Proxy (WithAcknowledgements) to Mail Scenario

Hi,
I am doing Proxy to mail Scenario ..and trying to send the Proxy with Attachments. After executing ClientProxy when i check in PI moni_sxmb.. i got error regarding HTTP...
Can anyone tell me where i have to check regarding this ..
The error in the moni is
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3 />
<SAP:P4 />
Regards,
Deepthi

check below links.....
HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
HTTP_RESP_STATUS_CODE_NOT_OK - Error in ABAP proxy

Similar Messages

Receiver agreement fails in Proxy to Mail Scenario ( B2B)

Hi All,
I have a proxy to mail Scenario. It is an B2B scenario. I communicate on the sender side via a Business System and on the receiver via a Business Service.
This is a Proxy to mail scenario. I test via the test configuration tool. The sender agreement, Receiver detemination, Interface detemination runs fine.
The failure occurs in the receiver agreement. It fails saying " NO standard agreement found" .
I did the the following checks
1. Checked whether the Agreement is active
2. Checked the name of the Communication component and Interface. all ran well
What could be the issue. Why can sender agreement fail.
Can anyone please help.
Thanks
Abhishek

Hi All,
I have a proxy to mail Scenario. It is an B2B scenario. I communicate on the sender side via a Business System and on the receiver via a Business Service.
This is a Proxy to mail scenario. I test via the test configuration tool. The sender agreement, Receiver detemination, Interface detemination runs fine.
The failure occurs in the receiver agreement. It fails saying " NO standard agreement found" .
I did the the following checks
1. Checked whether the Agreement is active
2. Checked the name of the Communication component and Interface. all ran well
What could be the issue. Why can sender agreement fail.
Can anyone please help.
Thanks
Abhishek

File - BPM (RFC) - Mail Scenario

My scenario is File to Mail scenario thru BPM. in BPM I need to make RFC Call. I set ASMA in File sender adapter and File Nmae is not accessible in BPM Mapping. we are PI7.0 SP12. Im sure this is possible but for some reason not working. Any clue ?

Hi,
>>So Q1: Im not getting Filename into BPM though I checked ASMA in the Sender File Adapter
You cannot take the filename (using Dynamic Configuration) in Message Mapping inside BPM transformation step. So I will propose to take it before entering into BPM.
>>Q2: I need to send attachment name as Dynamic which I should get from the Input Message. we are on PI7.0 SP12.
Check the blogs in sdn, you will get more idea on this. If I get any I will reply back
Regards
Suraj

JDBC to Mail scenario with XSLT mapping

Hi all,
I am working on JDBC to Mail scenario. We have to pick the data from Oracle system and mail has to be sent with an attached Excel file.
I am doing this scenario by using of following blog.
eMail Report as Attachment (Excel/Word)
I am getting the output as an attachment but iam not getting the data.
the same xslt coding iam using which has given in blog.
any idea........
Thanks,
Sreedhar Goud.

Hi Gaurav,
JDBC is picking the data.In SXMB_MONI outbound payload iam able to see the data but in inbound payload there is no data.i think the problem is in XSLT code only.
My source structure:
<?xml version="1.0" encoding="utf-8" ?>
<ns:MT_ORMS_Errors xmlns:ns="http://mg.adityabirla.com/mg/orms/mail">
    <row>
        <INTERFACE_NAME>MG_SAP_RMS_ITEM_PKG</INTERFACE_NAME>
        <RECORD_DETAIL>Item</RECORD_DETAIL>
        <ERROR>item</ERROR>
        <CREATE_DATE>2008-11-03 00:00:00.0</CREATE_DATE>
        <MAIL_SENT>N</MAIL_SENT>
    </row>
</ns:MT_ORMS_Errors>
XSLT code:
<?xml version='1.0'?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:variable name="break"><br></xsl:variable>
<xsl:variable name="tableB"><table></xsl:variable>
<xsl:variable name="tableE"></table></xsl:variable>
<xsl:variable name="trB"><tr></xsl:variable>
<xsl:variable name="trE"></tr></xsl:variable>
<xsl:variable name="tdB"><td></xsl:variable>
<xsl:variable name="tdE"></td></xsl:variable>
<xsl:variable name="nbsp">&nbsp;</xsl:variable>
<xsl:variable name="thB"><tr BGCOLOR="#CCCC99"></xsl:variable>
<xsl:template match="/">
   <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
    <Subject>Deliveries from XI</Subject>
    <From></From>
    <To></To>
    <Content_Type>application/vnd.ms-excel</Content_Type>
    <Content>
     <xsl:text xsl:space="preserve">These deliveries has been completed:</xsl:text>
     <xsl:value-of select="$break"/>
     <xsl:value-of select="$break"/>
     <xsl:value-of select="$tableB"/>
     <xsl:value-of select="$thB"/>
     <xsl:value-of select="$tdB"/>
     <xsl:text xsl:space="preserve">INTERFACE_NAME</xsl:text>
     <xsl:value-of select="$nbsp"/>
     <xsl:value-of select="$tdE"/>
     <xsl:value-of select="$tdB"/>
     <xsl:text xsl:space="preserve">RECORD_DETAIL</xsl:text>
     <xsl:value-of select="$nbsp"/>
     <xsl:value-of select="$tdE"/>
     <xsl:value-of select="$tdB"/>
     <xsl:text xsl:space="preserve">ERROR</xsl:text>
     <xsl:value-of select="$nbsp"/>
     <xsl:value-of select="$tdE"/>
     <xsl:value-of select="$tdB"/>
     <xsl:text xsl:space="preserve">CREATE_DATE</xsl:text>
     <xsl:value-of select="$nbsp"/>
     <xsl:value-of select="$tdE"/>
     <xsl:value-of select="$trE"/>
    <xsl:for-each select="MT_ORMS_Errors/row">
      <xsl:value-of select="$trB"/>
      <xsl:value-of select="$tdB"/>
      <xsl:value-of select="INTERFACE_NAME"/>
      <xsl:value-of select="$nbsp"/>
      <xsl:value-of select="$tdE"/>
      <xsl:value-of select="$tdB"/>
      <xsl:value-of select="RECORD_DETAIL"/>
      <xsl:value-of select="$nbsp"/>
      <xsl:value-of select="$tdE"/>
      <xsl:value-of select="$tdB"/>
      <xsl:value-of select="ERROR"/>
      <xsl:value-of select="$nbsp"/>
      <xsl:value-of select="$tdE"/>
      <xsl:value-of select="$tdB"/>
      <xsl:value-of select="CREATE_DATE"/>
      <xsl:value-of select="$nbsp"/>
      <xsl:value-of select="$tdE"/>
      <xsl:value-of select="$trE"/>
     </xsl:for-each>
     <xsl:value-of select="$tableE"/>
    </Content>
   </ns1:Mail>
</xsl:template>
</xsl:stylesheet>
Thanks,
Sreedhar Goud.

IDOC- XI- Mail Scenario

Hi All,
I am configuring IDOC-XI-Mail scenario using following web-log:
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
I follow following steps:-
1) In IR-create Name Space -"http://sap.com/xi/XI/Mail/30 "
2) In IR-Upload XSD file from SAP note: 748024
3) In IR-Do message mapping with Imported IDOC
4) In ID-Add Business System's for SAP & XI
5) In ID-Create mail receiver communication channel
(URL/User ID/Password/User Mail Package only)
When I test trigger IDOC from SAP, I get Error in SXMB_MONI
(Error category:RCVR_DETERMINATION, Error ID:NO_RECEIVER_CASE_ASYNC)
Is i need to do more configuration's in IR & ID that is not explained in Web-log?
Is there is any other configuration need to be done on server to send mails?
Please guide me in completing Idoc->Mail scenario.
Thanks & Regards

Hi Rohan,
"4) In ID-Add Business System's for SAP & XI"
You donot have to create a business system for XI.
First of all you can either create a business system which needs to be created in SLD such that it is pointing to your target system (which here is the mail server) or you can use a business service. Choose any one of them.
"When I test trigger IDOC from SAP, I get Error in SXMB_MONI
(Error category:RCVR_DETERMINATION, Error ID:NO_RECEIVER_CASE_ASYNC)"
Check if you have defined your message interfaces correctly. Since you are not expecting any response from the mail adapter, the inbound and outbound interfaces should be asynchronous.
Also check if you have defined your receiver determination correctly. Here you should give the source and target systems and interfaces correctly. The problem sems to lie here. Check these configurations once again.
Regards,
Sushumna

How to configure receiver communication channel in File to mail scenario?

Hi all,
I'm working in FIle-to-Mail Scenario. I did all the required configuration In Integration repository. As per my Scenario whenever a text file stored in Application server of the R/3 system. it should be sent as a attchment with a mail.so i set a sender communication channel with file adapter in sender R/3 system . i dont know which business system should i refer for my receiver communication channel.because my receiver end is a mail server. should i create any third party business system for this one?
can anyone suggest me to define a receiver comm channel in a right manner?
helpful answers will be rewarded.

Hi,
Check these
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
Regards
Seshagiri

Error in File to Mail Scenario

Hi All,
I am getting the following errror at adapter level in File to Mail Scenario in XI production
Mail: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: java.io.IOException: server not responding OK to RCPT TO; 554 Relay access denied
In XI development the scenario is working fine. I also checked with basis people for the configurations of the two servers and it is same.
Can any one suggest the possible ways to solve the above error.
Regards
Prakash

Hi All,
I tried with one more SMTP server in both development and production , In development mail is going. But in production i am facing the following error in receiver adapter.
Mail: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: java.net.ConnectException: Connection refused
Exception caught by adapter framework: java.net.ConnectException: Connection refused
Delivery of the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.net.ConnectException: Connection refused.
Kindly provide some solution to solve the above errors.
Regards
Prakash

SOA - real time proxy to web service scenario

Hello Experts,
I am working on PI but really very much new to the SOA concept.
But i have to prepare document which explains about all steps that we need to follow (technicallly) for the SOA implementation.
We are going to implement one Proof of Concept for SOA before going for the real project.
Can someone please help me and tell me what all the things i need to do for Proxy to Web Service Scenario in PI.
I hope i have made myself clear about it.
Thanks,
Hetal

Hi Gaurav,
Thanks for your advice.
I have one more question and i tried to explore SDN alot but didnt get satisfactory answer.
here is the situation:
My scenario is like :
.Net application = consumer
ECC = Provider
PI = broker
SR = Publish ES
I am using the Outside - In approach, where i am creating proxy structure in ESR and then creating/ Generating Proxy in ECC.
I am exposing my Inbound Interface on SR, so that the WSDL is available on SR.
Now the situation is, our consumer is asking data from us in different format.
I read on help.sap.com that via PI mapping it is possible.
But i am not understanding that consumer is using ECC WSDL to make a call, then even though mapping is there, how can they get response in their required format.
They are even providing us their WSDL. I am totally confused that in one interface how come two different WSDLs can work?
Or is there a way for this?
I am even ready to use the same structure for my ECC which is provided by consumer, but then i dont see any outcome using PI.
I also have question, that for standard service also, ECC Enterprise service structure is fixed which we expose, then using PI how can we provide consumers response in their desired way.
I know that m asking this question again and again, but still it is not getting clear to me... might be m not understanding that how it works in SOA.
If possible can you tell me the steps that i need to follow technically to develope this interface? so that i can get better understanding?
Thanks,
Hetal

File to Mail Scenario error

Hi All,
I did file to mail scenario. The source structure contain the following elements like <to>....</to>, <Subject>........</subject> etc (the source structure created by me). In Integration Directory I set the Mail adapter Message protocol as "XIPAYLOAD" and Mail attribute "Use Mail Package" selected. So here my scenario should send a mail to which has i given "To Id" in my source structure. But when i go to SXMB_MONI, I found my message as red flag and it is showing information like "thrown during application mapping". Here what is the problem and how can i rectify the problem, please any one help me,
Thanks & Regards,
Satish,

Hi,
you should add your email address to your user,add specific users list add you r user in alrtcatdef.
generally you should maitain the email data type format like
subject,from,to,content-type..
se below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
Regards
Chilla..

Idoc to Mail Scenario

Hi Experts,
My scenario is Idoc to Mail scenario..
In thie scenario the mail should be delivered to the specific DL (Group Email-ids,DL-> Distribution List) with dynamic subject line so while delivering the mail based on the contents of the Idoc the subject line of the mail will be changed,
For this reason we need to use Mail Package, if so then how to define the structre in the email adapter.
required output in mail is as follow:
Subject LIne: Purchase Order Number;
Email Body :
Delivery Date:
Ship Date:
PO Number:
Desc:
Qty:
So the email body has 5 attributes as delivery date, ship date, PO number, desc, qty;
The email body should go as an attachment with the name "Company Name"+PONumber.csv
Can anyone throw some light regarding to this scenario..
Thanks,
--Kishore

Hi
For Mail package use this structure.
<?xml version="1.0" encoding="UTF-8"?>
<ns:Mail xmlns:ns="http://sap.com/xi/XI/Mail/30">
<Subject>Subject</Subject>
<From>nameaATcompany.com</From>
<To>namebATcompany.com</To>
<Reply_To />
<Content_Type>text/plain</Content_Type>
<Content>
payload
</Content>
</ns:Mail>
alternativ you can use Adapter-Specific Message Attributes like SHeaderSUBJECT
take a look at this blog as well:
/people/samuel.chandrasekaran2/blog/2008/10/06/xi-mail-adapter-dynamically-building-attachment-and-message-body-content-using-a-simple-udf
regards,
Robin

File To Mail Scenario Clarification

Hi!
Can someone help me with this....
1)In a File To Mail Scenario, while selecting the mail server, do we need to select only the mail server or we can select any server...I mean, when I was doing this scenario, I selected my Windows 2003 server....as the mail server and the url as smtp://ipaddress....Also, I tested it, by putting the Source payload in the FTP server......Then, used SXMB_MONI to check the file....I saw the success flag... My question here is, how to check the mail......Can, you give me the step by step instructions for testing the File to Mail scenario....
2)I loaded Eclipse on my system, How to open that (execute that)...I mean...I want to learn Java Mappings..Where should I put the code.....etc.... Step by step instructions with screen shots please....
Thanks....

>>2)I loaded Eclipse on my system, How to open that (execute that)...I mean...I want to learn Java Mappings..Where should I put the code.....etc.... Step by step instructions with screen shots please....
Open the "eclipse.exe" and go on help. It will say how to create your first java project. Once you are comfortable with tool then go for Java Mapping. (Efficient way of learning
thanks
Farooq

File to mail scenario

In file to mail scenario how can we send a document/image as an attachment along with the data?

Go thru this link. It contains demos on how to work with Mail adapter
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/110ff05d-0501-0010-a19d-958247c9f798#xi [original link is broken]
Have a look at these weblogs ....
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/sravya.talanki2/blog/2006/01/12/xi-triggering-e-mails-with-multiple-attachments--problems
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
Regards,
Shabari

SFTP to Mail Scenario

Hi
Am trying to Pass an PDF file using the sFTP to Mail scenario. i also have to keep the same file name of the source.
(ie Attachment should have the source file name). i have tried all the possible ways to do it but the files get stuck up at the Mail adapter with error
Exception caught by adapter framework: com.sap.aii.messaging.util.XMLScanException: java.lang.NullPointerException; nested exception caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 25, 50, 44(:main:, row:1, col:3)(:main:, row=1, col=3) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 25, 50, 44(:main:, row:1, col:3)
I am not able to use the MM as there are some special charcter coming in the PDF document.
Currently am using the JAVA Mapping to pass the file name and the data.
Experts please help.

Hi,
Find below link will helpful for configuration, but as per my knowledge file name at attachment will take as message id. Check it with below link, i hope it will work
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure

Mail-to-Mail scenario - Problem with comm. channel not reading message

Good day,
I am setting up a Mail-to-Mail scenario, where a received e-mail with an attachment is both processed into a file, as well as a monitoring e-mail needs to be send. The attachment processing is an existing process and is still working properly, but my e-mail isn't send. I am using Java mapping to create the destination e-mail based on the source e-mail. Everything is set up in the Directory as well, and through the Test Configuration feature I have tested my new addition to the existing process, I am seeing the result that I am expecting. I have sent a test message and XI picks it up just fine and processes it which is tested by both SXMB_MONI and the resulting file from the attachment.
However, the monitoring e-mail is not sent. Using the runtime workbench, there is an error in the receiver communication channel, being the following error from the Audit Log:
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: com.sap.aii.messaging.util.XMLScanException: java.lang.NullPointerException; nested exception caused by: java.io.IOException: Parsing an empty source. Root element expected!
Looking through the Message Content, I notice there is a SOAP document describing the source message and two payloads. The first payload being the source message in XML format, the second payload is entirely empty. I suspect this empty second payload is causing the NullPointerException, but I am at a loss as to why the payload is empty. The Test Configuration showed me that the message gets through just fine, so what is going wrong?
Here is a link to the configuration of the communication channel, maybe something is wrong here: [Config of communication channel|http://roald.hoolwerf.net/images/cc-config.png]
My question is: What can I do to find what is causing the communication channel to receive an empty payload, and how can I solve this?
Searching for this issue, or the given error on both Google as these forums hasn't given any related posts, if I did miss them in that case I am sorry for posting and please refer to the related topics.
Thank you in advance for taking time to look at this question.
Kind regards,
Roald Hoolwerf
Edited by: Roald Hoolwerf on Feb 1, 2010 3:57 PM

Try this.
Unchecked the configure use authentication.
and use mail package (base64)

Xml file to mail scenario with zip file as an attachment

Hi experts,
I have a file to mail scenario. File is in xml format.
At receiver side, first I want to zip this file and send the zip file as an attachment using mail adapter.
How can i achieve this?
Regards
Divia

Hi Shabarish,
In the module tab i have specified the below beans
localejbs/AF_Modules/MessageTransformBean                           contentType
AF_Modules/PayloadZipBean                                                    zip
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean           mail
In the module configuration i mentioned as
Transform.ContentDescription   file
Transform.ContentDisposition   attachment:filename="file.xml"
zip.filenameKey                      contentType
zip.mode                                zipOne
Now i am getting the mail with zip file as an attachment.But the name of the attachment i got is MainDocument.zip
Even the file name inside the zip is MainDocument.xml.
How can i specify my own file name for both zip file and the file inside the archieve folder.Please help me.
Regards
Divia

Proxy (WithAcknowledgements) to Mail Scenario

Similar Messages

Maybe you are looking for