Proxy files missing

Hi,
I have a vierd case of missing media. The thing is that I have not changed anything, not deleted anything and not moved anything and most of the projects have not been worked on in a while.
I started fcpx up and all of a sudden many of my projects have missing media, as it seems it is proxy files that it is asking for. I can easilly find the original media inside the project folder and when I ask for it to relink to the original files, it annonces that all the files have been matched but when I hit Relink, nothing happens and everything stays the same.
Has anybody incounterd a simmular case?
running fcpX 10.0.3

Wow.. I accidently found the solution fiew seconds after this was posted. Somehow my prefs had been tempered with and the playback was set to proxies instead of optimized media.

Similar Messages

Changed date and time and lost reference to proxy files

I had a batch of transcoded proxy files (from a Canon 550d) that had the wrong time on them. I used "Modify > Adjust content created date and time" to shift them by an hour. FCP now reports "Missing Proxy" for all of them. I've checked in the events folder and all the proxy files are still there, it just seems FCP has lost its reference to them.
I can re-transcode them but of course that takes a long time. Two questions: anyone any idea why this happened and is there a way to re-link FCP with the existing files?
Curiously I adjusted the time on some files that had been transcoded from a AVCHD source and these are still OK!
(Using V 10.0.5 on a 2011 MBA with LaCie Thunderbolt disc)

In the end I re-transcoded the files but I think this article may have been the answer:
http://www.larryjordan.biz/fcpx-relinking/

Error generating Client Proxy - object missing in WSDL

Hello,
I have error while generating Client Proxy.
I have WSDL and XSD in files. I get error message:
object <message name="requestUPOMessage"> missing in WSDL
Diagnosis
In the WSDL document, the object
   "<portType name="GateServicePortType"> <operatio..."
from the namespace
"https://bramka.edeklaracje. mf.gov.pl/"
links to the object
   "<message name="requestUPOMessage">"
from the namespace
   "https://bramka.e-deklaracje.mf.gov.pl/"
However, this last object does not exist in the WSDL document.
WSDL FILE and XSD FILE: http://www.sendspace.com/filegroup/N8kSxPp5bhY2nVfcNBbAXg
WSDL:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:ns="https://bramka.edeklaracje.
mf.gov.pl/xsd" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:gate="https://bramka.e-deklaracje.mf.gov.pl/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" targetNamespace="https://bramka.edeklaracje.
mf.gov.pl/">
<wsdl:types>
<xs:schema attributeFormDefault="qualified" elementFormDefault="qualified"
targetNamespace="https://bramka.e-deklaracje.mf.gov.pl/xsd"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:include schemaLocation="GateService.xsd"/>
</xs:schema>
</wsdl:types>
<wsdl:message name="sendDocumentWithAttachmentResponseMessage">
<wsdl:part name="part1" element="ns:sendDocumentWithAttachmentResponse">
</wsdl:part>
</wsdl:message>
<wsdl:message name="sendUnsignDocumentResponseMessage">
<wsdl:part name="part1" element="ns:sendUnsignDocumentResponse">
</wsdl:part>
</wsdl:message>
<wsdl:message name="requestUPOResponseMessage">
<wsdl:part name="part1" element="ns:requestUPOResponse">
</wsdl:part>
</wsdl:message>
<wsdl:message name="sendDocumentResponseMessage">
<wsdl:part name="part1" element="ns:sendDocumentResponse">
</wsdl:part>
</wsdl:message>
<wsdl:message name="sendUnsignDocumentMessage">
<wsdl:part name="part1" element="ns:sendUnsignDocument">
</wsdl:part>
</wsdl:message>
<wsdl:message name="sendDocumentMessage">
<wsdl:part name="part1" element="ns:sendDocument">
</wsdl:part>
</wsdl:message>
<wsdl:message name="requestUPOMessage">
<wsdl:part name="part1" element="ns:requestUPO">
</wsdl:part>
</wsdl:message>
<wsdl:message name="sendDocumentWithAttachmentMessage">
<wsdl:part name="part1" element="ns:sendDocumentWithAttachment">
</wsdl:part>
</wsdl:message>
<wsdl:portType name="GateServicePortType">
<wsdl:operation name="sendDocument">
<wsdl:input message="gate:sendDocumentMessage">
</wsdl:input>
<wsdl:output message="gate:sendDocumentResponseMessage">
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="sendUnsignDocument">
<wsdl:input message="gate:sendUnsignDocumentMessage">
</wsdl:input>
<wsdl:output message="gate:sendUnsignDocumentResponseMessage">
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="sendDocumentWithAttachment">
<wsdl:input message="gate:sendDocumentWithAttachmentMessage">
</wsdl:input>
<wsdl:output message="gate:sendDocumentWithAttachmentResponseMessage">
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="requestUPO">
<wsdl:input message="gate:requestUPOMessage">
</wsdl:input>
<wsdl:output message="gate:requestUPOResponseMessage">
</wsdl:output>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="GateServiceSOAP12Binding" type="gate:GateServicePortType">
<soap12:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="sendDocument">
<soap12:operation soapAction="urn:sendDocument" style="document"/>
<wsdl:input>
<soap12:body use="literal" namespace="https://bramka.e-deklaracje.mf.gov.pl/"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal" namespace="https://bramka.e-deklaracje.mf.gov.pl/"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="sendUnsignDocument">
<soap12:operation soapAction="urn:sendUnsignDocument" style="document"/>
<wsdl:input>
<soap12:body use="literal" namespace="https://bramka.e-deklaracje.mf.gov.pl/"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal" namespace="https://bramka.e-deklaracje.mf.gov.pl/"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="sendDocumentWithAttachment">
<soap12:operation soapAction="urn:sendDocumentWithAttachment" style="document"/>
<wsdl:input>
<soap12:body use="literal" namespace="https://bramka.e-deklaracje.mf.gov.pl/"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal" namespace="https://bramka.e-deklaracje.mf.gov.pl/"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="requestUPO">
<soap12:operation soapAction="urn:requestUPO" style="document"/>
<wsdl:input>
<soap12:body use="literal" namespace="https://bramka.e-deklaracje.mf.gov.pl/"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal" namespace="https://bramka.e-deklaracje.mf.gov.pl/"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:binding name="GateServiceSOAP11Binding" type="gate:GateServicePortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="sendDocument">
<soap:operation soapAction="urn:sendDocument" style="document"/>
<wsdl:input>
<soap:body use="literal" namespace="https://bramka.e-deklaracje.mf.gov.pl/"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal" namespace="https://bramka.e-deklaracje.mf.gov.pl/"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="sendUnsignDocument">
<soap:operation soapAction="urn:sendUnsignDocument" style="document"/>
<wsdl:input>
<soap:body use="literal" namespace="https://bramka.e-deklaracje.mf.gov.pl/"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal" namespace="https://bramka.e-deklaracje.mf.gov.pl/"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="sendDocumentWithAttachment">
<soap:operation soapAction="urn:sendDocumentWithAttachment" style="document"/>
<wsdl:input>
<soap:body use="literal" namespace="https://bramka.e-deklaracje.mf.gov.pl/"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal" namespace="https://bramka.e-deklaracje.mf.gov.pl/"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="requestUPO">
<soap:operation soapAction="urn:requestUPO" style="document"/>
<wsdl:input>
<soap:body use="literal" namespace="https://bramka.e-deklaracje.mf.gov.pl/"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal" namespace="https://bramka.e-deklaracje.mf.gov.pl/"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="GateService">
<wsdl:port name="GateServiceSOAP12port" binding="gate:GateServiceSOAP12Binding">
<soap12:address location="https://test-bramka.edeklaracje.gov.pl/uslugi/dokumenty/"/>
</wsdl:port>
<wsdl:port name="GateServiceSOAP11port" binding="gate:GateServiceSOAP11Binding">
<soap:address location="https://test-bramka.edeklaracje.gov.pl/uslugi/dokumenty/"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
XSD
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="https://bramka.edeklaracje.
mf.gov.pl/xsd" targetNamespace="https://bramka.e-deklaracje.mf.gov.pl/xsd"
elementFormDefault="qualified" attributeFormDefault="qualified">
<xs:element name="sendDocument">
<xs:complexType>
<xs:sequence>
<xs:element name="document" type="xs:base64Binary"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="sendDocumentResponse">
<xs:complexType>
<xs:sequence>
<xs:element name="refId" type="xs:string" minOccurs="0"/>
<xs:element name="status" type="xs:int"/>
<xs:element name="statusOpis" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="sendUnsignDocument">
<xs:complexType>
<xs:sequence>
<xs:element name="document" type="xs:base64Binary"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="sendUnsignDocumentResponse">
<xs:complexType>
<xs:sequence>
<xs:element name="refId" type="xs:string" minOccurs="0"/>
<xs:element name="status" type="xs:int"/>
<xs:element name="statusOpis" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="sendDocumentWithAttachment">
<xs:complexType>
<xs:sequence>
<xs:element name="attachment" type="xs:base64Binary" minOccurs="0"/>
<xs:element name="document" type="xs:base64Binary"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="sendDocumentWithAttachmentResponse">
<xs:complexType>
<xs:sequence>
<xs:element name="refId" type="xs:string" minOccurs="0"/>
<xs:element name="status" type="xs:int"/>
<xs:element name="statusOpis" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="requestUPO">
<xs:complexType>
<xs:sequence>
<xs:element name="refId" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="requestUPOResponse">
<xs:complexType>
<xs:sequence>
<xs:element name="upo" type="xs:string" minOccurs="0"/>
<xs:element name="status" type="xs:int"/>
<xs:element name="statusOpis" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
Maybe someone know what is wrong in wsdl file and how to correct this?

Hi Marcus,
Did you fix the problem?
I'm asking because I'm dealing with the same problem! I tried to generate a Proxy object from a WSDL document and I can't... I always receive the error "Cannot generate proxy (object missing in WSDL, see long text)". I have checked on the service.sap.com and I found a xls document with all unsupported WSDL elements and one of them is the "part name=" and I have it in my WSDL! I don't know how to workaround this issue, can you help me please?
Thanks in advance,
Ricardo.

Proxy files from .MXF

Hello everyone,
I was wondering if someone could help me with this issue:
I will be editing some footage taken by a camera operator who will send me proxy files over the internet. He will be capturing .MXF with a Canon XF-100. Two good thing about it: 4:2:2 color and 2 audio tracks.
Now, I'd like to get both in my Proxy files, because I will need both to color correct a bit and to adjust audio levels (1 channel will have an ext mike and the other the built in mike). I was thinking about converting with Media Encoder to Apple ProRes 422 Proxy, which will give me the 4:2:2 color, but not the 2 audio channels. I looked for anything which could get me what I wanted but without luck.
Can anyone suggest me a way to do that? I will be editing in Premiere 5.5
Many Thanks

> 20 GB over the internet will take days, or am i missing something
Unless your Internet connection is very slow, that is an exaggeration. Hours, yes; days, no. Especially if you zip the files up and use a decent FTP system.
There are a lot of reasons to work from the original media---the foremost of which is that you don't want to introduce a generation of quality loss due to compression right at the outset.

7 to x - and proxy files ...

Can anyone help ?
I'm trying to re create a FCP7 edit within FCPX. I've done all the exporting XML files etc, and I've now got the 7 edit on the X timeline. However it's all 'Missing Proxy'. Is there a quick way to re create the proxy files rather than selecting one clip at a time ?
Better still, is there a way to ONLY create the proxy files on the timeline, and NOT in the event viewer. Some of the timeline clips belong to VERY long event clips and so it won't allow me to create. I've tried selecting a timeline clip and then selecting relink event files, going through the process but it doesn't connect
Any ideas
Thanks

John @ Red Dot wrote:
Thanks for that.
Unfortunately I do need to work in proxy. I use a MBP and all my media is on seperate drives (years worth). Ideally I just need a way to create JUST the timeline in proxy media as some of the original clips are too large, and for this project I only need a few snippets into FCPX
I am afraid you can't create proxies for just the bits that are in the timeline.

I received a gift card and when I redeemed it an error message said that I had some itunes files missing and that I needed to reinstall itunes. Will I still have all my credits when I download itunes?

I received an online gift card for Father's Day. When I tried to redeem the gift then I received a error message saying I had some itune files missing and I needed to reinstall/download itunes. Will I still have my previous purchase credits after downloading and reistalling itunes?

You will, because the credited funds are on your iTunes account, not the application. When you reinstall iTunes just configure it with your old iTunes account and your credits will be there waiting for you.

New itunes update, now itunes wont open keeps saying files missing

doiwnloaded new update, now itunes wont open saying files missing. help

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

XML publisher report with a template file missing

I get the following error
Active template file not found in the template definition <TEMPLATE_NAME> for date <EFFDT>. (235,2515)
PSXP_RPTDEFNMANAGER.TemplateDefn.OnExecute Name:GetActiveTemplateFile PCPC:15872 Statement:346
but in
Reporting Tools > XML Publisher > Report Definition > Template tab
I did have the setting Effective date, what cause the problem?

Have a look at following post and run the sql in this post to see if your template definition is missing.
http://peoplesoft.wikidot.com/xml-publisher-template-file-missing
You could also run Application Engine PSXPCLEAN to clean orphan rows.
Are you running the report online or through PeopleCode?
In last case make sure the effdt is set correct in PeopleCode.
Also have a look if your server time settings are correct.
Hakan

My iPOD comes up with 13019 error message file missing please help!

My iPOD Nano will not sync and comes up with an error message 13019 file missing can you pelase help?

Try rebuilding your iTunes Library:
(This will cause all devices to see your library as a "new" library)
1. Open iTunes.
2. File>LIbrary>Organize Library: Consolidate Files.
-This process may take some time.
3. Quit iTunes.
4. Browse to your iTunes Folder.
5. Drag the files to the desktop, but leave the folders in place (folders will be iTunes Media, Album Artwork, Previous iTunes Libraries)
6. Open iTunes.
7. File>Library>Import Playlist.
8. Direct iTunes to import the "iTunes Library.xml" that is sitting on your desktop.
9. Once the process is complete attempt to resync your iPod.
EE

Music files missing/hidden in folder on network hdd

Hi all,
I have setup my home net work with a iMac (mountain Lion) backed up by a TimeCapsule and at the back of the TimeCapsule I have a 2TB networked external HDD. My iTunes library is located on this HDD, I take care not to start up iTunes before this networked external HDD has propoerly mounted to avoid any conflicts with links to my itunes library files and folders.
The other day I noticed a few missing files (the dreaded exclamation mark !), not too bad a figured, I located a few manually but reached some that does my head in...... Out of the whole album there are two files "missing", the other ones play as they should. When I try and locate the missing files the folder comes up empty.....
I have even checked the songs that do play in the same album....they dont show up either, even though they still play in iTunes (yes, they are all located at the same location). The album was originally ripped from a CD and I don't use iTunes Match or Genius.
I have tried to find the files by:
1."open in finder" - files missing / whole folder empty
2."through finder and located the drive and folder" - files missing / folder empty
3."copy file location from "get info" and paste into "go to folder" - the file temporarily appears in the finder window but dissapears shortly after / folder yet again empty.
4. I check the folder "get info" from my finder and it says "zero bytes"
5. I can't use Search because its on an external HDD and there fore not indexed
6.I have tried to copy the folder to the desktop but still shows empty....
7. I have tried to "organise" my library, still no change.
What the..xxx..is happening..?
From what I can gather, the files are actually there but not visible through the finder window (even though the folder appears to be 0 bytes).
The problem being that I can't locate my missing files because I cant see them any more......
Am I missing something (like show hidden folder on a Mac) or has it got to do with anything else...? How can I fix it..? I have found posts that relate to windows users forced their W7 to show hidden folders but nothing yet on Mac.....
Help.
//Fred

I was lucky to be able to use a PC, that after trying numerous times actually read the external hdd, I quickly copied all files over to a backup hdd and recovered all files. After that I ended up in contact with Western Digital about the incident and they recommended to completely erase (7-pass erase) of the hdd, which ended up taking over 5 days to do. They gave me no reason as to "Why" it would have happened but if I erase and reformatted of the hdd and the problem reoccurred they recommended to get the unit replaced.
I was lucky to recover all my files.....keep trying on different computers if you can, and copy what you can get hold of. The 7-pass erase will delete pretty much every trace of information on the hdd with no chance of recovery.
So far since the incident its been running ok but I not longer trust the hdd to be stable. Not a simple nor quick process / solution I'm afraid.
Good luck!
Once you have recovered your files (or as many as you can get hold of) and ready to erase the hdd:
(THIS WILL ERASE ALL YOUR DATA, MAKE SURE YOU HAVE A BACKUP BEFORE PROCEEDING)
Connect the drive directly to the Mac, open Disk Utility.
Select the drive and click on the "Erase" tab Select the "7-times zeros" to completely erase the drive.
Once the erase have completed format the drive to your selection.

I am having a hard time with fcpx, it is running so slow. i upgraded my ram to 12 and have cleaned up my computer to run faster and have changed all my files to proxy files but it is still running SO slow. please help!

I am having a hard time with my fcp x running so slow. i can't even move my mouse without the time wheel coming on and staying up for at least 20 some seconds. I have upgraded my ram to 12 and changed all my files to proxy files; also i cleaned the crap out of my computer removing all other media files I didn't need and it is still running the same. Please help! I have a deadline on my short film to be submitted and I can't finish it like this. Oh also it ran fine in the beginning but and one day it just started doing this out of no where. Anything will help! Thanks

In addition have you got FileVault switched on as that will kill performance.

Interface ABAP Proxy - File - Synchronous - (Is it possible???)

Hi Experts,
I want execute ABAP Proxy which will create File in FTP. On final, i need return "OK" information to the ABAP Proxy.
Is it possible? ABAP Proxy <-> File Synchronous? Without BPM and Custom Module Adapter. Just using RequestResponseBean???
Tks in advance.

Hi Raj,
Tks. I implemented the Acknowledgements Request and changed the ABAP Proxy to Async. But the Ack returns to the ECC with the error and is not saved in the Message. The error follows below:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="PERSIST">REQUEST_MESSAGE_NOT_FOUND</SAP:Code>
<SAP:P1>4EE24DEB4EA60650E10080000A09071E</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3></SAP:P3>
<SAP:P4></SAP:P4>
<SAP:AdditionalText></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace=""></SAP:ApplicationFaultMessage>
<SAP:Stack>Requisição mensagem 4EE24DEB4EA60650E10080000A09071E pipeline CENTRAL versão desconhecida</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Any Idea about this error?
Tks in advance.

File process - some files missing in processing

Hi,
I am using the below code to create drives on network.
This exe file is used by ILM as part batch job. The job will pick input files from local drive.
Query: While executing this job some input files are missing so for them drive is not created. Please let me know what could be the reason and how to resolve? let me know how to avoid file missing without processing?
System.Diagnostics.Process cmd = new Process();
cmd.StartInfo.UserName = "ad_user";
cmd.StartInfo.Domain = "domain";
cmd.StartInfo.Password = "password";
cmd.StartInfo.WindowStyle = System.Diagnostics.ProcessWindowStyle.Hidden;
cmd.StartInfo.FileName = @"d:\miis\createdrive.cmd";
cmd.StartInfo.WorkingDirectory = @"d:\miis\";
cmd.StartInfo.UseShellExecute = false;
string these_args = string.Format("{0} {1} {2}", domain, ocgsamaccountname, ocgpathtocreate);
cmd.StartInfo.Arguments = these_args;
try
Console.WriteLine(cmd.Start());
if (!cmd.WaitForExit(15000))
skip_delete = true;
jaya

Found the issue:
At first glance my itunes music folder looks normal, but after some careful reading of the location data...it turns out all of my music is also stored in a subfolder "MUSIC" in with all the artist names. I found this after discussing with a genius today while having my battery replaced. Together we found the issue.
How? iTunes at some point started making a MUSIC and MOVIES and maybe some other folders in the iTunes folder. When I redid my library some time ago, it must have changed the directory and copied all my music to the user/music/iTunes/iTunes Music/Music folder. This would also explain why I found that sometimes my library took up more data than I had expected. iTunes would say 45 GB but the folder would say 90GB.

Photoshop elements 10 won't open, says files missing. Reinstall. Trying to reinstall but won't run. Nothing works. Using Windows 7.

Photoshop elements 10 won't open, says files missing. Reinstall. Trying to reinstall but won't run. Nothing works. Using Windows 7.
How do I reach tech support?

http://forums.adobe.com/message/5506764#5506764

I have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing wht to do???

i have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing wht to do???

Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
I assumed that you have tried the other USB 2.0 port to no success..
Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
Have a nice day!

Proxy files missing

Similar Messages

Maybe you are looking for