Proxy changes back to manual from auto

Proxy settings changes from Auto back to Manual. How to correct this issue. Dell support suggest re-installing Windows 8.1; I saw there must be a better/easier fix for this issue!? Any suggestions???

Hi,
Are there any domain or OU level GPOs applied? If Proxy setting has been controlled by GPP, then the end user can change the proxy settings back, but after some time or a PC reboot, the proxy settings will revert back to its original settings, you can
contact the domain administrator if you are in a domin environment.
If this is a standalone PC, then another situation is that the system might be infected by some virus which insists changing the settings. perform a security scan to ensure the PC safety.
We can alos change the proxy settings via registry (backup your registry before making any changes on registry)
http://support2.microsoft.com/kb/819961
Yolanda Zhu
TechNet Community Support

Similar Messages

How to organize by date in mobil me? (It changes back to manual)

How to organize by date in mobil me? (It changes back to manual)

Thanks, Niel.
Is there any way to sort the icons? I seem to recall there was a modifier key to hold while clicking the menu items but nothing works and I can't find anything searching "help".

Compact 7 Power Management: When does state change back to ON from User or System Idle?

OS Design: Compact 7
Headless system
BSP: AM335x (ARM7)
Using Full Power Management Catalog component.
Run Telnet to interact with device and through serial terminal app.
With monitoring app can see transitions from ON to UserIdle to SystemIdle due to Activity timeouts.
Can manually set mode back to UserIdle or ON.
But never see transitions back when loading system with software or network activity.
eg. 1 Create a loop forever app with two internal forloop (1000 loops each): Runthis on numerous telnet sessions<
Can see system degrade as responsiveness decreases.
eg 2. Continuously ping another system or from another system (network load)
So what is need to trigger a PM state transition back up the tree?

Thanks Dave for your reply.
That's what I am looking at doing.
But I'd like to see the inbuilt functionality working first. I can see the transitions down the stack due to Activity timeouts, but I would have thought the reverse would occur when the system does something.
I do have an app that "touches" the PM and thus bring the system back to ON.
Cheers David
DJaus Snr SW Dev (Embedded Systems and .NET)

Don't like ios7, can I change back to ios6?.

can I change back to ios6 from ios7?

Yes, if you buy a phone that is using iOS 6. You can't downgrade a phone that is using iOS 7.

Using auto detect proxy when I close web pages it goes back to manual proxy config help please

I was using the web o/k restarted my computer, tried to conect to the internet web page came up but would not turn over, said trouble with proxy. Looked in tool, options, advanced, setting. The box next to Manual proxy config was ticked. Changed to auto detect proxy clicked ok then ok. Next it had reverted back to manual proxy, is there a way to save this on auto proxy config as it is a pain having to change it all the time.
Thanks

See:
* http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

When I relaunch firefox 8 the proxy server settings reset back to Manual even after I change to autodetect

When I relaunch firefox 8 the proxy server settings reset back to Manual even after I change to autodetect

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

My auto-detect proxy keeps resetting to manual which won't allow me to access the web

Frequently when I click to refresh a page or open an new page I get this message:
"The proxy server is refusing connections
Firefox is configured to use a proxy server that is refusing connections.
* Check the proxy settings to make sure that they are correct.
* Contact your network administrator to make sure the proxy server is working."
Tools>Options>Advanced>Configure how firefox connects to the internet Settings> will show that once again, the browser changed itself from auto detect to manual. I change it back to auto-detect and hit save, sometimes it works right away, sometimes I have to do it 3-4x in a row in order for the change to "stick"

See:
* http://kb.mozillazine.org/Preferences_not_saved
* [[Preferences are not saved]]

Ios 6, my wifi doesnt work, even after switching wifi on and off, aswell as removing saved wifi spots and switching from manual to auto

ios 6, my wifi doesnt work
even after switching wifi on and off
as well as removing saved wifi spots
and tried switching from manual to auto
it works intermittently after these changes are made, but still shuts off.
i have ios 6 on both the iPhone 4 & the Iphone 5.
my router at home is D-Link router
please help!

You have the same problem in two mobiles? Uou....
I have had used D Link router before, and I faced problems to connect my computer.
Now I bought Netgear, and it shows strongly better than the f.... D Link...
Try:
Settings>>WiFi, and then turn off Ask for Conection;
Or:
Settings>>Privacity, be sure the Location Service is turn on;
Or:
In Settings>>General>>Reset, select "Reset all Adjusts". (Sorry, but it will change some personal adjustments, but will not delete anything at all)

Outlook Anywhere proxy changed from Basic to NTLM for external users

I have a Exchange 2013 environment that is also running Exchange 2010 coexistence (migrating). What is happening is autodiscover is handing out NTLM for the proxy settings and not basic. However when it is using NTLM we seem to get the password prompt over
and over. If I manually changed it to Basic then it works fine, but when autodiscover goes again it changes back to NTLM and prompts that the Administrator made a change and you need to restart Outlook.
I checked Outlook Anywhere and all my servers have Basic set for external users and NTLM set for internal.
I only have a few mailboxes on 2013 and 2010 mailboxes seem not to have a problem.
Here is an output for Outlook Anywhere on all six servers:
Identity : CAS01\Rpc (Default Web Site)
ExchangeVersion : 0.10 (14.0.100.0)
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm}
Identity : CAS02\Rpc (Default Web Site)
ExchangeVersion : 0.10 (14.0.100.0)
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm}
Identity : CAS03\Rpc (Default Web Site)
ExchangeVersion : 0.10 (14.0.100.0)
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm}
Identity : EXCH2K13-01\Rpc (Default Web Site)
ExchangeVersion : 0.20 (15.0.0.0)
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm, Negotiate}
Identity : EXCH2K13-02\Rpc (Default Web Site)
ExchangeVersion : 0.20 (15.0.0.0)
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm, Negotiate}
Identity : EXCH2K13-03\Rpc (Default Web Site)
ExchangeVersion : 0.20 (15.0.0.0)
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm, Negotiate}

Hi,
Please refer to the following KB to set the Outlook Anywhere settings on Exchange Server 2013 Client Access servers:
http://support.microsoft.com/en-us/kb/2834139
If it doesn’t work with the resolution above, please do the following checking in ADSI Edit:
1. In Adsiedit, expand Configuration-->CN=Services -> CN=Microsoft Exchange -> CN=domain -> CN=Administrative Groups -> CN=Exchange Administrative Group -> CN=Databases.
2. Right-click the listed database > Properties.
3. Check whether the msExchHomePublicMDB value is set to an available value. Please change the value to <not set>.
4. Click OK.
Then check whether the issue persists.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

My app store wont change back to sri lanka from the u.s store

Hi, I recently got my new ipod from sri lanka. I've been downloading apps and so on. One day i click on an app it says that this app is not available in sri lankan store would you like to switch us store [this is from the ipod not the pc] and i said yes. Now i cannot change back to sri lankan app store and it is stuck in the us store and cannot download any new apps. Please can someone tell me how to change back. I tried the way from the pc. settings>Itunes store>View my apple id> logged in> Change country/Region. its already on sri lanka, but from the ipod it says it is in the us store. I cannot change it since it says that no country is selected even though it is already selected in sri lanka and i cannot downloads app from the ipod, Please can someone teel me how to change it

See:
How to Change Your App Store Account Location | eHow.com
Are you located in Sri Lanka and is your account associated with Sri Lanka? They have to be to use the Sri Lanka store.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/

How do i stop my itunes from changing the location of my itunes media. i have it saved on a external HD and it keeps changing back to my local drive with out being told

how do i stop my itunes from changing the location of my itunes media. i have it saved on a external HD and it keeps changing back to my local drive with out being told

No, an external drive will not always be mounted. If the drive goes to sleep, it can unmount, or it may unmount for other reasons. As Chris said, confim that the drive is mounted and active before launching iTunes.
Regards.

I change my itunes account from UK to China as I goes back to China, how can I download my old purchased song in UK account?

Hi,
I used to live in UK and purchased many songs from Itune. Now I am moving back to China and bought a new device.
After I change my itune acc to China, I cant access my old purchase. Can you give me some advice on how to download the old songs?

You need to change back to UK account. All purchases are forever tied to the Apple ID that was used.
Settings > iTunes & App Stores > Apple ID: > sign out and sign in your UK Apple ID

I changed my apple id from the one I used to originally sign up to iCloud and now cannot login to iCloud - do I need to change it back to access iCloud?

I changed my apple id from the one I used to originally sign up to iCloud and now cannot login to iCloud - do I need to change it back to the original apple id in order to access iCloud?

Gosh, this is full of great information and I need something a little bit deeper - and because I'm not a techy - can I explain...Apple ID changed a year ago from a work email to a personal email. No longer have access to original email..... New email and Apple ID worked flawlessly until today - every 3 seconds Sign in to iCloud pops up.. with the old work email. I enter the password - which is the same... and it says invalid.
I tried to delete the icloud, but you need the password and it says "find my phone" is on... i turn it off, and it's the old email... and the password again doesn't work, of course.
I am left stratching my head... I sync my phone and my correct, up to date email is in the Apple ID sections...
What am I doing wrong.. talk slow to me please, lol.

TS1702 I'm presently in the Caribbean, and I updated my iPhone 4S to iOS 6. the update changed my iTunes account from the US to a Barbadian account. How can I switch back to my US account?

I'm presently in the Caribbean, and I updated my iPhone 4S to iOS 6. the update changed my iTunes account from the US to a Barbadian account. How can I switch back to my US account?

Sorry I'm so late responding; I've been away.
http://support.apple.com/kb/TS3694#error1611
The error means that your antivirus or firewall is blocking the update process.

Proxy changes back to manual from auto

Similar Messages

Maybe you are looking for