Proxy authentication for Internet N8 - Symbian 3

Hello, Who can help me with proxy authentication for internet N8, i can configure proxy adress and port but i need user name and password, i can't find it.
Please if anybody know it, help me.
Thks,
Cristian

Curious, I have not observed many of the issues you indicate.
0. Haven't had issues, but haven't really paid attention either.
1. This works very nicely for me. Switches to known WiFi when available and automatically uses 3G when not.
2. Have not observed.
3. Lots of apps are missing or don't work on S^3 - terrible shame.
4. It's a **bleep** app so don't worry about it. Half-baked junk, IMO.
5. Yep, it's bad.
6. No problem for me here. Entered Ovi credentials when phone first started up and haven't had to do it anywhere else or ever again.
7. Try Windows Media Player for sync. As for other issues, have not observed any of them.
Have not tried the rest.

Similar Messages

How can I make "No Proxy" the default for accessing the internet?

How can I make "No Proxy" the default for accessing the internet?

*Tools > Options > Advanced > Network : Connection > Settings
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

User Authentication for Internet access

Hi,
Is it possible to configure authentication for internal (LAN) users to Authenticate (local/RADIUS/LDAP) for any kind of internet access through the ISA550/570? (like cut-through authentication proxy in ASA.)
And Can the ISA550/570 act as a Web proxy?
Thanks in advance.

HI Sulu,
You can configure captive portal for internal LAN users to authenticate (local/Radius/LDAP) for internet
access through ISA500. (see attached screenshot)
ISA500 cannot act as a web proxy. what is your use case ?
Regards,
Wei

Design validation for Internet over MPLS

We have a Network on MPLS backbone with dual service provider.
There are 50 spoke location.
DC and DR location
Topology is hub and spoke with all sites accessing data hosted at primary DC.
ALso in case of disaster all the spoke sites will connect to DR site.
Servers at DR site are on unique IP and failover from DC to DR is taken care by BGP routing intelligence.
Aim is to give controlled internet access to all the spoke sites from DC and incase of failure internet should be available from DR site.
As per our design architecture we are planning to upgrade the last mile bandwidth and MPLS port of all spoke sites and central site MPLS port bandwidth to give integrated access on the same last mile for all the locations.
Both types of traffic private and public will ride on the same MPLS bancbone and come to the primary DC site CE router.
At CE router we will segreggate the traffic meant for datacentre and internet cloud.
We will also deploy firewall and separate internet router and proxy server for the proposed internet connectivity to control the spoke sites traffic.
Is this a good design.
Pls suggest with configuration on how are we going to achiecve this
Also currently we are using BGP between CE-PE --- it should take care of the global routing meant for Internet traffic by flooding default route across all the spoke sites
Pls fins the existing architecute attahced.
Any inputs on the same will be appreciated.
Regards

As per your post you are looking for the solution to route internet via DC and on failure via DR.
To do this you can inject default routes from both DC and DR. in doing this all the PE's in SP1 and SP2 will have 2 defaults in the VRF table for you. But only 1 would be installed based on regular BGP path selection process.
To manipulate and select default from DC you can change any BGP path attribute and make the DC default favourable over DR default.
I did not understand where you are doing PBR, but anyway PBR will work in sync with CEF without putting any load on you CPU since IOS 12.0. So you can run PBR whereever you are running it.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_c/fqcprt1/qcfpbr.htm
To answer is this a good design or not, more inputs would be required as the current diagram is insufficient with legends, and the logic behind the creation of 3 vlans in the diagram is not explained in the post.
Its not clear which site are you designating as spoke site, as the remote sites box has dual routers and dual connections.
Since a good design of a network is more of what your data flow and business needs are and then based upon it, the technical design should meet the requirements put forth and scale as well at the same time. Here if you agree we dont have any of those inputs as well.
HTH-Cheers,
Swaroop

Using 2nd Built-In Ethernet port for internet access?

Hello,
I have a Quad-G5 running 10.4.8. In its current configuration, all its network communications, including web access, go over the active ethernet port (Built-in 1).
Does anyone know how I could use the second built-in port for internet access only? I'd like to route local traffic over the first port, but go "out" over the second.
The machine is on a corporate network, and proxy access is slowwww. I have the ability to use a direct connect to the internet, but still need to be connected locally. Any thoughts? Many thanks . . . JD

Easy. Go to System Preferences > Network > Network Port Configurations and drag the port connected to the internet to the top, so that it has priority over the port connected to your LAN. This prevents DNS time-out when loading a website, but still allows LAN traffic over the other port because that traffic is most likely going to use ARP rather than DNS. For good measure, you can add your company's domain (such as "my_company.lan") to System Preferences > Network > Internal_Ethernet > TCP/IP > Search Domains.

EP implementation for Internet users

Hello,
I need to Implement EP for internet and intranet users, in which for internet users I need to fetch the summary data of R/3 applications.
how shall we proceed with the implmentation of portal for internet users, pls suggest some blogs showing portal implementation for internet users.
Regards
Vishal

Hi,
To make available portal for both internal and external users, you've to setup a reverse proxy in DMZ. Your portal will reside in intranet and external (internet users) will access portal via reverseproxy.
For reverseproxy there are 3 main options.
- Apache as a ReverseProxy
- ReverseProxy with IIS and ISAPI Filter
- Using Web Dispatcher as reverse proxy.
Now look at the following diagram;
    EXTERNAL USERS                INTERNET
          |
     REVERSEPROXY                 DMZ
PORTAL SERVER                     INTRANET
Internal Users will access portal normally with/without SSL. External Users will access portal with/without SSL via RProxy.
This is how we setup and working well. We Used Apache as ReverseProxy on SuSe with SSL enabled.
But testing WebDispatcher on SuSe for load balancing.

Apex3 on XE over SSL for internet users

Folks,
I've been thrown in the deep end - I've created an Intranet in Apex3 on XE and now I need to make it available to outside parties over the internet. Due to the nature of the content it really should be only be available over SSL.
I have seen by other posts that suggest running Apache as a proxy for XE/Apex is the way to go and found what I thought was the answer on Apache's site (http://httpd.apache.org/docs/2.2/ssl/ssl_howto.html) as well as defaulting Apache to an Apex site (APEX charts and reverse proxy (Houston we have a problem!!)
However I don't seem to be able to marry up these settings (not being an Apache guru) into one solution for Apache defaulting to an Apex app (for intranet users) AND the same app but running under SSL for internet users !
Any assistance would be greatly appreciated !!

Wayne,
This is discussed on the XE forum over here:
How to Enable SSL in Oracle XE
Joel

Proxy authontication popup for Https is not getting displayed

Hi,
We have proxy server in java, and it should ask for the authentication, while using old versions of IE (IE6), opera we get proper proxy authentication prompt for Https as well as Http request.
But with the new version of browser IE8, Firefox 2, ... 3 we are not getting the Proxy authentication prompt for the Https request only (for http its working fine)
Actually the proxy server ask for authentication for the every first request only, but if the first request is Https then it fails with 407 error, as per the logic whenever we set response.setStatus("407"); response.setMessage("Proxy authentication required"); it should prompt for the proxy authentication and its working fine for old browsers and for Http request but its not working for new browser with Https request
Could you please provide some information on how to achieve proxy authentications for Https and new versions browsers.
Following are the code used for it
/*ResponseProcessor.java*/
     public static Response createResponse(ScriptableConnection connection, String message) {
          Response response = new Response();
          Request request = connection.getRequest();
          response.setRequest(request);
          if (message.equals(SPConstants.TECHNICAL_ISSUES)) {
               response.setContent(message.getBytes());
          if (message.equals(SPAuthorizationConstants.INVALID_CREDENTIALS)) {
               //response.setVersion(request.getVersion());
               response.setHeader("Proxy-Authenticate", "Basic");
               response.setStatus("407");
               response.setMessage("Proxy authentication required");
               if (request.getHeader("Proxy-Authorization") != null) {
                    response.setContent(message.getBytes());
               return response;
          return response;
/*ConnectionHandler.java */
public void run() {
String authorizationStatus = RequestProcessor.checkUserPreRequiste(request,user,ticket,statusVisitor); //SP CODE
                    if(authorizationStatus.equals(SPAuthorizationConstants.USER_IS_AUHTORIZED)) { //SP CODE
                             try {
                                  response = hc.fetchResponse(request);
                                  if (response.getRequest() != null)
                                       request = response.getRequest();
                                             }catch........
                   } finally {
               try {
                    if (_clientIn != null)
                         _clientIn.close();
                    if (_clientOut != null)
                         _clientOut.close();
                    if (_sock != null && !_sock.isClosed()) {
                         _sock.close();
               } catch (IOException ioe) {
                    _logger.warning("Error closing client socket : " + ioe);
.......Thanks in advance,
Sachin

Hi
Follow the steps
In your current view where you create your Popupwindow; create a model attribute name "popWin" of type IWDWindow;
In code;after creating the popup window assign window object to the context element
IWDWIndow window = WDComponentAPI.getWindowManager().createWindow( WindowInfo, true);
wdContext.currentContextElement.setpopWin( window);
At the Popup window view; create a model attribute name popWin of type IWDWindow and map it with the one that created before.
set the code on btnaction
IWDWindow popwin = (IWDWindow)wdContext.currentContextElement().getPopWin();
popwin.destroyInstance();
This will work
Regards
- Vinod
Edited by: Vinod V on Mar 3, 2008 7:21 PM

I desperately to uninstall adobe reader from my Mac book air. I sent adobe reader to trash and afterwards look for internet plugs in in library but the folder is empty. Can anybody help me?

I desperately need to uninstall adobe reader from my Mac book air. I sent adobe reader to trash and afterwards look for internet plugs in library but this folder is empty in my library. Can anybody help me?

I looked for plugs in in my library but the folder internet plugs in is empty

Can I hook up a windows computer to my airport time capsule for internet access?

We have hooked up our time capsule for the first time today. It works wonderful on our apple products BUT can I connect a windows based computer to it for internet access?

Yes. Both Ethernet and 802.11 are cross-platform.
(109122)

What is the easiest way to check for internet connection in C#?

Hi!
I searched a lot but I didn't get my answer. I'm looking for the easiest way to check for internet connection. Can you help me?
Thanks a lot.

Hi Pouya Ebrahimzadeh,
I suggest you could connect a site to check if it can be opened.
Public Shared Function CheckForInternetConnection() As Boolean
Try
Using client = New WebClient()
Using stream = client.OpenRead("https://msdn.microsoft.com/")
Return True
End Using
End Using
Catch
Return False
End Try
End Function
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ISA B2B logon Error: No valid private connection for internet user

Hello ,
i used isauseradm to create a user zzweb with all authorizations for B2B..
now when i try to log to
http://host:port/b2b/b2b/init.do with the user zzweb
i have a runtime error with the logs :
EXCEPTION]
#1#com.sap.isa.businessobject.BORuntimeException: Error getting private connection for internet user:com.sap.isa.core.eai.BackendException: Error: No valid private connection for internet userzzweb
     at com.sap.isa.businessobject.BusinessObjectHelper.splitException(BusinessObjectHelper.java:78)
     at com.sap.isa.user.businessobject.UserBase.login(UserBase.java:313)
     at com.sap.isa.businessobject.User.login(User.java:143)
     at com.sap.isa.user.action.UserActions.performLogin(UserActions.java:295)
     at com.sap.isa.user.action.UserActions.performLogin(UserActions.java:368)
     at com.sap.isa.user.action.UserBaseAction.performLogin(UserBaseAction.java:126)
     at com.sap.isa.user.action.LoginBaseAction.ecomPerform(LoginBaseAction.java:77)
     at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
     at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.tealeaf.capture.LiteFilter.doFilter(Unknown Source)
     at com.sap.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:61)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:373)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
what does this error means..?
i also realised that zzweb was not created in CRM backen? should it be created ?
many thnx for help ..
Message was edited by: Blackman

Its a late response... but if someone gets the same issue here is the solution.
When you register try uppercase password . That should take care of that issue.
The problem is with function module CRM_ISA_IUSER_SWITCH , Note 946536.
Although the note says 5.0 the problem exists with ISA 4.0 too

Use airport for internet and ethernet for local?

Hi. Ive searched around and cant find an answer for this.
I have a 27" imac connected to my router and all works fine for accessing the internet.
I have several other devices close by that I want to connect via ethernet. If i connect the imac to another router via ethernet I can browse my local devices but loose internet connectivity. It is as if the imac will suspend the airport connection while the ethernet cable is connected. I don't want my second router to act as a bridge as it doesn't support N speeds.
Essentially, I want the imac to use airport for internet and the ethernet port for local files.... The only workaround I have is to unplug the ethernet cable from the back of the imac when i want to use the internet. I'm hoping it's just a DNS issue, but cant seem to resolve it.
I do not need internet connectivity for the other devices and don't see how i can do that without enabling the wireless side of my second router and then creating a bridge...
Any suggestions?

It is as if the imac will suspend the airport connection while the ethernet cable is connected.
The Connection Order on your iMac is set so that if both AirPort and Ethernet are "on", the iMac will give priority to the Ethernet connection.
If you want to configure your iMac so that it gives priority to an AirPort connection if both AirPort and Ethernet are "on", give this a try:
Open System Preferences (gear icon on the dock) and open Network
Click on the small gear icon at the bottom of the connection list on the left
Click on Set Service Order and drag AirPort to the top of the connection order list
Click OK, then click Apply
Now, if both AirPort and Ethernet are active, your iMac will give priority to the AirPort connection. If you want to connect using Ethernet, you will have to turn AirPort off by clicking the fan shaped AirPort icon at the top of your computer screen.

How can I know if the version of Flash Player installed is the right version for Internet Explorer?

Hello,
I have Windows 7 Starter with Internet Explorer 8 and Adobe Flash Player 10,1,85,3.
I am experiencing problems with one particular web site which uses Flash technology to operate its web site., which is:
gadget-detective.moonfruit.com.
It has been suggested to me that I check I have installed the correct Flash Player for the web browser
I am using which is Internet Explorer 8, that in particular I should check I have not installed in error a Flash Player
for "other browsers". I do not know how to check if the version of Flash Player I have installed is the correct one for
Internet Explorer, but, when I go to the Adobe web site at:
http://www.adobe.com/software/flash/about/
it states that Flash Player is successfully installed.
Here are the problems I have been encountering with accessing the above-mentioned "gadget-detective" web site,
where I have had to use different URLs to attempt to get access to the technical advice areas on their web site:
1)A Welcome page with a link to the Free Technical Advice page located someway down the centre of the Welcome page,
but still with none of the previous links along the left side:
http://www.gadget-detective.moonfruit.com/#/free-tech-advice/4515074362
2)A Welcome page with no links at the left side and in particular no link at all to the Free Technical Advice page:
http://www.gadgetdetective.com/
3)A completely black page:
http://gadget-detective.moonfruit.com/#/free-tech-advice/4537230823
How can I be certain that I have the correct version of Flash Player for my web browser Internet Explorer 8?
Regards.

Hello ʇɐb ɹəuəllıʍ ,
Thanks for your reply. I would appreciate it if you could let me know what the Flash Player setting
called "Hardware Acceleration" does, before I try disabling it.
Regards.

Is there a way to transfer the iTunes application to my PC using my iPhone? My PC has no means of connecting to the Internet and I do not wish to pay for Internet tethering for a one time use.

Is there a way to transfer the iTunes application to my PC using my iPhone? My PC has no means of connecting to the Internet and I do not wish to pay for Internet tethering for a one time use. I don't have the app on my computer and I simply wish to have it on there to actually be able to transfer my files.

You can transfer the app to your PC to save it, the article below will show you how:
iTunes Store: Transferring purchases from your iOS device

Proxy authentica​tion for Internet N8 - Symbian 3

Similar Messages

Maybe you are looking for

Proxy authentication for Internet N8 - Symbian 3