Proxy Runtime for Business System not visible in RWB.

Hi,
We are running SAP PI 7.10 SP7.
The current landscape contains currently 2 SAP R/3 application systems and 1 SAP PI systerm that are all registered with the SAP PI SLD.
There is Business Systems configure for both the Application systems in the SLD from the registration.
In the ID it was possible to import these Bussiness systems and to use them in scenarios. It is even posible to post messages to both IE on these Business Systems. If tcode SPROXY is executed on both these business systems then it connects to the same ESR. On both business systems I have created a "PIRWBUSER" with the same password and roles as on SAP PI.
Now my ploblem is that I only see one proxy runtime in the RWB under Integration Engines.
Please can you assist in this matter?
Regards
Willie Hugo

Hi,
The problem is solved with patches to the following JAVA components.
MESSAGING 7.19
SAP_XIAF7.17
SAP_XITOOL7.14
Regards
Willie Hugo

Similar Messages

Transport target for business system not found in System Landscape Director

Folks,
We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
We are getting following error when we try to import an interfaces in to new PID system:
Import failed because of business system transfer object
Communication component XID_FileSystem: Obligatory
transport target for business system XID_FileSystem not found in
System Landscape Directory
We are yet to install PIQ system.
All the interfaces in the old XID system have transport target of XIQ system. I removed the transport taget for the interface, but transport target is still showing in the Business system under transport target head.
How can we overcome this issue as we will not have PIQ system atleast for two weeks.
Thanks in advance,
Regards
Chandu

Hi,
You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
Illustrated with DEv & PRD here.
Procedure:
1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
2) Call SLD (System Landscape Directory) Component from the Integration builder
Save all the Following .zip files on the Local Desktop
3) Select the Software Component & say Export that you want to Export from DEV
Server to Production server and which is going to use in the IR of XI
4) Also Select the Product of the above SWC and say Export
5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
6) Select the Business System(s) & say Export; those are associated with above Exported
Technical systems.
In Production Server
1) Logon to the SLD of the Production Server.
2) Create a Technical System and Business system which points to the Production SAP R/3
3) Go to Administration TAB in the main page of SLD
4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
5) Click on Browse and select the .zip files that is to Import into Production Server,
Which were stored on the local desktop at the time of DEV Server Export
And say Import Selected File Option
By this we exported and imported the SLD Objects
Now we have to create transport groups and transport targets in the Production server of SLD
Creation of Transport Groups
Edit GroupsGroup1) Select the Business systems
2) Click on New Group and give the name of the group as DEV_group & select the
Corresponding Development serveru2019s integration Server
3) Similar way create another group for Production serveru2019s business system as
PRD_group and select the Production serveru2019s integration Server
Creation of transport targets
This is to Define which business systems in two different groups correspond to each other
1) Select each Business system in the SLD and select transport TAB---click on
Add/Change Target and select its corresponding target business system.
For Example:
If you select the business system of Production XI server means
In the target you have to select group as DEVGROUP and the business system of Development XI server.
Like this do the same for other business systems also
Ex:
BS_PRD_Integration Server----
BS_DEV_Inetration Server
How to create Transport Groups & transport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards
Seshagiri

DEV- QAS : Obligatory transport target for business system not found

Hi guys!
I have read all the other threads about this subject, but since I still have no success, I´m feeling obligated to ask you for a help (deadline approaching fast!)
I´m trying to transport a Communication Channel, from DEV environment to QAS. I'm having the 'usual' error:
Import failed because of business system transfer of object Communication Channel * | SIGA | SOAP_SYNC_SENDER: Obligatory transport target for business system SIGA not found in System Landscape Directory
Here were my steps:
Keep in mind that in DEV, everything was up and running: Software Component, Product, Technical System and Business System for this name "SIGA".
1 - In DEV, I created a new Technical System, named "SIGA_QAS", pointing to my QAS server. (Keeping in mind I already had a "SIGA" pointing to my DEV server.)
2 - Still in DEV, I did create two groups: GROUP_DEV and GROUP_QAS, one points to INTEGRATION_SERVER_DX1 (DEV) and the other INTEGRATION_SERVER_QX1 (QAS).
3 - Still in DEV, I created the Business System called "SIGA_QAS" also, pointing to my QAS server.
4 - Still in DEV, I went inside both Business Systems and put: "SIGA_QAS" as TARGET BS of "SIGA" (which automatically puts "SIGA" as SOURCE BS of "SIGA_QAS")
If I look at my QAS SLD, I can see all of these objects already there, since my BASIS team did activate the 'sync' between these two environments. So, I dont need to create anything 'new' in my QAS SLD, all the objects are there, same as DEV SLD.
If I try to EXPORT/IMPORT a simple Communication Channel (using file system or even CTS - I tried both) I get the error mentioned above.
But this is 'wierd' for me, since the error says: "business system SIGA not found in System Landscape Directory", but it is there, in both SLDs.
Am I missing something here?
Thanks!
Ricardo Sancio Lóra
Brazil

Hi,
If you not tried this then try it. Delete the Business System SIGA from Integration Directory in your QAS system and then again import the business system from SLD. Acitvate the changes and then import the CC from Dev to QAS.
Regards,
Sarvesh

Obligatorytransport target for business system not found in SLD

Dears,
We implemented CTS+ in our PI three system landscape.
While implementation we configured local SLD and after that for dev and QAs we configured a central SLD.
And for Production we have seprate SLD.
In DEV SLD we have three buisness systems:
File_Dummy of type DEv
File_Dummy_Q of type QAS
File_Dummy_P of type PRD
Now in transport target group of File_Dummy I put File_Dummy_Q and in File_Dummy_Q I put File_Dummy_P but for BS File_Dummy_P target group is empty.
Now I put all these BS into a request and import them in QAS then I get error:
Obligatorytransport target for business system File_Dummy_P not found in System Landscape Directory
Now I am not getting what to put in transport target of File_Dummy_P as it is of type.
I tried to put their File_Dummy_P but we can not put PRD type BS there.
I also tried with dev and qas BS there but still same error.
Please suggest how to resolve this error.
Regards,
Shivam

Hi,
did you transported the associated technical systems of your business systems....?
Also I assume you have assoicated the targets foryour business systems in SDL..
like for D targets are Q and P
for Q source is D and Target is P
for P sources are D and Q... if not assoicate the same...
and also make sure the three groups are available for three environments...
HTH
Rajesh

My business system not visible

Hi all,
I created one business system using 3rd pary when I
am going to assign in "Integration Directory" it is not
coming in list. Then when I am trying to create the BS
in SLD with same name and Logical system then it is
showing "Already exits". But in SLD also not
visible...??? What will be reason. How to get my BS in
ID?
regards,
Khaja.

Hi,
It is not added in any other scenarios. When I done "Cache Notification" then I am getting this Error
"com.sap.aii.ib.server.abapcache.CacheRefreshException:
Unable to find an associated SLD element (source
element: SAP_XIIntegrationServer, [CreationClassName,
SAP_XIIntegrationServer, string, Name, is.01.apollo,
string], target element type: SAP_BusinessSystem)
Regards,
Khaja.

Skype for Business users not visible under "Online...

Hello,
It seems as if Skype for Business contacts do not appear in the "Online" contact list (see screenshot below), whether they are Online, Away, or Busy. If I switch to "All" contact list, the Skype for Business contacts immediatelly show up.
A workaround is to leave the "All" contact list, and hide offline contacts through Contacts -> Hide Contacts Who -> Are Offline.
While this workaround is good, I think it is much easier to use the contact list dropdown, than to go through the menu to view all contacts.
Has anybody experienced this same issue?
Thanks.
Solved!
Go to Solution.
Attachments:
Untitled.png ‏38 KB

I too have the similar problem, but with normal non-business client:
http://community.skype.com/t5/Windows-desktop-client/quot-Online-quot-Contact-List/td-p/3973422

Obligatory transport target for business system SAPR3D not found in System

HI All ,
We have installed New PI 7.1 system and stared migrating the interfaces from XI 3.0 to PI 7.1 . in Devlopement system .
IR object have been successfully deployed but while delopying ID objects got the following error . Obligatory transport target for business system SAPR3D not found in System Landscape Directory.
When I checked with business system transport target was not defined ., Please suggest how to go ahead further .
Thanks ,
Prakash

Hi Ravi,
Please go through below disucssion it is on the same line of your question.
Transport target for business system not found in System Landscape Director

Role for business system defined in SXMS_CONF_ITEMS'

hi
in RWB integration engine status is red in detail it is showing.
'No role for business system defined in SXMS_CONF_ITEMS'.
how can i fix this.
regards,
krushi

HI
Runtime Workbench - Integration Engine
Are the Roles in SXMS_CONF_ITEMS and the SLD Consistent?
//***The role of a business system is defined centrally in the SLD. However, you can overwrite this setting locally in the table SXMS_CONF_ITEMS.
This test checks whether the role descriptions are consistent. If not, the locally defined role is used at runtime.
extract taken from this thread
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/1b5342d8a7be30e10000000a155106/frameset.htm
Message was edited by:
Anusha Ramsiva

No role for business system defined in SXMS_CONF_ITEMS

Hi Experts.
I have the following problem. We were set up the XI in our company and now we are trying to configure and run it propertly. We had some problems so far and now there is the next one: I configured the simple scenario FILE-XI-FILE but it doesn't work :(. Every step from the scenario was completed successfully (after some problems) but when I have started runtime Workbench (RWB) in order to monitor the functionality of XI and I choosed Component Monitoring | Components | Integration Server | Integration Engine GPI I see that I have an error in Self-Test Status | Are roles in SXML_CONF_ITEMS and SLD consistent? In detail it's No role for business system defined in SXMS_CONF_ITEMS. My business and technical systems look to be well configured but now I'm hopeless because I can't find nothing more specific about SXMS_CONF_ITEMS table. I tried some notes and threads from the forum but nothing helped me after all. So please help if someone has an experience with something similar. Any help will be appreciated. Thanks
Ondrej

Hi,
The role of a business system is defined centrally in the SLD. However, you can overwrite this setting locally in the table SXMS_CONF_ITEMS.
This test checks whether the role descriptions are consistent. If not, the locally defined role is used at runtime.
Check in transaction SXMB_ADM -> integration engine configuration a parameter (Corresponding Integ. Server) if all parameters are correct n not lost.
refer : http://help.sap.com/saphelp_nw04/helpdata/en/a5/1b5342d8a7be30e10000000a155106/content.htm
Runtime Workbench - Integration Engine
http://help.sap.com/saphelp_nw04s/helpdata/en/70/58b43be7492354e10000000a114084/frameset.htm
Regards
Aashish Sinha
PS : reward points if helpful

SPROXSET ...Unable to rectify Business systems not found issue..

Hi,
On doing a test of my proxy I am frustrated with an error " Business system not found". I have maintained SPROXSET values as IFR_aDDRESS = XI.XYZ.COM, IFR_PORT = 51000, IFR_USER = PIAPPLUSER and IFR_PASSWORD = XIPASS.
I encounter this error whenever I do a test on SPROXY and I can't see the business systems from the SLD. What am I missing here? My sldcheck , sldapicust are all good. The only error in sldcheck is LCR_SAP_BUSINESS_SYSTEMS gives a retuen code fo 4. Please advise on what I am missing here.
Teresa

Check RFC destination
The below links may be useful
How do you activate ABAP Proxies?
How do you activate ABAP Proxies? - Activate Proxy
ABAP Server Proxies - ABAP Server Proxy
ABAP Proxies in XI(Client Proxy) - ABAP Client Proxy
BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
File to R/3 via ABAP Proxy - ABAP Proxy
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm

Business system not found in CPACache

Sceinario was working fine before XI system crash. After the system is reestablished the scenario not working. Giving RFC error "Service: SAPESRI not found in CPACache" in R3 system
CPAcache refreshed for dela as well as full
Adapter specific identifiers are fine
SLD cache cleared in IR ID
Business System name is found in CPAcache
error repeated
Business System deleted from SLD. New business system Created. Entire scenario reconstructed. All the above are also fine.
Still error is repeating.
Can anybody give a solution for this problem please?
Regards,
Venkat

Hi Venkat,
The subject of the problem & the problem explanation is varing i.e *Business system not found in CPACache*
However, the problem still lieing with SLD. So, test the SLD and activate the scenario. Also without refreshing CPA cache you will have to perform execution.
Regards
Pothana

Obligatory transport target for business system BS_DEV in SLD

Hi all,
 We are moving receiver detrmination from QA to PRD, there we are getting one error
"com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
>>>rt failed because of business system transfer of object Receiver Determination BS_DEV
>>> * *: Obligatory transport target for business system BS_DEV not found in Sys
>>>tem Landscape Directory caused by: com.sap.aii.ib.core.transport.api.PostprocessingException: Import
>>>failed because of business system transfer of object Receiver Determination BS_DEV
*: Obligatory transport target for business system BS_DEV not found in Syste
>>>m Landscape Directory caused by: com.sap.aii.util.hmi.api.HmiMethodFault: caused by: ClientServerEx
>>>ception exception:Import failed because of business system transfer of object Receiver Determination
>>> BS_DEV * *:Obligatory transport target for business system WP
>>>C_Dev not found in System Landscape Directory caused by: com.sap.aii.ib.core.transport.api.Postproce
>>>ssingException: Import failed because of businesssystem transfer of object Receiver Determination
>>> BS_DEV * *: Obligatory transport target for business system BS_
>>>DEV not found in System Landscape Directory"
I am moving the same object from development to production, i feels ther is some problem in setting transport target.
BS_DEV target system is BS_QA, in development sld
BS_QA source system is BS_DEV anf target system Is BS_PRD in Quality sld
BS_PRD source system is BS_QA, in production.
The above error occurs when we are moving same object which i moved from development to quality to production.
whether i need to take obejct from quality and need to move that one to production, or i can use the same development object to production...?
Regards
Pradeep P N

Hi,
Even I am facing the same problem.
we have given the Transports Target as mentioned, but still facing the same error:
Deployment
Transport request : DPIK900141
System : QPI
tp path : tp
Version and release: 375.30.25 710
CTS Deploy Service - Version 0.92 06.03.2007
========================================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL = http://sqnpi1.sap.sgroupit:51600
Double-stack system QPI
Deploy for XID
Deploy File = 2f8021d0f9ca11dea81e001a64925608
Start of Web service log
Deploy Service called with following parameters:
CommunicationData-Type:1
CommunicationData-Address:http://sqnpi1.sap.spoolzgroupit:51600/dir
CommunicationData-Host:sqnpi1.sap.sgroupit
CommunicationData-Port:51600
CommunicationData-User:'filled'
CommunicationData-Password:'filled'
Deployable(0)
Deployable-Type:1
Deployable-Id:/usr/sap/trans/data/DPIK900041/2f8021d0f9ca11dea81e001a64925608
com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
>>>rt failed because of business system transfer of object Receiver Determination DPI SI_POS_CH_SN
Returncode:'8'
Deployment
End date and time : 20100105151741
Ended with return code: ===> 8 <===
Can anyone guide to solve it.

Transport Error while transporting ID TR (Target Business System not found)

Hi Gurus,
We are facing a issue with transports while transporting a ID transport to Prod from QA.(We are using CTS+)
Its our first transport to PROD and we have checked the configuration for BC Application Server in Administration ->Content Maintenance and all looks good .
Our SLD is looks as below
We have shared SLD for Dev and QA and it looks as below
Dev's BS has target business system of QA BS
And in Prod Sld looks like as below
QA's BS has target business system of Prod BS
When we transport from Dev To QA transport works fine but when we transport from QA to Prod its gives below error and in error its points that target for Dev business system is not found in Target SLD.
We thought we should try to point Dev BS ====>>Prod BS may be that might work work but its also giving error same error.
Below mentioned is the Error
class java.rmi.RemoteException:
ClientServerException exception:Import failed because of business system transfer of object Service BS_ACN_MDH_DEV:Obligatory transport target for business system BS_ACN_MDH_DEV not found in System Landscape Directory
com.sap.aii.ib.core.transport.api.TransportCsException: Import failed because of business systemtransfer of object Service BS_ACN_MDH_DEV: Obligatory transport target for business system BS_ACN_MDH_DEV not found in System Landscape Directory
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.TransportPostprocessor.postprocessTransport(TransportPostprocessor.java:741)
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.DirImportPostprocessor.postprocess30Import(DirImportPostprocessor.java:62)
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.InternalPostprocessingService.postprocess(InternalPostprocessingService.java:205)
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.PostprocessingService.doPostprocessing(PostprocessingService.java:171)
#at com.sap.aii.ibdir.server.pvcadapt.XIDirPropagationProvider.transportFinished(XIDirPropagationProvider.java:90)
#at com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcImport(PvcTransport.java:107)
#atcom.sap.aii.ibdir.server.transport.impl.pvc.DirPvcTransport.pvcImport(DirPvcTransport.java:74)
#atcom.sap.aii.ibdir.server.transport.impl.service.InternalDirTransportServiceImpl.pvcImport(InternalDirTransportServiceImpl.java:142)
#at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:721)
#at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importXiStream(InternalTransportServiceImpl.java:500)
#at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importXiStream(TransportServiceImpl.java:265)
#at com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(CmsHmiMethods.java:306)
#at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
#atcom.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
#at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
#at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl1_0.process(HmisLocalLocalObjectImpl1_0.java:144)
#at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:290)
#at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
#at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
#at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
Can you guys please help out in resolving this error.
Thanks in Advance.

Hi,
I assume you have two SLDs(SLD1 - for Dev and QA , SLD2 - for Prod) and PI 7.0 or XI 3.0.
In this case the ideal solution would be to
1. set up a SLD bridge between your Dev/QA SLD and Prod SLD. The bridge basically forwards all the Technical system SLD info to Prod. SLD.
2. Import Dev business systems information into Prod.
3. Then create transport target,
Make sure that you have created Business Groups for Dev/QA/Prod properly
Edited by: Nageshwar Reddy on Mar 17, 2009 8:29 AM

Malware? Firefox downloaded "new version 33.02" on my system- not visible afterwards on "about firefox"

Malware? Firefox downloaded "new version 33.02" on my system- not visible afterwards on "about firefox"

The current latest version is 33.1. Please get the newest and latest version at getfirefox.com if this 33.1 is not listed as your current version.

Message processing not visible in RWB Message monitoring

Hi Experts,
There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
Messages are visible in RWB Message monitoring.
Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
Thanks in Advacne,
Seshu.K

There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

Proxy Runtime for Business System not visible in RWB.

Similar Messages

Maybe you are looking for