Proxy (XI) Adapater vs Mail adapter

Hello All
Is it possible to configure an XI sender communication channel with a Receiver mail adapter communication channel.
I have read the blogs and the forums regarding mail and proxy adapter ?
Have someone performed this scenario yet ?
Please let me know and send me specific details regarding it .

This is what I want :
The secario will use xi adapter and mail adapter.
The xi adapter will be the sender and the mail adapter will be the receiver.
With my abap proxy I will read the information of two fields and I will send this
this information by mail to the mail adapter.
Many thanks

Similar Messages

Mail Adapter: original Attachment filename retrieval in Proxy

Hi,
I have a Sender Mail Adapter, and the receiver is a proxy, where I need to get the attachment and its details.
When I execute
attachment_filename = l_attachment->GET_DOCUMENT_NAME( ).
it simply returns Attachment-1 etc.
How do I get the original attachment filename?
I am on SP16.
Regards,
Puloma.

HI
Please refer tihs thread for mail attchments
Re: Handling attachments of mail
Scenario to pick the mail with its attachments into XI\Re: Infrastructure required for Mail Adapter

Proxy for Sender Mail Adapter

Hi All,
I wanted to know if it is possible to specify/configure a proxy server for a sender mail adapter communication channel (similar to SOAP adapter)?
Thanks,
Sumant.

specify/configure a proxy server
It should not be mandatory to use the proxy server. That usually depends upon the landscape.
Do I need to deploy any certificates on the XI server?
Again, this is not mandatory. Only if you need to configure S/MIME based communication, you need to enter certificate entries in keystore.
Regards,
Prateek

Receive CSV attachment via Mail Adapter and process into ABAP proxy

Hi,
I have the following scenario:
1. Receive e-mail with CSV attachment
2. Process through Mail adapter (KeepAttachments = Yes in order to retain the CSV attachment)
3. Receive into ABAP proxy (with CSV attachment)
The next step is to read the attachment in the ABAP proxy and process the CSV attachment data into CRM.
The CSV attachment contains the data I wish to process - the body of the e-mail will not contain this information.
The problem I have is reading the attachment data in the proxy - not sure of the methods/class to call - anyone got any ideas ?
Another question is this the best way to do this and process the CSV attachment data ?
I know I could use the PayloadSwapBean to switch the payload to the attachment but then I am stumped with how the attachment is processed through PI 7.1 - how do you transform the CSV format payload into XML so PI will be able to process it through mapping.
Either option is viable - an answer to either question would be great.
1. How do you read the attachment data in an inbound ABAP proxy ?
2. How do you transform the CSV attachment data after the PayloadSwapBean from CSV to XML ?
Kind regards
Colin.

Hi Colin
As you are not interested in processing the body of email. Swap the payload to the attachment using the PayloadSwapBean
Change the content from CSV to XML using MessageTransformBean. Now pass this information to Proxy. You dont need to deal with attachments in proxy.
It is not possible to read attachment in server proxy because the class and interface you create will not have data type which can refer to an attachment processing interface in ABAP.
Thanks
Gaurav

Mail adapter = XI = CRM (using Proxy)

Hi All,
I have to pull several mailboxes using a sender mail adapter. The mails are automatically generated, containing:
mailfrom, mailto, subject, body and 1 attachment.
I need to save the data (mailfrom,mailto,subject,body,filename) into a table in SAP-CRM and I need to store the file on the application server.
I can successfully map the mailinfo (mailfrom,mailto,subject,body) using the ximail_30.xsd; the problem comes with the attachment.
When the message comes in I got 2 payloads (MailMessage en MailAttachment-1 (base64))
My question now is, how do I have access (in XI or a step further in the Proxy) to the Attachment (filename and content) so I can map it to a structure (XI) or save it within the Proxy, without converting it in XI.
thanks in advance,
Andre.

Michal,
Thanks for your response.
I saw your weblog, but I wonder, if I swap the payload, I'll be missing the rest of the mail (like mailfrom, mailto, subject and content) ?
I just can't believe that I can't access the 2nd payload in the message...
thanks again and regards,
Andre.

Proxy to Mail Adapter issue

Hi Experts,
I have a requirement like a control report is comming from SAP through proxy to XI and I need to send that control report as an attachment in excel format from XI to the 3rd party by the mail adapter.Also in the mail body I have to send the information what is there in the excel.
Now as I have not worked before in mail adapter I want to know how can I send the report as an attachment in a mail adapter that too in excel format format and how can I do the mail body?
Thanks and Regards
Atanu Mazumdar

AFAIK there is no standard solution in PI to convert the xml message sent by proxy as an xls attachmet. You may have to plugin adapter modules to your receiver email com channels to achieve this. first step would be to convert the xml to flat structure using MessageTransformBean, you could then use the payloadswapbean to convert the payload to an attachment and name it with a .csv extension(which can be opened in excel). If you are looking at xls file creation, you could chk the links http://wiki.sdn.sap.com/wiki/display/XI/CODE-CreateanExcelFileviatheJExcel+API , /people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
Thanks
Saravana

Proxy to Http scenario and use of mail adapter

Hi Experts,
                 I am doing a Scenario in which we get Purchase order request(asynchronously) from SRM system in proxy xml format which we have to map to Cxml format send it to third party system(say system 2) as http request.Then we will recieve a response from system2 in Cxml format through HTTP.Now,we have to map this response as acknowledgement to SRM system via proxy if successful or error for the PO created or have some error.If error we also have to mail to the purchasing department about the error occured via mail adapter.I am confused how to start with ,as Proxy to XI is a asynchronous communication and XI to System2 is a synchronous communication as i am understood.Then again XI to SRM is a asynchronous communication via proxy.
I have request and response External defination for Cxml i.e HTTP side.May be i am wrong if we can do this req and response as asynchronously also.Please give me right way of doing this scenario step by steps and what are we need to do this.
Thanks
Deepak Jaiswal

Hi Abhishek,
                    Thanks for your suggestion and based on that I have configured following steps in BPM:
Start-    Receive(1)---Transformation(2)-send(3)-switch(4)--
stop
................................................................................. [-Transformation(5)-Send(6)-
.......................[---Branch 1 for error codeFork--[
.......................[..........................................................[-Transformation (7)-send(8)-
Switch(4)----[
.......................[----Branch 2 otherwise branch-Transformation (9)-send(10)-
Here,
Recieve(1) -- is used for recieve request from SRM.Mode is asynchronous
Transforamtion(2)-- is used for operation mapping between request of SRM to HTTP request.
send(3) --is used to sending request synchronous to HTTP,mode is synchronous,used synchronous abstract interface,abstract reqhttp and abstract resphttp
switch(4)-switch Branch1 is used for checking error response to be true---in this branch i use a fork step with two branches
Transformation(5)--- is used to map HTTP response to Mail response structure
Send(6)----
is used to send mail content to Mail adapter
Transformation(7) & Transformation(9)---- is used to map HTTP response to Proxy response
send(8) and Send(10) --- used to send mapped proxy response to SRM as to update user status by calling calling Function module using proxy code.
Is my above approch is correct?
I have defined my container elements without checking multiline option.Is in my case do we need multiline option. checked ?
How to debug my BPM scenario from end to end?
Again, the same question i have not use async- sync bridge here.Does my scenario works fine without this as i am getting hints from my seniours that in this scenario i need async sync bridge concept.If so how to configure and at which steps.
Thanks
Deepak
Edited by: deepak jaiswal on Mar 24, 2010 10:31 AM

Sender Mail Adapter, technical Acknowledgement

Hi all,
I have a SMTP --> XI --> Proxy Scenario. For the inbound message I get via SMTP, I'd like to send a technical acknowledgement back to the Sender (via SMTP, too). The acknowledgement has a specific message structure, for example it contains the DocumentID of the inbound message I get via SMTP.
My idea now is: Within ReceiverDetermination, I configure two receivers:
1. Backend system for the Inbound Proxy
2. original Sender System
Within Interface Determination, I'll do 2 mappings:
1. Mapping from source message to ABAP proxy interface
2. Mapping from source message to technical acknowledgement structure
Then, receiver agreements / receiver communication channels for both interfaces.
My question now is: is there a more elegant solution then doing the scenario like described above? Maybe something I can do in the Sender Mail Adapter to create the specific technical acknowledgement and sent it back to the sending application?
Best regards
Holger

Hi Holger !
XI supported acks are not available for your scenariom because the smtp/mail sender cannot request it.
http://help.sap.com/saphelp_nw04s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/frameset.htm
You should create some kind of artificial ack, that should be part of your own protocol. What I meant with the SYNC proxy, is to use its response message as your own defined ack, because it is not supported as is.
If you call your proxy async, then you will not receive any feedback to use it as ack info.
Another idea could be to forget the ack per se, and just use define an alert in case of problems with the scenario to send a mail to the specified users.
Regards,
Matias

Sender Mail Adapter - CC Error

Hi,
My scenario is Mail>XI>Proxy(R/3).
The sender mail adapter checks the e-mail box and procces into XI.
I'm getting the following error in the CC:
"exception caught during processing mail message, java.lang.ArrayIndexOutOfBoundsException 0 > = 0"
But, this error is only present when the client try to sent the e-mail data, If i resend the same e-mail manually it works perfectly ( Which led me to think that the CC configuration is correct ).
I'm not ruling out any outlook issue.
Do you guys have experiencied this kind of issue?
Thanks.

Thanks Satish,
I'm sending the same e-mail. (manually works, automatically don´t work)
Also, I can´t see the result of the payload because the error is in CC and only shows that error.
Configuration CC:
Transport Protocol: POP3
Message Protocol: XIPAYLOAD
URL, User,Pass...
Encoding : base64
Quality of service: Exactly Once
- Any suggestions?

How to Send Appointment via mail adapter

Hi Guys,
     I need to send the appointment and vTodo via mail adapter, any way i need to develop a mail adapter module. Till now i have finished this part,and i can send normal mail even normal mail with attachment. But i don't know how to send appointment via mail adapter.
This is payload content of appointment which got from Exchange server to gmail:
_=_NextPart_001_01C71EC0.97A011C6
Content-Type: text/plain;
    charset="GB2312"
Content-Transfer-Encoding: quoted-printable
When: 2007=C4=EA6=D4=C227=C8=D5=D0=C7=C6=DA=C8=FD 3:30 =CF=C2=CE=E7-4:00 = =CF=C2=CE=E7 (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi.
Where: China
~*~*~**
This is calendar content
_=_NextPart_001_01C71EC0.97A011C6
Content-class: urn:content-classes:calendarmessage
Content-Type: text/calendar;
    method=REQUEST;
    name="meeting.ics"
Content-Transfer-Encoding: 8bit
BEGIN:VCALENDAR
METHOD:REQUEST
PRODID:Microsoft CDO for Microsoft Exchange
VERSION:2.0
BEGIN:VTIMEZONE
TZID:(GMT+01.00) Sarajevo/Warsaw/Zagreb
X-MICROSOFT-CDO-TZID:21
BEGIN:STANDARD
DTSTART:20070112T140000
TZOFFSETFROM:+0100
TZOFFSETTO:+0100
END:STANDARD
BEGIN:DAYLIGHT
DTSTART:20070112T140000
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
DTSTAMP:20061213T141132Z
DTSTART;TZID="(GMT+01.00) Sarajevo/Warsaw/Zagreb":20070112T140000
SUMMARY:This is calendar test
UID:040000008200E00074C5B7101A82E0080000000030D51864C81EC701000000000000000
010000000CA9F127EA8947844BC4DD47F269BDEA9
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="Xu, Rocky":MAILTO:rocky@***.com
ORGANIZER;CN="Xu":MAILTO:rocky@**.com;roc*@gmail.com
LOCATION:Shanghai
DTEND;TZID="(GMT+01.00) Sarajevo/Warsaw/Zagreb":20070112T160000
DESCRIPTION:This is calendar content\N
SEQUENCE:0
PRIORITY:5
CLASS:
CREATED:20061213T141132Z
LAST-MODIFIED:20061213T141133Z
STATUS:CONFIRMED
TRANSP:OPAQUE
X-MICROSOFT-CDO-BUSYSTATUS:BUSY
X-MICROSOFT-CDO-INSTTYPE:0
X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY
X-MICROSOFT-CDO-ALLDAYEVENT:FALSE
X-MICROSOFT-CDO-IMPORTANCE:1
X-MICROSOFT-CDO-OWNERAPPTID:367904726
X-MICROSOFT-CDO-APPT-SEQUENCE:0
X-MICROSOFT-CDO-ATTENDEE-CRITICAL-CHANGE:20061213T141132Z
X-MICROSOFT-CDO-OWNER-CRITICAL-CHANGE:20061213T141132Z
END:VEVENT
END:VCALENDAR
_=_NextPart_001_01C71EC0.97A011C6--
My question is
1. How to generate this kind of payload in mail adapter module?
2. It is possible to send appointment via mail adapter?
Following i can get from other system, even using mail package check or not using mail package check.
BEGIN:VCALENDAR
METHOD:REQUEST
PRODID:Microsoft CDO for Microsoft Exchange
VERSION:2.0
BEGIN:VTIMEZONE
TZID:(GMT+08.00) Kuala Lumpur/Singapore
X-MICROSOFT-CDO-TZID:21
BEGIN:STANDARD
DTSTART:16010101T000000
TZOFFSETFROM:+0800
TZOFFSETTO:+0800
END:STANDARD
BEGIN:DAYLIGHT
DTSTART:16010101T000000
TZOFFSETFROM:+0800
TZOFFSETTO:+0800
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
DTSTAMP:20070608T025852Z
DTSTART;TZID="(GMT+08.00) Kuala Lumpur/Singapore":20070608T110000
SUMMARY:This is meeting request with attachment
UID:040000008200E00074C5B7101A82E0080000000000A9BD0BA7A9C701000000000000000
010000000C5E16D144D1612498C0EF7E2115EFEC4
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="Xu, Rocky
":MAILTO:roc*@**
ORGANIZER;CN="Xu,y":MAILTO:roc*@**
LOCATION:India labs
DTEND;TZID="(GMT+08.00) Kuala Lumpur/Singapore":20070608T113000
DESCRIPTION:This is content! <<shanghai.txt>> \N
SEQUENCE:0
PRIORITY:5
CLASS:
CREATED:20070608T025925Z
LAST-MODIFIED:20070618T033505Z
STATUS:CONFIRMED
TRANSP:OPAQUE
X-MICROSOFT-CDO-BUSYSTATUS:BUSY
X-MICROSOFT-CDO-INSTTYPE:0
X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY
X-MICROSOFT-CDO-ALLDAYEVENT:FALSE
X-MICROSOFT-CDO-IMPORTANCE:1
ATTACH:CID:008501c7b159$a9d41d3b$_CDOEX
X-MICROSOFT-CDO-OWNERAPPTID:1468557271
X-MICROSOFT-CDO-APPT-SEQUENCE:0
X-MICROSOFT-CDO-ATTENDEE-CRITICAL-CHANGE:20070608T025852Z
X-MICROSOFT-CDO-OWNER-CRITICAL-CHANGE:20070608T025852Z
END:VEVENT
END:VCALENDAR
Thanks & regards
Rocky

Hi
have a look at this
You can use Java/ABAP proxies to do this job for you..
Java Proxy >> will read the mail(with the attachments) with the help of Java APIs and send the message into XI ABAP Proxy >> for this you will have to first convert the attachment into a message and then you can proceed in the regular fashion.
Not all adapters can process attachments, I'm not sure why you are having trouble with using module processor in the mail adapter. Just check if the service pack that you are using supports this feature.
If you are on WAS 6.10 and above you can achieve this and there is an excellent weblog by Thomas Jung on this topic at
/people/thomas.jung3/blog/2004/09/09/receiving-e-mail-and-processing-it-with-abap--version-610-and-higher
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816
reading Pdf Through mail easly done with Java Proxy, which will read the mail(with the attachments) with Java APIs and send the message into XI and then map with the Target ABAP proxy structure .
Thanks

Receiver mail adapter - Payload as a Text attachment

Hi,
In my proxy to mail adapter scenario, when i want to send payload to email as a Text email, where i need to content conversion in XI (XML to Txt file)
when i send payload, currently i am receiving as a XML file.
I try to follow like Rushikesh Deshmukh XI thread: Text Attachment in Mail Adapter in XI forum(topic)
I have having following config
Processing Sequence
localejbs/CreateAttachment Local Enterprise Bean XML2Plain
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType StructXML2Plain
XML2Plain xml.recordsetStructure Header1000,Header2000
Please suggest some solution."
Could you tell me exactly where i need to do all these setting and
do i need import localejbs/CreateAttachment Local Enterprise Bean XML2Plain...I mean shall i add same in my processing sequence
give in detail ? (in Receiver mail adapter Communication channel, advanced mode additional parameters)
I tried to follow this also
http://help.sap.com/saphelp_nw04/helpdata/EN/4e/c153426da9bd30e10000000a155106/frameset.htm
but i could not find much info on this help.sap.com reg. req.
Thanks
Prabaharan

Hi
f i create like this Receiver CC (module Tab)
number: 1
Module Name: localejbs/CreateAttachment
Module Type: Local Enterprise Bean
Module Key: mail
is it enough? do i need any other setting like this
Did you deployed CreateAttachment on PI server. As this is not a standard SAP module this is a custom module?
mail as module key is already used by XIMAILAdapterBean use some other key for CreateAttachment
Settings are fine for the Module
Processing Sequence
localejbs/CreateAttachment Local Enterprise Bean XML2Plain
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
In this:
Module Key: XML2Plain
Parameter Name: Transform.Class
Parameter Value: com.sap.aii.messaging.adapter.Conversion
is it right?
Processing sequence is fine
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType StructXML2Plain
XML2Plain xml.recordsetStructure Header1000,Header2000
can i anyone explain how to these settings?
Is this key valid to provide inputs to the module check with the code for this module
This looks like valid for MessageTransformBean ro StrictXMLtoPlainBean
Thanks
Gaurav
Edited by: Gaurav Bhargava on Oct 15, 2008 5:34 AM

Column header in receiver mail adapter

Hi experts,
I have a proxy to mail scenario in which I send a mail with a file attached.
Is it possible to put column headers in the attachment, possibly without changing the mapping?
I mean, working with module configuration in communication channel?
Thanks
Fabio Boni

hi
There are several scenario's
have a look at following :
/people/sap.user72/blog/2005/05/02/useful-sap-notes-for-xi
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
/people/sravya.talanki2/blog/2006/01/12/xi-triggering-e-mails-with-multiple-attachments--problems
/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
and for further
you can follow
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
i hope this will help you.
Pls : Reward points if helpful
Vishal

Regarding Receiver Mail adapter.

Hi experts,
iam looking at one off the weblog whick Michal Krawczyk have created.
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
in this weblog michal have told to download the XSD file from service market place and upload it in IR External definition it gives us target structure.What is the use off it, we can directly create the target structure.
And also one more dought what is the use off checking parameter in mail Attributes use mail package.I dont have much knowledge on mail adapter please help me in this issue.
i want to send parameters dynamically into receiver mail adapter in my project ie(TO,FROM,SUB and CONTENT) please send links and doc's on it.
Note: Helpfull answer will be rewarded.
Thanks & regards,
Phani

Hi raj,
Once again thanks for the reply,I will explain my object,its is any 2 senarios in one object.
1) file to proxy were i upload employee details in to infotype2010 after inserting what ever error records i will l store them in error table.
2)ater geting error records if i get more then 25 i have to send file path and error records to receiver side. or if i get all sucess also i have 2 send sucess flag into receiver side.
but i haveto pick data from different systems and i have to send the data into different mail ids i have to generate TO FROM CONTENT dynamically.
onsite have prepared TS(Tecnical specs) in that spec they gave XIALL and SMTP.
so my question is using this parameters can i post them dynamically or not.
if YES ? then how??
please help me in this issue.
if u still dont understand give me ur id i will send my TS.
Thanks and regards,
phani

How to retrieve client certificate information from sender mail adapter

Hi, expert:
I have a requirement to verify the validation of coming email with digital certification. The mail is with digital certification. If the coming email is valid, I 'll get the attachemt of the mail for further processing. I have a sender mail adapter and receiver file adapter configued.
I have already my own developed adapter module, which is configued in mail adapter. My question is how to retrieve the detailed certificate information in the adapter module developed by myself. Is it feasible?
Thanks a lot.

The WL-Client-Proxy cert should be the cert used on the proxy side if SSL is configured between Apache and WebLogic, so I believe that is the reason why that does not work. Basically, the problem here is that SSL is end-to-end, and the two ends of this transaction are the client and apache.
That said, when you add the +ExportCertData option, this should record the client's SSL certificate in the vairable SSL_CLIENT_CERT. So you should be able to use request.getAttribute("SSL_CLIENT_CERT").
See:
http://www.modssl.org/docs/2.8/ssl_reference.html
If this doesn't work for you (which is possible if the WL_Proxy is doing something funny to the request), it is probably best just to dump out the entire contents of the session, and see what you have:
for (Enumeration e = request.getAttributeNames() ; e.hasMoreElements() ; ) {
String attr = (String)e.nextElement();
System.out.println("ATTR = " + attr);
System.out.println("VAL = " + request.getAttribute(attr));
If you can't see any SSL certificate there, you will have to work out some way to pass this on manually.
cheers,
Trevor

Text Attachment in Mail Adapter

Hi, I have Proxy-XI-Mail scenario.
I want to send the mail as TEXT attachment.But the Text is coming as Mail content.
I have having following config
Processing Sequence
localejbs/CreateAttachment                           Local Enterprise Bean     XML2Plain
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration
XML2Plain     Transform.Class     com.sap.aii.messaging.adapter.Conversion
XML2Plain     Transform.ContentType     text/plain;charset=utf-8
XML2Plain     xml.Header1000.fieldFixedLengths     100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
XML2Plain     xml.Header2000.fieldFixedLengths     100,30,40,240
XML2Plain     xml.addHeaderLine     0
XML2Plain     xml.conversionType     StructXML2Plain
XML2Plain     xml.recordsetStructure     Header1000,Header2000
Please suggest some solution.
Thanks.
Rushikesh

Hi,
Refer these blogs
http://www.sapag.co.in/SAP-XI-Mail-Adaptor-FAQ'S.html
The specified item was not found.
The specified item was not found.
eMail Report as Attachment (Excel/Word)
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
and also refer these links
http://www.riyaz.net/blog/index.php/2008/02/27/xipi-configuring-the-sender-mail-adapter/
http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm
Regards,
Suryanarayana

Proxy (XI) Adapater vs Mail adapter

Similar Messages

Maybe you are looking for