Proxy Icon in TextEdit titlebar created HUGE file when dragged into Finder

Hi everyone, Hope you can solve this mystery...
I just noticed that the Titlebar of my TextEdit window has a small icon next to the filename (aka "Proxy icon"). I realized that it's draggable, so I decided to do little test to test it's functionality.
- I created a small file with one word in it "test" and saved it as "test file.rtf" in a subfolder under Documents; and
- With the file still open, I dragged the Proxy Icon into a Finder window to the Desktop folder.
When I looked for the file in Finder, I was shocked to see that:
- It created a HUGE file...the original file is only 306 bytes in size, but the one I created by dragging shows 2.3 MB !
- The dragged file also has the appearance of an "Alias" file b/c the Finder window show3s a document icon with a curved arrow next to the filename.
Questions:
1) Why would Maverick use an Alias symbol on a file that is clearly not an Alias based on it's size?
2) Why is the file so much larger than the original?
I searched online for answers but found none, so I thought I'd give this forum a try.
btw - in case you're wondering, I did not open the dragged file b/c I didn't want to take any chances.
Thanks in advance.
C
OSX Maverick
Mac Mini (purchased new approx 6 months ago)

You can avoid the hassle of the Terminal with this contextual menu add on: SymbolicLInker. It's just a right click away:

Similar Messages

Cannot create a file when that file already exists, but should overwrite

Hi,
I need the same file name which is at Sender side and when it reaches to Receiver directory without timestamp.
for eg., Sender side : Yeswanth.txt
and also receiver side : Yeswanth.txt
but, here it should overwrite the existing file (because, the sender side file name is always constant) at receiver directory when the job schedules for each time.
Processing parameters i has given on Receiver side:
File Construction Mode : Create
put file : Use Temporary File
and I enabled the Adapter Specific Message Attributes at Sender side and Receiver side.
Error getting receiver side at communication channel :
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException:
Yeswanth.txt: Cannot create a file when that file already exists. : com.sap.aii.adapter.file.ftp.FTPEx: 550
Yeswanth.txt: Cannot create a file when that file already exists.
Reward points for useful answers.
Regards,
Yeswanth.
Edited by: YeswanthRaj Kumar on May 23, 2008 8:20 AM

Hi Yeswanth
Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
Will this be fine.
Regards
Ashmi

FTPEx: 550 : Cannot create a file when that file already exists.

Hi experts,
I am working on idoc to file scenario and PI 7.1. The idoc is split into 3 files.
In sxmb_moni , the message is successful , but in rwb( Message montoring) i am geeting the fllowing Error message.
' Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server '172.19.125.190:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /Storedata/Outbound/0000001802: Cannot create a file when that file already exists. '. For details, contact your FTP server vendor..'
and this error message is not displayed for all the target files , some files are getting created succesfully.
After some times , the file in error status , gets created automatically.
What may be the reason.?
Thanks in advance .
Best Regards,
Anil

There seem to be already some files in your Target Directory with the same name as your new files (which the CC is trying to place) and the CC is not able to overwrite the existing files and hence the error...check this.
Check: http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/69d7cfa4b633eae10000000a1553f6/content.htm
14. Select the File Construction Mode.
u25CB Create
The file is created. The document received last is saved in each case.
If you want the created file to be overwritten, select Overwrite Existing File. If you do not set the indicator, processing is stopped until the created file is processed.
You can only set the indicator if you select Use Temporary File under Put File below.
Regards,
Abhishek.
Edited by: abhishek salvi on Jul 28, 2009 6:59 PM

Cannot rename DC, "Cannot create a file when that file already exists."

Hi,
A long time ago we used a domain controller named jacob.mydomain.lan. It was removed, possibly in a 'dirty' way, and now we cannot re-use that name for another domain controller. In the meantime we have upgraded to Win 2012 domain controllers
now, and when I enter this to rename:
netdom computername ourdc.mydomain.lan /add:jacob.mydomain.lan
I get the error: "Unable to add jacob.mydomain.lan as an alternate name for the computer. The error is: Cannot create a file when that file already exists."
If I enter:
netdom computername ourdc.mydomain.lan /remove:jacob.mydomain.lan
I get: "The command completed successfully", but it still refuses to add jacob.mydomain.lan
After each attempt to add a forward zone dns record 'jacob.ourdomain.lan' has been created. I always erase this manually afterwards.
What is the problem? How can I search to find the offending 'file' named 'jacob'?
Thanks a lot for help on this.
regards Tor

Kevin,
I suggest you wait 30 days instead of 3 days before you enthusiastically close threads. Some people might think you are being a jerk if you don't.
"K_evin Zhu" wrote in message
news:[email protected]...
Hi,
As this thread has been quiet for a while, we will mark it as �??Answered�?? as the information provided should be helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up. You can also choose to
unmark the answer as you wish.
BTW, we�??d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. Thanks for your understanding and efforts.
Best Regards
Kevin
Tomás Mason

The cluster service terminated, error 7024, cannot create a file when that file already exists

I have a test 2-node Failover cluster using Server 2012 R2
As of last night the cluster service on one of the 2 nodes is down with this error:
The Cluster Service service terminated with the following service-specific error:
Cannot create a file when that file already exists.
EventID 7024
The Cluster service waits 60 sec, tries to start, and the same error occurs again.
Any idea where to look to identify which file this error is referring to, or how to go about identifying root cause and getting a solution?
thank you.
samb

Hi Yeswanth
Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
Will this be fine.
Regards
Ashmi

Cannot create a file when that file already exists

When i try to use Photoshop filters: Adaptive Wide Angle, Shake Reduction and Liquify. An error pop up saying "Cannot create a file when that file already exists".
Just one detail: The liquify filter doen't pop up the error right away, the error occurs just after i press the "ok" button to accept the changes.
I have already tryed to Reset the preferences, tryed to reinstall the PS, Update the PS, download (and install) the latests drivers to my pc.
My Pc fit in all the requirements, have the openGL version: 3.0
I also have Photoshop CS5 installed, in which the liquify filter works perfectly.
Here i have two Print Screen, how it looks:
The first image is just right before a click the "Adaptive Wide Angle"
The second one is right after i clicked it
If you could help me, i already thank you for wasting you time reading this!

Resetting the Photoshop preferences does not reset the preferences for the plugins.
There should be a Plugins folder. If the folder cannot be created it would cause the error you are seeing.
Can you check the permissions on the ‘Adobe’ folder at: C:\Users\jworthin\AppData\Roaming\Adobe.
Can you manually create a Plugins folder in that location or do you get an error?

Applescript - Create RTF File in Last Selected Finder Folder

QUERY: As a fit-for-purpose Applescript user, I try to customize posted scripts (thanks to sharers who do the heavy lifting) to suit my needs. Someone posted a great Applescript for creating an RTF file, but I want one modification: rather than having to declare/designate a folder in which to place the new RTF, I want it to create the new file in the active Finder file. Interestingly enough, I also have an Appscript which, in fact, will create a TXT file (not RTF) in the active Finder file. How to take the desirable bit from the latter and working it into the former, I cannot figure. (More times than not, I can successfully blend scripts, but not so this time. I have hit something that requires expert help.)
REFERENCE MATERIAL: First, the current Applescript for creating an RTF. Then, for reference, the Applescript for creating the TXT.
Kind regards,
Obenreizer
=========start RTF creation applescript==========>
tell (current date) to get ((its year) * 10000 + (its month) * 100 + (its day)) as text -- yyyyMMdd
tell the result to set TheDate to text 3 thru 4 & "." & text 5 thru 6 & "." & text 7 thru 8 -- yy.mm.dd
-- QUERY: CAN THIS BE CHANGED TO THE ACTIVE FINDER FOLDER?
set TheFolder to choose folder
-- or can assign a specific "path" (including quotation marks)
set TheName to text returned of (display dialog "Enter the name for the new document:" with title "New text document" default answer TheDate & " - " buttons {"Cancel", "OK"} default button "OK")
set TheFile to (TheFolder & TheName & ".rtf") as text
set TheText to "{\\rtf1\\mac\\ansicpg10000\\cocoartf824\\cocoasubrtf440
{\\fonttbl}
{\\colortbl;\\red255\\green255\\blue255;}
\\margl1440\\margr1440\\vieww9600\\viewh8400\\viewkind0
try -- create a new text document
    tell application "System Events" to get exists of file TheFile
    if not (the result) then
        set TheOpenFile to open for access TheFile with write permission
        write TheText to TheOpenFile as «class utf8» starting at eof
        close access TheOpenFile
    else
        display alert "The file \"" & TheFile & "\" already exists" as critical
        error
    end if
on error
    try
        close access TheOpenFile
    end try
    return
end try
tell application "Finder" to set extension hidden of (TheFile as alias) to true
tell application "TextEdit" -- open the file and print date
    activate
    open file TheFile
    set the text of document 1 to ((current date) as text) & return
end tell
<=========end RTF creation applescript==========
=========start TXT creation applescript==========>
tell application "Finder"
    try
        set fileName to "untitled"
        set fileExt to ".txt"
        set thisFolder to the target of the front window as alias
        tell application "System Events"
            set fileList to get the name of every disk item of thisFolder
        end tell
        set newFile to fileName & fileExt
        set x to 1
        repeat
            if newFile is in fileList then
                set newFile to fileName & x & fileExt
                set x to x + 1
            else
                exit repeat
            end if
        end repeat
        make new file at thisFolder with properties {name:newFile, file type:"TEXT", creator type:"ttxt"}
        --{TO HIGHLIGHT CREATED FILE: select one one of the next three choices}
        --select (every file of target of front window whose name contains "untitled")
        --select (first file of target of front window whose name contains "untitled")
        select (last file of target of front window whose name contains "untitled")
    on error errMsg
        display dialog (errMsg)
    end try
end tell
<=========end TXT creation applescript==========

Well, copy the above file into this file where the files is created. See my comments.
=========start TXT creation applescript==========>
tell application "Finder"
    try
        set fileName to "untitled"
        set fileExt to ".txt"
        set thisFolder to the target of the front window as alias
        tell application "System Events"
            set fileList to get the name of every disk item of thisFolder
        end tell
        set newFile to fileName & fileExt
        set x to 1
        repeat
            if newFile is in fileList then
                set newFile to fileName & x & fileExt
                set x to x + 1
            else
                exit repeat
            end if
        end repeat
-- Here is the line where the text file is create. it is in folder thisFolder seems the name is in newFile.
        make new file at thisFolder with properties {name:newFile, file type:"TEXT", creator type:"ttxt"}
        --{TO HIGHLIGHT CREATED FILE: select one one of the next three choices}
        --select (every file of target of front window whose name contains "untitled")
        --select (first file of target of front window whose name contains "untitled")
-- don't know what this line is doing, but I suppose it is highlight the new file since it is named untitled.txt
        select (last file of target of front window whose name contains "untitled")
    on error errMsg
        display dialog (errMsg)
    end try
end tell
<=========end TXT creation applescript==========

How to create a file when i run the report

hi all
i want to run the report and each time i run the same report to create a separate word file for the report o/p ?
is there exist a procedure to create a fiel?

hi magoo thanks for your consederation
i use forms 10g
But your answer is to create the file , but when i run the report next time the file overided by the new file ,
But i want to generate a new file beside the old created file (how can i create separate file althouth the file name take the same name of the report)
thanks.

Premiere CS4 is Creating Multiple files when rendering

We have used Adobe Premiere for just over seven years now with great success. Five days per week we create videos with Adobe Premiere with three computers. We presently upgraded to the new CS4. The computer that that program is installed on is used to edit 30 and sixty minute television shows. The files start out as .AVI files then, when finished they are rendered and saved as MPG2 files.
We are currently experiencing a problem with this new program that we have not ever experienced in the past. Description of problem:
We import a 30 or 60 minute .avi file into a project. We then place it on the timeline. On these timelines there are only the video layer and the audio layer, no more than that. We then make the editing changes that are necessary. We then go to export the file to the Adobe Encoder to be saved as a MPG2. When we do this, while in the process of encoding the file, Premiere will create four (4) files when it was not told to do so. When this happens of course with a 60 minute file, it can take a very long time to encode, (because it is creating multiple files). We have needed to stop the process, and change the name. This sometimes works, and sometimes it does not.
We are hoping that someone has come across this before and can help us. I have looked at different sources to find the answer to this. I called Adobe direct, and it was suggested that I try this forum. Any help would this would be very appreciated. Thank you.

OK. These are all of the screen shots with the settings. I hope that you can find something.
Thank you

No sound in previously created ".prel" files when I reopen them

If I am creating new file everything works OK. Also if I tried to play the sound track on the previously created prel files the sound is OK

Lio1072
Great job with the troubleshooting the comment in post 1
When you have encountered this no sound after a save close reopen, have you ever tried
a. Moving from one working space to another and making sound changes in the other workspace before going back to the original working space
b. working in the Timeline workspace and moving audio content to other numbered audio tracks?
By narration missing in all of my projects, does that include new as well as existing projects?
In your present situation, please look at deleting the Adobe Premiere Elements Prefs file
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete
the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with Folder Option
Show Hidden Files, Folders, and Drives enabled so that you can see the complete path cited.
Also for troubleshooting purposes now, please consider creating narration in the free audio editor Audacity, exporting the
narration as wav to hard drive and from there import the wav narration file into Premiere Elements with Premiere Elements' Add Media/Files and
Folders. Does that function on Narration Track?
Thanks for the follow ups. Looking forward to learning of your further progress.
ATR

Preview Icons vanishing when dragged into new folder.

When dragging an image file (with a preview icon showing the small representation of that image) is dragged from it's original folder to a new one, the preview disappears and is replaced with a generic "EPS" or "Jpeg" grey icon. Futher, if I get information about the file, the preview picture of the image also shows just a generic file type icon, even though I can see clearly the preview icon. This is so frustrating, as I must then batch process images in photoshop to have a new preview image show up.
To make things even more annoying, the process is inconsistent. If I drag the a eps file from the original folder with the image preview into a new folder, the preview may be missing. If I drag and drag, creating multiple copies of the file in a new folder "hnuewf.eps 1, .2, .3 etc...) almost always one of these attempts will copy correctly, with the preview intact. What the heck is going on!

Partilly solved by rebuilding permissions....

Firefox save image to .txt file when dragging to desktop

Hello,
when dragging an image to desktop firefox not save to .JPG, .GIF or .PNG but creates a .txt file :-/
No probleme with other browsers !
Video demo : http://videobam.com/OTMPC
Any idea ?

Hey SMed79,
Thank you for your question. I understand that you are dragging and dropping an image to the desktop and are seeing a txt file. Try this not in a private window.
Please see the application stored options on your Firefox menu bar to see if there is a preference stored that saves this. I was unable to reproduce this.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Files convert to aif when dragged into logic

whenever i drap an mp3 m4a or anything else for the matter the file gets copied and converted to an AIF fiel within the current project folder
i would like to circumvent this process, is there a way to just let the files sit and play in logic as its original source and not as the newly created aif file?
thanks for the wisdom

in order for logic to play and edit audio it has to be converted to the a raw audio file format liek Aiff/WAV/SDII etc...
Mp3 M4a are compressed audio data and it also is not the optimal quality so u might not wanna vircumvent that feature - also I dont think you can
Should u wanna work directly with compressed audio data I think there are some apps that let u do that - dont ask which ones though:-)

Visual Studio opening files when dragged and dropped in WPF app debugging session

I'm working on a WPF app (using VS2013 CE) which is intended to manage media files (TV Shows, movies, etc) and as part of this I am enabling the user to drag and drop media files on to the running app (by adding AllowDrop="True" and PreviewDragEnter="Window_PreviewDragEnter"
to my Window definition).
The problem I have is that when I drag files onto the app in a debugging session Visual Studio then opens the file(s) when I stop debugging... this is seriously annoying as when I am testing with large media files (> 1GB) it just locks up VS for minutes
at a time while it tries to open the file or files. When I run the app outside the debugger this does not happen - it's only when I'm in a VS debugging session. The only way I can stop this happening is to kill VS completely from Task Manager then restart
it - this is also very annoying but often I need to do this as it will freeze up for 5-10 minutes while it insists on loading the files in VS.
I understand the app, whilst debugging, is running in the context of VS but why does VS then have to try to open the files when debugging is finished? I have looked through the options but can't see anything to switch this off and no amount of searching
has turned up anything - can anyone put me out of my misery with a solution to this annoying issue?

Hello nzmike,
Does Visual Studio behaves like the following image shows and just hangs when opening your media file?
Do you have any other computer which installs Visual Studio? Can you reproduce this on it?
In order to troubleshoot this issue I think we need to locate the root reason of your issue. The problem can related to the following:
1. Your project is corrupt and VS then trys to load that file when debug finished.
2. Your VS is corrupt and caused this problem.
So please do something below:
1. Try clean and rebuild your project.
2. Switch to some other PCs and use VS and your project there, check if the problem can be reproduced.
3. You can backup your VS setting and try some commands: devenv /resetsettings and devenv /resetuserdata
Details about VS command:https://msdn.microsoft.com/en-us/library/xee0c8y7.aspx
And based on th research of the above second step, if you can reproduce this issue on more than one PC, the problem is pending on your project and I need you to share a simple sample which can reproduce this issue. We will need to investigate the project
in detail.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Creating a Linux virtual machine on dynamic vhdx file creates huge file on formating

Hello,
we just created a virtual machine on Windows Server 2012 R2 on a dynamic vhdx file.
When the operating system (Redhat 5) formats the filesystem (100GB of size), then the vhdx file expands to 21 GB, although no data is written to the disk.
Did someone experience a similar issue? And how to avoid such space waste. If we write additional data in the virtual machine, then the vhdx expands again and gets even bigger then the 21 GB.
Thanks,
Thomas

~~
The RedHat 6.5 is not supported guest system,
~
RHEL 6.5 in VM on Hyper-V is even _certified_ solution
~
P.S. About .vhdx itself and BlockSizeBytes 1MB ( 32Mb as default ) see next message
P.P.S.
~ ~
"So RedHat itself supports the virtual machine, but Microsoft not?"
Depends upon how you define the word 'support'. Microsoft has never supported any Linux operating system in the manner that it supports software it has written. In this case, support means providing fixes to the software code. That is pretty
standard across the board. RedHat does not support Microsoft applications or software, either.
However, if you mean the Microsoft supports the running of the RedHat operating system within Hyper-V, the answer is yes. In those cases where it is not obvious that a problem is occurring in Microsoft's integration components, it will work with RedHat
to determine where the error lies. If the cooperative effort between Microsoft and RedHat determines the problem is with Microsoft code, Microsoft will fix (support) it. If it is determined that the problem is not with Microsoft code, RedHat will
make the determination as to whether or not to fix (support) it.
.:|:.:|:. tim
~ ~
https://www.redhat.com/promo/svvp/
==
Red Hat Enterprise Linux and Microsoft Windows Virtualization Interoperability
In February 2009 Red Hat and Microsoft signed reciprocal agreements
to enable cross-certification of the companies' virtualization
platforms. . . . . As a result, customers are able to
deploy heterogeneous virtualization environments comprising Microsoft
Windows and Red Hat Enterprise Linux with full technical support
available from both companies.
The completed certifications include:
Certification of Windows Server 2008 Hyper-V, Microsoft Hyper-V
Server 2008, Windows Server 2008 R2 Hyper-V and Microsoft Hyper-V Server
2008 R2 host with Red Hat Enterprise Linux 5.2, 5.3, and 5.4 guests.
Customers with valid support agreements receive cooperative technical support for:
. . . , and
running Red Hat Enterprise Linux virtualized on Windows Server 2008 Hyper-V.
==
Hyper-V Supported Virtual Machines and Guest Operating Systems
==
Supported guest operating systems
Server guest operating system (Linux) on Hyper-V in Windows Server 2008 R2
Editions
Virtual processors
CentOS 5.5-5.9
x86 edition and x64 edition
1, 2, 3, or 4
CentOS 6.0-6.4
x86 edition and x64 edition
1, 2, 3, or 4
Red Hat Enterprise Linux 5.5-5.8
x86 edition and x64 edition
1, 2, 3, or 4
Red Hat Enterprise Linux 5.9
Red Hat certified.
x86 edition and x64 edition
1, 2, 3, or 4
Red Hat Enterprise Linux 6.0-6.3.
x86 edition and x64 edition
1, 2, 3, or 4
Red Hat Enterprise Linux 6.4
Red Hat certified.
x86 edition and x64 edition
1, 2, 3, or 4
SUSE Linux Enterprise Server 10 with Service Pack 4
x86 edition and x64 edition
1, 2, 3, or 4
SUSE Linux Enterprise Server 11 with Service Pack 1, Service Pack 2 or Service Pack 3
x86 edition and x64 edition
1, 2, 3, or 4
Ubuntu 12.04 and 12.10
x86 edition and x64 edition
1, 2, 3, or 4
Ubuntu 13.04 and 13.10
x86 edition and x64 edition
1, 2, 3, or 4
Oracle Linux 6.4
Note
Oracle Linux is only supported when running the Red Hat Compatible Kernel.
x86 edition and x64 edition
1, 2, 3, or 4
==
+
==
CentOS 5.7 – 5.8
Drivers: IDE, SCSI, and networking
Services: Time synchronization, operating system shutdown, and heartbeat
Integration services are distributed through a download available at
http://www.microsoft.com/en-us/download/details.aspx?id=34603
CentOS 5.9
Drivers: IDE, SCSI, networking, and mouse
Services: Time synchronization, operating system shutdown, and heartbeat
Integration services are built-in and do not require a separate download and installation.
CentOS 6.0 - 6.3
Drivers: IDE, SCSI, networking, and mouse
Services: Time synchronization, operating system shutdown, and heartbeat
Integration services are distributed through a download available at
http://www.microsoft.com/en-us/download/details.aspx?id=34603
CentOS 6.4
Drivers: IDE, SCSI, networking, and mouse
Services: Time synchronization, operating system shutdown, and heartbeat
Integration services are built-in and do not require a separate download and installation.
Red Hat Enterprise Linux 5.7- 5.8
Drivers: IDE, SCSI, and networking
Services: Time synchronization, operating system shutdown, and heartbeat
Integration services are distributed through a download available at
http://www.microsoft.com/en-us/download/details.aspx?id=34603
Red Hat Enterprise Linux 5.9
Red Hat certified
Drivers: IDE, SCSI, networking, and mouse
Services: Time synchronization, operating system shutdown, and heartbeat
Integration services are built-in and do not require a separate download and installation.
Red Hat Enterprise Linux 6.0 – 6.3
Drivers: IDE, SCSI, networking, and mouse
Services: Time synchronization, operating system shutdown, and heartbeat
Integration services are distributed through a download available at
http://www.microsoft.com/en-us/download/details.aspx?id=34603
Red Hat Enterprise Linux 6.4
Red Hat certified
Drivers: IDE, SCSI, networking, and mouse
Services: Time synchronization, operating system shutdown, and heartbeat
Integration services are built-in and do not require a separate download and installation.
SUSE Linux Enterprise Server 11 with Service Pack 2 and Service Pack 3
Drivers: IDE, SCSI, networking, and mouse
Services: Time synchronization, operating system shutdown, and heartbeat
Integration services are built-in and do not require a separate download and installation.
Open SUSE 12.1
Drivers: IDE, SCSI, networking, and mouse
Services: Time synchronization, operating system shutdown, and heartbeat
Integration services are built-in and do not require a separate download and installation.
Ubuntu 12.04 and 12.10
Drivers: IDE, SCSI, networking, and mouse
Services: Time synchronization, operating system shutdown, and heartbeat
Integration services are built-in and do not require a separate download and installation.
Ubuntu 13.04 and 13.10
Drivers: IDE, SCSI, networking, and mouse
Services: Time synchronization, operating system shutdown, and heartbeat
Integration services are built-in and do not require a separate download and installation.
Oracle Linux 6.4
Drivers: IDE, SCSI, networking, and mouse
Services: Time synchronization, operating system shutdown, and heartbeat
Integration services are built-in and do not require a separate download and installation.
Note
Oracle Linux is only supported when running the Red Hat Compatible Kernel.
==

Proxy Icon in TextEdit titlebar created HUGE file when dragged into Finder

Similar Messages

Maybe you are looking for