Proxy To SOAP Asynchronous

Hi Folks,
    I'm doing a scenario from proxy to soap. in that I'm fetching the data from the tables in the SAP system using the proxy and sending the same to the webservice through the SOAP adapter configured in the Receiver end. basically I have the XI sender adpter & the SOAP receiver adapter. My question here is whicle sending the data if the webservice is down can still the data be sent once the webservice is active ?
Regards,
  santosh

Santosh,
My question here is whicle sending the data if the webservice is down can still the data be sent once the webservice is active ?
If the web service is down, then the SOAP channel will try 3 times before going into error. Once the service is back up, you can re-send the message from RWB.
Regards,
Neetesh

Similar Messages

  • ABAP Client Proxy to SOAP

    Hi all,
    I am working on ABAP client proxy to SOAP Asynchronous scenario.  when iam sending the data from r/3 system data sent to webservice.
    but PI sending this same data  3 more to the third parth system.  when i checked in runtime workbench it is showing number of retrys 3
    how to resolve this issue.  please explain in detail
    Thanks
    Anil

    Anil,
    That's the default setting for Async SOAP communication...this can occur if the receiver is overloaded and cannot take any more feed and sometimes time out in the middle of the hand off...this would lead to re-try in PI...so you would see 3 entries of same data...refresh or clear the data from the receiver could solve the issue...
    Thanks,
    Srini
    Edited by: Srinivas Davuluri on Sep 9, 2010 1:51 PM

  • Acknowlegment in Client Proxy to SOAP  Async Scenario

    Hia,
    We are working on ABAP Proxy  --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
    ECC -> PI -> Legacy CRM
    I have few threads everyone is posting the following link:
    http://help.sap.com/saphelp_nw04/helpdata/EN/f4/8620c6b58c422c960c53f3ed71b432/frameset.htm
    but how to use in real time scenario is an issue?
    Do we have write code in GET_ACKNOWLEDGMENT method while creating ABAP Proxy? I understood that the we can query an acknowledgment with the help of Message ID but how do we pass PI message id to this code?
    Thanks a lot
    Regards

    hey all!!
    Please respond.

  • Abap proxy 2 soap

    Hi,
    this scenario is abap proxy 2 soap ,, , source system send some data to target webservice and target webservice return approval number.
    I checked target url and soap action in receiver soap adapter, and those value is correct.
    on sxmb_moni
    i got NO_MAPPINGPROGRAM_FOUND
    http://test.test.com/pt/ses001/approvalprocess SES001_IM does not exist in runtime cache</SAP:Stack>
    and Applicatoin Error
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>application fault</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    here is Sent message log on MDT.
    2006-08-29 13:25:37 Error SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
    2006-08-29 13:25:37 Success SOAP: response message leaving the adapter
    2006-08-29 13:25:37 Success Application attempting to send an XI message asynchronously using connection AFW.
    2006-08-29 13:25:37 Success Trying to put the message into the send queue.
    2006-08-29 13:25:37 Success The response message for message 44f23177-e6ed-0270-0000-000046028211(INBOUND) was successfully transmitted to the calling application.
    2006-08-29 13:25:37 Success The message status set to DLVD.
    2006-08-29 13:25:37 Success The application sent the message asynchronously using connection AFW. Returning to application.
    here is Receive message log on MDT.
    2006-08-29 13:25:37 Success The message was successfully received by the messaging system. Profile: XI URL: http://xi0034:50000/MessagingSystem/receive/AFW/XI
    2006-08-29 13:25:37 Success Using connection AFW. Trying to put the message into the request queue.
    2006-08-29 13:25:37 Success Message successfully put into the queue.
    2006-08-29 13:25:37 Success The message was successfully retrieved from the request queue.
    2006-08-29 13:25:37 Success The message status set to DLNG.
    2006-08-29 13:25:37 Success Delivering to channel: R_TEST_SOAP_SSS001
    2006-08-29 13:25:37 Success SOAP: request message entering the adapter
    2006-08-29 13:25:37 Success SOAP: completed the processing
    2006-08-29 13:25:37 Success SOAP: response message received 6bc3e4d0-3716-11db-a265-00145e483080
    2006-08-29 13:25:37 Error SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
    i can see source data on sxmb_moni.
    <?xml version="1.0" encoding="utf-8" ?>
    - <nr1:APPROVALREQ_SES_MT xmlns:nr1="http://test.test.com/pt/ses001/approvalprocess">
      <TITLE>46</TITLE>
      <GUBUN />
      <REQUESTOR>46</REQUESTOR>
      <TEXTLINE>SAFSAFSAFDSAF</TEXTLINE>
      </nr1:APPROVALREQ_SES_MT>
    request message mapping of request
      <?xml version="1.0" encoding="UTF-8" ?>
    - <ns1:ApprovalRequest xmlns:ns1="http://70.2.207.241:8080/axis/ApprovalService.jws">
      <args1>46</args1>
      <args2>46</args2>
      </ns1:ApprovalRequest>
    I can not see any return value comming from target webservice on sxmb_moni.
    request message mapping error on response
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>application fault</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    payload of request message mapping of response
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
      <ns2:hostname xmlns:ns2="http://xml.apache.org/axis/">ibmr52</ns2:hostname>
    please check what was my fault.
    thanks
    venjamin

    Hi Bhavesh.
    thanks for the note.,,
    please look at the bottom of this content.
    i can not see  "Method=Approval" between jws and args1 even though i set SOAP Action = Approval on Receiver SOAP Adapter.
    is this happening something wrong? or is it normal log?
    <?xml version="1.0" encoding="UTF-8"?>
    <ns1:ApprovalRequest xmlns:ns1="http://70.2.207.241:8080/axis/ApprovalService.jws"><args1>333</args1><args2>333</args2></ns1:ApprovalRequest>
    SAP_512dbe91-372d-11db-b291-00145e483080_END
    here is detail message log on MDT.
    --SAP_512dbe91-372d-11db-b291-00145e483080_END
    Content-ID: <[email protected]>
    Content-Disposition: attachment;filename="[email protected]"
    Content-Type: text/xml; charset=utf-8
    Content-Description: SOAP
    <SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Header>
    <sap:Main xmlns:sap='http://sap.com/xi/XI/Message/30' versionMajor='3' versionMinor='0' SOAP:mustUnderstand='1' xmlns:wsu='http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' wsu:Id='wsuid-main-92ABE13F5C59AB7FE10000000A1551F7'>
    <sap:MessageClass>ApplicationMessage</sap:MessageClass>
    <sap:ProcessingMode>synchronous</sap:ProcessingMode>
    <sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId>
    <sap:TimeSent>2006-08-29T07:10:08Z</sap:TimeSent><sap:Sender><sap:Party agency='' scheme=''></sap:Party>
    <sap:Service>BS_SAPR3_SSS0017</sap:Service></sap:Sender><sap:Receiver>
    <sap:Party agency='' scheme=''></sap:Party><sap:Service>BS_MMM_D</sap:Service></sap:Receiver>
    <sap:Interface namespace='http://sds.samsung.co.kr/pt/sessingle001/approvalprocess'>APPROVALREQ_MMM_IB</sap:Interface>
    </sap:Main><sap:ReliableMessaging xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'>
    <sap:QualityOfService>BestEffort</sap:QualityOfService></sap:ReliableMessaging>
    <sap:Diagnostic xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'>
    <sap:TraceLevel>Information</sap:TraceLevel><sap:Logging>Off</sap:Logging></sap:Diagnostic><sap:HopList xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'>
    <sap:Hop timeStamp='2006-08-29T07:10:08Z' wasRead='false'><sap:Engine type='BS'>BS_SAPR3_SSS0017</sap:Engine>
    <sap:Adapter namespace='http://sap.com/xi/XI/System'>XI</sap:Adapter><sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId><sap:Info>3.0</sap:Info></sap:Hop>
    <sap:Hop timeStamp='2006-08-29T07:09:06Z' wasRead='false'>
    <sap:Engine type='IS'>is.00.xi0034</sap:Engine>
    <sap:Adapter namespace='http://sap.com/xi/XI/System'>XI</sap:Adapter>
    <sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId><sap:Info>3.0</sap:Info></sap:Hop><sap:Hop timeStamp='2006-08-29T07:09:08Z' wasRead='false'>
    <sap:Engine type='AE'>af.sxd.xi0034</sap:Engine><sap:Adapter namespace='http://sap.com/xi/XI/System'>XIRA</sap:Adapter>
    <sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId></sap:Hop></sap:HopList></SOAP:Header><SOAP:Body>
    <sap:Manifest xmlns:sap='http://sap.com/xi/XI/Message/30' xmlns:xlink='http://www.w3.org/1999/xlink' xmlns:wsu='http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' wsu:Id='wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7'/></SOAP:Body></SOAP:Envelope>
    --SAP_512dbe91-372d-11db-b291-00145e483080_END
    content-id: [email protected]
    content-type: application/xml
    <?xml version="1.0" encoding="UTF-8"?>
    <ns1:ApprovalRequest xmlns:ns1="http://70.2.207.241:8080/axis/ApprovalService.jws"><args1>333</args1><args2>333</args2></ns1:ApprovalRequest>
    SAP_512dbe91-372d-11db-b291-00145e483080_END
    thanks
    venjamin
    Message was edited by: venjamin

  • Async proxy to soap messages to be processed like EOIO

    Hi,
    I have a proxy to soap interface. What I want is to route these message these message through one queue in IE level so that, these would be sent to the receiver in order. Also doing this confirm that at the AE level, they would be delivered in order?
    I looked at the tuning parameter for eo_outbound_parallel with the reveiver id, but it is routing all the messages to the receiver system in one queue. but I want this only for one interface.
    any ideas?
    thanks.
    Sri

    This is what I have observed -
    Asynchronous interfaces.
    Maintain Order at Runtime checked in the interface determination.
    It is an enhanced interface determination producing at the most 3 messages.
    When the mapping produced just one message -
    In RWB when I checked for the messages processed under integration engine, I found Quality of Service - EO.
    At the adapter engine level also the quality of service is - EO
    The converstion ID in this case is blank
    When the mapping produced more than one message -
    In RWB when I checked for the messages processed under integration engine, I found Quality of Service - EO.
    At the adapter engine level also the quality of service is - EOIO
    The converstion ID in this case is non blank. (this is different at different times. But all of the message generated at the same mapping split have the same value)
    So what I understood is, only when there are multiple messages getting generated from the split mapping, only then the AE takes care that only these messages (generated at that instance) would be delivered in order.
    Any other observations are welcome.
    VJ

  • Error while invoking the ABAP Proxy via SOAP Adapter

    Hi,
    My scenario involves SOAP Client invoking a webservice hosted in PI which in turn invokes the ABAP Proxy asyncronously.
    SOAP Client -> PI -> ECC (ABAP Proxy) . This works fine.
    Next , I have exposed the ECC Service Interface as webservice using SOA Manager transaction. Now, once the service is created using SOAManager, i replaced the XI Adapter with SOAP Adapter and provided the target URL as the URL provided by the SOAManager.
    SOAP Client -> PI -> ECC (ABAP Proxy via SOAP Adapter)
    With this approach, i am encountering the below error message
    2009-05-29 12:17:55 Error Adapter Framework caught exception: null
    2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
    Any ideas on the above errror message? Any pointers or inputs will be appreciated.
    Thanks,
    Vinayak Kamath

    > 2009-05-29 12:17:55 Error Adapter Framework caught exception: null
    > 2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
    This is a generic error message which does not have any information about the error which has occurred.
    Do you see any error messages in the SOAP client?
    Regards
    Stefan

  • Error in SOAP receiver channel in Synchronous Proxy to SOAP scenario

    Hi all,
    We are experiencing an issue with a synchronous Proxy to SOAP scenario. Getting below error message in the SOAP receiver communication channel for the response message.
    SOAP: Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
    Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: com.sap.aii.utilxi.misc.api.ResourceException: Could not determine mapping steps for message 1364b76e-ecbf-11e4-85f4-000023acfde6.
    We are running PI 7.4.
    Any help is appreciated.
    Thanks,
    Pushpa

    Hi,
    Seems the Receiver Webservice is not reachable. Did you try to test it using SOAP UI tool.
    1. Test a fresh message from local SOAP UI tool.
    2. Pick 3rd party WSDL file and Import in SOAP UI tool.
    3. Put some dummy data for mandatory fields
    4. Trigger it msg and ckh if you get successful / response msg.
    5. Check if firewall is open and that URL is not blocked.
    Hope it helps
    Regards,
    Azhar

  • PROXY to SOAP ; HTTP403 error in PI 7.1

    Hi team,
    it was proxy to HTTP scenario. Receiver : webportal . We have chnged it to Proxy to SOAP ,due to HTTP does not support multi message generation . I have checked Do NOT USE SOAP Envelope in SOAP rcv channel. Pls find the config details.
    Adapter Type: SOAP
    Trans.protocal: HTTP
    Mess.Protocal: SOAP1.1
    Do not use SOAP envelope : Checked
    Now Im getting error in RWB .
    "Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 403 Access denied"
    I checked with the basis people- they confirmed - some request hitting the site. but unable to read the content . they specified HTTP header should contain the content type : text/xml . If I checked "Do not use SOAP envelope " , I guess the content type is application/xml etc.
    so how can I change the HTTP content type to text/xml. OR any other reason tfor this error.
    thnaks
    Drumi.

    Hello,
    I checked with the basis people- they confirmed - some request hitting the site. but unable to read the content . they specified HTTP header should contain the content type : text/xml . If I checked "Do not use SOAP envelope " , I guess the content type is application/xml etc.
    so how can I change the HTTP content type to text/xml. OR any other reason tfor this error.
    The content type when Do Not Use SOAP Envelope is checked defaults to application/xml. To change it to the correct content type, use the MessageTransformBean for your requirement.
    ProcessingSequence                         ModuleName           Type     ModuleKey
    1          localejbs/AF_Modules/MessageTransformBean            LEB      0
    2          sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean LEB      soap
    Module Configuration
    ModuleKey                ParameterName                ParameterValue
    0                      Transform.ContentType          text/xml
    For more info, see http://help.sap.com/saphelp_nwpi711/helpdata/en/57/0b2c4142aef623e10000000a155106/frameset.htm
    Check also if you are passing credentials in your Receiver.
    Hope this helps
    Mark

  • ABAP-Proxy to SOAP: Error in SOAP Adapter

    Hi!
    I would like to implement ABAP-Proxy to SOAP scenario.
    Unfortunately my SOAP receiver channnel has the following error:
    SOAP: call failed: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: No SOAP Envelope but 1 definitions; HTTP 200 OK: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK
    Furthermore the call of  /sap/bc/soap/rfc of business system B is erroneous
    http://<server system B>:8000/sap/bc/soap/rfc
    Here I get the error: HTTP 500 Internal Server error
    Can some one help me to solve this problem?
    Thank you very much!
    regards
    Holger

    Hi,
    Are you using the webservice exposed by SAP or it is third party webservice. Can you explain your complete scenario? What is the url you have given in your receiver SOAP Channel? Was that no configured earlier?
    If at all you are using the SAP webservice, the wsdl link should be.
    http://<server>:<http port>/sap/bc/soap/wsdl11?services=BAPI_MATERIAL_EXISTENCECHECK&sap-client=200
    The target url you will be able to see in the wsdl itself also
    amit

  • Error "soap fault: No operation available for request" in proxy to soap Scenario

    Hi Experts,
    Unable to trace the below error when pushing the message from RWB while testing the PROXY to SOAP interface
      Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: No operation available for request {http://schemas.xmlsoap.org/soap/envelope/}Envelope.
    Thank you very much if any one provided the solution
    Regards,
    Yugandhar 

    Hi Yugandhar,
    Check the below thread,
    Connecting from SAP PI To Salesforce
    Regards
    RK N.

  • Error in Proxy to SOAP synchronous scenario

    Hi Gurus,
    Hope you are doing well. I have a Proxy to SOAP synchronous interface interacting with an external system (system outside the firewall/landscape of my company).
    When I am trying to post the request message from XI, I am getting the following error.
    MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: The server was unable to process the request due to an internal error.  For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs
    In the WSDL provided by the external application, i.e. receiver WSDL, there is no attribute/field with the name 'IncludeExceptionDetailInFaults' and there is no fault string defined.
    Where is this error being thrown up? Is it a network/firewall error that XI is unable to determine?
    Please provide an answer as soon as possible.
    regards
    Debansu

    Hi,
    i think it is the problem in the WSDL provider system, because it is throwing the Error with some string".NET",
    do the below steps for investigating the issue
    1)try pinging the URL provided in the WSDL from internet explorer.
    2)if it is successfull, try to push one message from SOAP UI to by importing that WSDL, if you get any error then it is problem in the end system.
    Thank You,
    Madhav

  • Error in synchronous( abap proxy to soap)scenario

    Hi experts,
    My scenario is synchronous abap proxy to sysnchronous soap. for proxy I am using business system name as ERDCLNT220 and soap business system name as BS_HRS_DEV
    configuration steps are
    1. only client proxy to soap scenario I have done.
    communication channels: only receiver soap adapter. no proxy sender communication channel for client proxy.
    Already we have RFC destination connection and connection type H for proxy to xi.
    1.Is it required RFC destination connection for xi to server proxy.
    2.Is it required receiver proxy communication channel for server proxy?.
    i HAVE TESTED THIS INTERFACE. I am able to send the request. But I am not able to receive the response from soap webservice message .
    error is:
    SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
    exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
    Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
    Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson. Setting message to status failed.
    Kindly help me.
    advance thanks
    thanks and regards
    elton
    Edited by: eltonsaranya on May 9, 2011 10:27 AM

    Your exception message shows problem at the webservice side.
    Check the following:
    a) you need two mappings one for proxy req to soap request and other soap response to proxy response
    b) You need to create service interfaces both sender and receiver synchronous .
    c) communication channel  QOS is best effort for both sender and receiver
    d) I dont see problem in soap configuration. Bcuz you are able to ping and while getting response from the method getPerson it fails.
    f) See your SOAP response structure matches with WSDL provided.
    g) You can also test outside PI.. I meant testing via soap client tool like SOAPUI  for that web service. So that you know whether problem exists on the target system or not.
    Hope that helps.

  • ABAP Proxy to SOAP using PI

    Dear Friends,
    I have the requirement ABAP Proxy to SOAP using PI.
    In R/3 I had generated the proxy , after that what I need to do.
    Please suggest me.
    Regards,
    Shalini Shah

    Hi Shalini,
    There are loads of blogs and discussion threads available to help you with this scenario. Just check the following links:
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79?quicklink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/advancedsearch?query=proxytosoap+scenario
    Please go ahead and check the documents and let us know if you have any doubt.
    Rgds,
    Puneet

  • Problem Proxy to SOAP Synchronous

    Hi Experts, I was looking for a solution to this problem, but I could not find the solution, I hope you can help me.
    I have the scenario PROXY ==> PI ==> SOAP (Synchronus).
    When the Web Service is ok, I have no problems, my problem is with the Fault Exception, because I tested it in SoapUI, and I'm getting this message.
    <S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
       <S:Body>
          <S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope">
             <faultcode>S:Server</faultcode>
             <faultstring>Error al insertar Domicilio en servicio Empleado</faultstring>
             <detail>
                <FaultException:FaultException xsi:nil="true" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.interacciones.com.mx/ServicioEmpleado/" xmlns:FaultException="http://www.interacciones.com.mx/ServicioEmpleado/"/>
                <ns2:exception class="mx.com.interacciones.servicioEmpleado.FaultException_Exception" note="To disable this feature, set com.sun.xml.ws.fault.SOAPFaultBuilder.disableCaptureStackTrace system property to false" xmlns:ns2="http://jax-ws.dev.java.net/">
                   <message>Error al insertar Domicilio en servicio Empleado</message>
                   <ns2:stackTrace>
                      <ns2:frame class="mx.com.interacciones.servicioEmpleado.ServicioEmpleadoImpl" file="ServicioEmpleadoImpl.java" line="87" method="agregarEmpleado"/>
                      <ns2:frame class="sun.reflect.GeneratedMethodAccessor267" line="unknown" method="invoke"/>
                      <ns2:frame class="sun.reflect.DelegatingMethodAccessorImpl" file="DelegatingMethodAccessorImpl.java" line="25" method="invoke"/>
                      <ns2:frame class="java.lang.reflect.Method" file="Method.java" line="597" method="invoke"/>
                      <ns2:frame class="weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker" file="WLSInstanceResolver.java" line="101" method="invoke"/>
                      <ns2:frame class="weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker" file="WLSInstanceResolver.java" line="83" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.InvokerTube$2" file="InvokerTube.java" line="152" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.sei.EndpointMethodHandler" file="EndpointMethodHandler.java" line="264" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.sei.SEIInvokerTube" file="SEIInvokerTube.java" line="93" method="processRequest"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="604" method="__doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="563" method="_doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="548" method="doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="445" method="runSync"/>
                      <ns2:frame class="com.sun.xml.ws.server.WSEndpointImpl$2" file="WSEndpointImpl.java" line="275" method="process"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit" file="HttpAdapter.java" line="454" method="handle"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.HttpAdapter" file="HttpAdapter.java" line="250" method="handle"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.servlet.ServletAdapter" file="ServletAdapter.java" line="140" method="handle"/>
                      <ns2:frame class="weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke" file="HttpServletAdapter.java" line="319" method="run"/>
                      <ns2:frame class="weblogic.wsee.jaxws.HttpServletAdapter" file="HttpServletAdapter.java" line="232" method="post"/>
                      <ns2:frame class="weblogic.wsee.jaxws.JAXWSServlet" file="JAXWSServlet.java" line="310" method="doPost"/>
                      <ns2:frame class="javax.servlet.http.HttpServlet" file="HttpServlet.java" line="727" method="service"/>
                      <ns2:frame class="weblogic.wsee.jaxws.JAXWSServlet" file="JAXWSServlet.java" line="87" method="service"/>
                      <ns2:frame class="javax.servlet.http.HttpServlet" file="HttpServlet.java" line="820" method="service"/>
                      <ns2:frame class="weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction" file="StubSecurityHelper.java" line="227" method="run"/>
                      <ns2:frame class="weblogic.servlet.internal.StubSecurityHelper" file="StubSecurityHelper.java" line="125" method="invokeServlet"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletStubImpl" file="ServletStubImpl.java" line="292" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletStubImpl" file="ServletStubImpl.java" line="175" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction" file="WebAppServletContext.java" line="3594" method="run"/>
                      <ns2:frame class="weblogic.security.acl.internal.AuthenticatedSubject" file="AuthenticatedSubject.java" line="321" method="doAs"/>
                      <ns2:frame class="weblogic.security.service.SecurityManager" file="SecurityManager.java" line="121" method="runAs"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext" file="WebAppServletContext.java" line="2202" method="securedExecute"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext" file="WebAppServletContext.java" line="2108" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletRequestImpl" file="ServletRequestImpl.java" line="1432" method="run"/>
                      <ns2:frame class="weblogic.work.ExecuteThread" file="ExecuteThread.java" line="201" method="execute"/>
                      <ns2:frame class="weblogic.work.ExecuteThread" file="ExecuteThread.java" line="173" method="run"/>
                   </ns2:stackTrace>
                </ns2:exception>
             </detail>
          </S:Fault>
       </S:Body>
    </S:Envelope>
    So, I was reading a lot of threads, those said to copy the structure, but it doest not work.
    I tried to check the "Do Not Use SOAP Envolve", but when I did that I got this error.
    Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type
    When I unchecked I got this error.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM_RecursosHumanos_ServicioEmplead~</SAP:P1>
      <SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
      <SAP:P3>on: Cannot create target element /ns0:Fault. Value</SAP:P3>
      <SAP:P4>s missing in queue context. Target XSD requires a~</SAP:P4>
      <SAP:AdditionalText />
      <SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_RecursosHumanos_ServicioEmplead~; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:Fault. Values missing in queue context. Target XSD requires a~</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    I could never see the Fault Structure in PI and neither in Web Service Navigator.
    Please, I need some help.
    Thank you very much.
    Regards

    If I test it in Soap UI I get the Fault, and in WsNavigator I can see the FaultCode and FaultString as a message on the top of the page.
    I do not know what more to do.
    <S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
       <S:Body>
          <S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope">
             <faultcode>S:Server</faultcode>
             <faultstring>Error al insertar Domicilio en servicio Empleado</faultstring>
             <detail>
                <FaultException:FaultException xsi:nil="true" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.interacciones.com.mx/ServicioEmpleado/" xmlns:FaultException="http://www.interacciones.com.mx/ServicioEmpleado/"/>
                <ns2:exception class="mx.com.interacciones.servicioEmpleado.FaultException_Exception" note="To disable this feature, set com.sun.xml.ws.fault.SOAPFaultBuilder.disableCaptureStackTrace system property to false" xmlns:ns2="http://jax-ws.dev.java.net/">
                   <message>Error al insertar Domicilio en servicio Empleado</message>
                   <ns2:stackTrace>
                      <ns2:frame class="mx.com.interacciones.servicioEmpleado.ServicioEmpleadoImpl" file="ServicioEmpleadoImpl.java" line="87" method="agregarEmpleado"/>
                      <ns2:frame class="sun.reflect.NativeMethodAccessorImpl" file="NativeMethodAccessorImpl.java" line="native" method="invoke0"/>
                      <ns2:frame class="sun.reflect.NativeMethodAccessorImpl" file="NativeMethodAccessorImpl.java" line="39" method="invoke"/>
                      <ns2:frame class="sun.reflect.DelegatingMethodAccessorImpl" file="DelegatingMethodAccessorImpl.java" line="25" method="invoke"/>
                      <ns2:frame class="java.lang.reflect.Method" file="Method.java" line="597" method="invoke"/>
                      <ns2:frame class="weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker" file="WLSInstanceResolver.java" line="101" method="invoke"/>
                      <ns2:frame class="weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker" file="WLSInstanceResolver.java" line="83" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.InvokerTube$2" file="InvokerTube.java" line="152" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.sei.EndpointMethodHandler" file="EndpointMethodHandler.java" line="264" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.sei.SEIInvokerTube" file="SEIInvokerTube.java" line="93" method="processRequest"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="604" method="__doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="563" method="_doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="548" method="doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="445" method="runSync"/>
                      <ns2:frame class="com.sun.xml.ws.server.WSEndpointImpl$2" file="WSEndpointImpl.java" line="275" method="process"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit" file="HttpAdapter.java" line="454" method="handle"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.HttpAdapter" file="HttpAdapter.java" line="250" method="handle"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.servlet.ServletAdapter" file="ServletAdapter.java" line="140" method="handle"/>
                      <ns2:frame class="weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke" file="HttpServletAdapter.java" line="319" method="run"/>
                      <ns2:frame class="weblogic.wsee.jaxws.HttpServletAdapter" file="HttpServletAdapter.java" line="232" method="post"/>
                      <ns2:frame class="weblogic.wsee.jaxws.JAXWSServlet" file="JAXWSServlet.java" line="310" method="doPost"/>
                      <ns2:frame class="javax.servlet.http.HttpServlet" file="HttpServlet.java" line="727" method="service"/>
                      <ns2:frame class="weblogic.wsee.jaxws.JAXWSServlet" file="JAXWSServlet.java" line="87" method="service"/>
                      <ns2:frame class="javax.servlet.http.HttpServlet" file="HttpServlet.java" line="820" method="service"/>
                      <ns2:frame class="weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction" file="StubSecurityHelper.java" line="227" method="run"/>
                      <ns2:frame class="weblogic.servlet.internal.StubSecurityHelper" file="StubSecurityHelper.java" line="125" method="invokeServlet"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletStubImpl" file="ServletStubImpl.java" line="292" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletStubImpl" file="ServletStubImpl.java" line="175" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction" file="WebAppServletContext.java" line="3594" method="run"/>
                      <ns2:frame class="weblogic.security.acl.internal.AuthenticatedSubject" file="AuthenticatedSubject.java" line="321" method="doAs"/>
                      <ns2:frame class="weblogic.security.service.SecurityManager" file="SecurityManager.java" line="121" method="runAs"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext" file="WebAppServletContext.java" line="2202" method="securedExecute"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext" file="WebAppServletContext.java" line="2108" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletRequestImpl" file="ServletRequestImpl.java" line="1432" method="run"/>
                      <ns2:frame class="weblogic.work.ExecuteThread" file="ExecuteThread.java" line="201" method="execute"/>
                      <ns2:frame class="weblogic.work.ExecuteThread" file="ExecuteThread.java" line="173" method="run"/>
                   </ns2:stackTrace>
                </ns2:exception>
             </detail>
          </S:Fault>
       </S:Body>
    </S:Envelope>

  • Proxy to SOAP in PI 7.1

    Hi Experts
    I have requirement for Proxy to SOAP (Synchronous) and it needs a BPM to get the response from SOAP and post to the Proxy
    Can any send the Prototype
    Thanks
    PR

    BPM design:
    Receive(Async From Proxy) -
    > SyncSend(To SOAP) ---> Send(Async from BPM to Proxy)
    you need to have:
    1) 1 OB Async SI for SAP ---> BPM.......1 ABS Async SI to receive the SAP message into BPM.....message in both the SIs is the Proxy structure
    2) 1 ABS Sync SI for BPM <---> SOAP ...... 1 IN Sync SI at the SOAP side
    3) 1 ABS Async SI for BPM----> Proxy.......1 IN Async SI at the SAP end....message will be the Proxy structure.
    You may need:
    1 OM for BPM <---> SOAP flow
    1 OM for BPM ---> Proxy....
    Have you opened one more thread with the same requirement??
    Regards,
    Abhishek.

Maybe you are looking for

  • Installation Problem on RedHat Linux 7.3

    Hello, I am tring to install JWSDP-1_2 package on my RedHat 7.3 Linux box But I recevied the following error message [root@design JWSDP-1_2]# ./jwsdp-1_2-unix.sh -console bash: ./jwsdp-1_2-unix.sh: /bin/sh: bad interpreter: ?? ??? How do I install it

  • AUC down payment hitting wrong GLS

    Dear Experts, We are using down payment for WIP, complete configuration in OBYR OAYB and assignment of down payment GL and down payment clearing GL are assigned in AO90. We prepare internal orders book all the expenses and will be settled to AUC in t

  • OSX 10.7.5 Volume reduced randomly

    Hi, The volume on my macbook pro gets randomly reduced automatically.. has anyone experienced the same issue? This is the first time it has done this, and it won't' seem to go away even after a restart. Anyone having the same problem, and if so what

  • Focus Lost on Tree Cell Edit

    I am trying to force changes made in a tree cell edit when focus to that tree node has been lost(like on an enter button press) but it always reverts to the old value. i have tried adding a CellEditorListener to force an enter key press on the editin

  • OBIEE: Cannot Do Subtraction between Two Columns

    I would like to see the difference of a customer's spending in the current Vs. previous period. So each row contains the data of one customer. And my first field (column A) lists out the customer's spending in the current period and second field (col