Proxy error when installing an imported application

The import of an application is successful. But the installation comes to a sudden end with a proxy error message: Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request POST /apex/wwv_flow.accept.
Reason: Error reading from remote server
POST /apex/wwv_flow.accept leads to an explanation in German:
Es wird erwartet, dass das p_company- oder wwv_flow_company-Cookie die Sicherheitsgruppen-ID des Anwendungseigentümers enthält.
Fehler ERR-7621 Bestimmen des Workspace für Anwendung (:) bei Anwendungsannahme nicht möglich.
I try to translate: it is expected that the p_company- oder wwv_flow_company-Cookie contains the securitygroup-ID from the application owner. ERR-7621: not possible to specify the workspace for application(:) when the application is received.
I really don't know what to do. Is there anybody who can help?
Thanks in advance
Michael
Edited by: user445720 on Jun 4, 2009 9:34 PM
Edited by: user445720 on Jun 4, 2009 9:37 PM

Nobody has a suggestion, not even the Oracle specialists? Yes, so far that is the case.
May this be the wrong forum for my question?Focus on the proxy error. I've never seen that and I don't know what it means. Have you contacted Oracle Support?
Scott

Similar Messages

Error when installing applications

I am getting a error when installing a few different application.
I get this error installing the Citrix Receiver, I get similar errors when installing the Cisco VPN software as well. These are two very important aps for us and need to work on 8.1 if we are to move forward with upgrades.
Product: Citrix Receiver(USB) -- Error 1406. Could not write value GUID to key \SYSTEM\CurrentControlSet\Control\Citrix\Tracing\Modules\IcaClient_GenericUsb_Vdgusb. System error . Verify that you have sufficient access to that key, or contact your support
personnel.
It seams like it is not creating the key in the registry, even though I am a local admin on the system. I have tried running it as a domain admin with the same error. I have also verified I can create keys in the registry
I am currently running Windows 8.1 Enterprise eval on my laptop, we are testing this in our environment.
Thanks in advanced for any help, this one has stumped me a little.

Ask Cisco support/forum for help. This seems to be vendor/product specific
https://supportforums.cisco.com/discussion/12191531/cisco-vpn-client-wont-install-error-1406
http://community.spiceworks.com/topic/492304-cisco-vpn-client-installtion-error-code-1406
http://vootwerk.wordpress.com/2008/06/05/fix-error-1406-during-cisco-vpn-client-installation-or-upgrade/
HTH
Milos

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Oracle Application Server for SLES Linux error when install

I try install Oracle Application Server Infrastructure (as_linux_x86_portal_wireless_101202) on SLES:
1. I install orarun package.
2. Install patch 3167528 - remove entries from the "/etc/services"
error when install - the OPMN process manager failed to start.
I read opmn/logs: can't load shared library libdb.so.2...
I check /usr/bin/libdb.so and found libdb-4.3.so
I create simbolik link libdb.so.2 to libdb-4.3.so and retry install oracle Application Server Infrastructure, but have this error again.
I try install Oracle Application Server Infrastructure on several linux distribs, but have this error again adn again..
how I can fix this error? help mee pls..

I think that you need to download a patch for that error, this patch is just a library that you need create a link to it.
Follow this Metalink Note 790943.1
Greetings

Get_Block Error when installing an application

Hi all,
I tried to recover a backup I had made some days ago, and I got the following error when installing the application:
Error GET_BLOCK Error.
ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 34, column 68: PLS-00103: Encountered the symbol &quot;&amp;&quot; when expecting one of the following: ) , * &amp; = - + &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;= &lt;&gt; and or like like2 like4 likec between || multiset member submultiset <pre> &lt;br&gt;begin &lt;
I looked in the .sql application and searched for the "&quot;" or even for the symbols &" and I found nothing. I checked the character set and it seems right, the application is in UNICODE-UTF8 and the database is in UTF8 as well. I'm working with APEX version 4.1.1 and apex listener 1.1.
Has anyone got this error before, or does anyone have a tip on where to investigate?
Thanks in advance.
Elena.

For those who have gotten this error as well..
The problem was in the buttons Expand /Collapse that I had in some trees. I had them with a redirect url pointing to a javascript code like this:
javascript.apex.widget.tree.expand_all('id');I changed these buttons, I set an action "Defined by a Dynamic Action". This DA is called when the button is clicked and executes this javascript code:
apex.widget.tree.expand_all('id');Now it works. Hope it can help someone.
Elena.

Error number 207 error type SPECIFIC_CODE IMPORT ABAP phase error when install database instance

IMPORT ABAP phase error when install database instance
Error number 207 error type SPECIFIC_CODE.
In phase "Import ABAP" the installation halts with error. Can anyone please tell me what error should I search for and (possibly) what is the solution?
Thanks in advance
synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false)
syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false, ISyProgressObserver* )
synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="IboSap-PC\nspadm" does not exist.
Failed action: with parameters
Error number 207 error type SPECIFIC_CODE

It is not easy, really , it has taken many hours and at the End I got the problems,.
so I have decided to pay 20 $ every month, and I can get an access IDES to SAP, ERP, ABAP.
without any problem. In ABAP, I have only Sflight ,SBOOK etc. but MARA, and others tables, dont exist, .
I know, some students have not enough money, so what can we do? every one get problem with installaion and others after installaion, with server, 3 days work, and NSP becomes RED. Yellow, etc.
anyway. thank you for all.
Best Regards.

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Error when attempting to IMPORT object "TS_CHECK".

When using in BI SAP NetWeaver 2004s (700 - SP 15) the transaction ST04old -> Detail analysis menu -> Summary report
The following short dump occurs:
Runtime Errors         CONNE_IMPORT_WRONG_COMP_TYPE
Except.                CX_SY_IMPORT_MISMATCH_ERROR
Date and Time          19.11.2008 15:14:08
Short text
Error when attempting to IMPORT object "TS_CHECK".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTD4" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "DB02_ORA_FILL_TS_CHECK__CRITOB" "(FUNCTION)", nor was it propagated
by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing the object "TS_CHECK", the component no. 4 in the
dataset has a different type from the corresponding component
of the target object in the program "SAPLSTD4".
The data type is "I" in the dataset, but "N" in the program.
Missing RAISING Clause in Interface
Program                                 SAPLSTD4
Include                                 LSTD4U03
Row                                     1
Module type                             (FUNCTION)
Module Name                             DB02_ORA_FILL_TS_CHECK__CRITOB
Trigger Location of Exception
Program                                 SAPLSTD4
Include                                 LSTD4U03
Row                                     51
Module type                             (FUNCTION)
Module Name                             DB02_ORA_FILL_TS_CHECK__CRITOB
Source Code Extract
Line
SourceCde
21
DATA: BEGIN OF TD110.
22
INCLUDE STRUCTURE TD110_STRU.
23
DATA: END OF TD110.
24
25
CURR_TIME = SY-UZEIT.
26
CURR_DATE = SY-DATUM.
27
28
CALL FUNCTION 'GET_DB_ORA_RELEASE'
29
IMPORTING
30
ORACLE_RELEASE = ORA_REL.
31
32
IF FLAG_REFRESH = 'y'. FLAG_REFRESH = 'Y'. ENDIF.
33
flag_refresh = 'Y': Es soll in jedem Fall auf die DB zugegriffen werd.
34
35
CLEAR TS_CHECK. REFRESH TS_CHECK.
36
CLEAR CRITOBJ. REFRESH CRITOBJ.
37
CLEAR NR_CRIT_OBJ.
38
39
IF FLAG_REFRESH <> 'Y'.
40
41
Suche zunächst im Arbeitsspeicher !
42
CLEAR TS_CHECK_CACHE. READ TABLE TS_CHECK_CACHE.
43
IF NOT ( TS_CHECK_CACHE IS INITIAL ) .
44
TS_CHECK[] = TS_CHECK_CACHE[].
45
CRITOBJ[] = CRITOBJ_CACHE[].
46
OK_1 = 'Y'.
47
48
Suche danach in 'MONI' !
49
ELSE.
50
PERFORM PREPARE_MONIKEY USING 2.
>>>>>
IMPORT TS_CHECK CRITOBJ FROM DATABASE MONI(DB) ID MONIKEY.
52
53
IF SY-SUBRC = 0.
54
OK_1 = 'Y'.
55
TS_CHECK_CACHE[] = TS_CHECK[].
56
CRITOBJ_CACHE[] = CRITOBJ[].
57
ENDIF.
58
ENDIF.
59
60
'Same procedure' für datetime:
61
IF NOT ( TD110_CACHE IS INITIAL ).
62
DATETIME-MONI_DATE = TD110_CACHE-DATUM.
63
DATETIME-MONI_TIME = TD110_CACHE-UZEIT.
64
ELSE.
65
PERFORM PREPARE_MONIKEY USING 3.
66
IMPORT TD110 FROM DATABASE MONI(DB) ID MONIKEY.
67
IF SY-SUBRC = 0.
68
DATETIME-MONI_DATE = TD110-DATUM.
69
DATETIME-MONI_TIME = TD110-UZEIT.
70
TD110_CACHE = TD110.
Only related SDN post is following, but solved by changing permissions for saposcol.
Only related SAP Note is SAP Note Number 597743 "DB02: Poor entries for critical objects list", but not applicable for current SAP version.
For me strange is that this issue occurs on the development system, but not on the acceptance and production system.
Thanks in advance for any assistance.
KR
Gidion

Received the solution from SAP Active Global Support:
This error occurs due a corruption in the table MONI.
For solving this issue you need to clean the records of this table via the following path :
1. Call transaction ST03
2. With GOTO -> Performance database -> Content of database
3. Push button Delete data group
4. Enter ID DB
5. Continue
6. Confirm the delete
If you wish to backup the data before deleting the entry please follow the steps in the note 1000275 "DB02: history data backup procedure".
Regards,
Gidion

Error when install Infrastructure 10g 10.1.2 in Windows2000 server

My environment:
RDBMS Version: 10.1.0.3.1
Operating System and Version: Windows2000 SP4
Product (i.e., OAS, IAS, etc): 10g AS Release 2
Product Version: 10.1.2
JDK Version: 1.4
I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
Subscriber Naming attribute: dc
Default Subscriber Name: server01
*** Resetting user DN and GUID information ...***
Done....
PL/SQL procedure successfully completed.
No errors.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
NLS_LANG character set = WE8MSWIN1252
NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
ERROR : Exception while configing SSO DAD :
oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
Please advice.
Thanks
Trung

I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
When you get the error, start OID using the command line then try running the config assistant again.
Hope this helps
Alex

Link error during install of O9i Application server

Hi there.
I have a problem when installing Oracle 9i Application Server rel. 1.0.2.2.0 on SuSE 7.3.
During installation phase "Linking Oracle 9i Application Server rel. 1.0.2.2.0", I get: "Error invoking target install of makefile /
opt/oracle/product/9.0.1/icache/lib/ins_icache.mk"
The make.log states:
building Oracle8i Cache Management Engine
gcc -o /opt/oracle/product/9.0.1/bin/wtcme -L/opt/oracle/product/9.0.1/icache/lib/ -L/opt/oracle/product/9.0.1/lib/ /opt/oracle/pro
duct/9.0.1/icache/lib/wtemain.o /opt/oracle/product/9.0.1/icache/lib/libicache.a /opt/oracle/product/9.0.1/lib/libwtc8.a /opt/oracle
/product/9.0.1/icache/lib/libxml8.a \
-lclntsh /opt/oracle/product/9.0.1/rdbms/lib/kpuadef.o `cat /opt/oracle/product/9.0.1/lib/ldflags` -lnsgr8 -lnzjs8 -ln8
-lnl8 -lnro8 `cat /opt/oracle/product/9.0.1/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneri
c8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /opt/oracle/product/9.0.1/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -ln
ro8 `cat /opt/oracle/product/9.0.1/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrac
e8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `ca
t /opt/oracle/product/9.0.1/lib/sysliblist` -ldl -lm \
-lpthread -lc
gcc: /opt/oracle/product/9.0.1/rdbms/lib/kpuadef.o: No such file or directory
make: *** [opt/oracle/product/9.0.1/bin/wtcme] Error 1
I had a similar problem when installing the database server software. This was fixed by editing the LD_SELF_CONTAINED parameter in
genclntsh. This, however, does not help in this case.
Kind regards,
Roald Andresen

Hi Melchor,
Please follow SAP Note 1618816 - Permanent or Temporary License Already Exists In Systemcopy
If possible please share files saplikey.log, dev_slic
Regards,
Gaurav

Getting an "installer failed to initialize" error when installing CS5 from CD

Getting an "installer failed to initialize" error when installing CS5 from CD
Mac OS X Version 10.7.5

Try using the Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS5:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Error when installing SM7 "The step runMigrationMonitor with step key "

Hi all
Please help for the following error when installing
ERROR 2009-06-13 00:27:13.515
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Regards
Kevin

Hi Uday
import.monitor.java.log
Loading of 'SASACONT1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 4, failed 0, total 29.
Import Monitor jobs: running 3, waiting 22, completed 4, failed 0, total 29.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 4, failed 1, total 29.
Loading of 'REPOSRC' import package: ERROR
Import Monitor jobs: running 1, waiting 22, completed 4, failed 2, total 29.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 0, waiting 22, completed 4, failed 3, total 29.
Import Monitor jobs: running 1, waiting 21, completed 4, failed 3, total 29.
Import Monitor jobs: running 2, waiting 20, completed 4, failed 3, total 29.
Import Monitor jobs: running 3, waiting 19, completed 4, failed 3, total 29.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 2, waiting 19, completed 4, failed 4, total 29.
Loading of 'SAPAPPL1' import package: ERROR
Import Monitor jobs: running 1, waiting 19, completed 4, failed 5, total 29.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 19, completed 4, failed 6, total 29.
Import Monitor jobs: running 1, waiting 18, completed 4, failed 6, total 29.
Import Monitor jobs: running 2, waiting 17, completed 4, failed 6, total 29.
Import Monitor jobs: running 3, waiting 16, completed 4, failed 6, total 29.
Loading of 'DD03L' import package: ERROR
Import Monitor jobs: running 2, waiting 16, completed 4, failed 7, total 29.
Loading of 'SAPSSRC' import package: ERROR
Import Monitor jobs: running 1, waiting 16, completed 4, failed 8, total 29.
Loading of 'STERM_TEXT' import package: ERROR
Import Monitor jobs: running 0, waiting 16, completed 4, failed 9, total 29.
Import Monitor jobs: running 1, waiting 15, completed 4, failed 9, total 29.
Import Monitor jobs: running 2, waiting 14, completed 4, failed 9, total 29.
Import Monitor jobs: running 3, waiting 13, completed 4, failed 9, total 29.
Loading of 'SEOSUBCODF' import package: ERROR
Import Monitor jobs: running 2, waiting 13, completed 4, failed 10, total 29.
Loading of 'E071K' import package: ERROR
Import Monitor jobs: running 1, waiting 13, completed 4, failed 11, total 29.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 13, completed 4, failed 12, total 29.
Import Monitor jobs: running 1, waiting 12, completed 4, failed 12, total 29.
Import Monitor jobs: running 2, waiting 11, completed 4, failed 12, total 29.
Import Monitor jobs: running 3, waiting 10, completed 4, failed 12, total 29.
Loading of 'ATAB' import package: ERROR
Import Monitor jobs: running 2, waiting 10, completed 4, failed 13, total 29.
Loading of 'SAPSPROT' import package: ERROR
Import Monitor jobs: running 1, waiting 10, completed 4, failed 14, total 29.
Loading of 'SAPSDOCU' import package: ERROR
Import Monitor jobs: running 0, waiting 10, completed 4, failed 15, total 29.
Import Monitor jobs: running 1, waiting 9, completed 4, failed 15, total 29.
Import Monitor jobs: running 2, waiting 8, completed 4, failed 15, total 29.
Import Monitor jobs: running 3, waiting 7, completed 4, failed 15, total 29.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 2, waiting 7, completed 4, failed 16, total 29.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 1, waiting 7, completed 4, failed 17, total 29.
Loading of 'SAPSLEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 7, completed 4, failed 18, total 29.
Import Monitor jobs: running 1, waiting 6, completed 4, failed 18, total 29.
Import Monitor jobs: running 2, waiting 5, completed 4, failed 18, total 29.
Import Monitor jobs: running 3, waiting 4, completed 4, failed 18, total 29.
Loading of 'SAPDDIM' import package: ERROR
Import Monitor jobs: running 2, waiting 4, completed 4, failed 19, total 29.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 1, waiting 4, completed 4, failed 20, total 29.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 4, completed 4, failed 21, total 29.
Import Monitor jobs: running 1, waiting 3, completed 4, failed 21, total 29.
Import Monitor jobs: running 2, waiting 2, completed 4, failed 21, total 29.
Import Monitor jobs: running 3, waiting 1, completed 4, failed 21, total 29.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 4, failed 22, total 29.
Loading of 'SAP0000' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 4, fail
ed 23, total 29.
Loading of 'SAPUSER' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 4, failed 24, total 29.
Edited by: Kevin Wong on Jun 18, 2009 11:23 AM
Edited by: Kevin Wong on Jun 18, 2009 11:24 AM

Error when installing app

I keep getting an error when installing some apps - unknown error (0xE8000013)
Anyone know what this is or why this is happening???
any help apreciated

leefilmer,
Have you tried the steps in article http://support.apple.com/kb/TS1702 ? Reporting the problem to the particular application developer may be helpful, since it seems to be occurring with some apps.
Oddly, the article I found documenting the error doesn't seem related to the issue you're experiencing: http://support.apple.com/kb/TS1266. Do you have a SIM PIN on your iPhone by chance?
Other than that, have you tried restoring your iPhone and setting it up as a new phone? More information can be found here: http://support.apple.com/kb/HT1414 .
Hope this helps,
Raleigh

Error when Installing Business Content BW 3.5

Hello Everyone,
When I "Drag n Drop" the infocube 0PS_C021, it shows following errors :
Object 0EMPLOYEE_EDUCATION (InfoSource,ISTD) could not be collected for object PA-PA-IO (Application,APCO)
Message no. RSO296
Diagnosis
You have collected objects in the BW Metadata Repository. Associated objects for the object PA-PA-IO of type Application,APCO have also been collected. Object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD was among these objects. This object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD, is not, however, available in the Metadata Repository.
Object '0EMPLOYEE_EDUCATION' (ISTD) of type 'InfoSource' is not available in version 'D'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '0EMPLOYEE_EDUCATION' (in transport request ISTD) of type 'InfoSource' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
Please help me to solve these problems.
Regards
Sanjiv

Hi Sanjiv,
Check the below thread:
Error when Installing Business Content BW 3.5
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fbabd936493ee7e10000000a1553f7/content.htm
Reg
Pra

Error when running the Webdynpro Application

Hi All,
I am getting the following error when testing the WDA Application. Please let me know what can I do to resolve the error. I appreciate the help. Thanks
The following error text was processed in the system DRD : Screen output without connection to user.
The error occurred on the application server DOWNEA023_DRD_06 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSTRD
Function: TRINT_POPUP_EDIT_CANCEL_SHOW of program SAPLSTRD
Form: RAISE_ERROR of program SAPLSTRD
Function: TRINT_OBJECTS_CHECK_AND_INSERT of program SAPLSTRD
Function: TR_OBJECTS_CHECK of program SAPLSTRD
Function: RH_HRPOBJECT_CORR_AT_SAVE of program SAPLRHWM
Form: UPDATE_PLOG of program SAPLRHAP
Function: RH_UPDATE_DATABASE of program SAPLRHAP
Form: UPDATE_DATABASE of program MP100100
Form: LEAVE_ACTUAL_DYNPRO of program MP100100
Thanks

I have the same problem.
I'm trying to open up excel (Bex Analyzer) using the following code:
call function 'RSAH_LAUNCH_EXCEL'
    exporting
      i_genuniid                 = '4AW30ILXE3NN5MQTO3SW0GUY0'
     i_workbookid               =
      i_hide_sapgui              = 'X'
    importing
      e_log_handle               = l_log_handle
    exceptions
      excel_wrong_version        = 1
      excel_viewer_not_installed = 2
      bexanalyzer_not_installed = 3
      others                     = 4.

Proxy error when installing an imported application

Similar Messages

Maybe you are looking for