Proxy Error "Could not contact the other system"

Hi
I am getting this error when i run a report which a proxy.
Could not contact the other system
What i need to check?
Thanks

Hi Prabhu ,
Hope you are using ABAP client Proxy !!
I am getting this error when i run a report which a proxy.
Could not contact the other system
What i need to check?
At ECC side :
> Check the Transaction SLDCHECK is working fine
> RFC Destination LCRSAPRFC and SAPSLDAPI is working fine
> Entry is proper at SLDAPICUST Transaction
Please share the message at XI end as well as at ECC end of SXMB_MONI ?
Regards ,
Edited by: Santosh Rawat on Oct 22, 2009 9:55 AM

Similar Messages

  • ALI Search error: "Error - Could not contact the Search Service"

    Hi,
    I have installed Aqualogic Interaction with all its components.
    While trying to search for a string, it is throwing this error:
    "Error - Could not contact the Search Service".
    Unable to figure it out. Is this because of the search host settings?
    Where can I check/modify the search host settings? I am not able to find them.
    Can someone please help on this?
    Thanks in advance,
    Ashok

    The settings for the search server are located in Administration. Go to the utilities drop down, from here you should see Search Service Manager. Here you should see the contact node host and port.
    Make sure the Search Server is running. Also, import the searchcluster.pte file so that the Search Cluster Manager is visible in the utilities drop down.
    Kenan
    http://www.ppc.com

  • Book Module Error "Could not contact the Blurb Web Service"???

    I have successfully used Lightroom in the past to upload a book with no problems. I'm currently running the most updated version of Lightroom v 5.6. I've just finished a new book and am getting the error message "Could not contact the Blurb Web Service. Check your internet connection." My internet connection is fine, my firewalls and anti-virus are turned off, I've restarted both Lightroom and my computer. Same problem.
    My research has shown this is a very common problem, but all the forums I've found do not have answers on how to solve the problem. All the posts I've found about this problem are either unanswered or suggest things like turning off and turning back on "unchecking apply background globally" and other tips related to the background and text, or change the cover style back and forth, etc. None of these has worked for me.
    I am ordering this book as a wedding album for a client and it is URGENT that I get the order uploaded within the next few days or I'm going to have to refund the clients' payment and lose the job, which would be extremely professionally embarrassing. I'm VERY frustrated and have very eager customers waiting. PLEASE HELP ASAP!!!
    Janine Fugere
    As Seen by Janine
    www.asseenbyjanine.com

    I solved the Lightroom Book Module problem of "Could not contact Blurb Web Service. Please check your internet connection."
    With the help of Adobe Lightroom's telephone tech support, a very patient man named Himanshu helped me discover what was causing this issue, after researching the issue and calling me back. Nice touch Adobe! It was pleasant to be able to do other things while Himashu researched and consulted with other techs to find my solution.
    As very many other people have reported in user forums, the problem was not that I didn't have an Internet connection.
    The problem was caused by my PC's Windows 8 User Account Settings, which somehow had Internet Settings that conflict with the upload to Blurb from Lightroom. The Adobe Lightroom tech support person helped me create a new user account, and I am able to successfully upload to Blurb from Lightroom under the new account. We created a quick test book to try and it worked just fine under the new user account.
    Not sure how this solution would translate for a MAC user (I've read of people with Mac computers getting the same upload error) but I advise checking your User Account's Internet Settings, whatever type of computer you are using.
    The only minor glitch I still have is that my new Windows user account can't access any of my photo files (or any other files) from my old user account, even when I gave the new user account administrator access. I have a very large internal hard drive, so my photos & catalog are stored internally. The Lightroom tech support advised me to contact Lenovo (my computer manufacturer) for help to transfer all my files from my original user account to the new one I just created. I will do that very soon.
    Meanwhile, my temporary workaround was to export my Lightroom Catalog and the photos I needed for this book onto an external hard drive, so I could access them from the new user account. My wedding clients' book has been successfully uploaded to Blurb!
    I'm sharing so others with this problem uploading from Lightroom to Blurb may also find this solution works for them, too.

  • Could not contact the DSCC agent

    Hello,
    I'm having a little problem with my DSCC.
    As described here: http://docs.sun.com/app/docs/doc/820-2761/install-bits-zip?a=view
    I tried to install the dscc on a sun web application server.
    Everything went fine till i tried to install a directory server instance from the dscc web application.
    I got the following error:
    Could not contact the DSCC agent on <hostname>. Use the command cacaoadm to check that the DSCC agent is installed and running on port 11162.
    The agent is running:
    -bash-3.00$ ./cacaoadm status
    default instance is DISABLED at system startup.
    Current retries count : 0/4
    Processes:
    200
    Uptime: 0 day(s), 18:25
    and apparently the connections are established:
    -bash-3.00$ netstat -a | grep 11162
    ***.47776 ***.11162 49152 0 49152 0 CLOSE_WAIT
    ***.11162 ***.47776 49152 0 49152 0 FIN_WAIT_2
    ***.47791 ***.11162 49152 0 49152 0 CLOSE_WAIT
    ***.11162 ***.47791 49152 0 49152 0 FIN_WAIT_2
    *.11162 *.* 0 0 49152 0 LISTEN
    ***.47734 ***.11162 49152 0 49152 0 CLOSE_WAIT
    I tried to re-deploy the war several times and to restart the agent as well, but no sigar !
    Anyone got an idea what I'm doing wrong ?

    Couple of bugs (6710514 and 6710506) talk about a very similar problem, but no solution. Is any exception thrown for you, on the DSCC popup or in App Server's logs? Does the problem go away when you try it again? Do let us know.

  • Could Not Contact the Software Update Server

    I am trying to configure my clients so they can update releases of Jabber by clicking on "Check for Updates".  I am getting the error, "Could not contact the software update server."  I have verified the URL's in the XML files are correct and I can get to them directly from a browser.
    Anyone have any ideas of what I am doing incorrectly?
    jabber-config.xml
    <?xml version="1.0" encoding="utf-8"?>
    <config version="1.0">
    <Presence>
       <PresenceServerAddress>10.1.10.8</PresenceServerAddress>
       <PresenceServerDomain>app.leeent.net</PresenceServerDomain>
    </Presence>
    <Directory>
       <DirectoryServerType>EDI</DirectoryServerType>
       <ConnectionType>1</ConnectionType>
       <PrimaryServerName>10.1.4.42</PrimaryServerName>
       <ServerPort1>3268</ServerPort1>
       <SecondaryServerName>10.1.4.3</SecondaryServerName>
       <ServerPort2>3268</ServerPort2>
    </Directory>
    <Client>
        <UpdateUrl>http://leestl-oapp.stl.leeent.net/jabber/jabberupdate.xml</UpdateUrl>
    </Client>
    <Policies>
       <Disallowed_File_Transfer_Types>.exe;.msi;.rar;.zip;.mp3;.mp4</Disallowed_File_Transfer_Types>
    </Policies>
    <Options>
       <Start_Client_On_Start_OS>true</Start_Client_On_Start_OS>
    </Options>
    </config>
    jabberupdate.xml
    <?xml version="1.0" encoding="windows-1250"?>
    <JabberUpdate>
      <LatestBuildNum>3271</LatestBuildNum>
      <LatestVersion>9.2.2</LatestVersion>
      <Message><![CDATA[<b>This is Jabber 9.2.2</b>]]></Message>
      <DownloadURL>http://leestl-oapp.stl.leeent.net/jabber/CiscoJabberSetup-STL.msi</DownloadURL>
    </JabberUpdate>

    I figured out the problem.  It was the UTF encoding.  Should have stuck with UTF-8 but instead took what PSPAD gave me as a default.

  • "Reader could not contact the server to complete the request" error

    While trying to tranfer a document into pdf format I have suddenly received the above error - "Reader could not contact the server to complete the request"  I have already transfered three or four documents today, but now am suddenly receiving this error.  I have tried rebooting my server to check for issues on my end but it is fine.  Any suggestions?  Thanks.

    Hi there,
    Here are some suggestions you can try:
    a) Ensure your internet connection is available and try again.
    b) If you are using an older version of Reader, try installing the latest (Reader XI) and try again.
    c) Log into the web app (createpdf.acrobat.com) and click on Convert to PDF on the right hand pane and try converting to PDF from there.
    Laura.

  • Error while trying to upgrade my iPhone, message reads "iTunes could not contact the iPhone software update server beecause your are not connected to the internet.

    Hello,
    I am trying to upgrade my iOS to version 5 but receive the message noted below ("iTunes could not contact the iPhone software update server because you are not connected to the internet"). I click update on iTunes.  My internet works fine.  Does anyone know what may be causing this error?

    Try disabling firewall and virus scanning software

  • Error executing search on Plumtree Corporate Portal : Could not contact the Search Server.

    Hi
    I have intsalled the plumtree portal.... The links are working. But when i search any word then it gives following error messages
    "Error executing search on Plumtree Corporate Portal : Could not contact the Search Server."
    Please let me know what could be the solution to above problem
    Thanks

    Santosh,It appears that your portal server can not connect to the Search Server.1) Check to ensure that the "Plumtree Portal Search Server" NT Service is running. It will be an NT service. If you check the PlumtreePortal_v5-0.properties file you should see two entries for where you installed the Search service.SEARCH_SERVER_HOST=servernameSEARCH_SERVER_PORT=15244
    2) If the service is not started, then start it...
    3) You can test connectivity to the Search Server by telnetting to server in question at port 15244 (or whatever port you installed the search service on). If you get a response from Ignite, then the search server is up..
    Phil Orion | [email protected] | www.orionsmith.com

  • ITunes could not contact the iPod software update server

    I am a teacher managing many iPod touches.
    I am trying to update the ipod software to version 3.1.3 but using my macbook (10.5.8) I cannot reach the update server and a I get the following error - "iTunes could not contact the iPod software update server". I am connected to the internet, I can access the iTunes store no problem.
    Using my windows XP laptop I can access the update server and I am using the same network ID and the same proxy settings.
    Any ideas?

    Forget the wireless modem part of the question. I tried plugging directly into my pc and still have the same problem...very frustrating!

  • "itunes could not contact the ipod software update server because you are not connected to the internet" Help?

    Hello all, new to the forums.
    I've been recieving the error message "itunes could not contact the ipod software update server because you are not connected to the internet". This problem didn't occur at all for the past 2 years of using itunes.
    I've already scanned through numerous websites and forums for help, but none of them worked.
    This  set of instructions resulted in no change to any of the problems, though iTunes lists that as the supposed solution.
    # Open Internet Options from control panel.
    # Click the Connections tab.
    # Click the LAN Settings button.
    # Select the Automatically detect settings checkbox.
    Others include installing IE7, which that didn't work either.
    Can anyone help?

    Here it is:
    Microsoft Windows 7 x64 Ultimate Edition (Build 7600)
    LENOVO 2537FC4
    iTunes 10.3.1.55
    QuickTime 7.6.9
    FairPlay 1.11.17
    Apple Application Support 1.5.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.1.2
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 2.0.5.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number 003DB3100363E3C0
    Current user is not an administrator.
    The current local date and time is 2011-06-16 17:03:57.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA NVS 3100M
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.3.1.55 (x64) is currently running.
    iTunesHelper 10.3.1.55 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {505BB17D-FA14-4FA0-9D77-F7998FEBB435}
    Description:          Intel(R) Centrino(R) Advanced-N 6200 AGN
    IP Address:          192.168.0.3
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.0.1
    DHCP Enabled:          Yes
    DHCP Server:          192.168.0.1
    Lease Obtained:          Thu Jun 16 16:54:56 2011
    Lease Expires:          Fri Jun 17 16:54:56 2011
    DNS Servers:          192.168.0.1
                        68.94.156.1
    Adapter Name:          {610821DE-0532-4C65-839B-B74B65859FBA}
    Description:          Intel(R) 82577LM Gigabit Network Connection
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 16:00:00 1969
    Lease Expires:          Wed Dec 31 16:00:00 1969
    DNS Servers:
    Adapter Name:          {10983C8A-FCDA-4B2F-8A89-E1596BA6B7BA}
    Description:          Bluetooth Device (Personal Area Network)
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 16:00:00 1969
    Lease Expires:          Wed Dec 31 16:00:00 1969
    DNS Servers:
    Active Connection:          Broadband Connection
    Connected:          No
    Online:                    No
    Using Modem:          Yes
    Using LAN:          No
    Using Proxy:          No
    SSL 3.0 Support:          Enabled
    TLS 1.0 Support:          Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-06-16 15:35:33.

  • Could not contact the DSCC agent on ldap-dj (my testing host)

    Hi,
    I have installed dsee7 "Oracle Directory Serivce Control"
    When I am attempting to register a server. I receive the following error message
    Additionally having problems to enable cacaoadm.... any recommendations?
    Your help is greatly appreciated.
    Thanks.
    D.J.
    "Could not contact the DSCC agent on ldap-dj. Use the cacaoadm to check that the DSCC agent is installed and running on port 11162
    [oracle@ldap-dj bin]$ dsccsetup status
    DSCC Agent is registered in Cacao
    Cacao is down. Start it using:
            /u01/dsee7/ext/cacao_2/cacao2/bin/cacaoadm start
    Cacao uses a custom port number (21162)
    DSCC Registry has been created
    Path of DSCC registry is /u01/dsee7/var/dcc/ads
    Port of DSCC registry is 3998
    [oracle@ldap-dj bin]$
    [oracle@ldap-dj bin]$ id
    uid=501(oracle) gid=502(oinstall) groups=502(oinstall),503(dba),504(oper),505(asmadmin)
    [oracle@ldap-dj bin]$
    [oracle@ldap-dj bin]$ dsccreg list-servers -h 3998
    Enter DSCC administrator's password:
    Failed to connect to ldap://3998:3998
    3998:3998
    [oracle@ldap-dj bin]$ dsccreg add-server -h localhost -p 3998 /u01/dsee7/var/local/dsInst/
    Enter DSCC administrator's password:
    /u01/dsee7/var/local/dsInst/ is an instance of DS
    Enter password of "cn=Directory Manager" for /u01/dsee7/var/local/dsInst/:
    This operation will restart /u01/dsee7/var/local/dsInst/.
    Do you want to continue ? (y/n) y
    Connecting to /u01/dsee7/var/local/dsInst (using ldap://127.0.0.1:1389)
    Enabling DSCC access to /u01/dsee7/var/local/dsInst
    Restarting /u01/dsee7/var/local/dsInst
    Registering /u01/dsee7/var/local/dsInst in DSCC on localhost.
    [oracle@ldap-dj bin]$ dsccreg list-servers -h 3998
    Enter DSCC administrator's password:
    Failed to connect to ldap://3998:3998
    3998:3998
    [oracle@ldap-dj bin]$
    [oracle@ldap-dj bin]$
    [oracle@ldap-dj bin]$ cacaoadm status
    default instance is DISABLED at system startup.
    default instance is not running.
    [oracle@ldap-dj bin]$
    [oracle@ldap-dj bin]$ cacaoadm enable
    This action cannot be performed by a non privileged user.
    [oracle@ldap-dj bin]$
    [oracle@ldap-dj bin]$ cacaoadm start
    [oracle@ldap-dj bin]$ cacaoadm status
    default instance is DISABLED at system startup.
    Current retries count : 3/4
    Processes:
    16433
    Daemon is running but not available. Try again as it might be starting.
    [oracle@ldap-dj bin]$

    As you can see, the ODSEE cacao instance is running on custom port 21162, while the DSCC tries to contact it on port 11162... which is not available.
    also, the error you have here:
    [oracle@ldap-dj bin]$ dsccreg list-servers -h 3998
    Enter DSCC administrator's password:
    Failed to connect to ldap://3998:3998
    3998:3998
    [oracle@ldap-dj bin]$
    is pretty trivial: you're trying to connect to a host (-h parameter) called 3998 ... which I guess is not correct; try -h ldap-dj instead

  • Error: Could not contact spell checker

    Whenever I open Keynote or any iWork application, or even text edit for that matter, I get the following error: "Could not contact spell checker."
    I have looked around on other forums and I'm not the only one to have had this problem, but no working solution has been provided, as far as I can tell.
    I have not installed any third-party spellcheck software such as Spell Catcher or CocoSpell. I checked my international settings anyways, and there is no evidence that such programs exist on this computer. Nor do they show up in spotlight. There is no "services" directory in my library.
    I tried replacing the "en" file under the "spelling" directory with one from a leopard machine, but no use. (So I put the old one back.)
    I can't seem to figure this out. It is a system-wide error that happens with every application that uses spell checker.
    Any advice would be really appreciated!

    Try making a new user account and see if you are still having problems with spell checker with that user account. You may also want to try posting in the [MacOS 10.4|http://discussions.apple.com/category.jspa?categoryID=177] area as it sounds to me like it is more of a system problem then Keynote specific.

  • 'itunes could not contact the ipod software...' On Mac!

    Hi there!
    When I try to restore my new 5th Gen 30G iPod using iTunes, I get an error message saying 'itunes could not contact the ipod software update server because you are not connected ot the Internet'. But I can use the iTunes Store, and various other on-line applications.
    There is an article on the Apple site about this problem for Windows, but there's no Mac-based solution. I'm having to restore my iPod thanks to everyone's favourite error message, (-48). Any help much appreciated!

    I am having the same problem on my mac - is there anyone out there than can help us on this issue?

  • Getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

    getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

    Without knowing anything about your system, your image file, your working document and so on nobody can even begin to guess. The file could be damaged, there could be color management issues at play and what have you...
    Mylenium

  • Could not access the central system - CUA problem

    Hi all,
    Please help me with this problem.
    Its just a test scenario, when everything will be good here, i have to do the same for Production.
    We just did upgrade our R3 system from 4.6 to ECC6.0.
    I created CUA on DB1100 ( Dev BW 4.6 ) with two child systems 1) DC1150 ( Dev CRM 4.6)
    2) DE1400 ( DEV ECC 6.0 ).
    Now everything is working fine between DB1100 and DC1150..
    It works like CUA ( DB1100) and child (DC1150) systems as it should be.
    But connection between DB1100 and DE1400 is not working fine. When you go to SU01 in DE1400, it does not allow me to change anything. It means connection is there and DB1100 is taking DE1400 as child system but when i am updating any user information or roles in DB1100 it is not updating child system DE1400.
    And when i went to tcode SCUA in DE1400 it gave me this error.
    "Could not access the central system DB1100".
    I dont know whats happening. I did same config in DE1400 as i did in DC1150. DC1150 is working fine but not DE1400. 
    The most weird thing is that DB1100 is thinking DE1400 as child system and i can not make any changes to DE1400 directly.
    please help me with this. What i can do to make this working between DB1100 and DE1400??
    i need to do the same in production if it gets passed.
    Thanks in Advance.

    Hi mala_swa,
    seems that you have a problem with the rfc-connections....
    Please check in both directions. The connection have to work without problems.
    Check SCUL in DB1100 - what is the status of the distributed users? Errors, unconfirmed?
    Check idocs in DE1400. Are there some? What is their status?
    The most common error is coming from not working rfc-connections. That brings for instance problems while generationg partner profiles, etc. Also the strict naming convention (log. system name=system name in CUA landscape = name of used RFC-connections) has to be considered....
    So that are some points, that you could check.
    good luck,
    Bernhard

Maybe you are looking for