Proxy adjustment doesn't remain.

Proxy adjustment doesn't remain. At start each time of adjustment of a proxy should be established anew. In what the reason? Yours faithfully, Rustem Aktemirov.

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.com/kb/Preferences+are+not+saved

Similar Messages

Imporing QT movies but set poster frame doesn't remain in iWeb

I've "set poster frames" in the Quicktime movies that I am importing into iWeb. They appear properly in my working iWeb file but the poster frame I've set doesn't remain after the site is published. The Quicktime poster frame goes back to black. Anyway to fix this?

you can of course set the QT background to any color, I use white, in the Export window. Blends into the background of my page which is also white.
http://web.mac.com/carartphotos/iWeb/Site/

Cs4 and w7 use default masks on adjustament doesn't work

Hi
i installed cs4 on a fresh install of w7
and use default masks on adjustament doesn't work
enabled or disabled ,every time i add an adjustamen layer ,photoshop add a blanck white mask
thanks
is there a cure?

wrong look the screenshot
i resized the screenshots

Time Machine Lock in Preferences window doesn't remain locked after a system reboot

I am not sure if this problem occurred in Lion or not, but in Mountain Lion, I'm noticing the lock in the lower left corner of the Time Machine preferences page doesn't remain locked after a reboot of the computer. Has anyone else noticed this issue? Is there a fix or is it a glitch that Apple will need to correct?

From the menu bar, select  ▹ System Preferences ▹ Security & Privacy ▹ General ▹ Advanced... ▹ Require an administrator password to access locked preferences: On.

My simple Inbound ABAP Proxy code doesn't work in PI 7.1 EHP1 SP3 ?

Hi,
I just installed and configure new PI 7.1 EHP 1 SP3 and i tried some simple abap proxy but seems like doesn't work.
Please advise what is missing base on my simple abap code below :
=================================================================================================
METHOD zpi711ii_si_syn_in_aaeproxy~si_syn_in_aaeproxy.
**** INSERT IMPLEMENTATION HERE **** ***
DATA: inputdata TYPE ZPI711MT_REQ_1,
outputdata TYPE ZPI711MT_RES_1.
CONCATENATE inputdata-mt_req_1-firstname ' ' inputdata-mt_req_1-lastname INTO outputdata-mt_res_1-fullname.
ENDMETHOD.
=================================================================================================
i have put some break on the CONCATENATE seems like inputdata-mt_req_1-firstname is empty ? why ?
The sample xml input is :
=================================================================================================
<n0:MT_REQ_1 xmlns:n0="http://www.abeam.com/sample/pi" xmlns:prx="urn:sap.com:proxy:ST6:/1SAI/TAS1190827B531A473B357B:700:2008/06/25">
<FIRSTNAME>This is a string 4</FIRSTNAME>
<LASTNAME>This is a string 5</LASTNAME>
</n0:MT_REQ_1>
=================================================================================================
Please advise
Thank You and Best Regards
Fernand

Hi Fernand ,
Few things to check :
1. hope you are accessing the correct node of proxy structure and the correct message type too.
2.. If the occurrence of node is 1 to many than it will be a table type in that case your need to use a loop to access row values.
Make sure that you have used the correct message types for creating variables..
DATA: inputdata TYPE ZPI711MT_REQ_1,
outputdata TYPE ZPI711MT_RES_1.
--->inputdata-mt_req_1-firstname ' ' inputdata-mt_req_1-lastname
>once you have created the variable of particular messagetype than you have to use in this format inputdata-firstname and inputdata-lastname. seems some thing fishy here...inputdata-mt_req_1-firstname/lastname.
Regards ,

ABAP Proxy outbound doesn't work

Hi All,
I want to develop an ABAP Proxy to SQL server scenario.
So, I created a interface in Integration Builder and created a proxy on outbound message interface in SPROXY.
When i execute sender program in R3 , it works fine, but It doesn´t reach the PI system.
Outbound message t doesn´t appear in SXMB_MONI in R3 nor Pi system.
What is wrong?
Thanks, in advance
Carme

Our basis team has changed the hostname of our R3 QAs system , but no changes are made in SLD of Pi system.
I think this could be the cause of this issue.
¿can anyone confirm this point?
If yes, ¿what must i do to recover this functionality?
Thanks,
Carme

Itunes volume adjust doesn't take in ipod

i ripped an audio book on my imac because the optical drive on my powerbook stopped working. then i moved the audio book over to my powerbook and put it on my ipod. the volume was too soft so i adjusted it in itunes and resynched.
there was really no change except that on my ipod, when i turn up the volume, the volume stops increasing when the volume slider is about halfway across the screen. the slider keeps moving, but the volume stops increasing.
what can i do? any thoughts? help!!

No, I'm in Australia. Itunes 'volume adjustment' USED to work...but it *doesn't* anymore...;/??
I even updated the latest itunes...but still *nothing*

How can I stop Firefox from re-setting its internet connection configuration every time I re-open the browser? It should stay at "no proxy" but doesn't.

In the past couple of days, every time I close Firefox 8.0, it re-sets the internet configuration to "manual configuration" -- which generates a "proxy server refusing connections" error message. I have to re-set to "no proxy" every time I re-open the browser. This never happened before yesterday. What can I do to make the "no proxy" setting an automatic default on opening? ISP is Verizon high-speed.

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.com/kb/Preferences+are+not+saved

Web Service Proxy wizard doesn't open up in edit-mode anymore

I've created a web service proxy project for my existing bpel processes and since the bpel processes server has changed, the endpoint has changed as well.
When I update the endpoint in the <webservicename>_Stub.java file from the webservice proxy client everything works fine.
But when I try to go back in edit-mode inside the wizard, the wizard complains about the old endpoint url of the bpel process. If I search in the project after that specific hostname, I can't find any file or folder referring to the old url.
Could somebody explain me why I can't invoke the wizard anymore for a web service proxy client if the endpoint has changed?
Kind Regards,
Nathalie

Hi Nathalie,
Which version of JDeveloper are you using?
With the latest release, 11g Tech Preview 2, I don't think you can re-enter the wizard by double-clicking on the service proxy icon on the application navigator tree.
From the context menu, the only option is to edit handlers, add custom mapping, security or reliability.
I have found that using ant-based tasks is a better way to get predictable and reproducable outputs, even if the learning curve is not easy.
Here is just a snippet to give you a concret sample:
<target name="genproxy">
 <delete dir="./gen_src"/>
 <o :genProxy wsdl="http://${endpoint.host}/pge/webservice?WSDL" output="./gen_src"/>
 <o :genProxy wsdl="http://${endpoint.host}/pge/webservice?WSDL"
 mapheaderstoparameters="true" databinding="false" output="./gen_src"
 packagename="com.selectg"/>
</target>Hope it helps,
-Eric
I add an extra space in the XML, so that the o: prefix is displayed in the XML snippet
Message was edited by:
erajkovi

After setting the reverse proxy, SSO doesn't work

Hi,
We are facing a problem after setting a reverse proxy. ITS&SSO is working fine for internal users but the problem is with the external users;ITS is working fine for external users but SSO is not working. Does anyone can help us out with this problem ? It is kind of urgent.
Thanks
Serkan

Eric,
Sorry for misunderstanding,
The domain for internal/external users are the same https://external.global.rexam.net/irj/portal
internal.global.rexam.net/irj/portal
But the ITS goes through:
bca.rexam.com

Proxy authentication doesn't work with JSSE

Hello,
Seems like there is no common way to authenticate with proxy for HTTP and HTTPS.
Connecting to http://... - works fine, but https://... returns error message:
Unable to tunnel through 111.111.111.111:8080. Proxy returns "HTTP/1.0 407 Proxy Authentication Required"
(IP address is intentionally changed in the message above)
I'm using JSSE with VAJ JDK 1.2 and here is a Java code snippet that works well with HTTP connections:
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
System.setProperty("java.protocol.handler.pkgs",
"com.sun.net.ssl.internal.www.protocol");
System.setProperty("https.proxyHost", proxyHost);
System.setProperty("https.proxyPort", proxyPort);
System.setProperty("http.proxyHost", proxyHost);
System.setProperty("http.proxyPort", proxyPort);
try {
URL url = new URL("https://www.sun.com");
URLConnection connection = url.openConnection();
String authString = proxyUserID + ":" + proxyPasswd;
String encodedAuthString =
"Basic " + new sun.misc.BASE64Encoder().encode(authString.getBytes());
connection.setUseCaches(false);
connection.setRequestProperty("Proxy-authorization", encodedAuthString);
Listening to the network traffic helped me to understand that there is a difference between the way HTTP and HTTPS is handled. For some reason HTTPS ignores all the headers that I specify using setRequestProperty().
Here is example of request and responses sent by HTTPS handler:
Request:
CONNECT 198.175.98.32:443 HTTP/1.0
User-Agent: JSSE
Proxy response:
HTTP/1.0 407 Proxy Authentication Required
Date: Wed, 07 Nov 2001 22:04:11 GMT
Content-Length: 233
Content-Type: text/html
Server: NetCache (NetApp/5.1R2D4)
Proxy-Authenticate: basic realm="NETCACHE2"
Please note that there is no Proxy-authorization header in the request above.
Compare it with HTTPS request sent by Netscape browser:
Request to proxy:
CONNECT www.sun.com:443 HTTP/1.0
Proxy-authorization: Basic am0vbDphrGxHa22lLg==
User-Agent: Mozilla/4.76 [en] (Windows NT 5.0; U)
Response:
HTTP/1.0 200 Connection established
Proxy-Agent: NetCache NetApp/5.1R2D4
So, the question is:
What is the best way to pass "Proxy-authorization" header to proxy server??
Thanks in advance for your time.

Hi Guys,
Just like, i assume, all of you, i've had my battles with javas' handling of https comms from behind a firewall. I'm actually amazed at how something that is a simple combination of protocol and security should become so messy.
Luckily , i managed to get all my requirements met, but the sad thing is after all that hard work, i'm not much closer to understanding why the standard java sdk (im using 1.4) forces us to endure such painful tasks.
Really, Java is quite a mature language now, and one of its touted benefits is its applicability to web and internet technologies... so why the messy proxy code when dealing with ssl?
Anyway, i didn't really come here to b**tch, but rather to point you all to a handy library from apache - httpClient - http://jakarta.apache.org/commons/httpclient.
After implementing ssl proxy tunnelling and all the fun that goes with it, i found this tool, and subsequently deleted all that ugly code, and let http client deal with all that for me.
Its seriously simple, heres a snippet:
httpClient = new HttpClient();
httpClient.setTimeout(responseTimeoutMillies);
Protocol myHttps = new Protocol("https", new SSLContextBasedSocketFactory(sslContext), targetServerPort);
httpClient.getHostConfiguration().setHost(targetServerHost, targetServerPort, myHttps);
if (useProxy)
     httpClient.getHostConfiguration().setProxy(proxyHost, proxyPort);
        httpClient.getState().setProxyCredentials("my-proxy-realm", proxyHost, new UsernamePasswordCredentials(proxyUser, proxyPassword));
}This initialises the client, and after this, making http requests is simple:
String response = null;
PostMethod postMethod = new PostMethod("/secure/blah.jsp"); // A HTTP Post
postMethod.setRequestBody("Hello there"); // this is the data in the http post body
int responseCode = httpClient.executeMethod(postMethod);
if(responseCode == 200)
    response = postMethod.getResponseBody();...
As you can see, its alot less painful. It certainly makes me feel better, knowing i don't have to support/maintain the ugly proxy tunnelling code. Give it a shot on your next project.
Hope it helps.
Regards
Marcus Eaton

Proxy Administrator doesn�t work...

Hi all
I have just instaled iPlanet Web Proxy 3.6 in a Windows machine and when i try to connnect to the Administrator Web page, it returns an error page. At the error log file, i saw this failure:
"the CGI program C:\Netscape\SuiteSpot\bin\admin\admin\bin\index.exe did not produce a valid header (program terminated without a valid CGI header (check for core dump or other abnormal termination)".
Can anyone help-me? Thanks.

Windows 2003 and XP are not supported platforms. Please see http://docs.sun.com/source/817-6778-10/relnotes36sp5_win.html#wp19243
for the list of supported platforms.
Thx!
Srikanth

Iplanet Proxy Administrator doesn�t work...

Hi all
I have just instaled iPlanet Web Proxy 3.6 in a Windows machine and when i try to connnect to the Administrator Web page, it returns an error page. At the error log file, i saw this failure:
"the CGI program C:\Netscape\SuiteSpot\bin\admin\admin\bin\index.exe did not produce a valid header (program terminated without a valid CGI header (check for core dump or other abnormal termination)".
Can anyone help-me? Thanks.

You may want to also post this to Proxy Server forum:
http://swforum.sun.com/jive/forum.jspa?forumID=112

SAP Connector Proxy Wizard doesn't start

Hi all,
I've just installed VS2003, the SAP .NET connector and the .net framework (1.1) on a freshly installed Windows XP pro machine. If I follow the various tutorials on the web I should be able to create a SAP proxy when doing the following:
- start VS2003
- create a new Windows Application (in C#)
- Add a SAP Connector Proxy
-- A wizard starts
And that is were it starts to go wrong. Instead of a wizard, I get the following:
<?xml version="1.0" encoding="utf-8" ?>
<wsdl:definitions targetNamespace="urn:sap-com:document:sap:rfc:functions" xmlns:s0="urn:sap-com:document:sap:rfc:functions" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:types>
 <xsd:schema targetNamespace="urn:sap-com:document:sap:rfc:functions" xmlns:s0="urn:sap-com:document:sap:rfc:functions" xmlns:xsd="http://www.w3.org/2001/XMLSchema"></xsd:schema>
</wsdl:types>
<wsdl:portType name="dummy.PortType"></wsdl:portType>
<wsdl:binding name="dummy.SAPBinding" type="s0:dummy.PortType" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
 <s0:binding style="rfc" />
 <wiz:GeneratorSettings xmlns:wiz="urn:sap:mw:dotnet:wizard">
 <wiz:ProxyType>Client</wiz:ProxyType>
 <wiz:ClassName>SAPProxy1</wiz:ClassName>
 <wiz:Beautify>True</wiz:Beautify>
 <wiz:CreateAsyncs>False</wiz:CreateAsyncs>
 <wiz:CreateQRFC>False</wiz:CreateQRFC>
 <wiz:CreateTRFC>False</wiz:CreateTRFC>
 </wiz:GeneratorSettings>
</wsdl:binding>
<wsdl:binding name="dummy.Binding" type="s0:dummy.PortType" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
 <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" />
</wsdl:binding>
</wsdl:definitions>
Does anyone know what could be wrong here?
Thank you and kind regards,
Thomas

Hi Thomas,
With the newer version of NCo (> 2.0) there is no wizard. You would have to drag and drop the RFC/BAPI from the server explorer window of visual studio.
First open the solution explorer, click on the SAP icon. Specify the credentials. And then from the list of RFC/BAPI drag and drop on SAP connector proxy page(design view). You can also specify the filter to restrict the listing of RFC/BAPI.
Regards.

Under Tiger 10.4 Brightness Adjustment Doesn't Work, Powerbook 17"

After trying Leopard, I decided to go back to Tiger. After installing 10.4 on my Powerbook G4 17" 1.67ghz the brightness adjustment in the system preferences and the F1 F2 keys do not work. Brightness adjustment is not available even after running all the updates through 10.4.11. If I return to Leopard, the brightness adjustment works again. Any one have any ideas on how to fix it in 10.4? [I don't have the original restore disks]. Thanks.

Not certain, but PRAM or NVRAM resets might do it...
Resetting your Mac's PRAM and NVRAM
http://docs.info.apple.com/article.html?artnum=2238

Proxy adjustment doesn't remain.

Similar Messages

Maybe you are looking for