Proxy settings in NWDS 7.1 EHP1 for accessing ES workplace

hi
I have done the service registry settings in NWDS to access the ES workplace.  i have selected the option "direct connection to internet" in the general-> network connections settings.when i am working from my home this is working fine. but the same thing when i do in my company it is not working. .so how do i find out the correct proxy settings to enter, in order to access in from my company intranet. i tried putting the proxy setting mentioned in the blog ( blog of rudolf held on " How to Consume an Enterprise Service from the ES Workplace in Web Dynpro in the new SAP NetWeaver Composition Environment 7.1". )but it did not work. any suggestions?
thanks
sankar

Hi Ronniee,
I m trying to implement RFC lookup functionality in Adapter Module.
Hence I have exposed RFC as a webservice. I have a WSDL now
In older version of NWDS (7.0), we used to create deployable proxy project in web service perspective, refer below link
http://help.sap.com/saphelp_nw04/helpdata/en/2d/b9766df88f4a24967dae38cb672fe1/content.htm
But now I m supposed to implement similar functionality using NWDS 7.1. But unable to understand how to consume web service
Any input?
Thanks
Mugdha Kulkarni

Similar Messages

  • How to change proxy settings on my firefox 4 beta for android

    I cannot see any proxy settings button in preferences section

    To set a proxy server in Firefox 4 beta for Android:
    # Type "about:config" in the address bar and press return.
    # Type "proxy.http" into the search box on the about:config page.
    # Tap on "network.proxy.http" and type the server name into the text box.
    # Tap on "network.proxy.http_port" and type the port number into the number box.

  • Playbook - ActiveX control for accessing MS Workplace

    Hi, I am new to BB forums, so please excuse my lack of knowledge on how this works.
    I am trying to log on to my work computer using Remote Web Workplace, and it requires ActiveX Control.
    Is there a way to install this on the Playbook?
    I appreciate any and all help
    Thanks
    Troy

    ActiveX is a Microsoft technology that would not be supported in a QNX (unix) operating system. The browser would have to support this and I will guess that will probably not happen anytime soon.
    o2 interactive | FaceBook | Blog | Twitter

  • Code developed in NWDS 7.1 CE7.1 not working in NWDS 7.1 EHP1

    Hi,
    The code developed using NWDS CE7.1  is working fine at runtime and then migrated to NWDS 7.1 EHP1 for a new requirement.The same code in NWDS 7.1 EHP1 is not working at runtime . The problem is with one of the columns in a table.This column is binded to a value attribute in NWDS CE7.1 whereas in NWDS 7.1 EHP1, this "value attribute" is now just an"attribute".
    The column is no longer displaying the right value at runtime when deploying the code from NWDS 7.1 EHP1.
    Please help.
    Regards,
    Reinuka.

    Hi Satish,
    Thanks for the reply.
    Yes, the attribute's dataype is not effective at runtime.I had created a custom date datatype for this attribute and assigned a format"dd-MMM-yy HH.mm.ss"  which is coming fine when the track has 7.10 sap dependencies but not when using a new track having same SCA file with 7.11 sap dependencies.I found it's not a problem with NWDS but when we with the version of the SAP dependencies added to the NWDI track.Kindly suggest.
    Regards,
    Reinuka Paul.

  • What is the keyboard short cut to switch from proxy settings to none

    I have a website that requires specific SSL settings and i changed my proxy settings to go there.
    But for the rest of my browsing i don't use a proxy.
    How do i toggle between without going through Preference Settings? Is there a keyboard shortcut?
    thanks!

    *FoxyProxy Standard: https://addons.mozilla.org/firefox/addon/foxyproxy-standard/
    *AutoProxy: https://addons.mozilla.org/firefox/addon/autoproxy/
    *QuickProxy: https://addons.mozilla.org/firefox/addon/1557

  • How to get the GP Denpedencies(API) for NWDS CE7.1 EHP1

    Hi Frndz...
    I have 3 Qun's..
    1) How to get GP API in EHP1 NWDS7.1 in NWDS 7.0 we can get by D/L gp_api_nw04s.zip,gp_TopLevelDCs.zip and xtracting these to
    Location to Extract gp_api_nw04s.zip=>
    C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\DCs\sap.com\caf\eu\gp
    Location to Extract gp_TopLevelDcs.zip=>
    C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\SCs\sap.com\CAF\_comp\TopLevelDCs
    i done the same thing like above for NWDS 7.1(EHP1) but am not getting the GP Dependcies for development.How can i resolve this.
    2) When am deploying the app with CE7.1(EHP1) app is deploying well but when output coming on browser its giving error , n i changed the browser settings in NWDS to all options but no use.
    3)Am doing CO in which i have two action buttons(result states)for this am going like this
    In getDescription()
    IGPCOResultStateInfo success = technicalDescription.addResultState("Success");
    success.setDescriptionKey("Success_desc");
    IGPCOResultStateInfo reject = technicalDescription.addResultState("Reject ");
    reject .setDescriptionKey("Success_desc");
    In complete()
    executionContext.setResultState("Success");
    executionContext.setResultState("Reject");
    executionContext.processingComplete();
    but after creating the action-->CO am finding only Success Result State only(no Reject Result State), anybody tell me what wrong am doing.
    In my case i have to Result states Accept n Deny , if Approver1 clicks on Accept button flow has goes to Approver2 if not it should goto initiator how zit ??.If anybody have idea plz share with me .

    not answered

  • Creating deployable proxy in NWDS 7.1 EHP1

    Hello all,
    As mentioned in the link
    http://help.sap.com/saphelp_nw70/helpdata/EN/2d/b9766df88f4a24967dae38cb672fe1/frameset.htm but in the link its for older version of NWDS
    How to create deployable proxy in NWDS 7.1 EHP1
    Regards,
    Ronniee

    Hi Ronniee,
    I m trying to implement RFC lookup functionality in Adapter Module.
    Hence I have exposed RFC as a webservice. I have a WSDL now
    In older version of NWDS (7.0), we used to create deployable proxy project in web service perspective, refer below link
    http://help.sap.com/saphelp_nw04/helpdata/en/2d/b9766df88f4a24967dae38cb672fe1/content.htm
    But now I m supposed to implement similar functionality using NWDS 7.1. But unable to understand how to consume web service
    Any input?
    Thanks
    Mugdha Kulkarni

  • How can I have proxy settings stay for multiple users on an educational network?

    Hi,
    I want to be able to have mutlple users log onto machines and haave proxy settings already set in preferences. I have tried by copying the Mozilla folder in to the All users location and does not help.
    Each user logs onto a computer with a mandatory or Roaming account depending on account security. Settings for firefox are picked up from their Documents and settings folder when they log on (It is created when they log on for the first time)
    Is there a way to pull across proxy settings for a new user? Ussually it would be a case of just sticking it in All Users.
    Thanks

    A possibility is to create a file user.js and place that file in the default template location (defaults\pref) in the Firefox program folder.
    If you don't want users to change the proxy (connection) settings then you can also lock the prefs or set a different default value.
    See http://kb.mozillazine.org/Locking_preferences
    You can use these calls in mozilla.cfg to set or lock a pref:
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes
    lockPref(); // lock pref, disallow changes
    http://kb.mozillazine.org/network.proxy.type
    http://kb.mozillazine.org/network.proxy.%28protocol%29
    http://kb.mozillazine.org/network.proxy.%28protocol%29_port

  • How to use proxy settings for one website

    Hello,
    I have to access the only one website using Proxy settings and for others I don't need proxy to access. Is there a way to configure the internet settings to allow one website using Proxy... Please advise. Thanks!
    Regards,
    Aravin S

    I am also getting this "error".  The printer (8500 A910) connected to the web well enough that it went out and supposedly downloaded a new update, but then it was supposed to print a page showing the email address, but did not.
    So I go in and try to set up the eprint, and it tells me it cannot connect to the sever and I'll need to enter a proxy address and port number.  But my ISP's cable modems do NOT have any static IP address nor do they provide any sort of proxy service.  Everything works just fine with "automatic discovery" (DHCP) for every computer in the house.  No problems there.
    So, since  that's the case, of course I cannot look up some proxy address and port number in my web browser because they're all set up for "automatically detect settings".
    What's baffling is that the printer connected to something at HP to download the "update", and it went through a process that appeared to be what I'd expect it to do if it was updating its firmware.  But it won't connect to whatever it's supposed to connect to to have an email address assigned.
    Does HP supply a proxy server?  If so, what's its IP address or URL, and what port should a person set the printer to try to use?
    UPDATE:
    It appears that the HP site must have just been "down" for about six or seven hours while I was trying to get the printer to connect because it now connected and I got an email address asigned without needing to have any "proxy" stuff set up at all.  It's a shame that the printer does not simply report "HP Site down - try again later" instead of reporting that you need to use a proxy when that's impossible.
    "Now, on to the next problem which is that my emails to the assigned address are all bouncing with a "550 5.7.1 Command rejected" error!

  • Steps to apply Proxy settings for all Server in a specific OU using Group Policy ?

    People,
    I have several terminal server (2008 R2) running as RDSH in an OU called Terminal Servers.
    So how can I create the GPO setting to make sure that everyone who login to this terminal server will be getting the proxy settings automatically to proxy.domain.com on port 3128 ?
    I've created the GP object and then link it directly to the Terminal Servers OU using the following options:
    User Configuration (Enabled) > Policies > Windows Settings > Internet Explorer Maintenance >
    Connection/Proxy Settings > Enable proxy settings 
    But somehow when I login as myself and DOMAIN\Administrator the proxy settings in the IE11 is still unchecked with the old Proxy value and sometimes blank in some servers.
    /* Server Support Specialist */

    > I've created the GP object and then link it directly to the Terminal
    > Servers OU using the following options:
    >
    > User Configuration (Enabled) > Policies > Windows Settings > Internet
    > Explorer Maintenance >
    > Connection/Proxy Settings > Enable proxy settings
    User policies apply to user objects - the servers will ignore them, and
    as long as there is no user in your terminal servers OU, no one will get
    this setting.
    Link your policy to the OUs where the users are, then use item level
    targeting to filter for a security group you create for this purpose,
    and add all your terminal servers to this group. Don't forget to reboot
    the servers after changing group memberships...
    Greetings/Grüße,
    Martin
    Mal ein
    gutes Buch über GPOs lesen?
    Good or bad GPOs? - my blog…
    And if IT bothers me -
    coke bottle design refreshment (-:
    Martin,
    Since the browser in the Terminal Servers are all running IE 11, do I need to do the GPO using IEAK or GPP with the new ADMX template ?
    /* Server Support Specialist */

  • How to check proxy settings for android

    Hi...when i try to go to youtube in mozilla android, it won't go at all and gives me a message to check my proxy settings...I tried as I may ...could not find or know what proxy to change...see no network options like my "Windows computers"...which I have set for "no proxy" ...pity...I added a lot of cool features to firefox and can't go to youtube and some other sites too.*john

    Hey John,
    I am sorry to hear that on mobile the Firefox for Android is asking to check the proxy. Does this happen on multiple networks?
    If there is a proxy it should be listed in about:networking. Plug that into your url and see if there is a proxy listed.
    There is also a nifty add on [https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CCYQFjAB&url=https%3A%2F%2Faddons.mozilla.org%2Fen-US%2Fmobile%2Faddon%2Fproxy-mobile%2F&ei=0n5JVM_AJtCmyATo34KICg&usg=AFQjCNEiZyw3XPMF0dUWJN36Lv5rJnKtKg&bvm=bv.77880786,d.aWw Mobile Proxy] that might be able to list them.

  • How to display the proxy settings for a specific group of servers in an OU ?

    Hi,
    Can anyone here please assist me in how to display the value of Proxy server settings from the computers in a specific OU member ?
    $Computers = Get-ADComputer -Filter * -SearchBase "OU=Terminal Servers,OU=Servers,DC=domain,DC=com" | Where-Object { Test-Connection $_.Name -Count 1 -Quiet }
    ForEach ($Computer in $Computers) {
    | Export-csv "C:\Proxy-Setting-Results.csv" -Append -NoTypeInformation -UseCulture
    I've done similar script for some other task but not sure how to do this for Proxy setting.
    Thanks.
    /* Server Support Specialist */

    Proxy settings are not set in Active Directory
    The below code works for 2003 servers and Win XP
    $colItems = get-wmiobject -class "Win32_Proxy" -namespace "root\CIMV2" `
    -computername $env:computername
    foreach ($objItem in $colItems) {
    write-host "Caption: " $objItem.Caption
    write-host "Description: " $objItem.Description
    write-host "Proxy Port Number: " $objItem.ProxyPortNumber
    write-host "Proxy Server: " $objItem.ProxyServer
    write-host "Server Name: " $objItem.ServerName
    write-host "Setting ID: " $objItem.SettingID
    write-host
    You can try checking the registry values- Works in 2008 + and Windows 7
    Get-Item 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings'
    or use netsh
    netsh winhttp show proxy -r <remotemachinename>
    Regards Chen V [MCTS SharePoint 2010]

  • I got an error message for a music streaming website. It said to check proxy settings. Where do I find them on website?

    I got an error message recently when I opened my music streaming website (Whisperings PureStream). I've had this service for several years with no problem. The error message said to check proxy settings. Where do I find these settings, to modify or change as necessary?

    Try to update the Flash plugin to the latest version.
    *https://support.mozilla.com/kb/Managing+the+Flash+plugin
    *http://kb.mozillazine.org/Flash
    *http://www.adobe.com/software/flash/about/
    See also:
    *http://www.solopianoradio.com/listen.htm

  • Strange info in "Bypass Proxy Settings for These Hosts and Domains"

    For my Mac Mini my Network IP Address always has a self-assigned 169.254 number that I cannot change. Strangely, this same IP number is similar to info that is in the Proxies section (of Network Settings) under "Bypass Proxy Settings for These Hosts and Domains".
    No matter what I do, this info (*,local, 169.254/16) appears in my Network Settings in the Proxies section under "Bypass Proxy Settings for These Hosts and Domains". (I tried removing the info and it would cause the "Configure Proxies" selection to default to "Always Use PAC File". Had to go back and retrash all the plist files to have Proxies go back to "Configure Proxies-Manually". Still, the info (*,local, 169.254/16) continues to appear in the "Bypass Proxy Settings for These Hosts and Domains" section and my IP address is always a 169.254 number.)
    Comcast cable modem via direct hardwired Ethernet works fine with my other computer, so not the modem. Also, other computer does not have any info in the "Bypass Proxy Settings for These Hosts and Domains" section.
    Installed a fresh copy of OS X 11.5 on a new hard drive. Still the same problem.
    I posted this issue before but only got one responder and the problem still exists. Any clues? Somebody must know about this stuff. Help please.
    Thanks

    When your Mac wakes up, it does not yet have an IP Addresss. It wants to send a request to a Router for an apprpriste IP address to use now. But it needs to have an IP address (like a return address) to receive any messages. So, ... wait for it,
    ... it (your Mac) makes one up. There are rules that ensure it is a random address, but they always start with 169.254. It is on the same subnet with any low-order 16 bits This is the "self-assigned" range of IP Addresses. This address is only good for talking on a local network segment, for things like asking for a valid IP Address from a DHCP-enabled Router.
    In most cases, on most networks, the 169.254 self-assigned IP Address is replaced by a valid Local IP Address such as 192.168.xxx yyy or 10.0.xxx.yyy so quickly that you never even see the 169.254 Address.
    If you do see the 169.254 Address, it can be read as "Nobody will talk to me" or "Nobody will give me an IP Address". When you have this IP Address for more than an instant, you should suspect bad cables for Ethernet connections, bad signal strength or interference for wireless, Router configuration problems, or Mac configuration problems.
    Mac configuration problems are often solved by using the "Assist Me" button is System Preferences > Network  and choosing to set up again.
    Another diagnostic is to try using Network Utility and the Ping function, and Ping-ing the address of your Airport base Station, often 192.168.0.1 or 10.0.0.1 or similar. This will tell you if the Router is reachable, or there are cabling/wirelss signal problems.
    In this case, proxies are not an issue, and are simply a distraction from the real problems.

  • I have lost the correct proxy settings for the ethernet connection using Safari.  How do I get back to the original ethernet proxy settings?

    I changed the ethernet proxy settings for Safari on my Mac Pro, when I was in a particular place that required extra security.  Now I cannot get the ethernet connection to work when back home.  The wireless connection works fine.  What are the original ethernet proxy settings.  How do I make the changes?
    Thanks

    From your Safari menu bar click Safari / Preferences then select the Advanced tab. Click Change Settings next to Proxies. Select Automatically from the Configure pop up menu.
    You may also have to select the Proxies tab. If any of the boxes are selected, deselect then click OK.

Maybe you are looking for