Proximity

Hi im new on my iPhone 4 and my english is not si Good please understand me.
And last week i upgrated my firmware form 4.1 to 5.1.1 until this time everythings are ok on my old firmware my proximity sensor working Good but in my new firmware not working my iPhone is black and o tried all the things restarted reset restored and turned my old firmware but nothing everythings goes the bad and yesterday in my room and it was so dark i saw on dial screen top the loudspeaker a red light if i close dial red light is closing if dial a number red light is turning on i thing the proximity sensor ia working as technique but not working as software bug what can i do please help me

1. When will content sharing be available for the SX10?
I am not sure what the latest information is right now, hopefully I will know more in the beginning of next week.
2. When or where can I download the Proximity software to pair with an endpoint from Windows/Mac.
The information will be available on the cisco.com/go/proximity site upon release. 
3. When is Cisco Collaboration Endpoint Software Version 8.0 available?
That is very difficult to answer at the moment. In this half of the year sometime (April - May). It is no way to give an accurate or even a reliable estimate right now.  In a few weeks we will know more.
/Magnus

Similar Messages

  • Unable to create web app items if Proximity Search is Enabled.

    I am using BC API to create web app items because I am getting the data from a third party website and wanted to save the data into web app by using BC API. I have a web app ( Name: "Map Overview" ) and the proximity search is enabled. When I test my script I got 404 bad request error but if I disabled the Proximity Search the item is created.
    Can someone help me on this?
    Thanks

    Let me know the page you are running the API call on, I'll have a look and see what gives.
    Thanks,
    Mihai

  • IPhone 5 proximity sensor not working! (iOS 6.0.1)

    iPhone 5 proximity sensor not working! (iOS 6.0.1)
    When I call , the screen is not locked(

    Remove any screen protectors and cases, does the problem continue?

  • My proximity sensor does not work on my iPhone 4

    My proximity sensor does not work on my iPhone 4

    Well, it can be fixed, however it is in a very difficult spot, and it may cost me more to replace than what I can get out of it. I don't care to pay for a replacement since my warranty is up, because I already have an iPhone 5. I want to sell the iPhone4, and not for $75 either because you can't make a phone call unless its on speaker. I didn't know what other people had to say, so I just wanted some feedback on my options. I'm sorry that I am not an expert on the iPhone hardware componets, because I actually work for a living. I don't have time to sit here and play on forums. Thanks for all you're help.

  • Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Windows 7 Pro x64 Driver Request

     Hello Microsoft Community,
    I'm trying to install the following:
    Product ID: Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card  
    Name: ORiNOCO Wireless PCI Network Card  
    Device ID: PCI\VEN_168C&DEV_0013&SUBSYS_0A1014B7, PCI\VEN_168C&DEV_0013&SUBSYS_0A6014B7.  
    Problem: None of the drivers for Windows 7 X64 has worked to install in devmgmt.msc  Please advise where Windows 7 Drivers can be downloaded.
    [Please note I've tried the following and had no success: 4.2_JP2_Vista , 4.2_Vista , 4.2_whql , ORiNOCO_v31219 , V2.2.0 software , wpn311_2_0_setup]
    I have submitted the following to Proxim Tech Support :
    Support Request Submitted: 20284
    Thank you! Your support request has been submitted and one of our technical support members will be in touch shortly.
    Details
    Subject
    Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Windows 7 Pro x64 Driver Request
    Status
    New
    Severity
    Medium
    Type
    Support Request
    Reason
    Driver / Software Installation
    Request Date
    Jan 12, 2015 05:31:26 am PST
    Product
    Serial Number
    Warranty / ServPak
    N/A
    ServPak Reference
    Description
    Hello Proxim Tech Support,  Product ID: Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card   Name: ORiNOCO Wireless PCI Network Card   Device ID: PCI\VEN_168C&DEV_0013&SUBSYS_0A1014B7, PCI\VEN_168C&DEV_0013&SUBSYS_0A6014B7.  Problem:
    None of the drivers for Windows 7 X64 has worked to install in devmgmt.msc  Please advise where Windows 7 Drivers can be downloaded.  Thanks, Kent C.
    Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Windows 7 Pro x64 Driver Request
    Status
    New
    Severity
    Medium
    Type
    Support Request
    Reason
    Driver / Software Installation
    Request Date
    Jan 12, 2015 05:31:26 am PST
    Product
    Serial Number
    Warranty / ServPak
    N/A
    I will update thread with their reply as nothing, even Driver Genius Professional 11 has located the actual working driver. Once an update is verified, I will post back to this thread since I couldn't find the right answer online.
    THIS BTW I TESTED IS INCORRECT [You may verify if you don't believe such] :
    http://www.experts-exchange.com/Software/System_Utilities/Q_26292317.html <- That didn't work [Found driver online via Google] and link isn't working anymore in that post.
    This is related to this thread here:
    https://social.technet.microsoft.com/Forums/windows/en-US/668ac1f0-4560-4bd3-8848-c4fcdc70c10a/wanted-atheros-driver-for-windows-7-x64?forum=w7itprohardware
    Any assistance would be appreciated! Thanks..
    Kent C.

    Hi,
    About this issue, you need conatct proxim support to confirm if it could works fine in WIndows 7 platform and how to get the proper driver package.
    Karen Hu
    TechNet Community Support

  • Problem with Verity and proximity operators

    Whenever I try to use a proximity operator in my search, I
    get no results. For example, when I use the proximity operator
    <PARAGRAPH>, knowing that the terms I use are in the same
    paragraph (I assume this is defined by the <p> tag?), I still
    get 0 results. Same with <NEAR>, using the same terms. I
    attached a code snippet. Any help?

    Whenever I try to use a proximity operator in my search, I
    get no results. For example, when I use the proximity operator
    <PARAGRAPH>, knowing that the terms I use are in the same
    paragraph (I assume this is defined by the <p> tag?), I still
    get 0 results. Same with <NEAR>, using the same terms. I
    attached a code snippet. Any help?

  • HT201412 my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help

    my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.

    Sounds like it may be a hardware issue.
    Please contact Apple Support in your country.
    Here is a list of numbers: http://support.apple.com/kb/HE57
    Regards
    J

  • Welcome to the Cisco Proximity Community!

    Welcome to the Cisco Proximity Support community. This community will be the main channel for providing feedback on the Cisco Proximity app. Here you can also create discussions and raise concerns and we will try to answer any question you might have.
    Before asking a questions we recommend you to take a look in the Frequently Asked Questions document to see if your questions has already been answered. This document also contains a Troubleshooting section, which can be useful if you are seeing any of the most common issues.
    Enjoy the application testing and we are waiting for your feedback!

    Not sure about fixing it... I managed to find the SQL and PL/SQL FAQ (for some bizarre reason the new forum only likes to show one announcement message at a time at the top - the FAQ is there).  Seems a lot of the old Jive tags like the noformat tags etc. seem to be defunct, so the FAQ is going to need some editing, and I don't know where to start in putting all the links right. (Sonya did warn us that links would be broken).
    For now, I've at least locked the FAQ thread (SONYA - Are all previously locked threads unlocked by default? that could be a pain)
    I can see this may take some time to resolve...
    BillyVerreynne wrote:
    Some URLs are broken (specifically the PL/SQL forum's FAQ - not sure if Blu fixed that in the meantime) - any means to get old postings' URLs to work consistently?

  • HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

    Hi folks,
    i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
    Can any one help me in this regard??

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

  • Proximity sensor stay's on in Iphone 4 since update to IOS 5.0.1

    Proximity sensor stay's on in Iphone 4 since update to IOS 5.0.1 No screen cover and worked fine prior to upgrade.

    Only lasted for awile. Then the problem resurfaced.

  • Proximity Sensor Not Working on Brand new Z2

    Hi, The Proximity sensor is not working on my new Xperia Z2. I have ran all the tests on the phone and they have failed. When Put up to the ear during a call the screen does not switch off and all the icons get pressed etc. This is VERY annoying as i cant even speak to anyone for a minute before im dialing someone else by mistake. All Software is up to date. SONY, What the soslution here? I will be taking it into the Sony Center here tomorrow but I dont want to be without my only buisness phone for 3-4 days.

    OK installed each update to the pre-installed apps one at a time and tested the proximity sensor after each. All fine till Sony TV Side view : quick remote. after instalation proximity sensor stopped working. after uninstall all working fine again.Seems this is the culprit but I will add my 3rd party apps one at a time just to make sure. 

  • Nokia x proximity sensor functionality issues?

    I'm using nokia x and found a setting (Turn on Proximity sensor) in it that states it will dim the display when attending a call .
    It works as like a light sensor (automatic brightness reduction) and it seems proximity sensor is not present.
    CPU z app shows a record for the proximity sensor but doesn't show any reading all the time.? Is this issue only on my device ?
    with regards,
    Pradeep V R

    No.. the display doesn't go black. On a first time after restart,  proximity works for one single time and display goes black and thats's the end.Sensor stops working.No touch response.No power button wake up.It doesn't  resumes whatever i do.Only thing to get display back again is when the call ends.When i turn off the setting, light sensor seems to work and dims display, but never wen't black.
    When i try CPU Z app after a restart, the proximity sensor reading shows 0cm and it never changes. Closing the app and opening it again shows null value.
    I do a factory reset and it doesn't change anything.
    with regards,
    Pradeep V R

  • Today I get issues with thte device. When I in a phone call, the screen don't auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently.

    today I get issues with my z10 device. When I in a phone call, the screen don’t auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently. can anyone help me with this?

    Same issue already several weeks.
    And we are not alone:
    http://forums.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/i...
    At all there is, I think, 4 threads in parallel about this issue at CB forums. One of the:
    ms.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/index5.html
    I already contacted BB Help at Twitter. Answer:
    Thanks for the information. It seems that you have installed an OS version higher than the one supported by your carrier on your device. Please contact your carrier to get the supported OS version and try the proximity and light sensors. Let us know if you need further assistance. Cheers. ^LFC.
    I did replay:
    You are confused me. Phone got updates over network automatically. On crackberry forum a lot of people from different countries and with Different OS version, but with the same problem. Hi, this is thread at CrackBerry: http://forums.crackberry.com/blackberry-z10-f254/proximity-sensor-906493/index3.html
    This my replay was 22 of march. No more answer from BB.
    I can't contact my operator - 3UK, because I bought my from on Amazon from Amazon. This phone not from operator - seller is Amazon.
    What I already done:
    For last week, I read, how to install OS using Sachesi and Autoloader. I used Sachesi to load 3 UK version, I installed autoloader from this links:
    http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
    This
    For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925
    Doesn't help
    And this:
    For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS
    No result.
    After install all of them phone wants to update to 10.2.1.2102 by air.
    BBVE in all versions sais: Can not obtain data from sensors.
    Dear BB support, please, can you explain, how to resolve this issue?

  • Proximity Sensor Doesn´t Work. How to fix it?

    I´am experiencieng a problem that many other iphone users may either.
    The proximity sensor doesn´t work. When i answer a phone call, the display doesn´t turn off, and everytime i keep dialing numbers, endind calls and a lot of other little things that are getting on my nerves.
    It seems apple couldn´r care less for those problems we are having, and nothing has been told or done. Thats good for us to see how much apple is concerned with customers.
    Anyway, is there a way to fix this annoying thing???

    this could be a few reasons,
    1. try and update the device to the latest firmware via itunes, to check you on are on 4.3 go to settings>general>about and under version, if is lower than 4.3, update the device
    2. if this fails remove any cases or screen protecters (silly, i know) that may block the sensor
    3. if that fails, take to the nearest apple store, and describe your problem, they will either replace a=or repair
    hope this helps
    chris

  • Verizon, please help! LG G2 proximity sensor bug!

    Verizon, please help, the update that you required me to do on 09/23/14 has a huge bug in it and I am fearful it has not only screwed up my proximity sensor but who knows may even have compromised the security of the phone.  The proximity sensor does not respond in dimly lit rooms at all.  You have to trick it by slowly swiping your finger across it just to hang up a phone call.  The power off button does not respond unless you hold it down to do a soft reset.  The "knock-on" feature does not work in dimly lit rooms either.  This is so frustrating as it was working perfectly before the update.  Please either send a fix update or allow us to resort back to the old software.  This phone is less than a year old and I do pay for the warranty, however have been warned that all replacement phones are just "refurbished" phones that may have worse problems. 
    So, please VERIZON, step up and fix this issue.  I have been into your store to discuss with sales guy and he said he would not file a warranty claim just yet.   This is crap.....please advise.

    https://community.verizonwireless.com/mobile/mobile-access.jspa#jive-content?content=%2Fapi%2Fcore%2Fv3%2Fcontents%2F1967494
    If you repair your phone it is a refurb phone.

  • HT201210 Is there a fix for Proximity sensor being messed up after upgrading to latest iOS 6.1.3?

    After upgrading to 6.1.3 the Proximity Sensor will not turn my phone's screen black so that other "buttons" are not pressed by my ear of by my face accidentally.
    It worked just fine before the update.
    And if there isn't a fix is it possible for me to downgrade to iOS 6.0, or 6.0.1 or .6.1?
    I have a 16GB 3GS, iOS version 6.1.3 (10B329), ATT, Model = MC135LL/A, Modem Firmware = 05.16.08
    Thank you in advance,

    I have taken it out of the case - I figured it would obstruct the sensor (also have no screen protector).
    Only thing I haven't tried from the Basic troubleshooting steps you mentioned was to "restore as new".
    That I did try it tonight (succesffully restored), BUT my problem still exists.
    You mentioned to go in the MAC store > Would they replace it (for free) if they reach the conclusion it's some sort of manufacturer faulty wiring even if it's a 3Gs (as an old model)?
    Would they still if phone had water damage (this I'm just curious - the phone didn't)?

Maybe you are looking for