Proxy Error ( The ISA Server denied the specified Uniform Resource Locator

Dear All,
   I am getting one error in ABAP proxy configuration,
  following is the error.
~response_line     HTTP/1.1 502 Proxy Error ( The ISA Server denied the specified Uniform Resource Locator (URL).  )
~server_protocol     HTTP/1.1
~status_code     502
~status_reason     Proxy Error ( The ISA Server denied the specified Uniform Resource Locator (URL).  )
via     1.1 BLRSPRX10001
connection     close
proxy-connection     close
pragma     no-cache
cache-control     no-cache
content-type     text/html
content-length     4070
    suddenly one day this error occured.  proxy configuration was working earlier fine. SLDCHECK also working without any problem now also. but in SPROXY it is saying no connection to ESR. only local objects.
Please help me.
Regards
Pradeep P N

Hi Pradeep,
What is this BLRSPRX10001?
IF it is rfc destination, then check the user.
This problem is related to user rights. The user used there might not have sufficient authorizations to invoke the proxy. (may be the authorization is expired)
Regards
Suraj

Similar Messages

  • Exchange 2010 OWA : TMG Error 12302 The server denied the specified Uniform Resource Locator (URL).

    Hello All,
    We are using TMG2010 (SP2, rollup4) for publishing Exchange 2010 OWA sites. The issue is that after every 10-24 hrs , the TMG server stops logging in OWA sites and start giving below error. Then we have to restart the server one two times or the problem
    solves by itself.
    I have also install a new server and it is also giving same behavior.  On TMG server the exchange edge server and Forefront Protection for exchange is also installed.
    Please help to solve this issue.
    Denied Connection
    -TMG05 5/21/2014 11:44:39 PM
    Log type:
    Web Proxy (Reverse)
    Status: 12302 The server denied the specified Uniform Resource Locator (URL). Contact the server administrator.
    Rule:
    PRC-OWA
    Source:
    119.157.175.238:56971
    Destination:
    111.68.105.121:443
    Request:
    GET http://mail.parc.gov.pk/owa
    Filter information:
    Req ID: 0e947d98; Compression: client=Yes, server=No, compress rate=0% decompress rate=0% ; FBA cookie: exists=yes, valid=yes, updated=no, logged off=no, client type=public, user activity=yes
    Protocol:
    https
    User:
    anonymous
    Additional information
    Client agent: Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.2; WOW64; Trident/6.0)
    Object source: (No source information is available.)
    Cache info: 0x0
    Processing time: 125 MIME type:

    Hi,
    A similar thread:
    http://social.technet.microsoft.com/Forums/forefront/en-US/e8fdc1bd-f023-4804-ad02-67899d8c7347/the-server-denied-the-specified-uniform-resource-locator-errors12302-ashttp-error-code-of-500?forum=Forefrontedgegeneral
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Just trying out my new mac but email won't load, error says "The mail server denied access to the account because an administrator or other mail client was using it when Mail tried to log in. Try again later." A little lock is beside the email inbox

    Just trying out my new mac but email won't load, error says "The mail server denied access to the account because an administrator or other mail client was using it when Mail tried to log in. Try again later." A little lock is beside the email inbox account, no password prompted and account is online and enabled... Thoughts?

    Have you tried clicking on the lock to see it it will then ask for a passwored.  Otherwise, try reblooting.

  • An error occurred at the server : Your request was cancelled due to an internal error on the Page Server. The object you are try

    hi i am getting this error.
    An error occurred at the server : Your request was cancelled due to an internal error on the Page Server. The object you are trying to view does not have the required property 'SI_FILES'. Please contact your system administrator
    please do the nedful.

    yeah Ted Ueda,
    what you are saying is correct. i am getting this output for
      report.getProgID() is CrystalEnterprise.Report.
    can you elaborate this. i am new to this. and also please let me know how to start and if u have any materials on this please forward to [email protected] and [email protected]
    please let me know which is best book for beginers.
    Thanks & Regards,
    Purushotham Podaralla

  • Testing an ISA Server Rule, the recursive query to other DNS Servers test fails

    Hello,
    I am trying to configure the following infrastructure with ISA Server 2006 and two W2003 servers (called "Server1" and "Server2") . "Server1" is a domain controller, and in
    "Server2" is the ISA Server installed, which also has
    attached two network Ethernet cards, one called "Internal Ethernet Card", and the other one called
    "External Ethernet Card".
    The infrastructure would be:  "Internal Ethernet Card"---- ISA Server ----"External Ethernet Card"---"Router"----"Internet"
    "Internal Ethernet Card" manages the internal package traffic of the infrastructure, the network segment which belongs is isolated from what we could called the Outbound traffic, which is linked to a router. "Internal Ethernet Card" it`s
    a virtual network.
    "Internal Ethernet Card" feature configuration is the following:
    - IP address: 192.168.3.3
    - Subnet Mask: 255.255.255.0
    - DHCP Enabled: No
    - DNS Server: 192.168.3.1 (Must point to the DC "Server1" which has the DNS Service installed)
    - Default Gateway:  None  (because doesnt point to outside)
    - Primary WINS Server: 192.168.3.1  
    The "External Ethernet Card" provides, the outbound connection, and this card is connected to the physical router.
    It`s feature configuration is the following:
    - IP address: 192.168.1.50
    - Subnet Mask: 255.255.255.0
    - DHCP Enabled: No
    - Default Gateway: 192.168.1.1
    - DNS Servers: 192.168.3.1 (Must point to the DC "Server1" which has the DNS Service installed)
    After configuring the network cards, I create the following rule in the ISA Server to allow the traffic towards outside from the server and the clients which have joined to the domain:
    Action: Allow.  Protocol: DNS.  From:"Server2".  To : External.  Condition: All Users
    After applying the changes to update the configuration, I enter in the Dns Server of "Server1" and in the "Monitoring" tab, I run a "recursive query to other DNS Servers" but fails.
    Only works the "simple query against this DNS Server".
    I don`t know why fails, but I`m stucked on this issue, because in the "Server1" DNS Server, in the "domain forward IP address list", I have added two DNS addresses which work OK.
    I would appreciate some help to solve this issue.
    Thanks
    Regards 

    Hello Ms. Long, 
    Yes, you are right. In the Server1 is configured the DNS server, to use forwarders whose are set in the field "Selected domain`s forwarder IP address list", two DNS address numbers obtained from "Open DNS", which work well.
    There is no DNS Server linked to the External NIC.
    The Server1 belongs to a private network configured as "VMnet3", which it is set as follows:
    IP address: 192.168.3.1
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.3.3
    DNS Server: 192.168.3.1
    I have tried to test your suggested idea:
    > set d2
    > google.com
    Server:  srv-dcfs-01.dominio.local
    Address:  192.168.3.1
    SendRequest(), len 42
        HEADER:
            opcode = QUERY, id = 2, rcode = NOERROR
            header flags:  query, want recursion
            questions = 1,  answers = 0,  authority records = 0,  additional = 0
        QUESTIONS:
            google.com.dominio.local, type = A, class = IN
    Got answer (113 bytes):
        HEADER:
            opcode = QUERY, id = 2, rcode = NXDOMAIN
            header flags:  response, auth. answer, want recursion, recursion avail.
            questions = 1,  answers = 0,  authority records = 1,  additional = 0
        QUESTIONS:
            google.com.dominio.local, type = A, class = IN
        AUTHORITY RECORDS:
        ->  dominio.local
            type = SOA, class = IN, dlen = 46
            ttl = 3600 (1 hour)
            primary name server = srv-dcfs-01.dominio.local
            responsible mail addr = hostmaster
            serial  = 41
            refresh = 900 (15 mins)
            retry   = 600 (10 mins)
            expire  = 86400 (1 day)
            default TTL = 3600 (1 hour)
    SendRequest(), len 28
        HEADER:
            opcode = QUERY, id = 3, rcode = NOERROR
            header flags:  query, want recursion
            questions = 1,  answers = 0,  authority records = 0,  additional = 0
        QUESTIONS:
            google.com, type = A, class = IN
    DNS request timed out.
        timeout was 2 seconds.
    timeout (2 secs)
    SendRequest failed
    *** Request to srv-dcfs-01.dominio.local timed-out
    As you can see highlighted in bold, the problem remains in the "recursive query to other DNS Servers" check.
    Maybe is better to put the issue on the "Windows Server General Forum" , because the issue has not nothing in common with the ISA Server, dont you?
    Thanks
    Best regards

  • ABout hide your Ip from the ISA server

    Hi!!Guys,I working on a programm that will hide my identetification from the ISA sever.I have a responsebility of securing the ISA server but I believe JAVA can do a nice job.But now I want to hack it before I can protect it.

    Two points
    1) The forum is concerned Cryptography. I don't see a cryptographic element to your question.
    2) Why should the members of this forum believe that you are not a bad guy trying to 'hack' a system?

  • Android MS RDP - RPC Error: Your connection was denied because of a Resource Access Policy (TS_RAP). Please contact your server administrator. (2147965402).

    I love iTap Mobile.  Paid for the app.  Sorry to see them discontinue it, but now I know why.  Microsoft bought them out!  But even though free, I am getting an error: RPC Error: Your connection was denied because of a Resource Access
    Policy (TS_RAP). Please contact your server administrator. (2147965402).  I worked with iTap to fix this so I guess they sold Microsoft their older buggy code...  Microsoft, please fix!
    PS: This is the Android version.  Mac and iOS are both okay.
    EDIT:  After an update a few months ago, iOS is no longer working.  Not sure if the problem is related to the Android MSRDP issue.
    UPDATE - Relevant posts (need Android RDP software engineer to fix):
    Event Viewer Log when using Android client:
    The user
    "DOMAIN\testuser", on client computer "10.x.x.x", met connection authorization policy requirements and was therefore authorized to access the RD Gateway server. The following authentication method was used: "NTLM". (This
    is most likely for logging into RD Web - icons shows up).
    The
    user "DOMAIN\testuser", on client computer "10.x.x.x", did not meet resource authorization policy requirements and was therefore not authorized to resource"localhost".
    The following error occurred: "23002".  (This is after clicking on any
    of the icons).
    I
    think the Android MS RDP client is providing the incorrect resource.  It shouldn't be "localhost".
     It should be the RD Connection Broker's hostname, I believe.
    Here's what it should look like (connected using a Windows PC going
    through the RD Web portal via Internet Explorer):
    The user "DOMAIN\testuser", on client computer "10.x.x.x", met connection
    authorization policy requirements and was therefore authorized to access the RD Gateway server. The following authentication method was used: "NTLM".
    The user "DOMAIN\testuser", on client computer "10.x.x.x", met resource
    authorization policy requirements and was therefore authorized to connect to resource "rdsfarm.domain.com".
    The user "DOMAIN\testuser", on client computer "10.x.x.x", connected
    to resource "rdsfarm.domain.com".
    Stephan,
    Do you have any way to contact the software engineer who worked on the Android version of the RDP client?  Please
    have them read this thread.  They need to fix the hard coded "localhost" resource to be a variable (namely whatever the user put in for the server).
    This is why the MS RDP app is failing in situations where the FQDN for the RD Gateway and Connection Broker uses
    the same host name.
    Again, this is not a configuration problem on our end as it works as intended with the native Windows RDP client
    as well as the Mac and iOS version of the mobile RDP client (all based on iTap Mobile's RDP app).
    This is a problem specific to the Android RDP app.
    PS: No matter how hard I try, the WYSIWYG editor is not very WYSIWYG at all, and so everything here looks messed up even though it looked right when I posted it (it is deleting new blank lines I'm inserting to make it spaced out and easier to read). See
    below to read the post in context.

    Thanks for the bumps, everyone.  I haven't check this thread in a while because I basically gave up on Microsoft's ability to respond.  Unlike paid apps, there's no number to call or ticket to open when an app like this malfunctions.
    Just to give you an update, iOS users started having issues connecting a few months ago.  I don't remember what version started this.  I'm not sure if it's the same problem.
    Also, the newest version now gives a slightly different error message:  RpcOverHttpEndpointException: 2, Your connection was denied because of a Resource Access Policy (TS_RAP).  Please contact your server administrator.
    For Android users, I am starting to recommend Xtralogic Remote Desktop Client.  It's a paid app, but it works great.  I don't know of any alternative for iOS.
    MSRDP for Mac OSX (was also an iTap application) continues to work throughout the many updates.
    We need a software engineer from MS to read my first post.  All the information that will point to a fix is there.  I strongly believe someone hardcoded the string "localhost" instead of using a variable to point to the FQDN of the rdsfarm
    name.
    Here's that info again (copied/pasted).  It doesn't take an engineer to understand the issue.  If you know how to decipher Event Logs, you can see where the problem is.
    Event
    Viewer Log when using Android client:
    The
    user "DOMAIN\testuser", on client computer "10.x.x.x", met connection authorization policy requirements and was therefore authorized to access the RD Gateway server. The following authentication method was used: "NTLM". (This
    is most likely for logging into RD Web - icons shows up).
    The
    user "DOMAIN\testuser", on client computer "10.x.x.x", did not meet resource authorization policy requirements and was therefore not authorized to resource"localhost".
    The following error occurred: "23002".  (This
    is after clicking on any of the icons).
    I
    think the Android MS RDP client is providing the incorrect resource.  It shouldn't be "localhost".
     It should be the RD Connection Broker's hostname, I believe.
    Here's
    what it should look like (connected using a Windows PC going through the RD Web portal via Internet Explorer):
    The user "DOMAIN\testuser", on client computer "10.x.x.x",
    met connection authorization policy requirements and was therefore authorized to access the RD Gateway server. The following authentication method was used: "NTLM".
    The user "DOMAIN\testuser", on client computer "10.x.x.x",
    met resource authorization policy requirements and was therefore authorized to connect to resource "rdsfarm.domain.com".
    The user "DOMAIN\testuser", on client computer "10.x.x.x",
    connected to resource "rdsfarm.domain.com".

  • Work Folders Stopped Working - The sync server needs the user's current user name and password

    Our Work Folders deployment has just stopped working.
    Once the user has logged in to ADFS they get the following error message "The sync server needs the user's current user name and password (0x80c80300)"
    At the same time we see the following error in the file servers SyncShare event log:
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Microsoft-Windows-SyncShare" Guid="{9E6153AD-A829-4B70-B997-8E463A7A111C}" />
    <EventID>1013</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-12-03T14:48:32.922225100Z" />
    <EventRecordID>1178</EventRecordID>
    <Correlation />
    <Execution ProcessID="1988" ThreadID="2800" />
    <Channel>Microsoft-Windows-SyncShare/Operational</Channel>
    <Computer>fileserver.domain.com</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    - <EventData>
    <Data Name="User">eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiIsIng1dCI6ImVoZWxJMUFwWm9HT2VZdXU5NGZZb21tamUzayJ9.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.eCefzniju5qjqxIDdC2KCefkiNBNoGV-B1zg8EsnygUyV0LilPpANpv5uH75JJ9ekv9BN0vz7m6QezHEN4dYc5Z-6UJCzm7Wz6s1yNqVz-Sq5_wf_RrrHkxntcLXT2LHyyLN6ZxJy8uOF4vLw_fLsDzrNHkpaKUoevLAvNLI503IAiKDijKmQ0Qa2hZGsDT57yhKLGtjMXdqwx6FpFpP6vxA9qoUlR1E-tlt0ezTSD8j36djV9VbFpTlfeiH26D0n92T4exQCJkPdVzR42G7KbYyo9Acu0GGf7dnameWMQV9lT-Jtb7hH9xNReuVSVzqgtstsSDJR0mCsKJfLrdKVw</Data>
    <Data Name="Error">0X80C80021 - ECS_E_SYNC_ADFS_UNAUTHORIZED</Data>
    </EventData>
    </Event>
    I have attempted re creating the setup using several blog posts including:
    http://blogs.technet.com/b/filecab/archive/2014/03/03/deploying-work-folders-with-ad-fs-and-web-application-proxy-wap.aspx.  Including deleting all WAP rules, deleting and recreating the Relaying Party Trust and obtaining new certificates for the file
    server.
    ADFS and WAP are working correctly for our Office 365 federations and on-premise SharePoint, Exchange and other web applications
    If I turn ADFS authentication off on the Work Folders server I can successfully connect and setup work folders on a domain joined computer, however as soon as ADFS authentication is enabled I get the above error. 

    Hi,
    As you expressed, it should be an authentication issue. 
    I assume it will work by selecting Windows Authentication instead of ADFS in step shows in following picture. 
    The article also mentioned that the certificate is needed in following computers.
    The self-signed AD FS certificate will need to be exported and installed on the following machines in the test environment:
    Work Folders
    Web Application Proxy
    Domain joined Windows 8.1 client
    Non-domain joined Windows 8.1 client
    Thus I would like to confirm if certificate is also imported. 
    If you have any feedback on our support, please send to [email protected]

  • I am trying to have access tables of the Sql Server through the Oracle

    I am trying to have access tables of the Sql Server through the Oracle and this being occurred the error:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Generic Connectivity using ODBC][H006] The init parameter <HS_FDS_CONNECT_INFO> is not set.
    Please set it in init <orasid>.ora file.
    ORA-02063: preceding 2 lines from HSMSQL
    I created the ODBC with name HSMSQL.
    I made all the configurations in the archives
    tnsnames.ora:
    HSMSQL=
    (DESCRIPTION=
    (ADDRESS= (PROTOCOL = tcp)(HOST = wsus)(PORT = 1521))
    (CONNECT_DATA =
    (SID = HSMSQL)
    (HS = OK)
    listener.ora:
    (SID_DESC = (SID_NAME=HSMSQL)
    (ORACLE_HOME= C:\oracle\ora92)
    (PROGRAM =hsodbc)
    initHS_SID.ora:
    HS_FDS_CONNECT_INFO = HSMSQL
    HS_FDS_TRACE_LEVEL = OFF
    -- Create database link
    create database link HSMSQL.US.ORACLE.COM
    connect to TESTE identified by TESTE2
    using 'HSMSQL';
    But when I execute query the error occurs:
    Select * from TabTeste@HSMSQL
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Generic Connectivity using ODBC][H006] The init parameter <HS_FDS_CONNECT_INFO> is not set.
    Please set it in init <orasid>.ora file.
    ORA-02063: preceding 2 lines from HSMSQL
    Please they help me, thanks, Paulo.

    Hi,
    It seems that your configuration is Ok. By the way, the workaround for this error is:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [Transparent gateway for ODBC][H001] The environment variable <HS_FDS_CONNECT_INFO> is not set.
    * Set HS_FDS_CONNECT_INFO in the hs{sid}init.ora file to the data source name.
    Example: HS_FDS_CONNECT_INFO = <ODBC DataSource Name>
    * Make sure the hs{sid}init.ora file exists in the ORACLE_HOME/hs/admin directory and has the same name as the SID in the LISTENER.ORA.
    Example: If SID=hsodbc in the listener.ora file, then the hs{sid}init.ora file would be named ORACLE_HOME/hs/admin/inithsodbc.ora
    For more information see if this [url http://forums.oracle.com/forums/thread.jspa?forumID=61&threadID=576975]thread can help you.
    Cheers

  • The WSUS administration console was unable to connect to the WSUS Server via the remote API. (Server 2k8)

    I have installed a new server for WSUS on Server 2k8, This is a stand alone server on Internet No client system is connected on this server as I have to copy these updates to my LAN which never connects to internet. (Previously I was using server 2k3. for
    online & server 2008 on my LAN , now I have changed the server for Online)
    Wsus has finished the synchronization & downloaded updates of around 67GB & its downloading more updates. The server shows me some updates are waiting to approved. but when I click the link for those updates I get following error message.
    error code is as follows -
    The WSUS administration console was unable to connect to the WSUS Server via the remote API.
    Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
    System.Net.WebException -- The operation has timed out
    Source
    System.Web.Services
    Stack Trace:
       at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
       at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
       at Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse(WebRequest webRequest)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, Int32 publicationState)
       at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
       at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
       at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
       at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
       at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates(ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)
       at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows()
    I Have tried desabling the firewall,disabling the antivirus protection. Tried by changing the default rule Please Help.

    Hi Sagar,
    First, please check if the RAM is exhausted. When there is not enough RAM, this issue may occurs.
    Please try to run iisreset on the WSUS server, then try to reconnect.
    Also, please try to run the server cleanup wizard to remove the unused update.
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • [WebLogic 9.2] Please enable the DomainRuntimeMBean Server and the Edit MBean Server

    When trying to log-in into my Admin Console:
    A required MBean Server is disabled which prevents the proper operation of
    the Weblogic Administration Console.
    Please enable the DomainRuntimeMBean Server and the Edit MBean Server in
    this domain's configuration.
    I can't even log-in to the Console, how can I change the domain's
    configuration?
    Thanks in advance!
    Two errors logged to the console:
    Console encountered the following error java.rmi.ServerError: A error
    occurred the server; nested exception is:
    javax.xml.transform.TransformerFactoryConfigurationError: Provider
    org.apache.xalan.processor.TransformerFactoryImpl not found
    at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:220)
    at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
    at
    weblogic.management.remote.iiop.IIOPServerImpl_922_WLStub.newClient(Unknown
    Source)
    at
    javax.management.remote.rmi.RMIConnector.getConnection(RMIConnector.java:2239)
    at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:271)
    at
    javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
    at
    com.bea.console.utils.MBeanUtils.lookupMBeanServerConnection(MBeanUtils.java:2907)
    at
    com.bea.console.utils.MBeanUtils.getDomainRuntimeMBeanServerConnection(MBeanUtils.java:1594)
    at
    com.bea.console.utils.MBeanUtils.getDomainRuntimeServiceMBean(MBeanUtils.java:1670)
    at
    com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:156)
    at
    org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:224)
    at
    org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:554)
    at
    org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:851)
    at
    org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:630)
    at
    org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:157)
    at
    com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:241)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
    at
    com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:130)
    at
    org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1169)
    at
    com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:688)
    at
    com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:268)
    at
    com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107)
    at
    com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:288)
    at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:427)
    at
    com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:708)
    Console encountered the following error
    com.bea.console.exceptions.NoJMXServerException:
    Domain Runtime MBean Server is not enabled. You will need to enable it
    through the JMXMBean.
    at
    com.bea.console.utils.MBeanUtils.getDomainRuntimeServiceMBean(MBeanUtils.java:1677)
    at
    com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:156)
    at
    org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:224)
    at
    org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:554)
    at
    org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:851)
    at
    org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:630)
    at
    org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:157)
    at
    com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:241)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
    at
    com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:130)
    at
    org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1169)
    at
    com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:688)
    at
    com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:268)
    at
    com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107)
    at
    com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:288)
    at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:427)
    at
    com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:708)
    ...

    Nevermind this, found it myself:
    Some jar files the deployed & running application used, were needed in
    directory \bea\jdk150_10\jre\lib\ext

  • How to mirror between the production server and the multiple local servers.

    I am currently looking for the best way to correspond between our production server and the multiple local servers. Because the production server is the only server that holds the latest updating applications, and our local servers are located for each developer’s local machines where the all modifications and creations are done. So when the developer locally makes changes for assets or files, he creates a patch archive first, then accesses to the production side Administration console screen and imports them from Application Management screen.
    We tried to find a way to see the imported date before (so we know which one has been imported as new.), but there is no show in the Administration console Application Management screen. There is Creation date but it’s set as we initially imported the full archive files, but not patch files. Since between applications have some types of the dependencies (like fragments or image files), what is the best way to keep mirroring between the production server and local servers? Or we should simply not use patch file for updating server?
    Thanks,

    Check out this utility : http://blogs.adobe.com/livecycle/2013/03/adobe-livecycle-configuration-migration-utility.h tml
    Thanks,
    Wasil

  • HT201303 last time i bought apps by using visa gift card so iam trying to use the kind of visa gift card and the system is denying the method payment ....any idea how to solve this with my itune account ?

    last time i bought apps by using visa gift card so iam trying to use the kind of visa gift card and the system is denying the method payment ....any idea how to solve this with my itune account ?

    A few reasons I can think of, but instead of shooting in the dark, lets check with experts who can look at your account.
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • How can you change the banner of the FTP-server on the Linksys WRT610N ?

    Dear readers,
    My question is this : How can you change the banner of the FTP-server on the Linksys WRT610N ?
    At present it says : "Welcome to WRT610 Router's FTP service" which gives away the type of the device.
    Which is a clue I would rather hide. Besides that I would like to change it to something more personal.
    But how do you do that ?
    The UG is silent about this.
    Regards
    John

    Try this to change FTP banner?
    * Login as admin
    * Open Internet Information Services (IIS) Manager
    * Expand FTP sites (from tree view)
    * Right-click on the particular FTP site, select Properties
    * Click on the Messages tab
    * Setup new message
    * Save the changes

  • Can I run a different user as the managed server than the admin server?

    Under unix, can I run a Weblogic 7 managed instance as a different user than the
    admin server in the same domain? If not, any reference docs on BEAs site?

    You mean a different UNIX user? Yes, that should be fine.
    -- Rob
    Frank wrote:
    Under unix, can I run a Weblogic 7 managed instance as a different user than the
    admin server in the same domain? If not, any reference docs on BEAs site?

Maybe you are looking for