PROXY_NOT_ALLOWED_ON_IS ( SAP ISR and SAP AII Integration problem )

Hi,
I have facing this problem, during SAP IS retail and SAP AII integration ...
SAP AII and SAP PI in same physical server but different client ..
scenario Detail --
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b3084b-0953-2a10-2993-c0a5fe81d591
server detail ..
I am using standard content for integration .. (
SAP IS retail (client 200. server XYX)
SAP AII ( Client 100 server xxx)
SAP PI (Client 001 server xxx)
Error Detail -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PROXY_NOT_ALLOWED_ON_IS</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Proxy calls are not permitted on sender or receiver side on the IS (client)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please help ....................
Regards,
Amit
Edited by: Amit Shivhare on Apr 7, 2009 11:53 AM

Hi all,
That problem is solved . but new problem come ..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">PARSE_APPLICATION_DATA</SAP:Code>
<SAP:P1>Request Message</SAP:P1>
<SAP:P2>CX_ST_DESERIALIZATION_ERROR</SAP:P2>
<SAP:P3>/1SAI/TXSC93730E87CC1B9E866B5</SAP:P3>
<SAP:P4>XML Bytepos.: 254 XML Path: ns0:BusinessDocumentExecutionRequest(1)BusinessDocument(2)TypeCode(2) Error Text: Data loss occurred when converting Test Kernel ErrorId: CONVT_DATA_LOSS</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during XML => ABAP conversion (Request Message; error ID: CX_ST_DESERIALIZATION_ERROR; (/1SAI/TXSC93730E87CC1B9E866B5 XML Bytepos.: 254 XML Path: ns0:BusinessDocumentExecutionRequest(1)BusinessDocument(2)TypeCode(2) Error Text: Data loss occurred when converting Test Kernel ErrorId: CONVT_DATA_LOSS)) An error occurred when deserializing in the simple transformation program /1SAI/TXSC93730E87CC1B9E866B5 Data loss occurred when converting Test</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards,
Amit

Similar Messages

Right PAAS/Middleware for SAP HCM and SAP Cloud Integration ?

In 2013, SAP has lot of Focus on SAP Cloud and SAP HCM on premises integration elements following the hybrid model, I will like to know the direction from SAP on integration Middleware/PAAS which will reap great returns in terms of TCO to customers over next 4-5 years basis the SAP Integration Road map esp the exposing standard connectors ?
Please do keep in mind the the Middleware/PAAS should be able to support easy integration with Third Party Vendors like ADP/Hewitt etc

The SFAPI and OData API are exposed for any web service integration, including Dell Boomi AtomSphere. The OData API can handle delta changes.
HCI is an evolving platform and offers similar functionality to Boomi in terms of building integrations with a drag-and-drop interface, etc. There is a SuccessFactors connector provided for HCI and the Talent Hybrid integration content is available on HCI as well as PI. The Employee Central integration content currently available on Boomi should be available on HCI hopefully by the end of the year. The Talent Hybrid high-level roadmap can be found here:
SAP HCM and SuccessFactors Integration Packages: an overview
Boomi is included in the Employee Central subscription, but is very expensive to license for other use cases (i.e. Talent Hybrid scenarios). HCI costs 7.5% of the SuccessFactors subscription. PI is free. HCI may be included in the Employee Central subscription at a later date, but this is not definitely going to happen.

What is difference between SAP R3 And SAP IS Mills Product

HI Friends
What is difference between SAP R3 And SAP IS Mills Product
What are the futures are availables in IS MIlls
Regards

Hi,
SAP R/3 is the central enterprise version. It is not specifically designed for any inducstry sectors and it can cater many of the industry types.
Is is developed for specific industries an for SMB's (small and medium business). It will have components specifically for the industry.
The SAP Mill Products component adds sector-specific functionality to an ERP system to satisfy the complex requirements of mill industries (e.g. metal, wood, paper, textiles, construction materials, and cable sectors).
These industry segments differ from others primarily in that the materials used have a large number of characteristics and variants. The materials in the segments listed above are also predominantly area-based (e.g. paper, textiles, plastic film) or length-based (e.g. cables, piping). Account must be taken of these material characteristics throughout the entire supply chain.
To cater for the particularities of these industry segments, SAP Mill Products features processes and functions that cover the entire supply-chain cycle from product design and configuration, through planning, order processing, capacity planning and production, to final delivery. Additional functions are available in costing and inventory management. SAP Mill Products are also integrated into Quality Management, Financial Accounting, and Controlling.
Prase

SAP PLS and SAP QM

Dear sir,
I want to know what is the differance between SAP PLM and SAP QM.
Is there seperate certification course is available.
Regards
Sougata Das

Dear,
SAP Product Lifecycle Management is a complete and vast area in SAP. There are many functionalities covers in PLM. In simple word in whichever functionality directly involves in this process are can be a part of PLM like what you said QM also.
The definition of PLM schould (or could) be:
- Document Management (DMS)
- cFolder and cProject (and PS)
- CAD and Office Document integration
- Task Management, Work Flow, Status Network etc.
PLM can include modules: PS,PM,QM, PP, MM, CS, SD, Document Management etc..
SAP QM is a separate module which you can implement with MM or wherever applicable.
Regards,
Syed Hussain.

Connecting SAP ERP and SAP XI via RFC (in cluster)

Hi all,
I have a strange problem with SAP ERP and SAP XI (production systems). Both systems are installed in cluster. I am trying to connect both systems via RFC, so I configurred TCP connection using SM59. But, when I try to test connection, I am always getting error "Program xxxx is not registered". When I register the program on the sender communication channel on different system (develop system - different machine), connection works fine. Configuration on both SAP XI production and development systems is identical. I just cannot understand, why production SAP ERP does not see registered program on production SAP XI. Has anybody experiences with this? Or any other ideas where should be the problem?

Are you configuring the RFC Sender adapter with load balancing?
what is the hostname you're using for ERP?
Is it the message server's?
Also, make sure the dispatcher is properly configured, sending the requisitions to the application servers.
Regards,
Henrique.

SNC between SAP BO and SAP BW for MS Advanced Analysis

Hy experts, i have configured the SNC between SAP BO and SAP BW but for any user i have this issue:
when the user launch a Bex Query by MS Advanced Analysis, this error message occurs:
No applicable data found.
On the SAP BW system, on ST22 there is this runtime error:
CALL_FUNCTION_SEND_ERROR.
An error occurred when executing a Remote Function Call.
"SNCERR_INVALID_FRAME#A received frame is invalid/truncated or is no SNC-frame"
What happened?
"CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
An error occurred when executing a Remote Function Call.
An error occurred when executing a Remote Function Call.
"CPIC-CALL: 'ThCMSEND' : cmRc=6 thRc=766#General SNC error "
Status of connection.... "CODE=CM_SECURITY_NOT_VALID CM_SEND_RECEIVED
CM_COMPLETE_DATA_RECEIVED SAPCODE=766 CONV=91584639"
Internal error code.... "RFC_IO5"
There is an error in the communication system. To clarify
and resolve the error, contact your system administrator.
Last error logged in SAP kernel
Component............ "SNC (Secure Network Communication)"
Place................ "CPIC (TCP/IP) on host ANDREA_13"
Version.............. 5
Error code........... "-12"
Error text........... "SNCERR_INVALID_FRAME#A received frame is
invalid/truncated or is no SNC-frame"
Description.......... "SncProcessInput"
System call.......... " "
Module............... "sncxx.c"
Line................. " "
The error reported by the operating system is:
Error number..... " "
Error text....... " "
User and Transaction
Client.............. 100
User................ 00000015
Language Key........ "E"
Transaction......... " "
Transactions ID..... "6A3E22E031EEF13395AE0019BBCB620C"
Program............. "SAPLRSBOLAP_BICS_PROVIDER"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 720
Kernel Release...... 720
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. "###"
User................ "############"
Transaction......... " "
Call Program........."C:\Program Files\Microsoft Office\Office1"
Function Module..... "BICS_PROV_GET_INITIAL_STATE"
Call Destination.... "GBP_boe_Default"
Source Server....... "ANDREA_13"
Source IP Address... "10.101.3.80"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPLRSBOLAP_BICS_PROVIDER" - in
"BICS_PROV_GET_INITIAL_STATE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 1
of the (Include) program "LRSBOLAP_BICS_PROVIDERU13".
Could you help me?
Thank's a lot and best regards.
Andrea Maraviglia

Ciao Andrea,
just a couple of hints:
- Did you already tried to skip logon to BOE and instead directly select BW system? this should avoid to involve snc and then BEx query should be accessible. This would be a further confirmation that issue is the SNC, even if the log you posted is pretty clear about that.
- Do you have snc installed even in local PC running MS Advanced Analysis? I Think it is necessary for the described workflow (page 24 of Admin Guide):
"With SAP BusinessObjects Enterprise as the BI platform, single sign-on works if the following conditions
are true:
u2022 BusinessObjects Enterprise XI 3.1 is configured correctly for single sign-on. For more information,
see u201CConfiguring SAP authenticationu201D in the Integration for SAP Solutions Install and Admin Guide
at http://service.sap.com/bosap-instguides SAP BusinessObjects Business Intelligence (BI) >
Integration for SAP Solutions > XI 3.1.
u2022 Secure Network Communications (SNC) is installed on each client PC. For more information, see
SAP Help Portal at http://help.sap.com SAP NetWeaver > SAP NetWeaver Library > SAP
NetWeaver by Key Capability > Security > Network and Transport Layer Security > Secure
Network Communications.
u2022 Each end user has a user account in the connected BW system."
Furthermore, if I rember correctly, there could be restriction in license using SAP Cryptographic Library (client connection is not supported: SAP notes 597059 and 397195), so you should check your SNC software.
Hope it could hep.
Regards.
Roberto.

How to integrate sap bw and sap pi system

Hi all,
I am doing interface to integrate SAP BW and SAP PI syetms .here i want to send data from SAP BW infocube to pi after that i need to send the data sap apo system.sap bw and sap pi intergration part is pending so how integrate these two systems and how to send data from infocube i am not clear abt process.i came to know tht do with proxy.but process i dont know clearly.
Can anyone tell me the process to integration process and any outbound sap bw to pi scenario blogs are information is very helpful.
Thanks
SG

>> Can anyone tell me the process to integration process and any outbound sap bw to pi scenario blogs are information is very helpful
Basically you need to use client proxy.
A) Create data type , mesg typ, service inteface, message mapping and interface mapping as usual in ESR
B) In Integration Directory, YOu dont need sender communication channel and sender agreement. Because you are using client proxy. rest are all same
C) You need to do proxy configuration between SAP BW and PI to establish connection
Note: PI to sap apo system communication is already known. Then in PI target message follow that system structure in ESB and use the supported adapter for that system in Integration Directory.
Hope this helps

Differnce between SAP-XI and SAP PI

hi can any body tell me what is the differnce between SAP-XI and SAP-PI

Hi vijay,
u can get lot of information regarding PI and XI in sdn.There already exists a no. of thread.just search with keyword "XI 3.0 and PI 7.0" u can get a lot.
XI 3.0
1. J2Se adapter engine was replaced with J2EE Adapter Engine.
2. BPM was available from XI 3.0
3. Part of Netweaver 2004
PI 7.0
1XI renames as Process Integration
2.. Part of Netweaver 2004s.
3. Has all features of XI 3.0 and every SP of Pi 7.0 has a corresponding release for XI 3.0.
4. Runs on WAS 7.0 and has same features as XI 3,0
From functional point, there is no difference between XI3.0 and PI7.0. There are changes only wrt SP. For every SP release on PI7.0 a corresponding SP for XI3.0 is also released.
A comparision of the service packs in 2004 and 2004s;
in 2004 - in 2004s
SP12 & < - SP04
SP13 + 14 - SP05
SP15 - SP06
SP16 - SP07
SP17 - SP08
SP18 - SP09
For release notes
ref:http://help.sap.com/saphelp_nw04/helpdata/en/cf/9844428e9cbe30e10000000a155106/frameset.htm
There is no f'nal difference between XI 3.0 and PI 7.0. In order to bring all netweaver releases on par with each other , SAP released / renamed XI as PI and it is a part of NW04s
For every release of PI 7.0, there is a parallel Support Pack on XI.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf">SAP NetWeaver Process Integration 7.1 Overview of New Capabilities</a>
Also check these threads.
Difference between NetWeaver 2004 and NetWeaver 7.0 or 7.1
All the diff between XI 3.0 and PI 7.0
differences between xi 3.0 and pi 7.0
Difference/ changes from XI 3.0 to PI 7.0
regards
Bill

SAP hostagent and SAP netweaver nodes not visible in WIEM

Hi,
We are implementing SAP BusinessObjects performance monitoring through
RSC. RSC SP3
We have installed SMD Agent on BOE server which forms "Managed Agent".
We have utilising existing WIEM installed in SOlution Manager.
We have installed SMD Agent on client desktop whicn forms "Managing
Agent" since Solution Manager does not have connectivity to internet
even through proxy server.
We have run configuration UI for Managing Agent which completed
successfully.
The configuration setup of Managed Agent also completed successfully.
But, as informed in the installation guide the "SAP HostAgent" and "SAP
NetWeaver" processes & nodes are not created in WIEM.\ check configuration 6.3.3 in RSC SP3 guide/
We checked connectivity & port settings and we have no issues.
Kindly suggest
Regards,
Atul

Hi Atul,
I see where the problem is coming from by analyzing the debugging logs.
When you ran the RSCSetup.bat and you were prompted for the Wily Introscope Enterprise Manager connection details and you put in:
HOSTNAME: CPHSMAD1
PORT: 8081
This is incorrect. That port number is the HTTP port of Wily Introscope, not the WIEM port. You must use the WIEM port which by default is port 6001 (this port will be the same as when you log on to WIEM via the Wily Introscope Investigator client)
Please do the following to correct the problem:
1) On the managed host (CPWBOAD1) run the RSCSETUP.BAT again. Choose deactivate and allow the process to finish.
2) On the managed host, uninstall the SMDAgent (with SID PRD) by running sapinst again and choose "uninstall"
3) On the managed host reinstall the SMDAgent (RSC Diagnostic Agent) again.
4) Confirm the new SMDAgent (PRD) service is running. If it isnt, start it.
5) On the managed host, run the RSCSETUP.bat again and make sure to choose the correct "Wily Introscope Enterprise Manager" port and host name (for example, CPHSMAD1 and 6001)
6) Now on the managing host, run the RSC UI Configuration Wizard again. The SMDAgent should appear now.
Best Regards,
Toby

Must all SAP MSS, SAP ESS and SAP PCUI_GP be of the same SP level?

Hello,
in order to fix an error in XSS we need to upgrade SAP PCUI_GP to SP 10. Is it therefore necessary to upgrade also the rest of the components building XSS (SAP MSS and SAP ESS) also to SP 10 or can they stay on SP 9 as they are now? Is there an official SAP document answering my question?
Regards,
Adam

adam,
the MSS and ESS should work independently, but both require PCUI_GP as a base-component, so these versions should be equal.
you can try to use different SP-levels, but this is not supported & what's the problem to keep them on the same level?
depending on the changes on each SP-level (e.g. if there are only country-specific changes for countries you don't need or text-corrections, check the notes for the SP-levels) you can risk it...
kr, achim

Where do i find daily posted question on sap abap and sap webdynpro abap

Hi
where do we find Daily posted questions on sap abap and sap webdynpro abap in scn sap so that i can go through the questions and answer them .

Hi,
Go to the Content tab of any space and click on discussions. Then you can sort them by date created or any other
For ex: This link for WDA discussions: - Web Dynpro ABAP
You can also click on Receive email notifications for any space to get updates on that space.
hope this helps,
Regards,
Kiran

How to configure for GPlus Adapter with SAP Phone and SAP CRM

Hi All Basis Adm,
Please consider as an urgent basis i need the information that how to configure GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1). If u have any document regarding mentioned above than that will be acceptable.
Regds,
Govinda

Hi Prasad,
In you case, it's a file to file scenario.
Go thro' this link for a solution:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards.
Praveen

SAP IBP and SAP S&OP on HANA

I am trying to understand the relationship between SAP S&OP on HANA and SAP IBP.
I see the latest version of S&OP on HANA is 3.0 SP02. Is this actually the 'S&OP' part of the IBP 4.0 application suite, or does IBP 4.0 have a specific, different, S&OP component?
Thanks for any advice on this...

IBP for S&OP is the next version of SAP S&OP on HANA.
It is similar to our SAP APO and SAP SCM name change of next versions.
IBP is a Suite and IBP for S&OP is one of the component. You can subsribe along with IBP's other components or Stand alone.

SAP PA and SAP II Product Road Map

Hello everyone,
where can I find the latest SAP PA and SAP II product road map, based on the version SAP PA 1.17?
The latest official product road map I found is from Dec. 2013.
Thanks in advance,
BJE

Hello,
The combined roadmap for II and PA is in its final elaboration phase.
We will published it once approved.
Regards,
Didier

Course material for SAP TERP10 and SAP FICO

please provide some study material and some guidance for certification exam of SAP TERP10 and SAP FICO as i am planning to sit for my certification exams

Hello there!
I found a cool website, that specialized in FICO:
http://fico-forum.de/zertifizierung/zertifizierung.php
if you cant read in German, I can advice you to use Google Translator

PROXY_NOT_ALLOWED_ON_IS ( SAP ISR and SAP AII Integration problem )

Similar Messages

Maybe you are looking for