Proxy settings in OSX 10.4.6 iBook G4

Hi,
I recently changed proxy settings to using a pac file (http://wpad.bham.ac.uk)as my university stated that this was the best way to access athens and suchlike.
However, I keep getting a pop up box telling me to enter my username and password- every time I log on to anything requiring a password, and Itunes refuses to let me open the music store or connect to the internet. I have tried changing the proxy bit back to manual rather than using a pac file but it doesn't seem to make a difference.
Please help!!
Harriet

Hi Mmkay,
Welcome to Apple Discussions
I am sorry, but just to make sure; Does the Sudden Motion Sensor not show up in System Profile (Getting Information About Your Computer (System Profiler)). In System Profiler > click on the Hardware tab > Look in the main window and you should seen Sudden Motion Sensor below Serial Number. Does it say State: Enabled? If it doesn't show up, bring it to your local Apple Store. I don't think that reinstalling the system software will make a difference.
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Similar Messages

HT4654 setting proxy websites in osx 10.8.2

setting proxy websites in osx 10.8.2

Thank PapaSmurf (?)
My problem was that in Sound settings was not indicated the Head-Set device, although existing, but BoomDevice, that greatly enhances the sound level. So what I had to do was first change from BoomDevice to the Head-Set, and then I changed down to Internal speaker and then again chose BoomDevice. That way, I could turn off the Head-Set without getting the error message, and yet maintain the internal speaker through the BoomDevice.
I had a feeling that I had to do something with the sound settings and your reply made me experiment and succeed! Thanks once again!

Safari does not using system proxy settings (charles web proxy)

Using OSX 10.7.3 and Safari Version 5.1.3.
I start Charles, the web debugging proxy. On start, Charles adjusts the proxy settings in the Network Panel of System Preferences as expected. But Safari does not / will not honor these settings.
Has anyone else had this problem?
J

You have to apply the change before it takes effect.

IOS 5/iPad 2 proxy settings not being remembered

I recently upgraded one of my iPad 2's to iOS 5, but I seem to be having an issue the Wi-Fi connection in work. The wireless network has a hidden SSID and it requires some Manual proxy settings being put into the wireless config.
When I input the relevant information it seems to hold fine for a few seconds but when I go into Safari it prompts for an https:// proxy username and password, if I input the correct details it just prompts again and no matter how many times I input the correct information it still prompts for it over and over again, to the point that you just have to switch the wireless off to stop the message from flashing up.
I have an iPad 2 on iOS 4.3.5 and the same setting work perfectly fine on this iPad 2 but will not work on iOS 5.
I have even tried a Linksys Wireless Access Point plugged into the network with no hidden SSID etc and I still get the same thing on the iOS 5 iPad 2 it continually prompts for the proxy details, but the iOS 4.3.5 iPad2 works fine.
Is this a known glitch or am I just being a total idiot : ( ?

There are no work-arounds, there are no fixes, and no... updating to iOS 5.0.1 will not help you. This is broken and Apple needs to fix it. No "consumerisation" will not win, and our Network admin will NOT remove proxy authentication from the network to make it work. That's what Apple want me to do, and it's not happening. Here's the deal:
1. There is a difference between a HTTP proxy and a HTTPS proxy, of course, and Apple ONLY let you supply a configuration (using "Manual") for a HTTP connection. Not HTTPS. That's the problem.
2. As such, any request to a secure site (which a LOT of apps use, including Apple's own in-built ones) will fail. As soon as the connection for HTTPS is required, you will get an authentication prompt. The iPhone/iPad CAN NOT use the credentials assigned to the HTTP Proxy for the HTTPS Proxy... they are different. On a Mac (running OSX), these are definately two separate items you need to configure in the network settings and store in the KeyChain. Aple either need to write the "Manual" Proxy setting as both a HTTP and HTTPS connection (using the same KeyChain entry), or allow a HTTPS Proxy to also be specified. I favour the first option for simplicity - though it is not "standard".
3. In iOS4, Apple also supplied a "Manual" setting with a "HTTP Proxy" setting. The big difference in that case is that requests to HTTPS sites, which would require a HTTPS Proxy connection (which was not supported), were simply IGNORED or attempted to get the data using ANONYMOUS access... which in almost all enterprises with proxy servers is flat-out denied. In iOS4 your app would have a spinning wheel forever or would crash when trying to hit a HTTPS site for updates etc. In iOS4 more apps simply didn't work, but failed in a nice and quiet way. This has changed to "allowed" in iOS5, as it now is HTTPS aware and attempts to respond to Proxy auth challenges... but Apple have not provided a way to store a username and password for that connection, so you get an authentication box.
After I installed iOS5, I had my iPad on my desk all day but didn't get a chance to use it. That night I had about forty (40) of those prompts to cancel before I could use the device. Very frustrating. Even if you enter the correct username and password the million times it asks for it, you STILL get prompts... all the time. There is no good answer. If you're lucky enough to fluke a configuration and set of apps that only require HTTP connections, then you'll have no issues. That, from my experience, would be exceedingly rare.
There are three (3) possible answers here;
a) Get the network administrator to turn off authenticated proxy for the entire site. Good luck with that one.
b) Implement a solution using DHCP/TMG/Websense (or whatever your network and security products may be), or use a product like NetBox Blue. If you don't have a solution like NetBox, you'll need to set DHCP reservations for each device by MAC Address, then configure that IP Range to be "unauthenticated" in terms of the proxy server/firewall, and then specify the range an a set of categories for that new typ of conenction (if using web filtering). That will let you do MAC address authentication and bypass the authenticated proxy. This is what we've had to do - and it *****.
c) Wait for Apple to fix the issue. Like I said earlier, they'll either need to repurpose the "HTTP Proxy" option as "HTTP(S) Proxy" and allow HTTPS challenge responses to proxies via the one KeyChain item... or supply a second "HTTPS Proxy" option we can specify under "Manual". It's a fault in their software. To be honest... I preferred it when HTTPS traffic was just blocked (as in iOS4).

VPN Not working due to College Proxy Settings

2014-04-27 11:11:05 *Tunnelblick: OS X 10.9.1; Tunnelblick 3.3.0 (build 3518)
2014-04-27 11:11:05 *Tunnelblick: Attempting connection with EarthVPN-India, Pune; Set nameserver = 1; monitoring connection
2014-04-27 11:11:05 *Tunnelblick: openvpnstart start EarthVPN-India,\ Pune.tblk 1338 1 0 3 0 305 -atADGNWradsgnw -
2014-04-27 11:11:05 *Tunnelblick: openvpnstart starting OpenVPN:
2014-04-27 11:11:06 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
2014-04-27 11:11:06 Socket Buffers: R=[131072->65536] S=[131072->65536]
2014-04-27 11:11:06 MANAGEMENT: >STATE:1398577266,RESOLVE,,,
2014-04-27 11:11:36 RESOLVE: Cannot resolve host address: pun-in.earthvpn.com: nodename nor servname provided, or not known
2014-04-27 11:11:36 MANAGEMENT: >STATE:1398577296,RESOLVE,,,
2014-04-27 11:12:06 RESOLVE: Cannot resolve host address: pun-in.earthvpn.com: nodename nor servname provided, or not known
2014-04-27 11:12:41 RESOLVE: Cannot resolve host address: pun-in.earthvpn.com: nodename nor servname provided, or not known
2014-04-27 11:13:16 RESOLVE: Cannot resolve host address: pun-in.earthvpn.com: nodename nor servname provided, or not known
2014-04-27 11:13:51 RESOLVE: Cannot resolve host address: pun-in.earthvpn.com: nodename nor servname provided, or not known
2014-04-27 11:14:26 RESOLVE: Cannot resolve host address: pun-in.earthvpn.com: nodename nor servname provided, or not known
2014-04-27 11:15:01 RESOLVE: Cannot resolve host address: pun-in.earthvpn.com: nodename nor servname provided, or not known
2014-04-27 11:15:37 RESOLVE: Cannot resolve host address: pun-in.earthvpn.com: nodename nor servname provided, or not known
2014-04-27 11:16:12 RESOLVE: Cannot resolve host address: pun-in.earthvpn.com: nodename nor servname provided, or not known
2014-04-27 11:16:47 RESOLVE: Cannot resolve host address: pun-in.earthvpn.com: nodename nor servname provided, or not known
2014-04-27 11:17:22 RESOLVE: Cannot resolve host address: pun-in.earthvpn.com: nodename nor servname provided, or not known
2014-04-27 11:17:57 RESOLVE: Cannot resolve host address: pun-in.earthvpn.com: nodename nor servname provided, or not known
2014-04-27 11:18:08 *Tunnelblick: Disconnecting; 'disconnect' button pressed
2014-04-27 11:18:08 *Tunnelblick: Disconnecting using 'killall'
2014-04-27 11:18:32 RESOLVE: signal received during DNS resolution attempt
2014-04-27 11:18:32 SIGTERM[hard,init_instance] received, process exiting
2014-04-27 11:18:32 MANAGEMENT: >STATE:1398577712,EXITING,init_instance,,
2014-04-27 11:18:33 *Tunnelblick: No 'post-disconnect.sh' script to execute

Thanks for the reply Jkbull .
My issue was solved by using "Viscosity" a vpn client for Mac which even works with OSX Yosemite.
but i cannot find any solution for tunnelblick.
I am not sure but think the problem was with tun-tap settings or 443 port.
I have tried changing the reference to "pun-in.earthvpn.com" in the OpenVPN configuration file to its current IP address of "103.250.184.251".
I have an option in mac network settings to use one or more DNS Servers so i have added Google Public DNS and my college DNS server- "202.141.81.2".
I Cannot connect to Internet by not using proxy because our connections go through our proxy server "202.141.80.19:3128" and we have user-password login for this server to establish a internet connection.
The Problem still persists.
When i connect with viscosity,
Initially i use my college proxy settings.
Connect to EarthVpn by using Viscosity
It asks me with the username, password of the earthvpn account and when provided it establishes connection.
I use no proxy(that is remove my proxy settings) after the connection is established.
Now it is connected to VPN.
I wish tunnelblick guys come up a solution for this problem.

Firefox suddenly stopped opening webpages, while other browser work properly. I checked Proxy settings and everything that is mentioned in the central help page, but still no solution found...

In addition, i tried to re-install Firefox many times, without a result. In the time these lines are written, I am using Google Chrome to surf the web.
Neither proxy settings, nor the true/false ipV6 values helped.
The '''"symptoms"''' are as following:
--> The programm itself starts correctly, at usual speed, with no crashes or error messages to pop-up.
--> No page is displayed, neither the home page, nor any other one. I only see a blank white page.
-->The name of the starting tab, as of any other new tab I try to open is "(Untitled)"
-->There is no probability of errors in the Internet Line, because I am using it right now, running Chrome.
-->The full scan results are totally clean, using Panda Internet Security 2011, activated and updated.
-->The Error Console shows the following messages:
Could not read chrome manifest file 'C:\Program Files\Mozilla Firefox\extensions\{972ce4c6-7e08-4474-a285-3208198ce6fd}\chrome.manifest'.
Warning: XUL box for _moz_generated_content_after element contained an inline #text child, forcing all its children to be wrapped in a block.
Source File: chrome://browser/content/browser.xul
Line: 0
Warning: WARN addons.updates: HTTP Request failed for an unknown reason
Source File: resource://gre/modules/AddonUpdateChecker.jsm
Line: 503
Warning: WARN addons.repository: Search failed when repopulating cache
Source File: resource://gre/modules/AddonRepository.jsm
Line: 573
Error: Livemark Service: feed processor received an invalid channel for http://fxfeeds.mozilla.com/en-US/firefox/headlines.xml
Source File: resource://gre/components/nsLivemarkService.js
Line: 635
Error: Livemark Service: feed processor received an invalid channel for http://www.dent.uoa.gr/data/feeds/announcements_atom.rss
Source File: resource://gre/components/nsLivemarkService.js
Line: 635.
These Error messages appear in the Error Console of the just now downloaded Firefox 4.0. In the previous version, 3.6.12, before removing it, I noticed two more error messages in the error console, like the two last as listed above: With the nema ERROR.
I am forced now to use Chrome, and I dislike that!
Some could suspect that Google has sabbotaged firefox to get its popularity by forcing users to change browsing programms by giving them a hidden worm..?? :P
Please, help me out anyone with good will and strong tech-knowledge.
Tasos!

Create a new profile as a test to check if your current profile is causing the problems.
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

How can I have proxy settings stay for multiple users on an educational network?

Hi,
I want to be able to have mutlple users log onto machines and haave proxy settings already set in preferences. I have tried by copying the Mozilla folder in to the All users location and does not help.
Each user logs onto a computer with a mandatory or Roaming account depending on account security. Settings for firefox are picked up from their Documents and settings folder when they log on (It is created when they log on for the first time)
Is there a way to pull across proxy settings for a new user? Ussually it would be a case of just sticking it in All Users.
Thanks

A possibility is to create a file user.js and place that file in the default template location (defaults\pref) in the Firefox program folder.
If you don't want users to change the proxy (connection) settings then you can also lock the prefs or set a different default value.
See http://kb.mozillazine.org/Locking_preferences
You can use these calls in mozilla.cfg to set or lock a pref:
defaultPref(); // set new default value
pref(); // set pref, but allow changes
lockPref(); // lock pref, disallow changes
http://kb.mozillazine.org/network.proxy.type
http://kb.mozillazine.org/network.proxy.%28protocol%29
http://kb.mozillazine.org/network.proxy.%28protocol%29_port

How to use proxy settings for one website

Hello,
I have to access the only one website using Proxy settings and for others I don't need proxy to access. Is there a way to configure the internet settings to allow one website using Proxy... Please advise. Thanks!
Regards,
Aravin S

I am also getting this "error". The printer (8500 A910) connected to the web well enough that it went out and supposedly downloaded a new update, but then it was supposed to print a page showing the email address, but did not.
So I go in and try to set up the eprint, and it tells me it cannot connect to the sever and I'll need to enter a proxy address and port number. But my ISP's cable modems do NOT have any static IP address nor do they provide any sort of proxy service. Everything works just fine with "automatic discovery" (DHCP) for every computer in the house. No problems there.
So, since that's the case, of course I cannot look up some proxy address and port number in my web browser because they're all set up for "automatically detect settings".
What's baffling is that the printer connected to something at HP to download the "update", and it went through a process that appeared to be what I'd expect it to do if it was updating its firmware. But it won't connect to whatever it's supposed to connect to to have an email address assigned.
Does HP supply a proxy server? If so, what's its IP address or URL, and what port should a person set the printer to try to use?
UPDATE:
It appears that the HP site must have just been "down" for about six or seven hours while I was trying to get the printer to connect because it now connected and I got an email address asigned without needing to have any "proxy" stuff set up at all. It's a shame that the printer does not simply report "HP Site down - try again later" instead of reporting that you need to use a proxy when that's impossible.
"Now, on to the next problem which is that my emails to the assigned address are all bouncing with a "550 5.7.1 Command rejected" error!

How to make proxy settings in solaris 10 i386

Dear Sir,
I need your help in making proxy settings in solaris 10 x86, as well as on SPARC.
i installed on virtual machine, and later i wanted to do the same on M4000 server. please help.
Why I need to set proxy?
I am on a co-orporate network, and it requires proxy to use internet to download packages for sun directly from sun machine.
What package I want to download?
I want to dowload CUPS to configure LINE PRINTER(ALIS5180).
What did i do to configure line printer?
1, i installed sun solaris 10 on a dell server to make it as a "print server"
2, with the print manager I configure "alis5180"
3, give the print command to test the printing.
4, I did not got success, coz it is not printing the document i want, it is printing junk.
5, i clear the cache of alis5180 printer.
6, reset all the emulations ANSI, IBM Proprinter III XL, Epson FX-1180, Printronix® P600 & P 5000/6000, DEC® LG01, HP 2564C, Tally line/dot matrix printer, Epson FX 1180,
MTPL, contextual arabic, Twinax (IBM 4234/4210/5225)/Coax(IBM4234), HP LineJet HPLP Series, HP 256X no success.
Conclusion:-
This is why I want to configure cups. and I need internet access on the print server to download the this package, and it require internet connection.
Regards,
Mky
Edited by: user9007339 on Jan 22, 2012 3:29 AM

You could try the Dell site, but I doublt if they will have a driver for Solaris, Linux maybe but not Solaris. Otherwise try the DriverGuide web site. http://www.driverguide.com/
You could also try installing OpenSolaris if you don't specifically need Solaris 10. Better chance that OpenSolaris will support the NIC.

Proxy Settings Re-Appear after Reboot in Registry Post Malware Clean (Windows 8.1 x64)

Hey Guys -
My main system at home hosts many different things for me. Because I'm an idiot and had protection disabled, I caught some malware which I cleaned off soon
afterwards. The malware was listed as Trojan.Generic.KD or something similar. It had enabled Proxy and set it to 127.0.0.1:58054. I ran Malwarebytes, Spybot, then ExecuteIt to clean the malware off and currently the scans from all 3 apps
come back clean. I also had to manually disable proxy via IE settings.
I have one specific app which for whatever reason will use Proxy settings if they are there over anything else and doesn't offer and configuration to disable it.
Even though proxy is disabled (and cleared) in IE, this app still doesn't work and I still seemingly get redirected to ads in Chrome sometimes. The log file of the app showed it was trying to connect through 127.0.0.1:58054. The thing is,
IE Settings still show Proxy disabled!
The Issue
I checked many things are read a few articles to try to fix this including different Windows 8.1 settings, local Group Policy, startup items, checking Run keys
in HKLM and HKCU for "out of place" entries, and more. Finally, I opened the registry and did s keyword search for ":58054" and found one key with it. I cleared out all of the data and set the EnableProxy string from "1"
to "0", rebooted, and tried again but the app still failed with the same log message. I went back into the registry and found out that the strings I changed had all been changed back! Below is the key / strings I'm talking about which
are located in HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Internet
Settings. It's odd because I usually deal with HKLM and HKCU and don't think I've ever worked in ".DEFAULT" on any system ever before.
I know that a full OS re-install is suggested - and I actually do it every 3-4 months religiously - but - I currently don't have the time for the full day it
takes to perform due to how many things it hosts.
Any ideas on how I can get this to stop coming back after each restart until I can perform the re-install? Below are the system specs. Thanks!
System Specs
- Intel i7-3770k / 16gb RAM
- x3 partitions 256gb SSD for OS & Apps / 24tb Disk Pool for Storage / 500gb Hybrid drive for App installs
- Windows 8.1 Update 1 x64 (Fully Patched)
Thanks again!
Ben K.

Hi,
.default is the profile for the Local System account and is an alias for
HKEY_USERS\S-1-5-18, Consequently, settings in HKEY_USERS\.Default are used by programs and services that run as Local System.
In addition to HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Internet
Settings, please also check HKEY_USERS\S-1-5-18\Software\Microsoft\Windows\CurrentVersion\Internet
Settings and HKCU\Software\Microsoft\Windows\CurrentVersion\Internet
Settings, make sure all proxy server disabled, then press F5 to refresh registry, check the application, if the issue disappears, the the registry entry is the culprit. Then please reboot the PC, if the issue appears again, the virus is not cleared in your
system. In this case, please try other virus clean program if possible, meanwhile, check if there're unknown software installed in your system.
Yolanda Zhu
TechNet Community Support

How Can I pre-configure the proxy settings in Acrobat 8?

We use a proxy server to authenticate users and it's causing a problem for our e-licensing. Is there a place to pre-configure the proxy settings / login and password for the e-licensing to happen quietly so our users don't have to see it?

Have you searched the forum for proxy? I do not have an answer, but this has been discussed before. I am not sure there is an answer in the discussions, but it is worth a try. There is likely a knowledgebase article on the issue also. Good luck.

Steps to apply Proxy settings for all Server in a specific OU using Group Policy ?

People,
I have several terminal server (2008 R2) running as RDSH in an OU called Terminal Servers.
So how can I create the GPO setting to make sure that everyone who login to this terminal server will be getting the proxy settings automatically to proxy.domain.com on port 3128 ?
I've created the GP object and then link it directly to the Terminal Servers OU using the following options:
User Configuration (Enabled) > Policies > Windows Settings > Internet Explorer Maintenance >
Connection/Proxy Settings > Enable proxy settings
But somehow when I login as myself and DOMAIN\Administrator the proxy settings in the IE11 is still unchecked with the old Proxy value and sometimes blank in some servers.
/* Server Support Specialist */

> I've created the GP object and then link it directly to the Terminal
> Servers OU using the following options:
>
> User Configuration (Enabled) > Policies > Windows Settings > Internet
> Explorer Maintenance >
> Connection/Proxy Settings > Enable proxy settings
User policies apply to user objects - the servers will ignore them, and
as long as there is no user in your terminal servers OU, no one will get
this setting.
Link your policy to the OUs where the users are, then use item level
targeting to filter for a security group you create for this purpose,
and add all your terminal servers to this group. Don't forget to reboot
the servers after changing group memberships...
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:
Martin,
Since the browser in the Terminal Servers are all running IE 11, do I need to do the GPO using IEAK or GPP with the new ADMX template ?
/* Server Support Specialist */

How to access proxy settings in terminal

I want to use git in the terminal, but unfortunately I'm sometimes (but not always) behind a firewall that requires me to use a proxy server.
I've successfully set up environments for all these locations, including the proxy settings that are relevant in each context, but I'm unable to access them in the terminal (i.e. there's no HTTP_PROXY environment variable). My idea is to 'inherit' the system wide proxy settings in the terminal and use them to configure git.
Is there any way to access the proxy settings in the terminal.

In you home directory, create a file called .bash_profile (notice the leading dot)
nano .bash_profile
add to that file
export HTTP_PROXY="http://your.proxy.information:nnn"
Save the file
Restart the Terminal session.
Command line Git should work via the environment variable you just created.
NOTE: you will need to use
ls -a
to see the .bash_profile in a Terminal session, and because the leading dot makes it an invisible file, the Finder will not show it without some magic Finder Foo

How to check proxy settings for android

Hi...when i try to go to youtube in mozilla android, it won't go at all and gives me a message to check my proxy settings...I tried as I may ...could not find or know what proxy to change...see no network options like my "Windows computers"...which I have set for "no proxy" ...pity...I added a lot of cool features to firefox and can't go to youtube and some other sites too.*john

Hey John,
I am sorry to hear that on mobile the Firefox for Android is asking to check the proxy. Does this happen on multiple networks?
If there is a proxy it should be listed in about:networking. Plug that into your url and see if there is a proxy listed.
There is also a nifty add on [https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CCYQFjAB&url=https%3A%2F%2Faddons.mozilla.org%2Fen-US%2Fmobile%2Faddon%2Fproxy-mobile%2F&ei=0n5JVM_AJtCmyATo34KICg&usg=AFQjCNEiZyw3XPMF0dUWJN36Lv5rJnKtKg&bvm=bv.77880786,d.aWw Mobile Proxy] that might be able to list them.

How to display the proxy settings for a specific group of servers in an OU ?

Hi,
Can anyone here please assist me in how to display the value of Proxy server settings from the computers in a specific OU member ?
$Computers = Get-ADComputer -Filter * -SearchBase "OU=Terminal Servers,OU=Servers,DC=domain,DC=com" | Where-Object { Test-Connection $_.Name -Count 1 -Quiet }
ForEach ($Computer in $Computers) {
| Export-csv "C:\Proxy-Setting-Results.csv" -Append -NoTypeInformation -UseCulture
I've done similar script for some other task but not sure how to do this for Proxy setting.
Thanks.
/* Server Support Specialist */

Proxy settings are not set in Active Directory
The below code works for 2003 servers and Win XP
$colItems = get-wmiobject -class "Win32_Proxy" -namespace "root\CIMV2" `
-computername $env:computername
foreach ($objItem in $colItems) {
write-host "Caption: " $objItem.Caption
write-host "Description: " $objItem.Description
write-host "Proxy Port Number: " $objItem.ProxyPortNumber
write-host "Proxy Server: " $objItem.ProxyServer
write-host "Server Name: " $objItem.ServerName
write-host "Setting ID: " $objItem.SettingID
write-host
You can try checking the registry values- Works in 2008 + and Windows 7
Get-Item 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings'
or use netsh
netsh winhttp show proxy -r <remotemachinename>
Regards Chen V [MCTS SharePoint 2010]

Proxy settings in OSX 10.4.6 iBook G4

Similar Messages

Maybe you are looking for