Proxy structures not getting populated in receiver ABAP proxy

hello
i am having HTTP-ABAP Proxy scenario where i am entering sales order information from HTTP and sending it to SAP CRM system. I am using ABAP receiver Proxy for getting the message.
But when i debugged the code of receiver proxy i couldn't found the structures being filled by the data. i checked in SXMB_MONI of CRM which was containing data into its payload but no data into the structures. actually i have generated proxy of the interface which uses external definitions as data type.
has anyone faced such problem before?
thanks in advance.
Regards
Rajeev

Hi Rajeev,
There should not be any problem due to XSD u have used.Ur proxy is created sucessfully i guess?? There may be some discrepancy in ur code..
check the server proxy....may be helpful for u..
Server Proxy (Receiver Proxy)-
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
File to ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
check the threads also...
problem in proxy?
Re: coding of Server proxy
Re: coding of Server proxy
regards
BILL

Similar Messages

  • Field in ALV not getting populated

    Hi all,
               I need some help. I am displaying an ALV with fields.
        GROUP     G/L ACCOUNT     Local currency       USD     Period
           100              10                       5                       5           12
           100               11                      6                       4            12
      now i have added an extra field TXT20 in the as last field of structure
        GROUP     G/L ACCOUNT     Local currency       USD     Period      TXT
           100              10                       5                       5           12          aa
           100               11                      6                       4            12         ab
    TXT should come as 3rd coloumn in the output.
    EXAMPLE:
         GROUP     G/L ACCOUNT       TXT      Local currency  USD     Period     
           100              10                      aa                  5              5           12         
           100               11                     ab                   6             4            12        
    I have changed the coloumn positions in the field catalog accordingly and I have not written or changed any select queries from earlier output.
    now my problem is PERIOD field is not getting populated in the ALv,the data is visible in the IT_FINAL which I am passing to Reuse_alv_grid_display. the field catalog is also getting build properly.
    so plz suggest some changes so that I can move ahead.

    Hi
      I don't know what's the reason and now I have no environment to test it, but you can try other way:
      1. define your fieldcate one by one as the sequence of your output like
          GROUP         G/L ACCOUNT          TXT           Local currency         USD          Period
          In this situation, you needn't use component -- position of fieldcate structure. Pay attention to
          fieldname in upper case.
       2. If only doing step1 has no effect, then adjust your structure of internal table. Sequence your
           component of IT_FINAL as the output field like step1.
       If still no effect, please let me know.

  • OVS value not getting populated in field

    Hi Experts,
    Kindly suggest me a solution for the below given issue.
    I have added three custom fileds to an already existing WD Coponent.
    And also added OVS help as an input help method to these fields.
    If I right click on the WD application and TEST, the application opens in browser and I am able to select the value from OVS list.
    If I run the application by copying the URL and paste it in the browser, or clicking on Portal link, if we select the value from OVS list that value is not getting populated in the field.
    Below is the logic I have written.
    method ON_OVS_PAYMENT .
    TYPES:   BEGIN OF ty_payment,
                 payment TYPE char4,
                 desc    TYPE char30,
               END OF ty_payment.
    * declare data structures for the fields to be displayed and
    * for the table columns of the selection list, if necessary
      types:
        begin of lty_stru_input,
    *   add fields for the display of your search input here
          payment type char4,
    *      desc    type string,
        end of lty_stru_input.
      types:
        begin of lty_stru_list,
    *   add fields for the selection list here
          payment type char4,
          desc    type char30,
        end of lty_stru_list.
      data: ls_search_input  type lty_stru_input,
            lt_select_list   type standard table of lty_stru_list,
            ls_text          type wdr_name_value,
            lt_label_texts   type wdr_name_value_list,
            lt_column_texts  type wdr_name_value_list,
            lv_window_title  type string,
            lv_group_header  type string,
            lv_payment       type string,
            lt_payment       TYPE TABLE OF ty_payment,
            ls_payment       TYPE ty_payment,
            lv_short         TYPE string,
            lv_table_header  type string.
      field-symbols: <ls_query_params> type lty_stru_input,
                     <ls_selection>    type lty_stru_list.
      case ovs_callback_object->phase_indicator.
        when if_wd_ovs=>co_phase_0.  "configuration phase, may be omitted
    *   in this phase you have the possibility to define the texts,
    *   if you do not want to use the defaults (DDIC-texts)
          ls_text-name = `PAYMENT`.  "must match a field name of search
          ls_text-value = `Terms of payment`. "wd_assist->get_text( `001` ).
          insert ls_text into table lt_label_texts.
          ls_text-name = `PAYMENT`.  "must match a field in list structure
          ls_text-value = `Terms of Payment`. "wd_assist->get_text( `002` ).
          insert ls_text into table lt_column_texts.
          ls_text-name = `DESC`.  "must match a field in list structure
          ls_text-value = `Description`. "wd_assist->get_text( `002` ).
          insert ls_text into table lt_column_texts.
          ovs_callback_object->set_configuration(
                    label_texts  = lt_label_texts
                    column_texts = lt_column_texts
                    group_header = lv_group_header
                    window_title = lv_window_title
                    table_header = lv_table_header
                    col_count    = 2
                    row_count    = 20 ).
        when if_wd_ovs=>co_phase_1.
          ovs_callback_object->context_element->get_static_attributes(
              importing static_attributes = ls_search_input ).
    *     pass the values to the OVS component
          ovs_callback_object->set_input_structure(
              input = ls_search_input ).
        when if_wd_ovs=>co_phase_2.
          if ovs_callback_object->query_parameters is not bound.
    ******** TODO exception handling
          endif.
          assign ovs_callback_object->query_parameters->*
                                  to <ls_query_params>.
          if not <ls_query_params> is assigned.
    ******** TODO exception handling
          endif.
    *     call business logic for a table of possible values
    *     lt_select_list = ???
          lv_short = <ls_query_params>-payment.
          CALL FUNCTION 'ZSIILESD001' DESTINATION 'LOGICALE22'
          EXPORTING
          i_payment             = lv_short
          TABLES
          ET_PAYMENT            = lt_payment.
        lt_select_list[] = lt_payment[].
          ovs_callback_object->set_output_table( output = lt_select_list ).
        when if_wd_ovs=>co_phase_3.
    *   apply result
          if ovs_callback_object->selection is not bound.
    ******** TODO exception handling
          endif.
          assign ovs_callback_object->selection->* to <ls_selection>.
          if <ls_selection> is assigned.
            ovs_callback_object->context_element->set_attribute(
                                   name  = `PAYMENT`
                                   value = <ls_selection>-payment ).
          endif.
      endcase.
    endmethod.

    Hi Pradeep,
    I don't think it really make any difference to the application run if we run from SE80 or run via application url.
    Try to set the external break point in OVS PHASE3 for your user. Check if the break point is reached and data is set after selection from OVS.
    Regards,
    Rama

  • Default Value in a DFF is not getting populated in Self Service Page

    I had an issue in Self Service Page.
    In the SS page there is hidden mandatory field in DFF segment,which should get populated with a default select statement.
    But this field is not getting populated with the default values.
    But this is working fine in Forms , i.e the default value is populated in forms.
    Why the default value is not populated in Self Service Pages?
    For Eg: If there is a DFF "SAMPLE_DFF" which has some context with segment
    Context Code : GB_CODE
    Segment : "Enter the Group"
    and this segment is made required and defaulted with a select stmt (select stmt returns 'XXXXX')
    In forms if am not entering any value, then its defaulted to 'XXXXX'.
    But in Self Service this is not happening.
    Can anybody help me out...

    Actually, I have narrowed down the problem. It is not quite the same.
    DFF is Receivables, Address Information (Release 12). We have 2 attributes defined and we want the default value of the 2nd to be dependent on what the user selects in the 1st.
    So the default value of the 2nd is defined as a SQL Statement, select :$FLEX$.INDUSTRY_CODE from dual (where INDUSTRY_CODE is the value set name from the 1st).
    We know the syntax is correct because if we actually hardcode a default value in the 1st attribute (select 'BLAH' from dual), then we do see that the default value for the 2nd attribute fills in with BLAH as well. However, we do not want that. We want the user to choose a value for the 1st attribute from the LOV, and then have the 2nd attribute default to that same value. This is the part that does not seem to work in OAF, but definitely used to work in Forms.
    Any thoughts?
    Thanks much!

  • ALV Block list. Field name at user command not getting populated

    Hi All,
    I'm trying to use ALN block list. Field catalog is built using the REUSEALVMERGE FM.
    I've put hot spot on some fields. When I'm trying to capture the data when user clicks on the hotspot field the structure that comes in the user_command subroutine is not getting populated with the fieldname. But it is getting populated with the tabname and value is also coming properly.
    FORM user_command
              USING
              ucomm    TYPE sy-ucomm
                    selfield TYPE kkblo_selfield.
    What could be the possible reason?
    I appreciate your inputs.

    Hi Surya,
             Did you find the solution for this?
    Best Regards.

  • Currency Field - KOMK-WAERK not getting populated

    Dear All,
    In my infoset, i am reading the value from KONV table. But when i generate the infoset, system prompts a Warning Message saying:
    Currency Field KOMK-WAERK will not be filled. Affected currency amount fields: (& it gives out the list of fields).
    In my data section when i put TABLES KOMK, then the message does not appear, but the currency field still does not get populated when i execute the query.
    Any suggestions as to how i can make the currency field populate in my output?
    Await inputs.
    Anyone to help?
    Edited by: Vivek on Feb 9, 2008 8:51 PM

    Is not KOMK a structure, you need to fill this structure. Try to map required fields as following :
    CLEAR KOMK.
    KOMK-MANDT = SY-MANDT.
    KOMK-KALSM = VBDKR-KALSM.
    KOMK-FKART = VBDKR-FKART.
    KOMK-KAPPL = 'V'.
    IF VBDKR-KAPPL NE SPACE.
    KOMK-KAPPL = VBDKR-KAPPL.
    ENDIF.
    KOMK-WAERK = VBDKR-WAERK.
    KOMK-KNUMV = VBDKR-KNUMV.
    KOMK-VBTYP = VBDKR-VBTYP.
    KOMK-BUKRS = VBDKR-BUKRS.
    KOMK-BELNR = VBDKR-VBELN.
    Regards

  • Values not getting populated in the SMOPCCAPRO

    Hi,
    We had added a new field to CPGProduct in component CPGOE_ABLOCKS. But the extension field was not included to the BOL structure automatically.
    So ,we had used the SAP note 1472567 to add the include structure INCL_EEW_MKTPL_PRD to structure CRMS_MKTPL_CPG_PROD which inturn would rectify our BOL  structure CRMS_MKTPL_IB_CPG_PROD.
    The field which we had added using AET was added in tables CRMD_MKTPL_PROD and SMOPCCAPRO. But we are facing an issue that the values are not getting populated in the SMOPCCAPRO table on save.The values are gettign populated in the CRM table.
    Do we need to implement any other SAP note on the midleware side too to rectify this issue as i infer some interface structure would be missing this field which results in the truncation of value from being passed to the CDB table . Any pointers in this regard would be helpful.
    Thanks
    Swapna.

    Hi Swapna,
    as the CDB table has been extended with the new field I assume that you have enabled the mobile flag for the enhancement.
    Then it will also extend the mobile BDOC and the data should be transfered automatically.
    If this does not happen there's an error somewhere. Either the middleware is not set up properly or the mapping routine does not transfer the fields properly.
    I recommend to raise an OSS message for this.
    Best regards
    Matthias

  • Taxcode not getting populated in MIRO Header in Dropdown

    Hi All,
    We created a new Taxcode through FTXP transaction for country and TAX schema and maintained condition records in FV11 transaction for relevant conditions.
    We created a PO with new tax code received goods.
    But while in transaction MIRO for LIV , new tax code is not getting populated at header in TAXCODE field.
    I have checked SDn for the same , they have specified OBTZ transaction for taxcode.
    I havent used this T.code in my previous assignments.
    Please throw some light on the same.
    With Regards,
    Vijaykumar P

    Hi All,
    Thaks for reply,
    But default tax code is maintained in OMR2.
    In MIRO transaction if we go to tax code tab and click Calculate Tax, the tax code in Basic data tab should get updated and all taxes has to be calculated correctly.
    But in this case the taxes are not calculated and taxcode is not appearing in dropdown also.
    Please do throw some light.
    With Regards,
    Vijaykumar P

  • IS Retail - Inventory - Retail price BWGV0 is not getting populated

    Hi ,
    We have activated IS retail industry specific indicator in SBIW. Fo some reason when I do RSA3 in '2LIS_03_BF' , all the stock movements are displayed but the retial price field BWGV0 is not getting populated. Do you guys have come across this situation ? Please let me know.
    Thanks
    Hareesh

    Some documents below might worth taking look..
    Process key logic for MM inventory can be found in OSS note 492828
    Logic for MM purchasing can be found in note 684465
    Activating the process key logic in R/3 for MM should be as simple as setting the correct industry in MCB_ (also found under SBIW), but if it doesn't work look at OSS note 353042. In the end haveto use trans BF11 to add an entry to a table, even though the plugin is 2003.1 on R/3 4.6C.
    352344
    492828 Determining the transaction key for 2LIS_03_BF + 2LIS_03_UM
    Hope it Helps
    Chetan
    @CP..
    Hope it Helps
    Chetan
    @CP..

  • Users details not getting populated in the portal tables..

    Hi,
    We have implemented single sign on (SSO) and we do not create users in the portal as user/pwd come from OID.
    Now becoz of this the portal tables are not getting populated.I require that all the users of the OID to be populated in the portal tables. How can I do it.I depserately require it.

    You can use the function wwsec_api.activate_portal_user to create the shadow records in the portal repository.
    Ref. : http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/wwsec_api.html

  • Values not getting populated in the o/p

    Hi,
    I have a requirement,where in which I have to add MRP Controller(marc-dispo) and production scheduler(marc-fevor) fields in the selection screen and the same should be added in the o/p.These fields are not getting populated in the o/p,even if I give some values for these fields in the selection-screen.What would be the reason for this?
    Regards,
    Hema

    Dear Hema,
    Could you please tell me how many internal tables you are using to store the data for display.
    I observerd that you have lt_stock and lt_mat2 declared in the part of the program
    >DATA: lv_stock TYPE lty_stock.
    >DATA: ltmat2 TYPE TABLE OF lty_mat.
    you have displayed above, however you are also using ls_stock and lv_stock .
    >IF p_ztotal = ' '. "line
    >WRITE 18 ls_stock-matnr.
    >WRITE 38 lv_stock-strgr.
    >
    >ELSEIF ztotal = 'S'.                             "subtotal
        >WRITE: 15 ls_stock-nrmit.
        >WRITE 32 lv_stock-dispo.                    
        >WRITE 43 lv_stock-fevor.                      
      >ELSE.                                            "total
        >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
    >
      >ENDIF.
    Are those for displaying some other information?
    Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
    Best Regards,
    Rajesh.
    Please reward points if found helpful.

  • Amount not getting populated in me21n

    hi,
    amount is not getting populated for the condition type in the conditions tab of me21n.

    Hi
    Have you maintained Info record with conditons? Please write in detail.
    regards
    Srinivas

  • UWL : New tasks are not getting populated in the UWL

    Hi Experts,
        I<b> configured my uwl to my backend system , the completed tasks are getting populated in the UWL but the New tasks and in progress tasks are not getting populated in the UWL.(some thing strange).</b>
    When  i am trying to configure the universal  worklist system ,its givin me a caution message as  <b>System SHDCLNT012 does not support optimized delta pull</b> . where SHDCLNT012 is the system alias name.
    Is this the problem for not populating the new tasks in the UWL?
    Please provide me  the solution..
    Thanks & Regards,
    Sateesh

    Hi Sateesh,
    This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
    Kai

  • WBS element is not getting populated in Excise entry in Project billing

    Hi SAP Guru's
    We have the case where we are doing the billing from manufacturing plant against Project. While billing WBS element is appearing in the invoice but in excise invoice entry same is not getting populated. This is affecting RR and P&L.
    Can you help me by providing the standard solution to meet this requirement or update if we can meet this requirement by some function module or through any exit.
    Thanks
    Surender Gupta

    Hi,
      In transaction" VTFA" and for your sales and billing type,select your item category and in the same scree,your pricing type should be "D".This will copy all the conditions from sales order item.
      Reward if this helps.
    Regards
    Karan

  • Search Help for Vendor Feild not getting populated in the Screen Element

    Hi Everyone,
    In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
    The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
    Now that the search help exists and I can drill down the values too but when i select/choose any value,  that value is not getting populated in Screen feild.
    is there any validation I need to do for this.
    Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
    Regards,
    Raj

    Dear Hema,
    Could you please tell me how many internal tables you are using to store the data for display.
    I observerd that you have lt_stock and lt_mat2 declared in the part of the program
    >DATA: lv_stock TYPE lty_stock.
    >DATA: ltmat2 TYPE TABLE OF lty_mat.
    you have displayed above, however you are also using ls_stock and lv_stock .
    >IF p_ztotal = ' '. "line
    >WRITE 18 ls_stock-matnr.
    >WRITE 38 lv_stock-strgr.
    >
    >ELSEIF ztotal = 'S'.                             "subtotal
        >WRITE: 15 ls_stock-nrmit.
        >WRITE 32 lv_stock-dispo.                    
        >WRITE 43 lv_stock-fevor.                      
      >ELSE.                                            "total
        >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
    >
      >ENDIF.
    Are those for displaying some other information?
    Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
    Best Regards,
    Rajesh.
    Please reward points if found helpful.

Maybe you are looking for