Proxy to soap : async

Hi
Wanted to understand if we have a async comm : proxy to soap and suppose the target system goes down while we transmit proxy data. If it is an async scenario ,it will error out in moni and an alert can be generated but this interface has to be again triggered from the source system ,SAP to send proxy data again ? is my understanding correct ?
wanted to understand in async scenario how can this be automated ? suppose target is down async scenario needs to be triggered again.
Thnx

aync proxy to SOAP -> if the target system is down, the message will come into PI and will be persisted.
By default the adapter engine tries to redeliver the message to the target 3 times. if after these default times it is unsuccessful it will go to error and will be persisted in PI. At any point when the target is up you can go to rwb and manually reprocess the message.
you can also control the redlivery - /people/shabarish.vijayakumar/blog/2010/03/31/did-you-know--delivery-attempts-customizable-per-communication-channel

Similar Messages

System Error in Message Monitoring -Proxy to SOAP async scenario

Hi All,
My scenario is ABAP Proxy---> SAP PI 7.1 ---> WEbService(Asynchronous SOAP ).
In Moni message is showing successful Flag, but message has got stuck in "system Error" at message monitoring.I can't see any Audit log in Message monitoring .
but in related Soap Receiver communication channel i can see the below Error
"2010-08-11 09:54:15 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Information SOAP: sending a delivery error ack ...
2010-08-11 09:54:15 Information SOAP: sent a delivery error ack
2010-08-11 09:54:15 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005. "
Please help , what could be the problem.
Thanks in Advance.
Jyoti

Hi Jyoti,
>Is there any specific setup required at Provide side while moving to Acceptance system
I dont think so.
Please compare EXACTLY the settings of the two Comunication Channels, especially the server path. Please assure that you ve sent exactly the same message content from Acceptance system.
Regards,
Udo

Acknowlegment in Client Proxy to SOAP Async Scenario

Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
ECC -> PI -> Legacy CRM
I have few threads everyone is posting the following link:
http://help.sap.com/saphelp_nw04/helpdata/EN/f4/8620c6b58c422c960c53f3ed71b432/frameset.htm
but how to use in real time scenario is an issue?
Do we have write code in GET_ACKNOWLEDGMENT method while creating ABAP Proxy? I understood that the we can query an acknowledgment with the help of Message ID but how do we pass PI message id to this code?
Thanks a lot
Regards

hey all!!
Please respond.

Interface Proxy to Soap

My problem is:
I have a interface Proxy to Soap Async, but the wsdl provided for vendor is sync and the return message is not important to me.
In Ack in the sxmb_moni, I have a message error:
com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
Is there some way to ignore this return message from webservice?
Thanks,

Rosa,
I think problem is at your client's end. I had the sam error and in my case the object reference error was being sent from .net server.
We recommended client to change the structire of web service (wsdl) and issue was resolved.
Just try changing the structure of the web services and create & use a new wsdl and see what happens.
Also please refer the blog. They also had the similar issue.
Re: System Error in Message Monitoring while it shows checked flag in SXMB_MONI
Regards
Veeru
Edited by: viru srivastava on Nov 17, 2010 2:41 AM

Async proxy to soap messages to be processed like EOIO

Hi,
I have a proxy to soap interface. What I want is to route these message these message through one queue in IE level so that, these would be sent to the receiver in order. Also doing this confirm that at the AE level, they would be delivered in order?
I looked at the tuning parameter for eo_outbound_parallel with the reveiver id, but it is routing all the messages to the receiver system in one queue. but I want this only for one interface.
any ideas?
thanks.
Sri

This is what I have observed -
Asynchronous interfaces.
Maintain Order at Runtime checked in the interface determination.
It is an enhanced interface determination producing at the most 3 messages.
When the mapping produced just one message -
In RWB when I checked for the messages processed under integration engine, I found Quality of Service - EO.
At the adapter engine level also the quality of service is - EO
The converstion ID in this case is blank
When the mapping produced more than one message -
In RWB when I checked for the messages processed under integration engine, I found Quality of Service - EO.
At the adapter engine level also the quality of service is - EOIO
The converstion ID in this case is non blank. (this is different at different times. But all of the message generated at the same mapping split have the same value)
So what I understood is, only when there are multiple messages getting generated from the split mapping, only then the AE takes care that only these messages (generated at that instance) would be delivered in order.
Any other observations are welcome.
VJ

ABAP Client Proxy to SOAP

Hi all,
I am working on ABAP client proxy to SOAP Asynchronous scenario. when iam sending the data from r/3 system data sent to webservice.
but PI sending this same data 3 more to the third parth system. when i checked in runtime workbench it is showing number of retrys 3
how to resolve this issue. please explain in detail
Thanks
Anil

Anil,
That's the default setting for Async SOAP communication...this can occur if the receiver is overloaded and cannot take any more feed and sometimes time out in the middle of the hand off...this would lead to re-try in PI...so you would see 3 entries of same data...refresh or clear the data from the receiver could solve the issue...
Thanks,
Srini
Edited by: Srinivas Davuluri on Sep 9, 2010 1:51 PM

Proxy to SOAP in PI 7.1

Hi Experts
I have requirement for Proxy to SOAP (Synchronous) and it needs a BPM to get the response from SOAP and post to the Proxy
Can any send the Prototype
Thanks
PR

BPM design:
Receive(Async From Proxy) -
> SyncSend(To SOAP) ---> Send(Async from BPM to Proxy)
you need to have:
1) 1 OB Async SI for SAP ---> BPM.......1 ABS Async SI to receive the SAP message into BPM.....message in both the SIs is the Proxy structure
2) 1 ABS Sync SI for BPM <---> SOAP ...... 1 IN Sync SI at the SOAP side
3) 1 ABS Async SI for BPM----> Proxy.......1 IN Async SI at the SAP end....message will be the Proxy structure.
You may need:
1 OM for BPM <---> SOAP flow
1 OM for BPM ---> Proxy....
Have you opened one more thread with the same requirement??
Regards,
Abhishek.

Proxy to SOAP Sync with BPM (1:N)

Hi
Proxy to SOAP Sync and return message will be posted back to R/3 via proxy. This is Async to Sync using BPM. And the split happens in BPM as well. We are suppose to go with BPM here, that's the mandatory step for learning purpose
I am trying to follow the steps below
1. OB Async MI Proxy outbound message into XI
2. ABS Async MI to receive the proxy message into BPM
3. ABS Sync MI SOAP Sync message
4.ABS Async MI for Proxy Inbound to R/3
5. BPM for Split
I am at the stage of writing spec, can't execute any of the steps and have no prior experience with this kind ofscenario. If anybody have experience, please do share exact steps. Thanks in advance

Hi,
Your steps are correct ... in the IP, the following steps will be there -
Rcv -> Transform -> Send (sync) -> Transform -> Send (async).
I am not too sure what you mean by step 5 - BPM for split ?
Regards,
Neetesh

Message not received in Proxy to SOAP scenario

Hi All
I have a proxy to SOAP scenario. It is not working from past few days.
When a message is sent, there is a checkered flag in SXMB_MONI.
In component monitoring of RWB, i see that the status is 'Success' and description is 'Message status set to DLVD'.
But, it is not reaching its destination. Can you tell me where else i have to check, to find out the problem?
Thanks in Advance
Chandra Sekhar

hi, just do it
this kind of error is related with an authentification problem against WS. to check it do it:
1 take the inbound message from Moni, do a test mapping.
2 download XML Spy (altova) and create a new SOAP request.
put the WS URL and select the proper soap action.
3 paste the test mapping result XML and send the soap request.
4 put user and pass.
5 if the interface is async, XML Spy will retrn you an empty response else if the scenario is sync it will return you the proper response.
thanks
Rodrigo

Error while invoking the ABAP Proxy via SOAP Adapter

Hi,
My scenario involves SOAP Client invoking a webservice hosted in PI which in turn invokes the ABAP Proxy asyncronously.
SOAP Client -> PI -> ECC (ABAP Proxy) . This works fine.
Next , I have exposed the ECC Service Interface as webservice using SOA Manager transaction. Now, once the service is created using SOAManager, i replaced the XI Adapter with SOAP Adapter and provided the target URL as the URL provided by the SOAManager.
SOAP Client -> PI -> ECC (ABAP Proxy via SOAP Adapter)
With this approach, i am encountering the below error message
2009-05-29 12:17:55 Error Adapter Framework caught exception: null
2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
Any ideas on the above errror message? Any pointers or inputs will be appreciated.
Thanks,
Vinayak Kamath

> 2009-05-29 12:17:55 Error Adapter Framework caught exception: null
> 2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
This is a generic error message which does not have any information about the error which has occurred.
Do you see any error messages in the SOAP client?
Regards
Stefan

Error in SOAP receiver channel in Synchronous Proxy to SOAP scenario

Hi all,
We are experiencing an issue with a synchronous Proxy to SOAP scenario. Getting below error message in the SOAP receiver communication channel for the response message.
SOAP: Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: com.sap.aii.utilxi.misc.api.ResourceException: Could not determine mapping steps for message 1364b76e-ecbf-11e4-85f4-000023acfde6.
We are running PI 7.4.
Any help is appreciated.
Thanks,
Pushpa

Hi,
Seems the Receiver Webservice is not reachable. Did you try to test it using SOAP UI tool.
1. Test a fresh message from local SOAP UI tool.
2. Pick 3rd party WSDL file and Import in SOAP UI tool.
3. Put some dummy data for mandatory fields
4. Trigger it msg and ckh if you get successful / response msg.
5. Check if firewall is open and that URL is not blocked.
Hope it helps
Regards,
Azhar

PROXY to SOAP ; HTTP403 error in PI 7.1

Hi team,
it was proxy to HTTP scenario. Receiver : webportal . We have chnged it to Proxy to SOAP ,due to HTTP does not support multi message generation . I have checked Do NOT USE SOAP Envelope in SOAP rcv channel. Pls find the config details.
Adapter Type: SOAP
Trans.protocal: HTTP
Mess.Protocal: SOAP1.1
Do not use SOAP envelope : Checked
Now Im getting error in RWB .
"Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 403 Access denied"
I checked with the basis people- they confirmed - some request hitting the site. but unable to read the content . they specified HTTP header should contain the content type : text/xml . If I checked "Do not use SOAP envelope " , I guess the content type is application/xml etc.
so how can I change the HTTP content type to text/xml. OR any other reason tfor this error.
thnaks
Drumi.

Hello,
I checked with the basis people- they confirmed - some request hitting the site. but unable to read the content . they specified HTTP header should contain the content type : text/xml . If I checked "Do not use SOAP envelope " , I guess the content type is application/xml etc.
so how can I change the HTTP content type to text/xml. OR any other reason tfor this error.
The content type when Do Not Use SOAP Envelope is checked defaults to application/xml. To change it to the correct content type, use the MessageTransformBean for your requirement.
ProcessingSequence                         ModuleName           Type     ModuleKey
1          localejbs/AF_Modules/MessageTransformBean            LEB      0
2          sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean LEB      soap
Module Configuration
ModuleKey                ParameterName                ParameterValue
0                      Transform.ContentType          text/xml
For more info, see http://help.sap.com/saphelp_nwpi711/helpdata/en/57/0b2c4142aef623e10000000a155106/frameset.htm
Check also if you are passing credentials in your Receiver.
Hope this helps
Mark

ABAP-Proxy to SOAP: Error in SOAP Adapter

Hi!
I would like to implement ABAP-Proxy to SOAP scenario.
Unfortunately my SOAP receiver channnel has the following error:
SOAP: call failed: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: No SOAP Envelope but 1 definitions; HTTP 200 OK: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK
Furthermore the call of /sap/bc/soap/rfc of business system B is erroneous
http://<server system B>:8000/sap/bc/soap/rfc
Here I get the error: HTTP 500 Internal Server error
Can some one help me to solve this problem?
Thank you very much!
regards
Holger

Hi,
Are you using the webservice exposed by SAP or it is third party webservice. Can you explain your complete scenario? What is the url you have given in your receiver SOAP Channel? Was that no configured earlier?
If at all you are using the SAP webservice, the wsdl link should be.
http://<server>:<http port>/sap/bc/soap/wsdl11?services=BAPI_MATERIAL_EXISTENCECHECK&sap-client=200
The target url you will be able to see in the wsdl itself also
amit

Error "soap fault: No operation available for request" in proxy to soap Scenario

Hi Experts,
Unable to trace the below error when pushing the message from RWB while testing the PROXY to SOAP interface
Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: No operation available for request {http://schemas.xmlsoap.org/soap/envelope/}Envelope.
Thank you very much if any one provided the solution
Regards,
Yugandhar

Hi Yugandhar,
Check the below thread,
Connecting from SAP PI To Salesforce
Regards
RK N.

Error in Proxy to SOAP synchronous scenario

Hi Gurus,
Hope you are doing well. I have a Proxy to SOAP synchronous interface interacting with an external system (system outside the firewall/landscape of my company).
When I am trying to post the request message from XI, I am getting the following error.
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs
In the WSDL provided by the external application, i.e. receiver WSDL, there is no attribute/field with the name 'IncludeExceptionDetailInFaults' and there is no fault string defined.
Where is this error being thrown up? Is it a network/firewall error that XI is unable to determine?
Please provide an answer as soon as possible.
regards
Debansu

Hi,
i think it is the problem in the WSDL provider system, because it is throwing the Error with some string".NET",
do the below steps for investigating the issue
1)try pinging the URL provided in the WSDL from internet explorer.
2)if it is successfull, try to push one message from SOAP UI to by importing that WSDL, if you get any error then it is problem in the end system.
Thank You,
Madhav

Proxy to soap : async

Similar Messages

Maybe you are looking for