Proxy Generation internal error object not found.

Hi
We have BW-XI implementation .Recently an error has started popping up , while the checking the proxy in tcode sproxy.
Error is - Proxy generation internal error , <message> not found, check failed . However when I double click on the proxy and do a check its fine and we are able to load data in BW successfully .
Does any one have a clue on this and how important is this check on the first screen of sproxy ? Thanks in advance .

Hi......Kapil,
proxy's mainly based on msg interfaces.with out creating msg interface we can't do proxies.For this logon to IR & create data & msg types & then msg interfaces.
after complition of this process.Under proxy generation screen u can see the following details .......
Ur data type,msg type,& ur interface...
regards,
Naresh.K

Similar Messages

TTS - Internal error User not found error

DB version:10.2.0.4
OS - AIX6.1
Could someone let me know how to resolve this error?. I'm running an export of metadata for TTS using the command below. The TTS export is working fine on other tablespaces of the same database.
I'm running export with "/ as sysdba".
expdp DUMPFILE=<>.dmp DIRECTORY=xtts_dir logfile=<>.log TRANSPORT_TABLESPACES=TBSP1,TBSP2,TBSP3 transport_full_check=y
ORA-39123: Data Pump transportable tablespace job aborted
ORA-29336: Internal error [user not found] [48] from DBMS_PLUGTS
Job "SYS"."SYS_EXPORT_TRANSPORTABLE_06" stopped due to fatal error

It seems my issue is due to the streams admin user. The streams replication was setup on the objects under these tablespaces. The streams replication was removed and strmadmin user is also dropped. I have enabled trace and got the below message in the trace file. Does any of you face the same issue?.
ORA-39123: Data Pump transportable tablespace job aborted
ORA-29336: Internal error [user not found] [48] from DBMS_PLUGTS
Streams : knlcfdrl
error 604 while looking up the Streams tables.
kwqaadqrs: error 39119 during add rule Here is the command used for removing streams.
execute DBMS_STREAMS_ADM.REMOVE_STREAMS_CONFIGURATION();

Problem with WCS, with an error message (Error: Object not found in device)

I have a problem with WCS, I can not open the window monitor / controllers with an error message (Error: Object not found in device) -> https: / / 10.19x.xxx.xx/webacs/switchDetailAction. do? ControllerID = 23735
by cons I can open the window configures / controllers -> https: / / 10.19x.xxx.xx/webacs/switchGeneralAction.do? command = detail & ControllerID = 23735
Is there a way to recreate the database or the object? thank you in advance

thank you for your help
Unfortunately, the command "refresh config from controller" does not solve the problem because we have a negative result
(in mode retain or in mode delete) with the following logs :
Log file wcs-0-0.log
10/19/10 12:07:16.333 ERROR[snmpmed] [23] Response VarBind missing for class InterfaceConfig attribute isInterfaceWired
Log file tomcat_localhost_access_log
10.197.xxx.xx - - [19/Oct/2010:12:07:16 +0000] "POST /webacs/switchListCommandAction.do HTTP/1.1" 200 47399
10.197.xxx.xx- - [19/Oct/2010:12:07:16 +0000] "GET /webacs/alarmSummaryAction.do?command=summary&dojo.preventCache=1287490037130 HTTP/1.1" 200 421

Internal error: data not found message

Every time I try to upload pics I get this message:
internal error: data not found
How can I fix this problem? Thank you so much, Stacey

Please explain in detail about the process you are trying to perform...Do tell if any settings or any change in preferences you have made. How many files you rae trying to upload. Your account is not expired and you are admin etc.
-Garry

XI--- OpenJMS error Object not found in lookup of XIJMSService

Hi all,
I am trying XI-->OpenJms (Server).
I have included openJms.jar library in aii_af_jmsproviderlib.sda and deployed using SDM.
In JMS receiver adapter I am using the following Configuration:
Transport protocol: JMS Provider with JNDI .
Queue connection factory : org.exolab.jms.client.JmsConnectionFactory
JNDI-Name JMSQueue: org.exolab.jms.client.JmsQueue
Context Factory : org.exolab.jms.jndi.InitialContextFactory
JNDI-Server adress :tcp://10.1.102.5:3035
In RWB i am getting the following for this scenario:
Error Exception caught by adapter framework: Object not found in lookup of XIJMSService.
Kindly help what other configurations are required.
Best Regards,
Lemine

Hi Sebastian,
I have still the same problem.
could you send me a screen shot with your configuration?
(openjms configuration).
my email: [email protected]
I have the following standard configuration in my modul:
Verarbeitungssequenz:
Modulname: Type:
ocalejbs/SAP XI JMS Adapter/ConvertMessageToBinary L
localejbs/SAP XI JMS Adapter/SendBinarytoXIJMSService L
could that cause for that prblem ?
Thanks for helpful answer.
best regars.
Lemine.

XI error: Object not found in lookup of RfcAFBean

Hi Forum,
In a scenario, I have a BPM, which makes a synchronous call to R/3 for execution of a rfc enabled Function module, while doing so, it gives an error as a response, which i can see in the MONI:
<b>com.sap.aii.af.ra.ms.api.DeliveryException: Object not found in lookup of RfcAFBean</b>
what can be the reason for the error? and how can it be avoided?
pls help

it might be a cache problem, run the CPA cache and check.
ir, id cache the data here also.

PI Seeburger AS2 Error: Object not found in lookup of as2..

Hi ALL
Can you please help us understand which object the following error refers to....
Delivering the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2..
Your help is greatly appreciated!!
Thank you,
Patrick

Please check the module chain (module configuration). Very likely reason is that you have the solutionid module as2 defined (which is default) but forgot to deploy the solution id module (you can find it in the distribution tools folder. Name of the deploy file: SeeXISolutionIdModule.ear).

Webutil runtime error, object not found

Hi,
I´m trying to use webutil, but i cant even run the demo. When the first webutil function is called, theres a exception because its not found, although there is no error in connecting the library.
If someone has a hint,that would be very kind.
Thanks

upload the folder named Scripts to the remote site.
http://www.bruzzies.com/Scripts/AC_RunActiveContent.js
is 404 not found.
http://www.bruzzies.com/tuffpodcast/index.html
<script src="../Scripts/AC_RunActiveContent.js"
type="text/javascript">
> www.tuffpodcast.com

Error: Internal Error: 404 Not Found (116001)

Receiving this message on every attempt to publish this site. (all other sites are working okay)
Anyone familiar with the specifics?

You should have a file named 'MuseLog.txt' in your user Documents folder which should contain more information about this error. Please email that file to [email protected] along with a link to this topic so we can investigate.

Loadrunner error object not foun trueclient

trueclient script for oracle adf technology, when replaying the script error "object not found appear" "t=00023125ms: Error -203256: ** 2.1: Move mouse over element (1) ** failed - target object was not found. [MsgId: MERR-203256]"
how i can solve this problem?

Hi Aditya,
Your system should have the changes of note 7288991(through support packs) but still If you read the note carefully it would have been mentioned that,
You will still end with an error if the CO object had been created and archived before even processed at least within one period
The Error is aroused when the system tries to read the Reconciliation objects from the ONRAO table and it couldnt find the data in that table. This occurs in the FM FERC_MASTER_DATA_READ
The best way to solve this issue is check with your client if they have deleted any CO objects within one period if they havent done it go ahead and seek SAP help (request for OSS notes).
Regards,
Praveenkumar T.

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.

This thread is pretty old, are you still having this issue?

Error in AS2 adapter. Object not found in lookup of as2.. Its urgent..!!

Hi AS2 experts,
*When i tried sending an xml to partner system using AS2 adapter.. Mapping is succesfull and message is failing in receiver AS2 adapter.
1. I used the following parameters in AS2 Module.
ModuleName                                                       Module Key
localejbs/Seeburger/solution/as2                              solutionid
localejbs/ModuleProcessorExitBean                          exit
ModuleKey    ParameterName         ParameterValue
exit                JNDIName     deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
Iam getting the following error.
Success     MP: Processing local module localejbs/Seeburger/solution/as2
Error :   MP: Exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2.
Error : Exception caught by adapter framework: Object not found in lookup of as2.
Error : Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of as2.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2..
2. When i tried by removing Modulename "localejbs/Seeburger/solution/as2"
It is showing the below error like AS2ID is missing.. but its there in party configuration.
Error :
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing..
Can anyone has idea what might be wrong.
Kindly suggest me asap.
Thank You.
Regards
Seema.

Hi,
Plesae go through below links
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
and
Check with below configuration
Configuration for AS2 or simple file adapter.
We are using this module configuration for converting EDI D96A format to XML:
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
bic destSourceMsg MainDocument
bic destTargetMsg MainDocument
bic logAttID ConverterLog
bic mappingName See_E2X_ORDERS_UN_D96A
bic saveSourceMsg ORIGINAL_EDI
can someone please tell me the module configuration for reverse mapping at receiver end,i.e.,XML to EDI D96A
basically,I need mapping name for this.
Scheme=AS2ID
Name = WAN network no of the partner who is sending the file
Sender AS2 adapter configuration:
Few changes in the module parameter tab.
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_E2X_EDIFACT_ORDERS_UN_D93A which does the conversion of EDI-XML.
Receiver AS2 adapter configuration:
When the adapter is used in a receiver channel, it obtains a message from the Integration Engine and sends it to a business partner. In this case, the following steps are required:
1. Define the channel as a Receiver channel on the Parameters tab
2. The last step ensures the module sequence is complete:
Make sure the module ModuleProcessorExitBean does exist in the module sequence:
Module Name=localejbs/ModuleProcessorExitBean
Type=L
Module Key=Exit
with the following module parameter:
Module Key=Exit
Parameter Name=JNDIName
Parameter Value=deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
File receiver:
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_X2E_EDIFACT_ORDERS_UN_D93A
ONly the mapping program name changes from E2X to X2E. IN ur case it will be See_X2E_ORDERS_UN_D96A
Thanks
Swarup

ERROR:NameNotFoundException: Object not found in lookup of MYDB

NW 7.0 SP3
I have defined a datasource MYDB by VA,and it tests OK.
I wonder about how to use it in J2EE project or in WebDynpro Project.
I created a J2EE project ,in the Web Model ,i new a class Test:
public static Connection myconn(){
     Context ctx = new InitialContext();
     Connection conn = null;
     DataSource dataSource = null;
     dataSource = (DataSource) ctx.lookup("MYDB");
    conn = dataSource.getConnection();
    return conn;
then in webcontent ,I new a JSP page:
<%
Connection conn = com.Test.myconn();
java.sql.Statement st = conn.createStatement();
String str = "select * from TMP_NAME";
ResultSet rs = st.executeQuery(str);
rs.next();
String str1 = rs.getString(1);
%>
after build and deploy the *.ear,the server returns an error:
         com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of MYDB.
Now I do not know anything else should I do,such as create a reference,and so on.
Thanks for you all help!

Hi,
Try the code as below:
DataSource ds = (DataSource) context.lookup("java:comp/env/jdbc/MYDB")
Go through the below help link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/82/fdbf2085f65f43a71e755fc904478d/content.htm
Go through the below thread for more info:
Re: datasource using VA
Regards,
Charan

Object not found in lookup of BAPI_USR01DOHR_G, error key: RFC_ERROR_SYSTEM

Hi SDN,
I am getting the following exception , When click on Equipment Card in Work Environment, ESS.
Bean BAPI_USR01DOHR_GETEMPLOYEE not found on host XXX, ProgId=XXX: Object not found in lookup of BAPI_USR01DOHR_G, error key: RFC_ERROR_SYSTEM_FAILURE
Please help me out to resolve this issue.
regards,
Sree.

Hi Lukas,
Following is the dump in /nwa.
Bean BAPI_USR01DOHR_GETEMPLOYEE not found on host EPBIDEV, ProgId=SAPSLDAPI_DV1: Object not found in lookup of BAPI_USR01DOHR_GETEMPLOYEE.registered entries for FuctionName=JNDIName : {GET_AWF_LOCALIZED_STRING=PRTRFC_BASE, GET_AWF_SUBPROC_LOG_DATA=PRTRFC_BASE, RSWR_ZIP_STREAM_GET=PRTRFC_BASE, SALV_WD_EXPORT_PDF=PRTRFC_BASE,... [see details]
Full Message Text
Bean BAPI_USR01DOHR_GETEMPLOYEE not found on host EPBIDEV, ProgId=SAPSLDAPI_DV1: Object not found in lookup of BAPI_USR01DOHR_GETEMPLOYEE.registered entries for FuctionName=JNDIName : {GET_AWF_LOCALIZED_STRING=PRTRFC_BASE, GET_AWF_SUBPROC_LOG_DATA=PRTRFC_BASE, RSWR_ZIP_STREAM_GET=PRTRFC_BASE, SALV_WD_EXPORT_PDF=PRTRFC_BASE, RSWR_SYSTEM_ALIAS_CHECK_PROXY=PRTRFC_BASE, RSRD_X_MAP_TO_PRTL_USERS_PROXY=PRTRFC_BASE, RSPOR_SHORT_TO_URL_CONVERT=PRTRFC_BASE, CPETEST=PRTRFC_BASE, LSO_COL_GET_TEMPLATES=PRTRFC_BASE, RSWR_SAP_ROOT_FOLDER_GET=PRTRFC_BASE, LSO_COL_GET_EXT_ROOMACCESSURL=PRTRFC_BASE, RSRD_GET_PORTAL_USERS=PRTRFC_BASE, CREATE_AWF_TASK=PRTRFC_BASE, CANCEL_AWF_SUBPROCESS=PRTRFC_BASE, RSRD_X_GET_PORTAL_INFO_PROXY=PRTRFC_BASE, RSRD_X_PRODUCE_PROXY=PRTRFC_BASE, LSO_COL_GET_TEMPLATE_INFO=PRTRFC_BASE, RSPOR_PORTAL_CALL=PRTRFC_BASE, RSWR_RFC_SERVICE_LISTENERS_GET=PRTRFC_BASE, LSO_COL_GET_PORTAL_USER=PRTRFC_BASE, RSDAS_X_PROV_DESCRIBE_PROXY=PRTRFC_BASE, LSO_COL_SET_ROOM_USERS=PRTRFC_BASE, RSWR_URL_QUERY_COMPRESS_PROXY=PRTRFC_BASE, LSO_COL_CREATE_ROOM=PRTRFC_BASE, RSRD_MAP_TO_PORTAL_USERS=PRTRFC_BASE, RSTT_TRACE_BI_PORTAL_START=PRTRFC_BASE, RSOD_MIGRATE_DOCUMENT_PROXY=PRTRFC_BASE, LSO_COL_DELETE_ROOM=PRTRFC_BASE, RSWR_LOGGER_CONFIG_SET=PRTRFC_BASE, RSWR_BINARY_CONTENT_GET=PRTRFC_BASE, RSPOR_SETUP_CHECK=PRTRFC_BASE, RSWR_FOLDER_CONTENT_GET=PRTRFC_BASE, RSDAS_X_PROV_OBJECT_DET_PROXY=PRTRFC_BASE, LSO_COL_GET_ALL_CATEGORIES=PRTRFC_BASE, LSO_COL_GET_ROOMS=PRTRFC_BASE, UWL_PUSH_ITEMS=PRTRFC_BASE, RSWR_TEMPLATE_PROCESS_PROXY=PRTRFC_BASE, RSWR_PREEXECUTION_PROXY=PRTRFC_BASE, LSO_COL_REMOVE_USER_FROM_ROOM=PRTRFC_BASE, RSWR_BOOKMARK_ADJUST_PROXY=PRTRFC_BASE, RSRD_X_GET_INFO_PROXY=PRTRFC_BASE, RSWR_JAVA_VERSION_INFO_GET=PRTRFC_BASE, RSWR_RFC_SERVICE_TEST=PRTRFC_BASE, RSRD_BROADCASTING_KM_RFC=PRTRFC_BASE, LSO_COL_GET_ROOM_USERS=PRTRFC_BASE, RSWR_ROOT_FOLDER_GET=PRTRFC_BASE, LSO_COL_ADD_USER_TO_ROOM=PRTRFC_BASE, RSWR_ABAP_EXCEPTION_TEST=PRTRFC_BASE, RSWR_SERVICE_DISPATCHER_TEST=PRTRFC_BASE, RSRD_STORE_ONLINE_LINK=PRTRFC_BASE, RSWR_CLUSTER_INFO_GET=PRTRFC_BASE, LSO_COL_GET_INT_ROOMACCESSURL=PRTRFC_BASE, LSO_COL_GET_ROOM_OWNERS=PRTRFC_BASE, BICS_CONS_GET_VIEW_DEF_J_PROXY=PRTRFC_BASE, RSWR_TIME_GET=PRTRFC_BASE, GET_AWF_SUBPROC_ATTACHMENTS=PRTRFC_BASE, LSO_COL_GET_ROOM_PRIVACYTYPES=PRTRFC_BASE, RSWR_STRING_CONTENT_GET=PRTRFC_BASE, RSRD_FOLDER_WRITABLE=PRTRFC_BASE, RSWR_LOGGER_CONFIG_GET=PRTRFC_BASE, RSWR_CACHE_INVALIDATE_PROXY=PRTRFC_BASE, RSWR_RFC_VERSION_INFO_GET=PRTRFC_BASE, RSOBJS_GET_PORTAL_VIEWS_RFC=PRTRFC_BASE, RSWR_SESSION_TERMINATE_PROXY=PRTRFC_BASE, RSPOR_NODES_READ=PRTRFC_BASE, RSPOR_NODES_SAVE=PRTRFC_BASE, RSRD_X_DISTRIBUTE_PROXY=PRTRFC_BASE, SUWL_NOTIF_PUBLISH=PRTRFC_BASE, LSO_COL_GET_ROOM_INFO=PRTRFC_BASE, RSDAS_X_PROV_PROCESS_PROXY=PRTRFC_BASE, RSPOR_URL_TO_SHORT_CONVERT=PRTRFC_BASE}
All JCos are tested successfully.
regards,
Sree.
Edited by: sree pedasingh on Mar 22, 2011 10:48 AM

ERROR - clsid-not-found(Object::Remote::CLIENT|(Object::Remote::PROTOCOL_LOCAL|PSQL::TrayAppSvr:: 00000001)CID_SafeArchive::FileArchiveCache))

Hi,
I have Windows 7 Professional (PT) installed with Adobe Master Colection CS 6. The error "clsid-not-found(Object::Remote::CLIENT|(Object::Remote::PROTOCOL_LOCAL|PSQL::TrayAppSvr: :00000001)CID_SafeArchive::FileArchiveCache))" start to show a week after using the computer.
I don't know if the error it's from windows or from any software of the Adobe. How can i solve this problem?

Well "Protector Suite QL" is some security tool and apparently it requires authentication procedures and blocks access to critical system routines. You need to fix that. Nothing to do with Adobe at all.
Mylenium

Proxy Generation internal error object not found.

Similar Messages

Maybe you are looking for