] (--) Touchpad: invalid pressure range. defaulting to 0 - 256
    [ 19049.521] (--) Touchpad: invalid finger width range. defaulting to 0 - 16
    [ 19049.521] (**) Option "SHMConfig" "on"
    [ 19049.521] (**) Option "LeftEdge" "1300"
    [ 19049.521] (**) Option "RightEdge" "5900"
    [ 19049.521] (**) Option "TopEdge" "1100"
    [ 19049.521] (**) Option "BottomEdge" "5200"
    [ 19049.521] (**) Option "FingerLow" "25"
    [ 19049.521] (**) Option "FingerHigh" "30"
    [ 19049.521] (**) Option "MaxTapTime" "180"
    [ 19049.521] (**) Option "MaxTapMove" "220"
    [ 19049.521] (**) Option "VertScrollDelta" "100"
    [ 19049.521] (**) Option "VertTwoFingerScroll" "on"
    [ 19049.521] (**) Option "MinSpeed" "0.06"
    [ 19049.521] (**) Option "MaxSpeed" "0.6"
    [ 19049.521] (**) Option "AccelFactor" "0.0040"
    [ 19049.541] (EE) Query no Synaptics: 6003C8
    [ 19049.541] (--) Touchpad: no supported touchpad found
    [ 19049.542] (EE) Touchpad Unable to query/initialize Synaptics hardware.
    [ 19049.558] (EE) PreInit returned NULL for "Touchpad"
    Running synclient returns the following:
    Couldn't find synaptics properties. No synaptics driver loaded?
    Running syndaemon returns the following:
    Unable to find a synaptics device.
    The Touchpad is still working, but changing options in the xorg.conf or the 10-synaptics.conf doesn't have any effect anymore. For example, I can not enable VertTwoFingerScroll, what was no problem before the error occured.
    The section for the touchpad in /proc/bus/input/devices is the following:
    I: Bus=0011 Vendor=0002 Product=0007 Version=81b1
    N: Name="SynPS/2 Synaptics TouchPad"
    P: Phys=isa0060/serio1/input0
    S: Sysfs=/devices/platform/i8042/serio1/input/input5
    U: Uniq=
    H: Handlers=mouse0 event5
    B: EV=b
    B: KEY=6420 0 30000 0 0 0 0 0 0 0 0
    B: ABS=11000003
    I tried the following:
    Removing the 10-synaptics.conf and commenting out the touchpad-section in the  10-evdev.conf
    Adding the line MatchDevicePath "/dev/input/event*" to the 10-synaptics.conf
    Thanks for help

    I commented the whole
    #Section "InputDevice"
    #       Identifier  "Synaptics Touchpad"
    #EndSection
    part
    and the appropiate line
            #InputDevice "Synaptics Touchpad" "SendCoreEvents"
    on Sever Layout.
    It stopped the EE error, touchpad works here
    but it's reverted to old "typing=accidentally doing clicks" since it got way too sensitive
    I can't run gsynaptics , synclient or syndaemon to fix it (as I used to)
    since I get
    drini ~ $ synclient
    Couldn't find synaptics properties. No synaptics driver loaded?

  • Array Size doesn't work correctly after "Auto-indexed Tunnel"

    Array Size returns value even if Empty Array is detected after "Auto-indexed Tunnel" tha generates 2D array.
    See example + VI with correct output as I expected.
    OR
    There is problem with generating 2D array --- It's empty. 1D array is generated in right way. 100 x 0 but not Emptu Array.
    Attachments:
    ArraySize_Bug.vi ‏9 KB
    ArraySize_Corrected.vi ‏19 KB

    Not a bug. This is correct behavior that is consistent with other parts of LabVIEW.
    The decision to handle multi-dimensional arrays like this was made long ago and is an enshrined part of the LabVIEW language spec. It will not be changed.

  • My iMessage doesn't work correctly after the upgrade to iOS 7 how do I fix this?

    I updated my phone with the latest upgrade to iOS 7 and my iMessage is not working on my phone or my iPad. How can this be fixed?  iMessage will start to send the message but it will not go. And if others send me iMessages then I don't get them. Please tell me how to fix this issue..

    Hi Charles. please read this article...Lightroom mobile unavailable to Education memberships | Kivuto
    Creative Cloud memberships purchased from a third-party provider (e.g. Kivuto) do not provide access to Creative Cloud services, including Lightroom mobile.
    Guido

  • My iphone 4 16gb white proximity sensor doesn't work

    I've only had my phone for about 2 weeks and hoped the last two updates would fix the problem, I can't stand the face-mute, face-hold anymore

    If you have a case on the iphone, remove and see if that helps.
    If reset, restore do not solve, then make an appointment at the genius bar or call Apple Support to arrange for a replacement.

  • Bluetooth w/ voice commands is not working correctly after 2.2 update and factory default.

    I  have been having numerous problems with my phone and now a problem with the Bluetooth.  I have a Sony Xlopd Stereo in my car with built-in Bluetooth capability.  I have been able to use the phone connected to the Sony flawlessly for several weeks.  On an in coming call the Caller's name and the ringer would go through the speakers in my car.  When I wanted to place a call from the car I would press the Bluetooth button on my stereo, this would launch the voice command program on the Droid X and output the voice commands responses through the stereo and then dial the phone number I was trying to call.  Then I updated the phone to 2.2 and still maintained all the same Bluetooth capability.  However, after having other problems with the phone after the update I decided to do a Factory Rest.  After the rest it seemed to clear up some of my issues; except now when I re-paired the phone to my Sony stereo I have lost a lot of functionality.  For example, now when a call comes it does not announce the caller or ring through the stereo.  When I try to place a call through the stereo, the voice command program is no longer launched on the phone and it will not place a call.  I have to initiate the call through the phone itself and then the Bluetooth automatically picks up the call.  I have tried to wipe the paring from the phone and stereo and pair again with no luck.  I have also checked the volume settings and most settings on the phone.  This frustrating when trying to place a call.  I would not be so bad if I never had the capability, but now knowing that it was possible at one time I want it to work again. 
    Does anyone know if this functionality was lost after the update and my phone was still "stuck" between 2.1 and 2.2? 
    Or is there another problem with my device that can't be resolved? 
     I am open to any advice, since Verizon will not replace my phone that has signal and reception issues dropped calls, reboots randomly among other things and now this issue even though I pay $8 a month for warranty and pay my bill with four other phones.  
    I am really hating the Driod X with all the flaws and inconsistency..I miss my Blackberry.

    ridgey115 wrote:
    I was having the same problem with my X right out of the box. Using a Motorola T505 handsfree device. Turns out that it acts exactly as you describe if the screen lock security is enabled. Once I disabled that, it worked fine. It does take a few seconds for the voice prompts to activate, but other than that it works. Not sure if you use the extra screen lock security, but if you do, you may want to disable it.
    Its been so long that I thought about that issue but that is correct, when the device is locked using the password or swipe feature it does restrict the voice dialed from activating from bluetooth...

Maybe you are looking for

  • ODBC connectivity between Oracle 11G and MSSQL Server on Solaris 10

    When we were running in 10G, I was able to successfully configure hsodbc using unixODBC and freeTDS to allow for an ODBC connection between Oracle and MSSQL Server. A few weeks ago we upgraded to 11G and I've been struggling to get the connectivity (

  • How to see inbox/ other mail without closing the e-mail I'm writing?

    New Mac user seeks help! If I'm writing an e-mail, I don't seem to be able to switch to my in-box without closing and saving the e-mail first (it's like having an open dialogue box in windows, where you can see but not access the program underneath u

  • InDesign CS4 won't open at all!   I'm doomed!

    What happened? I've been using InDesign CS4 (bought the master collection) since March on my brand new MacBook Pro (2.93GHz Intel Core 2 Duo 4 GB 1067 Mhz DDR3) just fine...the other adobe updater ran and now..nothing. I click on the app and nothing

  • Binary File Reader to a Chart

    Hello All, Newbie having some trouble with reading a chart from a binary file. My problem may be with trying to use a binary file, I am not sure. The x axis time is not the same length as the actual test time. I have acquired a rms voltage from a VCR

  • Combine table 3 columns in a combo box?

    I need a combo box to display "lastName, firstName - phone". I have these 3 columns in my database. Can anyone provide a short cfc to xml script I could use to create an arrayCollection to use as a dataprovider for my combobox? I'm thinking along the