Proxy triggering in central instance but not in application

Hi friends,
There is one report which triggers the proxy. but this is not triggering in application servers and it is working fine when i trigger it in central instance.
In this case i am executing this report in background and at that  time i can't check whether it is executing in central or application.
i need to do any configuration in application servers so that this error will not come..
And when i am updateing the sap tables by server proxy it is gettinng struck in queue and each time i need activate the queus.. if i need to execute this interface at nights this should not happen..
so for all these we need to do any settings..
Regards
Vijay

Hi,
>>And when i am updateing the sap tables by server proxy it is gettinng struck in queue and each time i need activate the queus.. if i need to execute this interface at nights this should not happen..
Make sure that You have cleared all the Strucked messages from the Queues before doing the bellow steps.
Goto SMQR and just Delete all the Queues.
Goto SXMB_ADMManage Queues-Just Say Register Queues Dont say Activate and all.
Now try to execute the scenario and this time it shld floe the message
REgards
Seshagiri

Similar Messages

  • HT1911 I just verified my Apple user ID and password but certain updates won't download (gives me the signal that I'm incorrect).  I keep changing it, verifying but not all applications let me proceed.

    I just verified my Apple user ID and password but certain updates won't download (gives me the signal that I'm incorrect).  I keep changing it, verifying but not all applications let me proceed.  So I can't download itunes software updates or update my iphone even though I have just verified my info.  I know others that have this problem but can't get support to resolve it.

    Hi mpellichero,
    Thanks for visiting Apple Support Communities.
    The steps in this article can help if you are being asked for the password to your previous Apple ID:
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/TS5223
    Best Regards,
    Jeremy

  • What's the best way to erase content but not the applications?

    I'm giving away my iMac to my niece. I want to erase all my  content files, libraries ,etc., but not the applications. What's the best way to do this, and to do it securely?

    If you have Downloaded and Upgraded to Lion See...
    Here is an excerpt of the SLA; the Lion license (purchased from MAS) is NOT transferable. The SLA is quite clear:
    B. If you obtained your license to the Apple Software from the Mac App Store or on Apple-branded physical media, it is not transferable. If you sell your Apple-branded hardware to athird party, you must remove the Apple Software from the Apple-branded hardware beforedoing so, and you may restore your system to the version of the Apple operating systemsoftware that originally came with your Apple hardware (the “Original Apple OS”) andpermanently transfer the Original Apple OS together with your Apple hardware, provided that:(i) the transfer must include all of the Original Apple OS, including all its component parts,printed materials and its license; (ii) you do not retain any copies of the Original Apple OS, fullor partial, including copies stored on a computer or other storage device; and (iii) the partyreceiving the Original Apple OS reads and agrees to accept the terms and conditions of theOriginal Apple OS license.
    Now Proceed...
    Boot from the original OS installer disk and do an Erase & Install.
    When the Mac reboots into Mac Setup Assistant Quit and shut it down.
    When the New Owner Boots it up it's a brand new Mac... just like when you got it.
    ( The Original Install Disc(s) should also be included with the sale )
    http://www.ehow.com/how_5852122_restore-imac-factory-settings.html

  • I can't see firefox. But, In windows task manager, firefox shows as a process but not an application. Icon shows in the tray.

    I downloaded and reinstalled firefox to try to eliminate an aggravation- playtopus. Now it doesn't load onto my desktop. I see the icon in the tray. In Task Manager I see firefox listed as a process. But not an application.
    tks.

    Check this
    *http://kb.mozillazine.org/Firefox.exe_always_open
    *https://support.mozilla.org/en-US/kb/firefox-already-running-not-responding

  • Job triggered at Central Instance

    Hi
    an abap program will trigger several jobs to run at the central instance.
    Question:  More than one job will run simultaneously or will run a job at a time?
    I need that only one job runs at a time in the central instance.
    Thanks in advance.
    Gaia

    Hi Marcin
    Thanks for your response.
    It is not possible one job with steps, because it is a program that will run several times and each time will trigger a job at the central instance. But I need that this job does not run simultaneously.  
    I think that it will be necessary control it with parameters at job_close function.
    Thanks.
    Gaia

  • SFTP/FTP Proxy Problems - Works for DMZ but not for Internet Hosts?!

    Hi together,
    we have a strange problem with our TMG Proxy, some infrastructure informations first
    So we have the Client LAN with the IP range 192.168.11.x which is routeable to Server LAN 192.168.3.x but not to DMZ LAN 192.168.200.x.. The TMG is a 2 Node Array, 192.168.200.5 is the DMZ VIP. TMG DMZ IP Adress (192.168.200.5) and physical Adresses have
    an NAT relation to one Public IP. HTTPS Inspection is active. We dont use (and dont want to) the TMG Client component.
    When i use WinSCP, Putty or Filezilla and connect to a DMZ LAN Host (192.168.200.x) with "HTTP Proxy" (192.168.3.108:8080) everything is fine, it works like expected...
    When i connect to an Internet Host it fails regardless which protocol i use - ftp, sftp or ssh. The error i get is
    "The token supplied to the function is invalid."
    An example for a failed SFTP Connection
    Filezilla
    Status: Connecting to system.internet.de...
    Trace: Going to execute "C:\Program Files (x86)\FileZilla FTP Client\fzsftp.exe"
    Response: fzSftp started
    Trace: CSftpControlSocket::ConnectParseResponse(fzSftp started)
    Trace: CSftpControlSocket::SendNextCommand()
    Trace: CSftpControlSocket::ConnectSend()
    Command: proxy 1 "tmg.local" 8080 "domain\user" "***********"
    Trace: CSftpControlSocket::ConnectParseResponse()
    Trace: CSftpControlSocket::SendNextCommand()
    Trace: CSftpControlSocket::ConnectSend()
    Command: open "[email protected]" 22
    Trace: Looking up host "system.internet.de"
    Trace: Connecting to 192.168.3.108 port 8080
    Trace: Proxy error: 502 Proxy Error ( Das Token, das der Funktion übergeben wurde, ist ungültig.  )
    Error: Proxy error: 502 Proxy Error ( Das Token, das der Funktion übergeben wurde, ist ungültig.  )
    Trace: CControlSocket::DoClose(64)
    Trace: CSftpControlSocket::ResetOperation(66)
    Trace: CControlSocket::ResetOperation(66)
    Error: Could not connect to server
    Trace: CFileZillaEnginePrivate::ResetOperation(66)
    TMG protocol throws this
    Protokolltyp: Webproxy (Forward)
    Status: 0x80090308 
    Regel: Webzugriff FTP Test
    Quelle: Intern (192.168.11.31:44673)
    Ziel: Extern (78.46.182.171:22)
    Anforderung: system.internet.de:22
    Filterinformationen: Req ID: 106f1cb7; Compression: client=No, server=No, compress rate=0% decompress rate=0%
    Protokoll: https-inspect
    Benutzer: domain\user
    Hope you can explain me what we doin wrong or how to find out whats the problem. I didn`t find many informations about "0x80090308" or "The token supplied to the function is invalid.". Disabling HTTPS Inspection for the Source 192.168.11.31
    doesnt change anything...
    Connection to an DMZ Host looks like this:
    Filezilla
    Status: Connecting to system.dmz...
    Trace: Going to execute "C:\Program Files (x86)\FileZilla FTP Client\fzsftp.exe"
    Response: fzSftp started
    Trace: CSftpControlSocket::ConnectParseResponse(fzSftp started)
    Trace: CSftpControlSocket::SendNextCommand()
    Trace: CSftpControlSocket::ConnectSend()
    Command: proxy 1 "tmg.local" 8080 "domain\user" "***********"
    Trace: CSftpControlSocket::ConnectParseResponse()
    Trace: CSftpControlSocket::SendNextCommand()
    Trace: CSftpControlSocket::ConnectSend()
    Command: open "[email protected]" 22
    Trace: Looking up host "system.dmz"
    Trace: Connecting to 192.168.3.108 port 8080
    Trace: Server version: SSH-2.0-OpenSSH_6.6.1p1 Ubuntu-2ubuntu2
    Trace: Using SSH protocol version 2
    Trace: We claim version: SSH-2.0-PuTTY_Local:_Mar_28_2014_10:34:48
    Trace: Doing Diffie-Hellman group exchange
    Trace: Doing Diffie-Hellman key exchange with hash SHA-256
    Trace: Host key fingerprint is:
    TMG Protocol
    Protokolltyp: Webproxy (Forward)
    Status: 0 Der Vorgang wurde erfolgreich beendet. 
    Regel: Webzugriff FTP Test
    Quelle: Intern (192.168.11.31:48818)
    Ziel: Umkreis 2 (192.168.200.205:22)
    Anforderung: system.dmz:22
    Filterinformationen: Req ID: 10727dce; Compression: client=No, server=No, compress rate=0% decompress rate=0%
    Protokoll: SSL-tunnel
    Benutzer: domain\user
    Thanks in advance.
    Regards
    Matthias

    Hi Keith,
    ok i found out the problem is https inspection is enabled....
    - when i disable https inspection for source, same problem
    - when i disable https inspection for destination, problem solved
    the root cause why this worked is we had https inspection disabled for dmz destinations.
    there is no direct route relation between the lan and dmz.
    why is source exception not working in this?

  • Weird - can connect to both instances - but not to main SID

    As a newbie to RAC I got stuck...
    after installation of grid, db SW and a sample DB "QRC" with dbca I can connect to both instances QRC1 and QRC2,
    but not to QRC - here sqlplus tells me "connected to an idle instance"
    What did I mix up??
    rac11a ~ RDBMS > srvctl start database -d QRC -o open
    PRCR-1004 : Resource ora.qrc.db is already running
    rac11a ~ RDBMS >
    [root@rac11a ~]# crsctl status res -t
    NAME TARGET STATE SERVER STATE_DETAILS
    Local Resources
    ora.LISTENER.lsnr
    ONLINE ONLINE rac11a
    ONLINE ONLINE rac11b
    ora.asm
    OFFLINE OFFLINE rac11a
    OFFLINE OFFLINE rac11b
    ora.eons
    ONLINE ONLINE rac11a
    ONLINE ONLINE rac11b
    ora.gsd
    OFFLINE OFFLINE rac11a
    OFFLINE OFFLINE rac11b
    ora.net1.network
    ONLINE ONLINE rac11a
    ONLINE ONLINE rac11b
    ora.ons
    ONLINE ONLINE rac11a
    ONLINE ONLINE rac11b
    Cluster Resources
    ora.LISTENER_SCAN1.lsnr
    1 ONLINE ONLINE rac11b
    ora.LISTENER_SCAN2.lsnr
    1 ONLINE ONLINE rac11a
    ora.LISTENER_SCAN3.lsnr
    1 ONLINE ONLINE rac11a
    ora.oc4j
    1 OFFLINE OFFLINE
    ora.qrc.db
    1 ONLINE ONLINE rac11a Open
    2 ONLINE ONLINE rac11b Open
    ora.rac11a.vip
    1 ONLINE ONLINE rac11a
    ora.rac11b.vip
    1 ONLINE ONLINE rac11b
    ora.scan1.vip
    1 ONLINE ONLINE rac11b
    ora.scan2.vip
    1 ONLINE ONLINE rac11a
    ora.scan3.vip
    1 ONLINE ONLINE rac11a
    [root@rac11a ~]#
    rac11a ~ RDBMS > tnsping qrc
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 02-FEB-2012 09:20:54
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = qrcscan.ddnett.de)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = QRC.ditanett)))
    OK (40 msec)
    rac11a ~ RDBMS > env | grep ORA
    dbms_type=ORA
    ORACLE_SID=QRC
    ORACLE_BASE=/oracle/QRC
    ORACLE_HOME=/oracle/QRC/11202
    rac11a ~ RDBMS >
    rac11a ~ RDBMS > sqlplus " / as sysdba"
    SQL*Plus: Release 11.2.0.1.0 Production on Thu Feb 2 09:21:04 2012
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    Connected to an idle instance.
    SQL>
    rac11a ~ RDBMS > lsnrctl status
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 02-FEB-2012 08:23:25
    Uptime 0 days 1 hr. 16 min. 21 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /oracle/LOCAL/GRID/11202/network/admin/listener.ora
    Listener Log File /oracle/LOCAL/BASE/diag/tnslsnr/rac11a/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.2.141)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.2.241)(PORT=1521)))
    Services Summary...
    Service "QRC.ditanett" has 1 instance(s).
    Instance "QRC1", status READY, has 1 handler(s) for this service...
    Service "QRCXDB.ditanett" has 1 instance(s).
    Instance "QRC1", status READY, has 1 handler(s) for this service...
    The command completed successfully
    rac11a ~ RDBMS >
    rac11b ~ RDBMS > lsnrctl status
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 02-FEB-2012 08:24:02
    Uptime 0 days 1 hr. 17 min. 12 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /oracle/LOCAL/GRID/11202/network/admin/listener.ora
    Listener Log File /oracle/LOCAL/BASE/diag/tnslsnr/rac11b/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.2.142)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.2.242)(PORT=1521)))
    Services Summary...
    Service "QRC.ditanett" has 1 instance(s).
    Instance "QRC2", status READY, has 1 handler(s) for this service...
    Service "QRCXDB.ditanett" has 1 instance(s).
    Instance "QRC2", status READY, has 1 handler(s) for this service...
    The command completed successfully
    rac11b ~ RDBMS >

    Hi,
    after installation of grid, db SW and a sample DB "QRC" with dbca I can connect to both instances QRC1 and QRC2,
    rac11a $ env | grep ORA
    dbms_type=ORA
    ORACLE_SID=QRC
    ORACLE_BASE=/oracle/QRC
    ORACLE_HOME=/oracle/QRC/11202
    rac11a ~ RDBMS >
    rac11a $ sqlplus " / as sysdba"
    SQL*Plus: Release 11.2.0.1.0 Production on Thu Feb 2 09:21:04 2012
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    Connected to an idle instance.
    SQL>
    The Oracle System ID (SID) is used to uniquely identify a particular database on a system. For this reason, one cannot have more than one database with the same SID on a host.
    When using RAC, all instances belonging to the same database must have unique SID's even using different hosts.
    So, you must set ORACLE_SID to QRC1 where Instance 1 is running or QRC2 where Instance 2 is running.
    To know where instance number is running you can get this info following steps below:
    $GRID_HOME/bin/olsnodes -n
    lnxora01        1
    lnxora02        2In example above all instance created by DBCA on lnxora01 will have prefix 1 (e.g db QRC will have QRC1) and on lnxora02 will have prefix 2. (it's not a rule, because I can set manually the number of instance as I wish)
    Or exists another way to find it: (on local node)
    ps -ef |grep pmon
    ora_pmon_QRC1 So, to connect just set right ORACLE_SID
    eg:
    export ORACLE_SID=QRC1
    sqlplus / as sysdbaRegards,
    Levi Pereira

  • URLConnection with Proxy (yeah URL's again but not simmilar to others;))

    Hy all,
    What i try to do: getting the content of a website over a Proxy.
    Well it took me some time to google and stuff and i found out this is something many ppl. are stuck at.
    The most common solution to do that is something like where i am at this point, there is a commented version of the code at the
    end of this post (And please note that my exception Handling should be taken as a 'how to not do' solution^^).
    public static void main(String[] args){
            java.net.URL url = null;
            URLConnection  con = null;
            InputStream in = null;
            String user = "usr";
            String passwd = "�pwd";
            try{
              url = new URL("http", "anyProxy.com", 80, "http://www.google.ch");
              con = url.openConnection();
            }catch(Exception e){
                e.printStackTrace();
            con.setDoInput(Boolean.TRUE);
            con.setReadTimeout(10);
            con.setRequestProperty("Accept","text/xml,text/*,text/html");
            con.setRequestProperty("Cache-Control","no-cache");
            con.setRequestProperty("Proxy-Authorization", "Basic " + new sun.misc.BASE64Encoder().encode((user + ":" + passwd).getBytes()) );
            try{
                con.connect();
                in = con.getInputStream();
            }catch(IOException e){
                e.printStackTrace();
            BufferedReader reader = new BufferedReader(new InputStreamReader(in));
            String fullFile = "";
            try{
                for (String line = ""; line != null; line = reader.readLine()) {
                   fullFile += line;
            }catch(Exception e){
                e.printStackTrace();
            try{in.close();reader.close();}catch(Exception e){e.printStackTrace();};
            url = null;
            con = null;
            in = null;
            reader = null;
            System.out.println(fullFile);
        }So after this you should be able to read a url... but wait, there is MY problem, i get the content of the proxyserver delivered but not the site i want the content to be delivered AFTER passing the proxy (google in this case).
    I found about 30 Forums/ Posts that recomend that solution, 1 or 2 are mentioned that there wont be any content of the following site (google in this example) but NONE of these has a solution or a link to any informations how to solve that problem.
    Thank you for taking the time to read this Post, also thank you for any tips/links etc. that could solve this problem.
    I wish you a nice day;)
    Regards
    Balsi
    The commented solution should not be taken to seriously, this is how I interprete the solution and how i assume it works. It should not be taken
    word by word but at least help to understand a bit. Please post any badly wrong informations so i can delete/ change the comment, there is enoth
    of wrong information already out there...
    public static void main(String[] args){
            /*The URL just specifies a Resource, which means stuff like:
             *    - Protocoll => Which protocoll is needet, http, ftp, file etc. (File is used if URL represents a local file)
             *    - Adress, Proxys usw. Check out the API for overall Informations
            java.net.URL url = null;
            /*The URLConnections represents a specified Connection, note that the connection from
             *url.getConnection() is not yet a successfull connection to the adress specified
            URLConnection  con = null;
            //The InputStream will be used to get the Data from the Site
            InputStream in = null;
            //This is a proxy User if a proxy is between you and the internet
            String user = "usr";
            //This is the pw you need to authentificate  the user defined above when connecting to the proxy
            String passwd = "pwd";
            try{
            /* The Url now gets inicialised, the delivered parameters are:
             * String protocol: The protocoll we want to use (since we use a Proxy its http)
             * String host: The Proxyserver itself, can be the dns name or the ip
             * int Port: The Proxyservers port he's listening and accepting requests
             * String file: The URL we want to get after Proxy authentification
            url = new URL("http", "anyProxy.com", 80, "http://www.google.ch");
            /* We now open the connection, note that opening the connection does not mean
             * accutally connecting to a server! It just represents a Connection, in the real
             * World this would be the idear to open a browser and later type in a Url and press enter
            con = url.openConnection();
            }catch(Exception e){
                e.printStackTrace();
            // We need to indicate that we want to read content from that connection by setting true
            con.setDoInput(Boolean.TRUE);
            // Timeout if needet, default is somewhere between 10-30secs
            con.setReadTimeout(10);
            //Filter what date this connection accepts
    //        con.setRequestProperty("Accept","text/xml,text/*,text/html");
            //Filter weather we accept cached site data
            con.setRequestProperty("Cache-Control","no-cache");
            /* Now this is important, we specifie that this Connection will use a Proxy by setting the Attribute
             * Proxy-Authorizasion to a Base64 Encoded value which contains our user as well as the Password
            con.setRequestProperty("Proxy-Authorization", "Basic " + new sun.misc.BASE64Encoder().encode((user + ":" + passwd).getBytes()) );
            try{
            /* We now finally acctually connect to the server this is equal to pressing enter inside a
             * We-explorer such as IE, Mozilla etc. after typing in a URL
             * NOTE: This is not the same like IE, Mozilla etc. displaying something afterwards!
             *       (No worry, this will come soon)
            con.connect();
            /* There we go, we connected to the server and open a InputStream to get the data from it
            in = con.getInputStream();
            }catch(IOException e){
                e.printStackTrace();
            // We use a BufferedReader to read the InputStream
            BufferedReader reader = new BufferedReader(new InputStreamReader(in));
            // For now we use a String, note that a StringBuffer would be more effective looking at the performance
            String fullFile = "";
            try{
                for (String line = ""; line != null; line = reader.readLine()) {
                   fullFile += line;
            }catch(Exception e){
                e.printStackTrace();
            /* It's very recomendet to close all the connections/streams etc. especially if your application
             * isnt just a mainprogramm like this to show a simple example. If you would open serval connetions
             * parallely (Threads) not closing the streams/connections will fastly kill your memory;)
            url = null;
            con = null;
            //expecially the Streams&Buffers need to be closed but can throw a exception while trying it
            try{in.close();reader.close();}catch(Exception e){e.printStackTrace();};
            in = null;
            System.out.println(fullFile);
        }

    Hy and thanks for the fast replie, i will check out the Authenticator as well as the java.net.Proxy for further information, hopefully i get a sollution i then can post here;)
    Yeah, i wanted to comment that readTimeout but forgot, doesnt seem to work for me, no matter what i set there (had ranges from 1- 99999) the timeout always occurs after about 20 seconds (but it could also be that there is something like a not working authentication mechanism abortin my connection hu?)
    Well, going to check out the other two classes mentioned, of course going to reward you if this gets me to my aim;)
    Regards
    Balsi
    (oh well and sorry for my probably not that nice english, not my motherlanguage;))

  • Place file in central instance(AIX/UNIX) from Application server in Windows

    Hi guys,
    We have the central instance running in AIX and app servers in AIX/UNIX as well. now we want to replace the app server by windows server.
    so central instance remain as AIX/unix server and app server becomes Windows NT.
    then how can i place a file in my central instance while using this Windows based app server... because open dataset with forward slash (/usr/sap/) will be not be interpretated by windows,
    so i used logical file name.. and kept both windows and unix path..
    unix path as /usr/sap/tmp/<File_Name>
    and windows path as
    servername\usr\sap\tmp\ and even tried with
    usr\sap\tmp\
    nothing worked.. when i used open dataset fetching the path from logical path, it ways unable to open the file..

    Hi,
    you can't directly open file on central instance if you are not connected to it. You have access only to files which are on application server which you are connected to. If you want to have a folder which will be accessible from all application servers then you need to map folder on application server to folder on central instance.
    To solve the issue with different paths for different operating systems you can use transaction FILE. Here you can define a logical filename where you can configure different paths for different syntax groups such as UNIX or WINDOWS NT. You can use FM FILE_GET_NAME to get valid path for application server.
    Cheers

  • Mail showing unread messages in dock but not in application

    At first it was just on one of my computers but now it is on all three of my computers and they each show a different number. I have dleeted my mail accounts and then readded them in mail preferences and that works for a sec but not for very long. it is very annoying....

    In System Preferences > Notification Center, select Mail in the left hand column, and check the box, "Badge app icon" toward the bottom on the right.

  • Central instance can not startup when i install the SAP /DB2 9 env

    Hi,
    could  anybody help me?   I just installed the SAP /db2 V9.1 on HACMP cluster envrioment . By now , the SCS, ASCS, DB instance installation have been  OK, Unfortunately , an
    error occurs when I installed the CI.
    the error message is that "ABAP Database db must be started on remote server "  i check the trans.log , the error message is "DbSlConnect to 'AE1' as 'sapae1' failed"  the detail informatioin ,please check the the following trans.log.  but i can startup and activate the database, i can connect to db with sapae1 and sapae1 user with password. 
    first i install the DB2 software and db2 instance with the virtual hostname dbae1. i found the hostname in the db2cfg.log is not virtual hostname but physical name. i don't know what happens.  In order to keep the hostname the same, i installed the CI on sapaix01, the error message is the same as before.  i have upgrade the sap kernel and reinstall the CI again, the error is the same as before too Could you give me some suggestion.
    First  let me describe our cluster enviroment
    For CI, and DI are not a Single point of failure  , so the DI and CI
    are out of cluster.     The cluster enviroment just includes the
    SCSASCS and DB instance. SCSASCS is installed on sapaix02, DB instance is installed on sapaix01
       1. Host name 
    sapaix01  : DB instance and DI  (visual hostname dbae1)
    sapaix02:   SCS,ASCS, CI        (visual hostname scsae1)
      2. file systems  (sapaix01 DB instance )
    Sapaix01
    Filesystem    512-blocks      Free %Used    Iused %Iused Mounted on
    /dev/hd4         6291456   4792544   24%     2808     1% /
    /dev/hd2        13107200   6175040   53%    73295    10% /usr
    /dev/hd9var     13107200  12816904    3%     1336     1% /var
    /dev/hd3        61603840  35610304   43%     3844     1% /tmp
    /dev/fwdump       786432    785656    1%        4     1%
    /var/adm/ras/platform
    /dev/hd1         1048576   1016152    4%      213     1% /home
    /proc                  -         -    -         -     -  /proc
    /dev/hd10opt     4194304   2512624   41%     6241     3% /opt
    /dev/lvusrsapae1d10   41943040  41935984    1%        4     1%
    /usr/sap/AE1/D10      (Local file system)
    /dev/lvdb2ae1   20971520  20927640    1%       38     1% /db2/AE1
    /dev/lvdb2logs   20971520  18346424   13%       25     1%
    /db2/AE1/log_dir
    /dev/lvdb2archive   41943040  41935984    1%        4     1%
    /db2/AE1/log_archive
    /dev/lvae1sapdata1  104857600  18817168   83%       47     1%
    /db2/AE1/sapdata1
    /dev/lvae1sapdata2  104857600  18817400   83%       48     1%
    /db2/AE1/sapdata2
    /dev/lvae1sapdata3  104857600  18817184   83%       48     1%
    /db2/AE1/sapdata3
    /dev/lvae1sapdata4  104857600  18817168   83%       48     1%
    /db2/AE1/sapdata4
    /dev/lvdb2db2ae1   20971520  19874760    6%     3931     1% /db2/db2ae1
    /dev/lvae1saptemp   20971520  20967584    1%       12     1%
    /db2/AE1/saptemp1
    /dev/lvdb2db2as   10485760  10483504    1%        4     1% /db2/db2as
    /dev/lvae1db2dump   10485760  10470600    1%        8     1%
    /db2/AE1/db2dump
    scsae1:/export/usr/sap/trans   20971520  20967592    1%       16     1%
    /usr/sap/trans
    scsae1:/export/sapmnt/AE1   12582912   9886168   22%     1529     1%
    /sapmnt/AE1
    10.241.13.54:/software2 1755152384 1154051696   35%    62702     1%
    /software2
    For the database version is 9.1 , so I installed the db2 software in
    /db2/db2ae1/v9 , and db2 client software in /opt/IBM/db2/V9.1  (for DI)
    on sapaix01,  db2 client software in /opt/IBM/db2/V9.1  (I installed the
    db software with virtual hostname dbae1 not sapaix01 )
    sapaix02
    Filesystem    512-blocks      Free %Used    Iused %Iused Mounted on
    /dev/hd4         6291456   4915592   22%     2790     1% /
    /dev/hd2        13107200   6177120   53%    73643    10% /usr
    /dev/hd9var     13107200  12857456    2%     1311     1% /var
    /dev/hd3        21495808  16955192   22%     3283     1% /tmp
    /dev/fwdump       786432    785656    1%        4     1%
    /var/adm/ras/platform
    /dev/hd1         1048576   1046848    1%      105     1% /home
    /proc                  -         -    -         -     -  /proc
    /dev/hd10opt     4194304   2197776   48%     9002     4% /opt
    /dev/lvusrsapae1   20971520  20966872    1%       47     1% /usr/sap/AE1
    /dev/lvae1ascs01   10485760  10243360    3%       86     1%
    /usr/sap/AE1/ASCS01
    /dev/lvae1scs00   20971520  20706584    2%       97     1%
    /usr/sap/AE1/SCS00
    /dev/lvsapmntae1   12582912   9886168   22%     1529     1%
    /export/sapmnt/AE1
    /dev/lvusrsaptrans   20971520  20967592    1%       16     1%
    /export/usr/sap/trans
    scsae1:/export/sapmnt/AE1   12582912   9886168   22%     1529     1%
    /sapmnt/AE1
    scsae1:/export/usr/sap/trans   20971520  20967592    1%       16     1%
    /usr/sap/trans
    10.241.13.54:/software2 1755152384 1154051696   35%    62702     1%
    /software2
    3. hosts file    the file is the same on sapaix01 and sapaix02
    10.241.13.121   dbae1
    10.241.13.125   scsae1
    10.10.11.1      sapaix01_boot1
    10.10.11.2      sapaix02_boot1
    10.10.10.1      sapaix01_boot2
    10.10.10.2      sapaix02_boot2
    10.241.13.71    sapaix01  sapaix01_per
    10.241.13.72     sapaix02 sapaix02_per
    4. the installation guide and error message  please check the attachment
    <<installation_and errorlog.zip>>
    5. I run  db2ilist command  nothing disppear
    I have another questions
    *      whether does DB2 9.1  support installation on the diffirence
    directory (default is /opt/IBM/db2/V9.1 my installation is
    /db2/db2ae1/V9)?
    *      Whether does DB2 9 installation has some relationship with
    hostname ?
    *       Why  db2ilist command result is nothing after I finished the
    DB instance installation ?
    trans.log 
    "trans.log" 143 lines, 14041 characters
    4 ETW000 R3trans version 6.14 (release 700 - 15.06.07 - 15:50:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 10.03.2008 - 20:25:40
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Mon Mar 10 20:25:40 2008                              70  0.000070
    4 ETW000  [dev trc     ,00000]  db_con_init called                                    25  0.000095
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                             42  0.000137
    4 ETW000  [dev trc     ,00000]  Loading DB library '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' ...
    4 ETW000                                                                              60  0.000197
    4 ETW000  [dev trc     ,00000]  load shared library (/usr/sap/AE1/SYS/exe/run/dbdb6slib.o), hdl 0
    4 ETW000                                                                            1018  0.001215
    4 ETW000  [dev trc     ,00000]  Library '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' loaded
    4 ETW000                                                                              39  0.001254
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
    4 ETW000                                                                              43  0.001297
    4 ETW000  [dev trc     ,00000]  Version of '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' is "700.08", patchlevel (0.133)
    4 ETW000                                                                             282  0.001579
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
    4 ETW000                                                                              42  0.001621
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
    4 ETW000                                                                              43  0.001664
    4 ETW000  [dev trc     ,00000]  New connection 0 created                              29  0.001693
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
    0, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              50  0.001743
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                         41  0.001784
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:
    4 ETW000                                                                              40  0.001824
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
    , con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              47  0.001871
    4 ETW000  [dev trc     ,00000]  DB2 library successfully loaded DB2 library '/db2/db2ae1/sqllib/lib64/libdb2.a(shr_64.o)' suc
    cessfully loaded
    4 ETW000                                                                            9175  0.011046
    4 ETW000  [dev trc     ,00000]  DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
    4 ETW000                                                                              42  0.011088
    4 ETW000  [dev trc     ,00000]  DB6 shared library (dbdb6slib) patchlevels            24  0.011112
    4 ETW000  [dev trc     ,00000]    (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
    4 ETW000                                                                              42  0.011154
    4 ETW000  [dev trc     ,00000]    (0.8) Support of SDBUPDEXCL (note 847616)           25  0.011179
    4 ETW000  [dev trc     ,00000]    (0.9) DB6: use export file for dbdb6slib (note 835135)
    4 ETW000                                                                              40  0.011219
    4 ETW000  [dev trc     ,00000]    (0.9) DB6: Core in getAndBindSQLDA (note 833183)
    4 ETW000                                                                              39  0.011258
    4 ETW000  [dev trc     ,00000]    (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
    4 ETW000                                                                              51  0.011309
    4 ETW000  [dev trc     ,00000]    (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
    4 ETW000                                                                              40  0.011349
    4 ETW000  [dev trc     ,00000]    (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
    4 ETW000                                                                              40  0.011389
    4 ETW000  [dev trc     ,00000]    (0.17) DB6: special characters in sidadm passwd (note 865839)
    4 ETW000                                                                              40  0.011429
    4 ETW000  [dev trc     ,00000]    (0.21) DB6: no SAP_INFO comments (note 873889)
    4 ETW000                                                                              39  0.011468
    4 ETW000  [dev trc     ,00000]    (0.22) DB6: hints: get correlation names from view texts (note 868888)
    4 ETW000                                                                              41  0.011509
    4 ETW000  [dev trc     ,00000]    (0.23) DB6: hints: get correlation names from view texts (note 868888)
    4 ETW000                                                                              41  0.011550
    4 ETW000  [dev trc     ,00000]    (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
    4 ETW000                                                                              40  0.011590
    4 ETW000  [dev trc     ,00000]    (0.27) DB6: activate value compression (note 886231)
    4 ETW000                                                                              40  0.011630
    4 ETW000  [dev trc     ,00000]    (0.28) DB6: optimization guidelines on views part 2 (note 868888)
    4 ETW000                                                                              40  0.011670
    4 ETW000  [dev trc     ,00000]    (0.30) DB6: no SQL trace for SQLCancel (note 892111)
    4 ETW000                                                                              40  0.011710
    4 ETW000  [dev trc     ,00000]    (0.33) DB6: append SAP_TA comment (note 873889)
    4 ETW000                                                                              39  0.011749
    4 ETW000  [dev trc     ,00000]    (0.34) DB6: activate value compression with quoted names (note 886231)
    4 ETW000                                                                              41  0.011790
    4 ETW000  [dev trc     ,00000]    (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
    4 ETW000                                                                              41  0.011831
    4 ETW000  [dev trc     ,00000]    (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
    4 ETW000                                                                              41  0.011872
    4 ETW000  [dev trc     ,00000]    (0.50) DB6: reread passwords for secondary connections (note 931742)
    4 ETW000                                                                              41  0.011913
    4 ETW000  [dev trc     ,00000]    (0.52) DB6: double quote table names in optguidelines (note 868888)
    4 ETW000                                                                              41  0.011954
    4 ETW000  [dev trc     ,00000]    (0.54) DB6: error handling in DBSL CLP (note 940260)
    4 ETW000                                                                              39  0.011993
    4 ETW000  [dev trc     ,00000]    (0.69) DB6: technical support of DB2 CLI driver (note 962892)
    4 ETW000                                                                              40  0.012033
    4 ETW000  [dev trc     ,00000]    (0.73) DB6: log table name on TRUNCATE failure (note 970743)
    4 ETW000                                                                              40  0.012073
    4 ETW000  [dev trc     ,00000]    (0.79) DB6: column type XML in index size calculation (note 982993)
    4 ETW000                                                                              41  0.012114
    4 ETW000  [dev trc     ,00000]    (0.82) DB6: CAST for SSTRING data types (note 989568)
    4 ETW000                                                                              47  0.012161
    4 ETW000  [dev trc     ,00000]    (0.86) DB6: long runtimes for R3szchk (note 1000847)
    4 ETW000                                                                              39  0.012200
    4 ETW000  [dev trc     ,00000]    (0.88) DB6: patch collection Dec 06 (note 1005574)
    4 ETW000                                                                              40  0.012240
    4 ETW000  [dev trc     ,00000]    (0.96) DB6: patch collection Jan 07 (note 1017852)
    4 ETW000                                                                              39  0.012279
    4 ETW000  [dev trc     ,00000]    (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
    4 ETW000                                                                              41  0.012320
    4 ETW000  [dev trc     ,00000]    (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
    4 ETW000                                                                              41  0.012361
    4 ETW000  [dev trc     ,00000]    (0.107) DB6: patch collection Apr 07 (note 1047194)
    4 ETW000                                                                              39  0.012400
    4 ETW000  [dev trc     ,00000]    (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
    4 ETW000                                                                              41  0.012441
    4 ETW000  [dev trc     ,00000]    (0.113) DB6: work process type in application snapshot (note 1059905)
    4 ETW000                                                                              41  0.012482
    4 ETW000  [dev trc     ,00000]    (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
    4 ETW000                                                                              41  0.012523
    4 ETW000  [dev trc     ,00000]    (0.117) DB6: patch for execution of long DDL statements (note 1069658)
    4 ETW000                                                                              41  0.012564
    4 ETW000  [dev trc     ,00000]    (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
    4 ETW000                                                                              41  0.012605
    4 ETW000  [dev trc     ,00000]    (0.123) DB6: CLP commands on Windows with V9.1 (note 1080149)
    4 ETW000                                                                              40  0.012645
    4 ETW000  [dev trc     ,00000]    (0.124) DB6: Set DB2CODEPAGE=819 for non-Unicode (note 1084400)
    4 ETW000                                                                              40  0.012685
    4 ETW000  [dev trc     ,00000]    (0.126) DB6: reuse optguidelines on FAE statements (note 1087375)
    4 ETW000                                                                              41  0.012726
    4 ETW000  [dev trc     ,00000]    (0.126) DB6: Enforce DB2CODEPAGE=819 for non-Unicode environments (note 1084400)
    4 ETW000                                                                              42  0.012768
    4 ETW000  [dev trc     ,00000]    (0.128) DB6: db6_free on invalid memory area (note 1092030)
    4 ETW000                                                                              40  0.012808
    4 ETW000  [dev trc     ,00000]    (0.133) DB6: statement cache enhancements (note 1101031)
    4 ETW000                                                                              40  0.012848
    4 ETW000  [dev trc     ,00000]  Supported features:                                   24  0.012872
    4 ETW000  [dev trc     ,00000]  ..retrieving configuration parameters                 24  0.012896
    4 ETW000  [dev trc     ,00000]  ..done                                               126  0.013022
    4 ETW000  [dev trc     ,00000]  Running with UTF-8 Unicode                            25  0.013047
    4 ETW000  [dev trc     ,00000]  *** ERROR in DB6Connect[dbdb6.c, 1640] CON = 0 (BEGIN)
    4 ETW000                                                                           67222  0.080269
    4 ETW000  [dev trc     ,00000]  &+     DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL30082N  Security processing failed
    with reason "24" ("USERNAME
    4 ETW000                                                                              48  0.080317
    4 ETW000  [dev trc     ,00000]  &+     AND/OR PASSWORD INVALID").  SQLSTATE=08001
    4 ETW000                                                                              45  0.080362
    4 ETW000  [dev trc     ,00000]  &+
    4 ETW000                                                                              45  0.080407
    4 ETW000  [dev trc     ,00000]  &+
    4 ETW000                                                                              46  0.080453
    4 ETW000  [dev trc     ,00000]  &+
    4 ETW000                                                                              45  0.080498
    4 ETW000  [dev trc     ,00000]  *** ERROR in DB6Connect[dbdb6.c, 1640] (END)          26  0.080524
    4 ETW000  [dbdb6.c     ,00000]  *** ERROR => DbSlConnect to 'AE1' as 'sapae1' failed
    4 ETW000                                                                              71  0.080595
    2EETW169 no connect possible: "DBMS = DB6                              --- DB2DBDFT = 'AE1'"

    Hi,
    have you tried to connect on the command line (instead of using R3trans) ?
    db2 connect to AE1 user sapae1 using .....
    If this works and you have verified that the DB2DB6EKEY is set properly, use dscdb6up to update the password in the password file dscbd6.conf.
    Then try again to use R3trans to connect.
    Best regards,
      Jens

  • Query works fine in DEV instance but not in PROD instance

    Hi,
    I got an exceptional situation. I wrote a query to get the sign-on audit information. The query works fine in Development instance and executes within 2 seconds. But if i run the same query in production instance it does not finish execution. I checked for around 2 hours and after that i just stopped it. Does any one have any idea to find about the problem like to check temporary table space or any other thing please let me know. so that i can suggest the DBA to check for those parameters.
    RDBMS : 11.1.0.7.0
    Oracle Applications : 12.1.3
    I am using Oracle SQL Developer 2.1.1.64
    I am missing TOAD so much. My current organization dont have license to use TOAD.
    Regards,
    Syed

    If your compnay does not have a Toad License, then you can use OracleSqlDeveloper.
    Its free to use and made by Oracle.
    You should post a query execution plan
    explain plan for <your sql_statement>
    and then issue this command:
    select * from table(dbms_xplan.display());It's best if you spool the output through sqlplus and then post it up here.
    I see you are using Sqldeveloper. The latest release is 3.2 which was only released within the last month.
    Edited by: Keith Jamieson on Oct 25, 2012 1:21 PM
    Added sqldeveloper note

  • Wi-Fi Proxy settings work in Safari, but not recognised by other apps?

    Hi all,
    At home, my iPod Touch (gen two, Firmware 2.2.1) connects fine to our wireless router and all applications (e.g. Safari, Tap Tap Revenge 2 etc) can access the internet. We have no proxy setting at home..
    Then, at uni we use special "manual http" proxy settings and had to jump through a bunch of hoops downloading certificates etc. I can connect fine to this wireless network at uni. Safari works perfectly with these settings, as expected.
    However when I try and access the internet from another application (for example, Youtube or Mail) the request will time out. My assumption is that it is because these applications are not using the proxy settings that i set -- whereas Safari is, and is therefore working normally. The same issue occurs on every other application besides Safari when connecting to the web. Keep in mind this all works at home.
    I don't think it is an issue with things being blocked by the uni, as we can get Live Messenger working fine on our laptops there. In fact there is documentation provided by the uni to connect to the wireless from an iPod/iPhone.
    Does anyone know why the other applications (including ones coming default on the phone) are ignoring these proxy settings?
    Thought i might ask here, as I'm not back at uni until tuesday.
    Thanks in advance.

    Proxy Settings may be set by connection however - that does not imply that all of the services provided by Apple Utilise these connections.
    *iPod Touch - No Firmware Updates Applied*: Able to use services like Google Maps, YouTube, Weather
    (Confirmed on 3 iPod Touches)
    *iPod Touch - Latest Firmware Updates Applied:* Unable to use services like Google Maps, YouTube, Weather. (Confirmed that this connection fails on 2/3 that have been upgraded, one is still pre v2 firmware and connects fine)
    Both iPod Touches are configured identically - with a static IP address, differing by one digit.
    Same DNS, Same Gateway, Same Proxy IP Address, Same Username/Password.
    The issue is not caused by configurations, it is caused by a difference in how authenticate proxy configurations are handled between the firmware supplied with a pre v2 iPod Touch, and the updated v2 firmware.
    Perhaps v3 will resolve this issue, but at this time if you have any choice, do not upgrade further iPod Touches to v2 if you require internet access via an authenticated proxy in applications such as Maps, Weather, Mail etc.
    Message was edited by: Caledai

  • Mthd  ON_SAVE of  CL_STEP_SIGNATURE_POC triggered in 4.7 but not in ECC6.0

    Hi Experts,
    We are doing upgrade from 4.7 to 6.0.
    In 4.7 when we send process messages with CO54 and  CO60 the method ON_SAVE of  class CL_STEP_SIGNATURE_POC is triggered updating entries in tables TC74 and TC71.
    But in 6.0 the method ON_SAVE of  class CL_STEP_SIGNATURE_DS_POC is triggered. This method is empty in 6.0 and so not updating entries in tables. The method  is protected method. So we cannot call it from any other class.
    Can anybody tell any way out.
    Thanks in advance.

    Did you resolve this issue? Do you know why TC74 is not being updated

  • People picker works in Central Admin but not other site collections

    Hello
    I am having a sudden problem with adding users to permissions for document libraries. It appears to only affect the main site collection. The people picker displays some users that are already in site collection when you start typing letters of the name
    of the user. However at some point in the typing the message appears "sorry we're having trouble reaching the server." The problem does not occur in Central Admin when adding permissions. Using Fiddler there is an error when I get the message "sorry..."
    "500, HTTP, SERVERNAME, /_vti_bin/client.svc/ProcessQuery." Also when I go to the library and select "shared with" I get error "Unexpected response from server. The status code of response is '500'. The status text of response
    is 'System.ServiceModel.ServiceActivationException'." I believe they are connected. Any help is appreciated.

    Hi Jeffrey,
    Please try to verify “HTTP Activation” feature per the article below:
    http://blog.karstein-consulting.com/2014/02/18/sharepoint-2013-people-picker-error-sorry-were-having-trouble-reaching-the-server/
    Are you using custom FBA provider for web application other than CA site which might be causing misconfiguration in web.config?
    Could you please provide more complete related error message from ULS log for troubleshooting?
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for