Proxy to MQ scenario

hello
I would like to develop an interface proxy to MQ.
I would like that the data that enter to the MQ, will enter as a flat file
and not in XML format.
I think it is in the configuration in the model, but didnt find what.
if any one know how to configure the comm. channel (MQ and Proxy)
it will be very helpfull.
Thanks
Kfir

http://www.****************/Tutorials/XI/ABAPClientProxy/page1.htm
all step by step for proxies

Similar Messages

Error in SOAP receiver channel in Synchronous Proxy to SOAP scenario

Hi all,
We are experiencing an issue with a synchronous Proxy to SOAP scenario. Getting below error message in the SOAP receiver communication channel for the response message.
SOAP: Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: com.sap.aii.utilxi.misc.api.ResourceException: Could not determine mapping steps for message 1364b76e-ecbf-11e4-85f4-000023acfde6.
We are running PI 7.4.
Any help is appreciated.
Thanks,
Pushpa

Hi,
Seems the Receiver Webservice is not reachable. Did you try to test it using SOAP UI tool.
1. Test a fresh message from local SOAP UI tool.
2. Pick 3rd party WSDL file and Import in SOAP UI tool.
3. Put some dummy data for mandatory fields
4. Trigger it msg and ckh if you get successful / response msg.
5. Check if firewall is open and that URL is not blocked.
Hope it helps
Regards,
Azhar

Error in Proxy to File scenario

Hello All,
I m doing Client Proxy, ABAP proxy to file scenario.
I hv done all the configurations in IR & ID.
I hv also created proxy in sender R3 system.
But messages are not going successfully from R3.
when i checkin SXMB_MONI of R3 i get following error
<SAP:Stack>Error when receiving by HTTP (error code: 110, error text: )</SAP:Stack>
Message is in SYSFAIL status in SMQ2.
Any clues how it can be solved??
Thanks in adv.
Mahi

Hi Maheshwari,
Please try as mentioned below
Option 1: Go to SXMB_ADM->Manage Queues and Deregister all the Queues.Use transaction SMQR or SMQ2 to reset the status of queues
For this to initiate processing of messages stuck in the queue, make sure to set following IS configuration parameter
MONITOR QRFC_RESTART_ALLOWED to value 1
Option 2: Check the user associated with the RFC destination AI_RUNTIME_JCOSERVER in sm59 transaction. It is generally SAPJSF. Might be posisble the user password is expired or locked. Log on to j2ee admin tool on the server side and update the password and then see if it works.
Thanks
Amit
Reward points if answer is helpful

Error on PROXY to FILE scenario

Hi,
I'm working on a Proxy to FIle Scenario. 1 Proxy is triggered and 7 files should be generated at the target side.
Now when the proxy is triggered all the 7 files doesn't get generated. Instead randomly some 3-4 files are getting generated.
Could not see the rest of the entries in MONI also.
Can someone tell how to monitor this and where exactly to check for the error, as message doesn't reach the MONI and we don't have a sender channel beacuse its Proxy.
Thanks,
Vikas

Vikas,
Can someone tell how to monitor this and where exactly to check for the error, as message doesn't reach the MONI and we don't have a sender channel beacuse its Proxy.
> how 7 files will generate ?
From Proxy level @ ECC it don't seems logical/possible as whole data will be passed as a whole to proxy interface and on some condition basis only you would be creating 7...files . so definitely at SXMB_MONI of XI you can see this .
Try to increase trace_level parameter to 3 (only in development box , as it will consume the server very fast) for better monitoring .
Since the no. of files will be created by file adapter only so those many no. of receiver file adapter calls you can see at RWB.
Regards,

Error in synchronous( abap proxy to soap)scenario

Hi experts,
My scenario is synchronous abap proxy to sysnchronous soap. for proxy I am using business system name as ERDCLNT220 and soap business system name as BS_HRS_DEV
configuration steps are
1. only client proxy to soap scenario I have done.
communication channels: only receiver soap adapter. no proxy sender communication channel for client proxy.
Already we have RFC destination connection and connection type H for proxy to xi.
1.Is it required RFC destination connection for xi to server proxy.
2.Is it required receiver proxy communication channel for server proxy?.
i HAVE TESTED THIS INTERFACE. I am able to send the request. But I am not able to receive the response from soap webservice message .
error is:
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson. Setting message to status failed.
Kindly help me.
advance thanks
thanks and regards
elton
Edited by: eltonsaranya on May 9, 2011 10:27 AM

Your exception message shows problem at the webservice side.
Check the following:
a) you need two mappings one for proxy req to soap request and other soap response to proxy response
b) You need to create service interfaces both sender and receiver synchronous .
c) communication channel QOS is best effort for both sender and receiver
d) I dont see problem in soap configuration. Bcuz you are able to ping and while getting response from the method getPerson it fails.
f) See your SOAP response structure matches with WSDL provided.
g) You can also test outside PI.. I meant testing via soap client tool like SOAPUI for that web service. So that you know whether problem exists on the target system or not.
Hope that helps.

Proxy to file scenario

Hi SDN,
I have a query regarding a Proxy to File scenario. Whenever the ABAP proxy populates the structure an d sends the data accross to XI to genarate a file structure, then how does it confirms that the structure is sent to SAP.XI or to somewhere else? How is the confirmation done? and where is it done at Sender side or at the XI side?
Thanks,
Aniruddha

Hi,
>>>How is the confirmation done?
if you do not set ack request it does not do any confirmation - you only see the successful flag in ECC and in PI
nothing more
Regards,
Michal Krawczyk

Proxy to File scenario - IDOC as an flat file

Hi,
I am working on ABAP Sender Proxy to File scenario. The target structure in the message mapping is SHPMNT05 IDOC and the output of the file needs to be in the text format and then the file will be send to an EDI subsystem.
Currently, EDI subsystem gets the IDOC from ERP system as a flat file and expects the similar kind of file from XI system
The requirement is to have all the fields of the IDOC in the target file. If data does not exist for a particular field, then there should be a space for that field in the text file.
I would like to know if there is any other standard way of executing this scenario apart from using File Content conversion. In case if we have to use FCC, how difficult it would to be implementing the scenario. Please note that the output file needs all the fields of IDOC in it.
Regards,
Sakthi
Edited by: Sakthi on Sep 26, 2008 11:24 AM

Hello Sakthi,
By coding in proxy populate the idoc structure if it is difficult to handle thru Content conversion parameters then create an intermediate structure and populate that structure by concatenating the fields from idoc segments. If the fields are not having the values then add blank spaces as per length of the field.
You can configure the file channel and content converison parameters for the intermediate structure.
Hope it will helps to you.
Cheers
Veera

ABAP client proxy to File scenario

Hi,
I am doing ABAP client proxy to File scenario.
I have followed Ravikumar allampallam blog i.e https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1387. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
My abap proxy has successfully created 4 objects:
1)ABAP Class ( ZCO_ MIOA_ABAP_PROXY).
2. Structure for the message type in ABAP Data Dictionary (ZMT_PROXY).
3. Structure for the data type in ABAP Data Dictionary (ZDT_PROXY_SRC).
4) Table type (ZSTRING_TAB).
can u tell me how can i fetch data from database table into structure?

Hi,
see first create the data type,msg type, msg interface and go to R3 instance of Xi and use SPROXY transaction , locate your SWCV,namespace, intreface ( outbound) and create the proxy , later give the name starts with z, later in ABAP program create the internal table of type of the Structure for the message type in ABAP Data Dictionary (ZBLOGEMP_PROFILE_MSG )
so follow the code and explained about each ob, structure of Msg ..
Regards
Chilla

Outbound Proxy - XI - File scenario. Outbnd proxy not callin XI.

Hi All,
I have a requirement where I have to develop a Outbound Asynch Proxy-> XI -> File scenario.
For this I have crated an Outbound Asynch proxy and called this proxy from a report in ABAP.
When I execute the report, i am unable to see the message in XI Moni.
But when I try to emulate the same scenario by passing a message from the RWB Test Page, the message is flowing to the file successfully.
It seems that the problem is just that the ABAP report is unable to call the XI by executing the outbound proxy method.
The code for the report is as below:
*& Report Z_ASYNCH_PROXY
REPORT Z_ASYNCH_PROXY.
data prxy type ref to ZFUJCO_SI_TEL_NUM_RFC_RESP_ASY.
data out type ZFUJMT_TEL_NUM.
out-MT_TEL_NUM-TEL_NUM = 'test_proxy'.
create object prxy .
TRY.
CALL METHOD prxy->si_tel_num_asych_in
EXPORTING
    output = out
commit work.
CATCH cx_ai_system_fault .
   DATA fault TYPE REF TO cx_ai_system_fault .
    CREATE OBJECT fault.
    WRITE :/ fault->errortext.
ENDTRY.
Please tel me how to find out that where the message is getting stuck and resove this.
regards,
Piyush

Hi All,
Thanks a lot for ur inputs.
i was able to resolve it.
The pointers are:
- The message was gettting stuck in the queues XBTS0009 of the Bus system. I chekced it in SXMB_MONI of bus syst.
- i activated the queues usung SXMB_ADM -> manage queues
- The HTTP destinatin was not maintained for the connectino to the PI Url. In fact the url was hardcoded in the sicf -> xi-> engine
I maintained this using
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID1803326050DB10288658103888810737End?blog=/pub/wlg/3022
Thanks for all your help.
regards,
Piyush

Pipeline error for abap proxy to IDoc scenario

hi experts,
i am getting the following system error in moni for my proxy to idoc scenario.
In error it shows :
"Receiver service cannot be converted into an ALE logical system"
but i have checked adapter specific attributes of both receiver
and sender sys and they both have logical systems ( SO this is not the problem)
TRACE
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
pls suggest .
Appropriate points will be awarded

Hi,
Copy the payload from moni and test the mapping.
The error may be due to XML file generated by sender channel is not proper.
and also look at this blog
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Please reward points if it helps
Thanks
Vikranth

Proxy to JMS Scenario: switch from sync to async proxy,does it makes sense?

Hi @all,
i've implemented a sync proxy to JMS scenario that works well. Backend is ECC 6.0 and Middleware is PI 7.1.
Business Case: Run a request with a number and get a response back with a corresponding entry for the number. That means, there is always a response expected.
Now the following thing appears: the receiver system could not handle many calls at one time (200 calls are planned at each run), the calls reduces the performance. Now gys at receiver system likes to develope a buffer of 10 seconds between the requests to handle some kind of load balancing with that. That means for the request that it the response takes +10 seconds back to backend. It is also possible to handle that in SAP backend with a waiting-statement in coding, so there is no need to go from sync to async - but the customer requested us to implement this scenario in async.
JMS is always async, I know. But the Service Interfaces for Inbound and Outbound are of mode sync - so I can call my outbound Interface class in backend with Importing Output and Exporting Input.
My question is: makes it sense to go from sync to an async scenario?
And how looks the coding in backend for the response? I guess that it only makes sense to switch to async when no response entry is needed (example: for write operations).
Thanks in Advance,
Stefan

> But in case of switching, what is the best way?
> Should I implement 2 senarios? Or is it ok to switch the Inbound and Outbound Service Interface from sync to async?
I don't think you need 2 scenarios for this. Just one is enough with different RDs.
Over all in this case you have to re-create/modify the service interfaces and also you have to create 2 interface mappings. You have to also create the new inbound and outbound proxies since service interface mode will be changed. For outbound proxy the code can be reused and for inbound proxy also logic and code can be taken from your old code.

Proxy to file scenario - strange error

Hi,
we r finding a strange error occurring in our prd system. we have many scenarios of proxy to file and they all are running fine. the problem which is arising from the last few days is that - for some outbound interfaces at random, the message is generated in ECC, sent to XI and its file generated in local system of XI - this is fine - but what is happening as strange is the message is again getting processed in SMQ2 queue of ECC - this is the duplicate msg of the original msg - we can say this is duplicate msg becoz the msg id of the original msg in ECC, is available in XI with the same msg id and this erroring msg in SMQ2 is having the same msg id again - suggesting that somehow ECC is trying to process the same msg again.
has anyone seen this type of error before. pls suggest how to rectify this error.

hi,
no upgrade happened recently.
in ECC in SMQ2 queue the msg is erroring with error XI server CLIENT_RECEIVE_FAILED. INTERNAL Queue stopped. In SXMB_MONI in ECC the msg is erroring with :
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>402</SAP:P1>
<SAP:P2>ICM_HTTP_TIMEOUT</SAP:P2>
Error while receiving by HTTP (error code: 402, error text: ICM_HTTP_TIMEOUT)
the scenario is async outbound proxy to file scenario. it is happening randomly for any interface and only a few times eg 1 msg out of 300 msg in a day is having this duplicate msg error.
Please suggest.

Proxy to file scenario issue

Hi,
I am trying to configure a Proxy to file scenario.
My sender service is ERP system and the my receiver is PI file system.
These are the steps I followed:
1. Created a sender business system for Web AS abap (my ERP system)
2. Created a receiver business system for third party (my PI system)
3. I created all the interface objects(datatype, message type, message interface etc) in Integration repository.
4. In the ERP system , I configured http connection of type h to PI system and also configured lcrsaprfc, sapsldapi connections of type t. I followed this blog: How do you activate ABAP Proxies?
5. I also configured the ERP system as local integration engine, by setting the role to application system in sxmb_adm (followed the above blog).
5. Now I generated proxy in sproxy transaction for the outbound interface.
6. Then I created the communication channel, receiver agreement, interface determination and receiver determination in Integration directory.
7. I created a abap program to call the execute_asynchronous method.
Now the issue is, when I execute my report, nothing happens. I can see the success xml message in sxmb_moni in ERP system. No message is seen on the PI's sxmb_moni. The file is not written either to ERP or PI systems.
Since I am new to PI, I am not sure where to begin with.
If anybody can help that would be great.
Thanks
MLS

Hi
Check the following
1. RFC connection between R/3 and PI
2. You said Business system of type third party (PI) is receiving it. Try Business system standalone Java. If PI system is already defined in Landscape as Integration server. It will not show any message output.
3. message is shown in sxmb_moni in your ERP that measn proxy is able to receive all objects and passed it from there.
4. Check in SMQ2 outbound queue of ERP as well as inbound queue for PI if message exist.
5. While configuring in ID you dont need a sender agreement. Did you created one.
Thanks
Gaurav

Proxy To file scenario : need the output in hierarchial structure

Hi all,
I am doing a proxy to file scenario. Now I am getting the output as :
<documents>
<document>
<header>
<delivery_number></delivery_number>
<tax_number/>
u2026
</header>
<data>
u2026
</data>
</document>
<document>
<header>
u2026
</header>
<data>
   u2026
</data>
</document>
u2026
</documents>
But I would like to change the output to below structure.
<documents>
           <document>
     <header>
                             <delivery_number></delivery_number>
                             <tax_number/>
                              u2026
                     </header>
     <data>
                                 u2026
                      </data>
           </document>
           <document>
     <header>
                             u2026
                      </header>
     <data>
                            u2026
                     </data>
             </document>
u2026
</documents>
Can anyone suggest me how can I get this?
Thanks,
Arivarasu S
Edited by: Arivarasu S on Jan 31, 2011 2:54 PM
Edited by: Arivarasu S on Jan 31, 2011 3:00 PM

<documents>
      <document>
            <header>
                       <delivery_number></delivery_number>
                        <tax_number/>
                                  u2026
             </header>
             <data>
                        u2026
              </data>
       </document>
</documents>
I need the output as mentioned above.. pls let me know how can i achieve this..
Thanks,
Arivarasu S
Edited by: Arivarasu S on Jan 31, 2011 6:59 PM

Proxy to File Scenario Steps

Hello everybody-
I am trying a proxy to File scenario, Its from SRM-XI-File , i have followed the blog
Learning XI
but the question i have is, if iam sending a invoice from SRM to XI , what are the configuration steps that i need to do in SRM and in XI, i mean how do i configure proxy in SRM?(in that matter any source system), Can someone tell me the configuration steps that need to be done in SRM and XI to use proxies.

Venkat
Instead of using proxies for sending invoice from SRM use IDOC's. There are idocs aviable to do this activity. But if u are going to recive a response then u might think of proixes as idocs supports only asyn interface. for large data voumens make use of proxies.
Go through SRm master guide that gives you details of Standard Interface available.
service.sap.com/installation
and then goto SRM - Master Guide
also
SRM, like many other mySAP Business Suite applications, provides standard XI Content. You can download that content from here:
http://service.sap.com/swdc then
Support Packages and Patches->SAP Application Components->SAP SRM (WITH SAP EBP)
Then you go to the specific content version, depending on what SRM release you're on. also u can check with:
http://service.sap.com/~sapidb/011000358700002897402004E/ServiceProcurementNEW.pdf
http://service.sap.com/~sapidb/011000358700002897382004E/Plan-DrivenwithSInew.pdf
http://service.sap.com/~sapidb/011000358700002897342004E/CCMConfig10_01_05.pdf
http://service.sap.com/~sapidb/011000358700003992672005E/Config_Guide_CCM200_640doc.pdf
NOTE: There are some preconfigured mappings available for SRM in www.service.sap.com. Check out this thread
Is there pre-configured message mapping for SRM Content?

Proxy-to-File scenario (Turkish Characters Encoding)

Hi All,
I have a Proxy to File scenario. (No Message Mapping...As the data is processed and sent as it is)
The input data to PI contains Turkish characters, and the File getting generated at FTP location is converting some of those characters into special characters while I am using the encoding as "cp1252" in the Processing tab under "File Encoding" option of the Receiver File channel.
e.g. :
1)
i/p - MİA L poşet
o/p - M?A L po?et
2)
i/p - İstanbul-Ankara gidiş dönüş uçak bileti
o/p - ?stanbul-Ankara gidi? dönü? uçak bileti
As in the above examples, at the o/p side it is converting some charactres into "?"
Could you please suggest the correct encoding used/steps to be followed in this case.
Thanking you in advance.
Thanks and regards,
Neetish

Hi Amit,
I tried with cp1524.
Now it is giving me
1)
i/p - MİA L poşet
o/p - MÝA L poþet
2)
i/p - İstanbul-Ankara gidiş dönüş uçak bileti
o/p - Ýstanbul-Ankara gidiþ dönüþ uçak bileti
The "?" is now replaced with "Ý"
Please suggest.
Thanks.
- Neetish

Proxy to MQ scenario

Similar Messages

Maybe you are looking for