Proxy Synchronous

Hi
I am doing proxy to proxy(CRM>PI->ECC) syncronous. I created XI adapter for ECC system. here i have one doubt do we have create XI adapter for CRM system? Can any one plz help me on this?
Thanks
Govinda.

Hi,
Please refer to these Blogs...
Communication between SAP System & Webservice Using Proxies
/people/siva.maranani/blog/2005/05/23/communication-between-sap-system-webservice-using-proxies
ABAP Proxies in XI(Client Proxy)
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Server Proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Regards
Sunil.

Similar Messages

File to Proxy synchronous scenario

Experts,
I am working on a File to proxy synchronous scenario.
I am doing the content conversion at the sendre side by using java program as input structure is very complex so have to go fr java code. Its a txt file at sender side.
Once I read the file in XI, am doing a graphical mapping ( just one to one mapping) then using the server proxy , a service entry is getting created then response am sending to the receiver.
My question is , can I use graphical mapping as I am using a java class for content conversion? both in one scenario is possible?
I have developed a java code for content conversion and it is working fine. How to use this .jar file in XI?
Can Any one help me wz thsi one?
Thanks in Advance
Virendra

My question is , can I use graphical mapping as I am using a java class for content conversion?
You can use as long as the structure generatde by the JAVA program is same as the source-message structure of the message mapping.
I have developed a java code for content conversion and it is working fine. How to use this .jar file in XI?
In my opinion this should be the adapter module....as the conversion needs to be done in the channel and inclucing it as a mapping wont help.
Regards,
Abhishek.

SOAP to Proxy synchronous scenario

Hi,
Hope you are all doing well.
I have a SOAP to Proxy synchronous scenario. As part of this scenario, the data structure of the response sent by SAP is different from the response sent back to the SOAP requester. Hence I have used request message mapping between the SOAP request sent by requester and the one passed on to SAP and response message mapping between the response sent by SAP and the one passed on to the requester. Both the message mappings are incorporated in a single Interface mapping.
The problem is that the interface is behaving like a asynchronous one, i.e., request is passing over to SAP but though the proxy is giving a response back, the same is not coming over to XI.
It would be really helpful if you can let me know what might have gone wrong.
regards
Debansu

Hi,
you should have that:
1. Two Message Mapping:
1.1. a Message Mapping for request    (called MM_request)    , from MT_SOAP_request     to   MT_Proxy_request.
1.2. a Message Mapping for response (called MM_response) , from MT_Proxy_response   to   MT_SOAP_response.
2. One Operation Mapping (in PI 7.1) or Interface Mapping (in PI 7.0) from SI_SOAP to SI_ Proxy with:
2.1 in the tab "request", so from MT_SOAP_request     to   MT_Proxy_request    , give your Message Mapping "MM_request".
2.2 in tab "response"   , so from MT_Proxy_response   to   MT_SOAP_response, give your Message Mapping "MM_response".
3. In you Directory, you define a flow like that:
from SI_SOAP to SI_ Proxy by using your Operation Mapping.
If I missed nothing, that's all.
MT = Message Type
MM = Message Mapping
SI =Service Interface in PI 7.1 or Message Interface in PI 7.0.
regards.
Mickael
Edited by: Mickael Huchet on Oct 19, 2011 4:07 PM

SOAP - XI- PROXY synchronous scenario

Hi Experts,
I have a
SOAP -
XI -
PROXY Synchronous Scenario
I have done the following things ESR and ID
ESR:
1. Created DT and respective MT for Request and Response.
2. Created Service Interfaces with Synchronous mode with respective MT's.
3. Created Two separate MM with respective Request and Response MT's.
4. Created Operation Mapping and call both Request and Response Mappings in it.
Integration Directory (ID):
1. Configured considering Sender SOAP and Receiver ECC Services.
2. Configured CC with required parameters in Sender SOAP CC and Receiver XI CC.
3. Generate wsdl from Sender agreement and save it as a local file.
I am getting error in receiver agreement. Do I need to specify any Module parameters in Module TAB for Sender CC or Receiver CC to synchronous scenario.
Please hep me out.
Thanks

Hi Ram,
I am getting error in receiver agreement. Do I need to specify any Module parameters in Module TAB for Sender CC or Receiver CC to synchronous scenario.
It looks like you did not create a receiver agreement, or if you did, it did not match the interface that is given or configured in Interface Determination. Can you recheck your configuration?
Regards,
Mark

Web Service u0096 ABAP proxy synchronous interface

hi experts,
can you suggest me how to do this scenario?
Web Service ABAP proxy synchronous interface.

hi,
you can create a web service on XI
which will call ABAP proxy (on ERP, SRM etc)
in a synchronous way (you just need to generate the proxy class
in TCODE SPROXY)
then you can fill the method of your generated proxy class
and you will have WS - ABAP proxy interface
have a look at this to undrstand server proxy:
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

RFC - Java Proxy (Synchronous) invoking method

Hi,
I have problems to call my inbound java proxy.
My scenario consist of send RFC -> Java Proxy (Synchronous)
Proxy this registered
http://hcp095.intra.csc.es:50100/ProxyServer/register?ns=http://csc.es/xi/rca&interface=Z_RCA_SCS&bean=ZRCASCS_PortTypeBean&method=zRCASCS
ejb-jar.xml:
<ejb-jar>
 <description>EJB JAR description</description>
 <display-name>EJB JAR</display-name>
 <enterprise-beans>
 <session>
 <ejb-name>ZRCASCS_PortTypeBean</ejb-name>
 <home>com.sap.aii.proxy.xiruntime.core.AbstractProxyInboundHome4</home>
 <remote>com.sap.aii.proxy.xiruntime.core.AbstractProxyInboundRemote4</remote>
 <local-home>com.sap.aii.proxy.xiruntime.core.AbstractProxyInboundLocalHome4</local-home>
 <local>com.sap.aii.proxy.xiruntime.core.AbstractProxyInboundLocal4</local>
 <ejb-class>es.csc.xi.rca.ZRCASCS_PortTypeBean</ejb-class>
 <session-type>Stateless</session-type>
 <transaction-type>Container</transaction-type>
 </session>
 </enterprise-beans>
</ejb-jar>
Class Impl:
package es.csc.xi.rca;
public class ZRCASCS_PortTypeImpl extends AbstractProxy implements ZRCASCS_PortType {
public ZRCASCSResponse_Type zRCASCS(ZRCASCS_Type parameters) throws ZRCASCSException_Message_Exception, SystemFaultException, ApplicationFaultException{
 //throw new RuntimeException();
 Rca_ws a = new Rca_ws();
 return a.zRCASCS(parameters);
Error: XI_Monitor
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Error invoking method zRCASCS of proxy bean $Proxy305: cannot assign instance of com.sap.guid.GUID to field com.sap.aii.proxy.xiruntime.core.MessageSpecifierImpl.guid of type com.sap.guid.IGUID in instance of com.sap.aii.proxy.xiruntime.core.MessageSpecifierImpl: com.sap.aii.proxy.xiruntime.core.XmlInboundException: Error invoking method zRCASCS of proxy bean $Proxy305: cannot assign instance of com.sap.guid.GUID to field com.sap.aii.proxy.xiruntime.core.MessageSpecifierImpl.guid of type com.sap.guid.IGUID in instance of com.sap.aii.proxy.xiruntime.core.MessageSpecifierImpl</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
Error: defaultTrace
#hcp095.intra.csc_XID_19271950#ANGUZMAN#ec20b7f019f611de98340011259e6830#
SAPEngine_Application_Thread[impl:3]_36##0#0#Error##Plain##
#com.sap.aii.proxy.xiruntime.core.XmlProxyException: Error invoking method zRCASCS of proxy bean $Proxy366:
cannot assign instance of com.sap.guid.GUID to field com.sap.aii.proxy.xiruntime.core.MessageSpecifierImpl.guid
of type com.sap.guid.IGUID in instance of com.sap.aii.proxy.xiruntime.core.MessageSpecifierImpl
 at com.sap.aii.proxy.xiruntime.core.XmlProxyJ2EE.call(XmlProxyJ2EE.java:192)
 at com.sap.aii.proxy.xiruntime.core.XmlProxy$ProxyBeanCaller.call(XmlProxy.java:225)
 at com.sap.aii.proxy.xiruntime.core.XmlProxy.processRequest(XmlProxy.java:194)
 at com.sap.aii.proxy.xiruntime.core.XmlInbound.processRequestMessage(XmlInbound.java:126)
 at com.sap.aii.proxy.xiruntime.core.XmlInbound.processMessage(XmlInbound.java:83)
 at com.sap.aii.proxy.xiruntime.sbeans.JPRBean.onMessage(JPRBean.java:158)
 at com.sap.aii.proxy.xiruntime.sbeans.JPRLocalLocalObjectImpl0_0.onMessage(JPRLocalLocalObjectImpl0_0.java:175)
 at com.sap.aii.af.ra.ms.impl.ServicesImpl.deliver(ServicesImpl.java:276)
 at com.sap.aii.adapter.xi.ms.XIEventHandler.onDeliver(XIEventHandler.java:1049)
 at com.sap.aii.af.ra.ms.impl.core.queue.RequestConsumer.onMessage(RequestConsumer.java:119)
 at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:850)
 at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(AccessController.java:180)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
If somebody can help me.
Thank you very much

Solved!!!
to assign library references to the project application-j2eeengine.xml
com.sap.aii.proxy.xiruntime
com.sap.aii.messaging.runtime
com.sap.xi.util.misc
com.sap.guid

CANNOT_READ_PALOAD error with SOAP to PROXY Synchronous interface

Hi,
Problem with SOAP to PROXY Synchronous interface.
In Production client, some times we are getting the below shown error in SXMB_MONI. There is no Inbound payload also.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">CANNOT_READ_PAYLOAD</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Unable to read payload from the message object</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Please suggest me to resolve this.
Thanks in advance,
Hari.

Hi Hari,
In your case, check SAP Notes: 1082111 and 1060723.
Regards,
P.Rajesh

SAP PI 7.4 SOAP - ABAP Proxy Synchronous Webservice

Hi Everyone,
I am developing the following scenario:
3rd party makes a SOAP call to SAP (via PI) to determine whether a vendor exists or not in the SAP system. The link for the call is provided by us from the Integrated Configuration.
The request comes in, calls an ABAP Proxy to check if a vendor exists and sends a response back to the SOAP call with a 'Y' or an 'N'.
I've read a lot about various scenarios but I'm having trouble connecting the dots as I'm fairly new to PI. I'd appreciate any help.
I've made the following set-up based on assuming I need separate Service Interfaces for the SOAP Request & Proxy Response
ESR
1. Message Types
     SOAP (MT_SOAP_REQ & MT_SOAP_RESP) - PROXY (MT_PRXY_REQ & MT_PRXY_REQ)
2. Message Mappings
     MM_REQUEST    which maps MT_SOAP_REQ   to MT_PRXY_REQ)
     MM_RESPONSE which maps MT_PRXY_RESP   to MT_SOAP_RESP)
3. Service Interfaces (Synchronous)
    (SOAP Request)
    SI_IN (Inbound Interface)       with Request = MT_SOAP_REQ and Response = MT_SOAP_RESP
   (Proxy Response)
    SI_OUT (Outbound Interface) with Request = MT_PRXY_REQ and Response = MT_PRXY_RESP
4. Operation Mapping
    OM_LOOKUP which maps SI_IN to SI_OUT with Request    (MT_SOAP_REQ to MT_PRXY_REQ)
                                                                    and Response (MT_SOAP_RESP to MT_PRXY_RESP)
I create the ABAP Proxies for each Service Interface. SI_IN contains the required coded method to check if there is a vendor.
I create the webservice and binding for SI_IN in SOAMANAGER
At this point I'm somewhat unsure - what do I need to do for SI_OUT ? Do I need to create a logical port ? how is SI_OUT associated to SI_IN (apart from the Operation) to get the response.
ID
In the Integration Directory I've created a SOAP_SENDER communication channel for System A and SOAP_RECEIVER channel for SAP. For the SOAP Receiver I need to specify a URL - what should this be ? Is it meant to point to the web service for SI_IN in SICF or just to the generic http://host:8000/sap/xi/engine?type=entry
Do I need to use the HTTP_AAE adapter for the receiver instead of SOAP ?
I created an Integrated Configuration for the SI_IN Service Interface with comm channel SOAP_SENDER from System A and SOAP_RECEIVER for SAP backend. I then got the WSDL for this to provide to the 3rd Party to test (via SOAP UI) . Again my concern is how is the SI_IN linked to the SI_OUT to achieve the response ?
I appreciate you taking the time to go through this . Any help is greatly appreciated.
Thanks very much
Gary

I create the webservice and binding for SI_IN in SOAMANAGER
At this point I'm somewhat unsure - what do I need to do for SI_OUT ? Do I need to create a logical port ? how is SI_OUT associated to SI_IN (apart from the Operation) to get the response.
>>>>No need to do anything in SOAMANAGER
Do I need to use the HTTP_AAE adapter for the receiver instead of SOAP ?
>>> No. Soap adapter is fine. Configure your receiver channel as explianed in the below blog (section 4.3)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?overridelayout=t…
Again my concern is how is the SI_IN linked to the SI_OUT to achieve the response ?
>>>>Your receiver determination and interface determination takes care of this.(receiver interface & outbound processing tabs in ICo)

Message flow in SAP PI 7.31 JAVA only for ABAP Proxy synchronous scenario with Oracle DB

Dear Experts,
I am working on a synchronous scenario Sender ABAP Proxy <===> SAP PI 7.31 JAVA only <===> Oracle Database.I have successfully
configured all the proxy configurations as well both Sender SOAP and JDBC receiver channels are showing no error when pinged from
Cc monitoring in NWA.
1.During testing at Tx SPROXY , I am triggering a message and after 5 minutes I receive an PARSING error message with 2 messages in ECC
local IE i.e. Tx SXMB_MONI.
Note : In NWA , I can see only 1 message that too in cancelled status.
2.Seeing the trace of the messages I assume that the messages have not moved from sender ECC system. I am still confused with flow of message
from the Message Audit log. Audit log of error messages.Could any one share the full Audit log of a successful message generated in SAP PI 7.31 JAVA only.
3.I observed that the QIN Scheduler status in ECC is in INACTIVE status. There is no queue id for 2 messages generated in ECC. Does
it should in ACTIVE status in Tx SMQR..
Regards
Rebecca

Hi Thomas,
Valuable inputs..
1. Since I don't have any audit log for successful message, would you be able to share referring to the
below screenshot whether the message was put into receiver JDBC adapter and JDBC adapter tried to retrieve the Select response from Oracle Database.
2.I have done some setting in Advance mode of the receiver JDBC to increase the time out and other parameters as per SAP note but still the issue is same. If you perhaps have some experience in such scenarios, please share some input so that I can ask the Oracle Database administrator exactly what is required from our side.
3.Regarding the slow response from Oracle , there was some suggestion that the datatype of the request and response should match the column name of the Oracle database. I did that.. Do you have any more suggestion that may be hampering the generation of the response message from the Oracle like SAP note or document.
Regards
Rebecca

Inbound Proxy synchronous implementation

Hi Experts,
I am newbie to ABAP proxy implemenation.I have to implement Inbound Synchronous ABAP Proxy. The preface looks like below.
 (a-> DT_Sender_Req) (b-> DT_Receiver_Req)
.Net App -
> SAP PI7.1 -
> SAP ECC6.0
 (<-d DT_Sender_Resp) (<-c DT_Receiver_Resp)
.Net application will send the purchase order and will fetch the PO details from SAP ECC6.0.The response will be send back to .Net application.To implement this , synchronous message is to be configured. I have query regarding the XI scenario configuration. Please guide on the following.
1. For .Net application, I have to get the message structure i.e. WSDL from the respective team.What all
 details I have to get from .Net team?
2. Which adapter I can use for message exchange with SAP-PI?
3. Do I have to create 4 data types(DT)
 (a) : DT_sender_Request
 (b) : DT_Receiver_Request
 (c) : DT_Receiver_Response
 (d) : DT_Sender_Response
 Should message in flow (a) and (b) have the same message structure
4. For catching the exception in SAP ECC6.0, what would be the Fault Exception structure in (c)?
Request experts to post the answers making reference to the question numbers i.e. 1,2,3,4 etc
Regards
Alice Rebecca

Alice@xi wrote:
Hi Experts,
>
>
> I am newbie to ABAP proxy implemenation.I have to implement Inbound Synchronous ABAP Proxy. The preface looks like below.
>
> (a-> DT_Sender_Req) (b-> DT_Receiver_Req)
> .Net App -
> SAP PI7.1 -
> SAP ECC6.0
> (<-d DT_Sender_Resp) (<-c DT_Receiver_Resp)
>
>
> .Net application will send the purchase order and will fetch the PO details from SAP ECC6.0.The response will be send back to .Net application.To implement this , synchronous message is to be configured. I have query regarding the XI scenario configuration. Please guide on the following.
>
> 1. For .Net application, I have to get the message structure i.e. WSDL from the respective team.What all
> details I have to get from .Net team?
You will need to understand the data structure and thus create a sync. outbound interface and then share the WSDL with them
>
> 2. Which adapter I can use for message exchange with SAP-PI?
>
This will be a SOAP to Proxy scenario so use the SOAp adapter at the sender side and XI adapter at receiver
> 3. Do I have to create 4 data types(DT)
> (a) : DT_sender_Request
> (b) : DT_Receiver_Request
> (c) : DT_Receiver_Response
> (d) : DT_Sender_Response
yes 4 DT
> Should message in flow (a) and (b) have the same message structure
Depends. If they are different, you mapping can handle the transformation.
> 4. For catching the exception in SAP ECC6.0, what would be the Fault Exception structure in (c)?
>
> Request experts to post the answers making reference to the question numbers i.e. 1,2,3,4 etc
>
> Regards
> Alice Rebecca
Yes use fault messages.
Additional references:
Walkthrough - SOAP XI RFC/BAPI
Fault messages -
Fault Message Types - A Demo (Part 1)
Handling Web Service SOAP Fault Responses in SAP NetWeaver XI

ABAP Proxy synchronous call to webservices

Hi,
I have the following synchronous scenario.
SAP R/3 outbound proxy <-> SAP XI <--> Webservices.
When I try to execute the proxy Execute synchronous,I am getting the following exception caught.
CX_AI_SYSTEM_FAULT.
What could be the possible reason for the exception to be thrown?
Thanks,
Leo

Hi,
This exception is thrown when there is an error in XI in a sync call.
What does your message display show in SXMB_MONI in XI ?
Kind regards
Colin.

Werb services to proxy- synchronous scenario

Hi experts,
Can anyone help me with the detailed scenario of synchronous WEB SERVICES TO PROXY step by step. I tried searching in sdn but no luck.
Also tell me here that XI will expose the Outbound Interfaces as a Web Service Interface. how the Web Service Description (WSDL File) will be generated for the Interfaces in Integration directory?
Also mapping is not required here.
Thanks
Veeru

what types of business systems have to create for this webservices to proxy kind of scenario
you dont need multiple business systems....just create one business system in SLD and then import it into ID.
Assign the inbound message interface to this business system and configure your scenario.
Check if a Business System already exists for this SAP system....if there is another Proxy/ IDOC/ RFC scenario developed for this SAP system then there should be a Business System created...just re-use the same.
If you need help on how to create SLD then just make a simple search on SDN.....you will find good blogs/ documents.
On the Sender side (WS) you need to create Business Service in ID.
Regards,
Abhishek.

File to Proxy Synchronous interface help

Hi guys/experts,
I have file to proxy scenario.
I have created the objects in IR. When coming to ID, i got stopped in receiver agreement.
Followings are the IR objects
Data Types
DT_File_Send - Sending data
DT_File_Receive - Receive response data
DT_Prxy_Receive - Proxy receive
DT_Prxy_Response - Proxy response data
Messsage Types
MT_File_Send - Sending data
MT_File_Receive - Receive response data
MT_Prxy_Receive - Proxy receive
MT_Prxy_Response - Proxy response data
Message Interfaces
MI_File - Outbound - Synchronous
 OUtput Message - MT_File_Send
 Input Message - MT_File_Receive
MI_Proxy - Inbound - Synchronous
 Input Message - MT_Prxy_Receive
 Output Message - MT_Prxy_Response.
Message Mapping
MM_File_2_Proxy
MM_ProxyResponse_2_File
Interface Mapping
IM_File_Proxy
When coming to the intergration directory, i am able to create the objects for File to Proxy direction, but for the resposne from the proxy, when i try to create the receiver agreement, i am not able to select the message interface.
Can anybody pls advise me how to complete the response direction..
Thanks in advance
Mani.

When coming to the intergration directory, i am able to create the objects for File to Proxy
direction, but for the resposne from the proxy, when i try to create the receiver agreement, i am not able
to select the message interface.
check if your development is as per this wiki:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file%2528without+bpm%2529&
In this wiki the flow is FILE <-->XI <-> RFC .....while yours is FILE <> XI <---> PROXY......so the sender is the same....just replace the RFC with your Proxy and check.
Regards,
Abhishek.
Edited by: abhishek salvi on Jun 9, 2009 4:00 PM

ABAP Proxy synchronous interface - access to payload

Hi,
I have a scenario from ABAP Proxy -> XI -> Web Service.
On occassion, there is an issue with calling the Web Service (unavailable for instance) and an exception is returned to the ABAP Proxy for a SystemError.
I am able to catch this exception in the proxy and output the error - for example HTTP.Exception.HTTP.Adapter.
However, I also want to use information in the response payload to output on the error as the payload contain infrmation on why the error was thrown in the target application - for example - Format of data xxx is incorrect.
I can get access to the request payload using interface/class IF_WSPROTOCOL_PAYLOAD=>GET_SENT_REQUEST_PAYLOAD but there does not seem to be an equivalent for GET_RECEIVED_RESPONSE_PAYLOAD !
Have anyone done this before - use payload information in an ABAP proxy from the response payload ?
Kind regards
Colin.

Hi,
I will need the actual payload info not the status.
I will have to debug SXI_MONITOR in CRM to see how it is obtained.
Thanks
Colin

Calling abap proxy synchronous ...

Hi everyone.
I have this scenario.
abap proxy (request) -
> XI (BPM) -
> abap proxy (response).
I'm able to send async the data using the proxy and i would like to send the response to other proxy.
The best scenario for me would be if the proxy in sync, the BPM do some checks and finally, sender proxy returns the values.
any idea of how to do this two scenarios?
Regards,
Inigo.

Hi,
>>>abap proxy (request) -
> XI (BPM) -
> abap proxy (response).
are you sure that processing inside the BPM will take less then 30 sec?
if not why do you want a syn call ? do you use this sync proxy call
from an online report in r3 ?
if you don't need a sync report do it in an async way:
proxy - BPM - proxy (which writes the results to a table)
and then from your report you can read from that table...
one of the possibilities
Regards,
michal

Soap to proxy - synchronous error

hi
i am working on soap to proxy scenario.
i am getting an error in message monitoring
Exception caught by adapter framework: com.sap.aii.af.sdk.xi.srt.BubbleException: System Error Received. HTTP Status Code = 200: However System Error received in payload ErrorCode = DYNAMIC_CALL_FAILURE ErrorCategory = XIProxy Parameter1 = Parameter2 = ZCL_SI_SALES_ORDER_CREATE1 Parameter3 = SI_SALES_ORDER_CREATE Parameter4 = Additional text = ErrorStack = Error during proxy processing
Message E TD 604 cannot be processed in plugin mode HTTP
[http://sap.com/xi/XI/Message/30^Error "DYNAMIC_CALL_FAILURE"]
what could be the issue in it ?

Hi
It is data issue, you need to debug the proxy for more detail about this error. Take the payload and debug the proxy in SPROXY. Also check below sap note.
1876952 - XI runtime: Determining dump in receiver system
Regards,
Praveen.

Proxy Synchronous

Similar Messages

Maybe you are looking for