Proxy to SOAP in PI 7.1

Hi Experts
I have requirement for Proxy to SOAP (Synchronous) and it needs a BPM to get the response from SOAP and post to the Proxy
Can any send the Prototype
Thanks
PR

BPM design:
Receive(Async From Proxy) -
> SyncSend(To SOAP) ---> Send(Async from BPM to Proxy)
you need to have:
1) 1 OB Async SI for SAP ---> BPM.......1 ABS Async SI to receive the SAP message into BPM.....message in both the SIs is the Proxy structure
2) 1 ABS Sync SI for BPM <---> SOAP ...... 1 IN Sync SI at the SOAP side
3) 1 ABS Async SI for BPM----> Proxy.......1 IN Async SI at the SAP end....message will be the Proxy structure.
You may need:
1 OM for BPM <---> SOAP flow
1 OM for BPM ---> Proxy....
Have you opened one more thread with the same requirement??
Regards,
Abhishek.

Similar Messages

  • Error while invoking the ABAP Proxy via SOAP Adapter

    Hi,
    My scenario involves SOAP Client invoking a webservice hosted in PI which in turn invokes the ABAP Proxy asyncronously.
    SOAP Client -> PI -> ECC (ABAP Proxy) . This works fine.
    Next , I have exposed the ECC Service Interface as webservice using SOA Manager transaction. Now, once the service is created using SOAManager, i replaced the XI Adapter with SOAP Adapter and provided the target URL as the URL provided by the SOAManager.
    SOAP Client -> PI -> ECC (ABAP Proxy via SOAP Adapter)
    With this approach, i am encountering the below error message
    2009-05-29 12:17:55 Error Adapter Framework caught exception: null
    2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
    Any ideas on the above errror message? Any pointers or inputs will be appreciated.
    Thanks,
    Vinayak Kamath

    > 2009-05-29 12:17:55 Error Adapter Framework caught exception: null
    > 2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
    This is a generic error message which does not have any information about the error which has occurred.
    Do you see any error messages in the SOAP client?
    Regards
    Stefan

  • Error in SOAP receiver channel in Synchronous Proxy to SOAP scenario

    Hi all,
    We are experiencing an issue with a synchronous Proxy to SOAP scenario. Getting below error message in the SOAP receiver communication channel for the response message.
    SOAP: Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
    Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: com.sap.aii.utilxi.misc.api.ResourceException: Could not determine mapping steps for message 1364b76e-ecbf-11e4-85f4-000023acfde6.
    We are running PI 7.4.
    Any help is appreciated.
    Thanks,
    Pushpa

    Hi,
    Seems the Receiver Webservice is not reachable. Did you try to test it using SOAP UI tool.
    1. Test a fresh message from local SOAP UI tool.
    2. Pick 3rd party WSDL file and Import in SOAP UI tool.
    3. Put some dummy data for mandatory fields
    4. Trigger it msg and ckh if you get successful / response msg.
    5. Check if firewall is open and that URL is not blocked.
    Hope it helps
    Regards,
    Azhar

  • PROXY to SOAP ; HTTP403 error in PI 7.1

    Hi team,
    it was proxy to HTTP scenario. Receiver : webportal . We have chnged it to Proxy to SOAP ,due to HTTP does not support multi message generation . I have checked Do NOT USE SOAP Envelope in SOAP rcv channel. Pls find the config details.
    Adapter Type: SOAP
    Trans.protocal: HTTP
    Mess.Protocal: SOAP1.1
    Do not use SOAP envelope : Checked
    Now Im getting error in RWB .
    "Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 403 Access denied"
    I checked with the basis people- they confirmed - some request hitting the site. but unable to read the content . they specified HTTP header should contain the content type : text/xml . If I checked "Do not use SOAP envelope " , I guess the content type is application/xml etc.
    so how can I change the HTTP content type to text/xml. OR any other reason tfor this error.
    thnaks
    Drumi.

    Hello,
    I checked with the basis people- they confirmed - some request hitting the site. but unable to read the content . they specified HTTP header should contain the content type : text/xml . If I checked "Do not use SOAP envelope " , I guess the content type is application/xml etc.
    so how can I change the HTTP content type to text/xml. OR any other reason tfor this error.
    The content type when Do Not Use SOAP Envelope is checked defaults to application/xml. To change it to the correct content type, use the MessageTransformBean for your requirement.
    ProcessingSequence                         ModuleName           Type     ModuleKey
    1          localejbs/AF_Modules/MessageTransformBean            LEB      0
    2          sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean LEB      soap
    Module Configuration
    ModuleKey                ParameterName                ParameterValue
    0                      Transform.ContentType          text/xml
    For more info, see http://help.sap.com/saphelp_nwpi711/helpdata/en/57/0b2c4142aef623e10000000a155106/frameset.htm
    Check also if you are passing credentials in your Receiver.
    Hope this helps
    Mark

  • ABAP-Proxy to SOAP: Error in SOAP Adapter

    Hi!
    I would like to implement ABAP-Proxy to SOAP scenario.
    Unfortunately my SOAP receiver channnel has the following error:
    SOAP: call failed: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: No SOAP Envelope but 1 definitions; HTTP 200 OK: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK
    Furthermore the call of  /sap/bc/soap/rfc of business system B is erroneous
    http://<server system B>:8000/sap/bc/soap/rfc
    Here I get the error: HTTP 500 Internal Server error
    Can some one help me to solve this problem?
    Thank you very much!
    regards
    Holger

    Hi,
    Are you using the webservice exposed by SAP or it is third party webservice. Can you explain your complete scenario? What is the url you have given in your receiver SOAP Channel? Was that no configured earlier?
    If at all you are using the SAP webservice, the wsdl link should be.
    http://<server>:<http port>/sap/bc/soap/wsdl11?services=BAPI_MATERIAL_EXISTENCECHECK&sap-client=200
    The target url you will be able to see in the wsdl itself also
    amit

  • Error "soap fault: No operation available for request" in proxy to soap Scenario

    Hi Experts,
    Unable to trace the below error when pushing the message from RWB while testing the PROXY to SOAP interface
      Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: No operation available for request {http://schemas.xmlsoap.org/soap/envelope/}Envelope.
    Thank you very much if any one provided the solution
    Regards,
    Yugandhar 

    Hi Yugandhar,
    Check the below thread,
    Connecting from SAP PI To Salesforce
    Regards
    RK N.

  • Error in Proxy to SOAP synchronous scenario

    Hi Gurus,
    Hope you are doing well. I have a Proxy to SOAP synchronous interface interacting with an external system (system outside the firewall/landscape of my company).
    When I am trying to post the request message from XI, I am getting the following error.
    MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: The server was unable to process the request due to an internal error.  For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs
    In the WSDL provided by the external application, i.e. receiver WSDL, there is no attribute/field with the name 'IncludeExceptionDetailInFaults' and there is no fault string defined.
    Where is this error being thrown up? Is it a network/firewall error that XI is unable to determine?
    Please provide an answer as soon as possible.
    regards
    Debansu

    Hi,
    i think it is the problem in the WSDL provider system, because it is throwing the Error with some string".NET",
    do the below steps for investigating the issue
    1)try pinging the URL provided in the WSDL from internet explorer.
    2)if it is successfull, try to push one message from SOAP UI to by importing that WSDL, if you get any error then it is problem in the end system.
    Thank You,
    Madhav

  • Abap proxy 2 soap

    Hi,
    this scenario is abap proxy 2 soap ,, , source system send some data to target webservice and target webservice return approval number.
    I checked target url and soap action in receiver soap adapter, and those value is correct.
    on sxmb_moni
    i got NO_MAPPINGPROGRAM_FOUND
    http://test.test.com/pt/ses001/approvalprocess SES001_IM does not exist in runtime cache</SAP:Stack>
    and Applicatoin Error
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>application fault</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    here is Sent message log on MDT.
    2006-08-29 13:25:37 Error SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
    2006-08-29 13:25:37 Success SOAP: response message leaving the adapter
    2006-08-29 13:25:37 Success Application attempting to send an XI message asynchronously using connection AFW.
    2006-08-29 13:25:37 Success Trying to put the message into the send queue.
    2006-08-29 13:25:37 Success The response message for message 44f23177-e6ed-0270-0000-000046028211(INBOUND) was successfully transmitted to the calling application.
    2006-08-29 13:25:37 Success The message status set to DLVD.
    2006-08-29 13:25:37 Success The application sent the message asynchronously using connection AFW. Returning to application.
    here is Receive message log on MDT.
    2006-08-29 13:25:37 Success The message was successfully received by the messaging system. Profile: XI URL: http://xi0034:50000/MessagingSystem/receive/AFW/XI
    2006-08-29 13:25:37 Success Using connection AFW. Trying to put the message into the request queue.
    2006-08-29 13:25:37 Success Message successfully put into the queue.
    2006-08-29 13:25:37 Success The message was successfully retrieved from the request queue.
    2006-08-29 13:25:37 Success The message status set to DLNG.
    2006-08-29 13:25:37 Success Delivering to channel: R_TEST_SOAP_SSS001
    2006-08-29 13:25:37 Success SOAP: request message entering the adapter
    2006-08-29 13:25:37 Success SOAP: completed the processing
    2006-08-29 13:25:37 Success SOAP: response message received 6bc3e4d0-3716-11db-a265-00145e483080
    2006-08-29 13:25:37 Error SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
    i can see source data on sxmb_moni.
    <?xml version="1.0" encoding="utf-8" ?>
    - <nr1:APPROVALREQ_SES_MT xmlns:nr1="http://test.test.com/pt/ses001/approvalprocess">
      <TITLE>46</TITLE>
      <GUBUN />
      <REQUESTOR>46</REQUESTOR>
      <TEXTLINE>SAFSAFSAFDSAF</TEXTLINE>
      </nr1:APPROVALREQ_SES_MT>
    request message mapping of request
      <?xml version="1.0" encoding="UTF-8" ?>
    - <ns1:ApprovalRequest xmlns:ns1="http://70.2.207.241:8080/axis/ApprovalService.jws">
      <args1>46</args1>
      <args2>46</args2>
      </ns1:ApprovalRequest>
    I can not see any return value comming from target webservice on sxmb_moni.
    request message mapping error on response
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>application fault</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    payload of request message mapping of response
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
      <ns2:hostname xmlns:ns2="http://xml.apache.org/axis/">ibmr52</ns2:hostname>
    please check what was my fault.
    thanks
    venjamin

    Hi Bhavesh.
    thanks for the note.,,
    please look at the bottom of this content.
    i can not see  "Method=Approval" between jws and args1 even though i set SOAP Action = Approval on Receiver SOAP Adapter.
    is this happening something wrong? or is it normal log?
    <?xml version="1.0" encoding="UTF-8"?>
    <ns1:ApprovalRequest xmlns:ns1="http://70.2.207.241:8080/axis/ApprovalService.jws"><args1>333</args1><args2>333</args2></ns1:ApprovalRequest>
    SAP_512dbe91-372d-11db-b291-00145e483080_END
    here is detail message log on MDT.
    --SAP_512dbe91-372d-11db-b291-00145e483080_END
    Content-ID: <[email protected]>
    Content-Disposition: attachment;filename="[email protected]"
    Content-Type: text/xml; charset=utf-8
    Content-Description: SOAP
    <SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Header>
    <sap:Main xmlns:sap='http://sap.com/xi/XI/Message/30' versionMajor='3' versionMinor='0' SOAP:mustUnderstand='1' xmlns:wsu='http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' wsu:Id='wsuid-main-92ABE13F5C59AB7FE10000000A1551F7'>
    <sap:MessageClass>ApplicationMessage</sap:MessageClass>
    <sap:ProcessingMode>synchronous</sap:ProcessingMode>
    <sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId>
    <sap:TimeSent>2006-08-29T07:10:08Z</sap:TimeSent><sap:Sender><sap:Party agency='' scheme=''></sap:Party>
    <sap:Service>BS_SAPR3_SSS0017</sap:Service></sap:Sender><sap:Receiver>
    <sap:Party agency='' scheme=''></sap:Party><sap:Service>BS_MMM_D</sap:Service></sap:Receiver>
    <sap:Interface namespace='http://sds.samsung.co.kr/pt/sessingle001/approvalprocess'>APPROVALREQ_MMM_IB</sap:Interface>
    </sap:Main><sap:ReliableMessaging xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'>
    <sap:QualityOfService>BestEffort</sap:QualityOfService></sap:ReliableMessaging>
    <sap:Diagnostic xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'>
    <sap:TraceLevel>Information</sap:TraceLevel><sap:Logging>Off</sap:Logging></sap:Diagnostic><sap:HopList xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'>
    <sap:Hop timeStamp='2006-08-29T07:10:08Z' wasRead='false'><sap:Engine type='BS'>BS_SAPR3_SSS0017</sap:Engine>
    <sap:Adapter namespace='http://sap.com/xi/XI/System'>XI</sap:Adapter><sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId><sap:Info>3.0</sap:Info></sap:Hop>
    <sap:Hop timeStamp='2006-08-29T07:09:06Z' wasRead='false'>
    <sap:Engine type='IS'>is.00.xi0034</sap:Engine>
    <sap:Adapter namespace='http://sap.com/xi/XI/System'>XI</sap:Adapter>
    <sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId><sap:Info>3.0</sap:Info></sap:Hop><sap:Hop timeStamp='2006-08-29T07:09:08Z' wasRead='false'>
    <sap:Engine type='AE'>af.sxd.xi0034</sap:Engine><sap:Adapter namespace='http://sap.com/xi/XI/System'>XIRA</sap:Adapter>
    <sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId></sap:Hop></sap:HopList></SOAP:Header><SOAP:Body>
    <sap:Manifest xmlns:sap='http://sap.com/xi/XI/Message/30' xmlns:xlink='http://www.w3.org/1999/xlink' xmlns:wsu='http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' wsu:Id='wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7'/></SOAP:Body></SOAP:Envelope>
    --SAP_512dbe91-372d-11db-b291-00145e483080_END
    content-id: [email protected]
    content-type: application/xml
    <?xml version="1.0" encoding="UTF-8"?>
    <ns1:ApprovalRequest xmlns:ns1="http://70.2.207.241:8080/axis/ApprovalService.jws"><args1>333</args1><args2>333</args2></ns1:ApprovalRequest>
    SAP_512dbe91-372d-11db-b291-00145e483080_END
    thanks
    venjamin
    Message was edited by: venjamin

  • Error in synchronous( abap proxy to soap)scenario

    Hi experts,
    My scenario is synchronous abap proxy to sysnchronous soap. for proxy I am using business system name as ERDCLNT220 and soap business system name as BS_HRS_DEV
    configuration steps are
    1. only client proxy to soap scenario I have done.
    communication channels: only receiver soap adapter. no proxy sender communication channel for client proxy.
    Already we have RFC destination connection and connection type H for proxy to xi.
    1.Is it required RFC destination connection for xi to server proxy.
    2.Is it required receiver proxy communication channel for server proxy?.
    i HAVE TESTED THIS INTERFACE. I am able to send the request. But I am not able to receive the response from soap webservice message .
    error is:
    SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
    exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
    Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
    Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson. Setting message to status failed.
    Kindly help me.
    advance thanks
    thanks and regards
    elton
    Edited by: eltonsaranya on May 9, 2011 10:27 AM

    Your exception message shows problem at the webservice side.
    Check the following:
    a) you need two mappings one for proxy req to soap request and other soap response to proxy response
    b) You need to create service interfaces both sender and receiver synchronous .
    c) communication channel  QOS is best effort for both sender and receiver
    d) I dont see problem in soap configuration. Bcuz you are able to ping and while getting response from the method getPerson it fails.
    f) See your SOAP response structure matches with WSDL provided.
    g) You can also test outside PI.. I meant testing via soap client tool like SOAPUI  for that web service. So that you know whether problem exists on the target system or not.
    Hope that helps.

  • ABAP Client Proxy to SOAP

    Hi all,
    I am working on ABAP client proxy to SOAP Asynchronous scenario.  when iam sending the data from r/3 system data sent to webservice.
    but PI sending this same data  3 more to the third parth system.  when i checked in runtime workbench it is showing number of retrys 3
    how to resolve this issue.  please explain in detail
    Thanks
    Anil

    Anil,
    That's the default setting for Async SOAP communication...this can occur if the receiver is overloaded and cannot take any more feed and sometimes time out in the middle of the hand off...this would lead to re-try in PI...so you would see 3 entries of same data...refresh or clear the data from the receiver could solve the issue...
    Thanks,
    Srini
    Edited by: Srinivas Davuluri on Sep 9, 2010 1:51 PM

  • ABAP Proxy to SOAP using PI

    Dear Friends,
    I have the requirement ABAP Proxy to SOAP using PI.
    In R/3 I had generated the proxy , after that what I need to do.
    Please suggest me.
    Regards,
    Shalini Shah

    Hi Shalini,
    There are loads of blogs and discussion threads available to help you with this scenario. Just check the following links:
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79?quicklink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/advancedsearch?query=proxytosoap+scenario
    Please go ahead and check the documents and let us know if you have any doubt.
    Rgds,
    Puneet

  • Problem Proxy to SOAP Synchronous

    Hi Experts, I was looking for a solution to this problem, but I could not find the solution, I hope you can help me.
    I have the scenario PROXY ==> PI ==> SOAP (Synchronus).
    When the Web Service is ok, I have no problems, my problem is with the Fault Exception, because I tested it in SoapUI, and I'm getting this message.
    <S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
       <S:Body>
          <S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope">
             <faultcode>S:Server</faultcode>
             <faultstring>Error al insertar Domicilio en servicio Empleado</faultstring>
             <detail>
                <FaultException:FaultException xsi:nil="true" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.interacciones.com.mx/ServicioEmpleado/" xmlns:FaultException="http://www.interacciones.com.mx/ServicioEmpleado/"/>
                <ns2:exception class="mx.com.interacciones.servicioEmpleado.FaultException_Exception" note="To disable this feature, set com.sun.xml.ws.fault.SOAPFaultBuilder.disableCaptureStackTrace system property to false" xmlns:ns2="http://jax-ws.dev.java.net/">
                   <message>Error al insertar Domicilio en servicio Empleado</message>
                   <ns2:stackTrace>
                      <ns2:frame class="mx.com.interacciones.servicioEmpleado.ServicioEmpleadoImpl" file="ServicioEmpleadoImpl.java" line="87" method="agregarEmpleado"/>
                      <ns2:frame class="sun.reflect.GeneratedMethodAccessor267" line="unknown" method="invoke"/>
                      <ns2:frame class="sun.reflect.DelegatingMethodAccessorImpl" file="DelegatingMethodAccessorImpl.java" line="25" method="invoke"/>
                      <ns2:frame class="java.lang.reflect.Method" file="Method.java" line="597" method="invoke"/>
                      <ns2:frame class="weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker" file="WLSInstanceResolver.java" line="101" method="invoke"/>
                      <ns2:frame class="weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker" file="WLSInstanceResolver.java" line="83" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.InvokerTube$2" file="InvokerTube.java" line="152" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.sei.EndpointMethodHandler" file="EndpointMethodHandler.java" line="264" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.sei.SEIInvokerTube" file="SEIInvokerTube.java" line="93" method="processRequest"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="604" method="__doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="563" method="_doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="548" method="doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="445" method="runSync"/>
                      <ns2:frame class="com.sun.xml.ws.server.WSEndpointImpl$2" file="WSEndpointImpl.java" line="275" method="process"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit" file="HttpAdapter.java" line="454" method="handle"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.HttpAdapter" file="HttpAdapter.java" line="250" method="handle"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.servlet.ServletAdapter" file="ServletAdapter.java" line="140" method="handle"/>
                      <ns2:frame class="weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke" file="HttpServletAdapter.java" line="319" method="run"/>
                      <ns2:frame class="weblogic.wsee.jaxws.HttpServletAdapter" file="HttpServletAdapter.java" line="232" method="post"/>
                      <ns2:frame class="weblogic.wsee.jaxws.JAXWSServlet" file="JAXWSServlet.java" line="310" method="doPost"/>
                      <ns2:frame class="javax.servlet.http.HttpServlet" file="HttpServlet.java" line="727" method="service"/>
                      <ns2:frame class="weblogic.wsee.jaxws.JAXWSServlet" file="JAXWSServlet.java" line="87" method="service"/>
                      <ns2:frame class="javax.servlet.http.HttpServlet" file="HttpServlet.java" line="820" method="service"/>
                      <ns2:frame class="weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction" file="StubSecurityHelper.java" line="227" method="run"/>
                      <ns2:frame class="weblogic.servlet.internal.StubSecurityHelper" file="StubSecurityHelper.java" line="125" method="invokeServlet"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletStubImpl" file="ServletStubImpl.java" line="292" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletStubImpl" file="ServletStubImpl.java" line="175" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction" file="WebAppServletContext.java" line="3594" method="run"/>
                      <ns2:frame class="weblogic.security.acl.internal.AuthenticatedSubject" file="AuthenticatedSubject.java" line="321" method="doAs"/>
                      <ns2:frame class="weblogic.security.service.SecurityManager" file="SecurityManager.java" line="121" method="runAs"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext" file="WebAppServletContext.java" line="2202" method="securedExecute"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext" file="WebAppServletContext.java" line="2108" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletRequestImpl" file="ServletRequestImpl.java" line="1432" method="run"/>
                      <ns2:frame class="weblogic.work.ExecuteThread" file="ExecuteThread.java" line="201" method="execute"/>
                      <ns2:frame class="weblogic.work.ExecuteThread" file="ExecuteThread.java" line="173" method="run"/>
                   </ns2:stackTrace>
                </ns2:exception>
             </detail>
          </S:Fault>
       </S:Body>
    </S:Envelope>
    So, I was reading a lot of threads, those said to copy the structure, but it doest not work.
    I tried to check the "Do Not Use SOAP Envolve", but when I did that I got this error.
    Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type
    When I unchecked I got this error.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM_RecursosHumanos_ServicioEmplead~</SAP:P1>
      <SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
      <SAP:P3>on: Cannot create target element /ns0:Fault. Value</SAP:P3>
      <SAP:P4>s missing in queue context. Target XSD requires a~</SAP:P4>
      <SAP:AdditionalText />
      <SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_RecursosHumanos_ServicioEmplead~; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:Fault. Values missing in queue context. Target XSD requires a~</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    I could never see the Fault Structure in PI and neither in Web Service Navigator.
    Please, I need some help.
    Thank you very much.
    Regards

    If I test it in Soap UI I get the Fault, and in WsNavigator I can see the FaultCode and FaultString as a message on the top of the page.
    I do not know what more to do.
    <S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
       <S:Body>
          <S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope">
             <faultcode>S:Server</faultcode>
             <faultstring>Error al insertar Domicilio en servicio Empleado</faultstring>
             <detail>
                <FaultException:FaultException xsi:nil="true" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.interacciones.com.mx/ServicioEmpleado/" xmlns:FaultException="http://www.interacciones.com.mx/ServicioEmpleado/"/>
                <ns2:exception class="mx.com.interacciones.servicioEmpleado.FaultException_Exception" note="To disable this feature, set com.sun.xml.ws.fault.SOAPFaultBuilder.disableCaptureStackTrace system property to false" xmlns:ns2="http://jax-ws.dev.java.net/">
                   <message>Error al insertar Domicilio en servicio Empleado</message>
                   <ns2:stackTrace>
                      <ns2:frame class="mx.com.interacciones.servicioEmpleado.ServicioEmpleadoImpl" file="ServicioEmpleadoImpl.java" line="87" method="agregarEmpleado"/>
                      <ns2:frame class="sun.reflect.NativeMethodAccessorImpl" file="NativeMethodAccessorImpl.java" line="native" method="invoke0"/>
                      <ns2:frame class="sun.reflect.NativeMethodAccessorImpl" file="NativeMethodAccessorImpl.java" line="39" method="invoke"/>
                      <ns2:frame class="sun.reflect.DelegatingMethodAccessorImpl" file="DelegatingMethodAccessorImpl.java" line="25" method="invoke"/>
                      <ns2:frame class="java.lang.reflect.Method" file="Method.java" line="597" method="invoke"/>
                      <ns2:frame class="weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker" file="WLSInstanceResolver.java" line="101" method="invoke"/>
                      <ns2:frame class="weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker" file="WLSInstanceResolver.java" line="83" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.InvokerTube$2" file="InvokerTube.java" line="152" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.sei.EndpointMethodHandler" file="EndpointMethodHandler.java" line="264" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.sei.SEIInvokerTube" file="SEIInvokerTube.java" line="93" method="processRequest"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="604" method="__doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="563" method="_doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="548" method="doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="445" method="runSync"/>
                      <ns2:frame class="com.sun.xml.ws.server.WSEndpointImpl$2" file="WSEndpointImpl.java" line="275" method="process"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit" file="HttpAdapter.java" line="454" method="handle"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.HttpAdapter" file="HttpAdapter.java" line="250" method="handle"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.servlet.ServletAdapter" file="ServletAdapter.java" line="140" method="handle"/>
                      <ns2:frame class="weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke" file="HttpServletAdapter.java" line="319" method="run"/>
                      <ns2:frame class="weblogic.wsee.jaxws.HttpServletAdapter" file="HttpServletAdapter.java" line="232" method="post"/>
                      <ns2:frame class="weblogic.wsee.jaxws.JAXWSServlet" file="JAXWSServlet.java" line="310" method="doPost"/>
                      <ns2:frame class="javax.servlet.http.HttpServlet" file="HttpServlet.java" line="727" method="service"/>
                      <ns2:frame class="weblogic.wsee.jaxws.JAXWSServlet" file="JAXWSServlet.java" line="87" method="service"/>
                      <ns2:frame class="javax.servlet.http.HttpServlet" file="HttpServlet.java" line="820" method="service"/>
                      <ns2:frame class="weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction" file="StubSecurityHelper.java" line="227" method="run"/>
                      <ns2:frame class="weblogic.servlet.internal.StubSecurityHelper" file="StubSecurityHelper.java" line="125" method="invokeServlet"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletStubImpl" file="ServletStubImpl.java" line="292" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletStubImpl" file="ServletStubImpl.java" line="175" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction" file="WebAppServletContext.java" line="3594" method="run"/>
                      <ns2:frame class="weblogic.security.acl.internal.AuthenticatedSubject" file="AuthenticatedSubject.java" line="321" method="doAs"/>
                      <ns2:frame class="weblogic.security.service.SecurityManager" file="SecurityManager.java" line="121" method="runAs"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext" file="WebAppServletContext.java" line="2202" method="securedExecute"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext" file="WebAppServletContext.java" line="2108" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletRequestImpl" file="ServletRequestImpl.java" line="1432" method="run"/>
                      <ns2:frame class="weblogic.work.ExecuteThread" file="ExecuteThread.java" line="201" method="execute"/>
                      <ns2:frame class="weblogic.work.ExecuteThread" file="ExecuteThread.java" line="173" method="run"/>
                   </ns2:stackTrace>
                </ns2:exception>
             </detail>
          </S:Fault>
       </S:Body>
    </S:Envelope>

  • "Configure Proxy in SOAP Receiver"

    Hi ,
    Can some one help in providing me the information regarding "Configuration of proxy in SOAP receiver adapter (PI 7.1).
    Thanks ..

    Hi Stefan,
    I have my Proxy Values ,the Host and the Port ...even then i am facing some issues., I want to know are there any other details which needs to provided inorder to configure proxy ...(My receiver  is a 3rd party Webservice outside the firewall.)
    Do i need to check the conversion parameters.
    Error:
    SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: "*********************************". at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest() at System.Web.Services.Protocols.SoapServerProtocol.RouteRequest(SoapServerMessage message) at System.Web.Services.Protocols.SoapServerProtocol.Initialize() at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response) at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)</SAP:AdditionalText>
      <SAP:Stack />
    Edited by: Madhusree  Nagalla on Oct 28, 2010 3:28 PM
    Edited by: Madhusree  Nagalla on Oct 28, 2010 3:29 PM

  • Proxy to SOAP scenario-With Attachment and Mapping

    I have a scenario to be developed, it is a Proxy to SOAP sceanrio.
    There are about 8 fields coming from Proxy.
    Can we create an attachment from these fields.
    Also we have to do a mapping of this attachment to a field in the target External Defination and also 2 fields of the 8 have to mapped to the other respective fields of the external defination.
    All this has to be posted on a webservice through SOAP with
    the 2 fields in payload and
    the attachment in the attachemnt section of the message
    Could this be achieved?

    In ABAP proxy you create a message with the two fields which you need for main SOAP message.
    The attachment is created exactly how it is requested from web service.
    You create a String with the XML (including tags) and do a codepage conversion to UTF-8 (or whatever is requested)
    Note: The payload is created in UTF-8 automatically, the attachment is treated as binary.
    You can also use a Java mapping for creating the attachment, if you have good Java skills, but I recommend to use program code for one purpose only on one place.

  • Proxy to SOAP

    HI Experts ,
    Have a query.
    We have a proxy to SOAP scenario in which there is a requirement that once the request parameters are going on to the webservice there can be a chance that the webservice is down or authentication parameters are wrong. In that case we require a reply back to the request after certain time that the request couldnt be processed due to either failure of authentication parameters or some other reason.
    Basically what we want is that we want that request to wait wait for certain amount of time , if not successful gives back message to the wizard after certain attempts say 2.
    How can we achieve this . Where can we do these settings in PROXY or IN SAP PI.
    Need your inputs.
    Regards,
    Saras

    there can be a chance that the webservice is down or authentication parameters are wrong
    in such a case PI/XI itself will throw an alert in SXMB_MONI...your task will be to capture that particular and send it back to the SAP system......
    I dont know how BPM will capture such types of alert.....
    There is a blog by Bhavesh...explaining how to throw an alert if the end system is down...implemented using an UDF in message mapping...just search you will get it easily
    this is the blog:
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    Edited by: abhishek salvi on May 15, 2009 11:01 AM

Maybe you are looking for

  • Unwanted yahoo search when open new tab, can't remove it.

    I have picked up yahoo search and it won't remove. doesn't appear in add ons or toolbars or programs on computer or in registry. I deleted and reloaded firefox and its still there. yahoo is not in my search engines.

  • Subreport within a subreport

    Post Author: Tony CA Forum: .NET I understand that in the .NET version of Crystal Reports you can't do a subreport within a subreport (one level deep only).  Is this just a limitation of the version that comes with Visual Studio 2005 or is this also

  • I have Lightroom 4 final version: I downloaded beta CS6 and it overwrote CS5 Photoshop in LR4

    1st. is my question in the wrong forum? If not, I downloaded beta vers. CS6 (yippeee) and it overwrote PS CS5 in LR only. Yes, I still have CS5 on my computer, it didnt overwrite it. Can you please tell me how to bring PS CS5 back into LR4? Thanks ev

  • How to find out the current hostname?

    How do I find out the current hostname for a given SoaSuite installation? Peter

  • Critical structure corruption error

    Hi, I installed autodesk inventor Pro 2014 and it required me to firstly install a windows installer patch before it could open. Now it works fine the only problem is that, my PC always restarts and I get a blue screen(critical structure corruption e