Prperty editor not coming for roles in dev server

Hi all,
Actually in my development server ,when iam clicking on any of the roles the property editor on the right panel is not coming ,whereas for iviews this problem is not there ,please help me with this isssue and guide me with the necessary steps which need to be done.

HI Prem,
THnks for ur help but its like i have checked the "Activate Accessibility Feature" its unchecked and moreover whenever I try opening portal objects it gives portal runtime error.
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.pcmEditor
Component Name : com.sap.portal.appdesigner.framework.defaultPcmEditor
getDeltalinkState() returns as value IPcmDeltaLinkState.DlState.PLAIN_CONTEXT or IPcmDeltaLinkState.DlState.ADDED_CONTEXT.
Exception id: 03:09_07/03/08_0018_2747750
See the details for the exception ID in the log file.
after that i checked in the log files:
Caused by: java.lang.IllegalStateException: getDeltalinkState() returns as value IPcmDeltaLinkState.DlState.PLAIN_CONTEXT or IPcmDeltaLinkState.DlState.ADDED_CONTEXT
Thanks& Regards
Pooja
Edited by: Pooja Gehani on Mar 7, 2008 1:03 PM

Similar Messages

WDA layout editor not coming

Hi guys and gals,
I am down with a problem here...the View editor is not coming for the WDA objects.I doing WDA developments for the first time. We are accessing SAP through citrix. Is there any solution?

Hi Sourav,
Need to configure in the drivers for your system check with the basis-team.
http://help.sap.com/SAPHELP_NW04S/helpdata/en/67/be9442572e1231e10000000a1550b0/content.htm
Regards,
Sravanthi

Node id does not exist for the current application server id on forms

Hi,
We have a Two node RAC setup on which Oracle e-business suite R12.0.6 is setup
We have CP and DB on two RAC nodes and Forms and Web on two separate server(non-RAC)
while opening oracle forms we are getting" Node id does not exist for the current application server id "
on checking Concurrent manager logfile we founf no error, we matched Application Server id from DBC file of all the 4 nodes with application table
Fnd_nodes... which matches ( there is no mismatch of application server id) .
We have also tried commenting the application server id in dbc file and executed adgendbc.sh to regenarate dbc file but we are facing the same issue.
Also tried to clear setup with fnd_conc_clone.clean setup and again executing autoconfig on db and application tier but no result yet.
Can some one guide as to which file has this message "Node id does not exist for the current application server id "
and what could be the reason for this.
Help is appreciated.
Regards,
Milan

I already tried the mentioned metalink note id but it did not work.What did you try exactly?
Can u help out as from where am i getting the message "Node id does not exist for the current application server id" It is already mentioned in the doc referenced above -- From the dbc file under $FND_SECURE directory.
i mean from which file does the above message comes.Please clean FND_NODES table as per (How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]), run AutoConfig on the database tier then on the application tier and check then.
Thanks,
Hussein

Node id does not exist for the current application server id

Hi gurus,
when i start application services (adstrtal.sh) i encounter the following error: Node id does not exist for the current application server id.
i executed the command select server_id from fnd_nodes and had the following output
SERVER_ID
991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
i also checked the .dbc files under $FND_TOP/secure, there were two HOSTNAME_SID.dbc files (IPPDDVP_VIS.dbc and ippddvp_vis.dbc) with different APPL_SERVER_ID
ippddvp_vis.dbc == 9827D18C8C2E8816E043C0A86452881611641850934523625093287478849136
IPPDDVP_VIS.dbc == 991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
Please help me out.
thanks.

i cleaned the FND_NODES TABLE as per metalink note 260887.1. i run autoconfig on db/apps tier. Now when i start the application, i encounter the following error:
applmgr >./adstrtal.sh apps/apps
You are running adstrtal.sh version 115.19
Executing service control script:
/dvp2/product/viscomn/admin/scripts/VIS_ippddvp/adapcctl.sh start
script returned:
adapcctl.sh version 115.55
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener is not running.
Starting Apache Web Server Listener (dedicated HTTP) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener (PLSQL) is not running.
Starting Apache Web Server Listener (dedicated PLSQL) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
adapcctl.sh: exiting with status 0
.end std out.
.end err out.
please what should i do next to resolve this problem.
thanks

ODI 11g 11.1.1.7 with Win64 bit OS : Starange problem : Right click does not work for Create new data server in Topology.

ODI 11g 11.1.1.7 with Win64 bit OS : Strange problem : Right click does not work for Create new data server in Topology.
On right click nothing happens at all. I have reinstall the ODI multiple times with right installer. issue persist.
Please help.

Hi,
Did you use the generic installer or the win32 one ? You should use the former with Win64.
You can also check that your version of Java is supported in the certification matrix.
Regards,
JeromeFr

ESI not coming for some employees

Hi,
For some Employees ESIC is not Deducting, though i have maintained Infotype 0588, but for some employees its coming...and in RT table Employer ESIC Contribution is coming, but in payslip Employees ESIC is not coming...please help me in this issue...
Thanks & Regards
Ragini NIkam
SAP-HR Consultant

Hi,
Please confirm the followings:
a) Are you able to see /3E1 & /3E1 for those cases in RT?
Ans: In RT Table only i am able to see /3er and not /3e1
b) Value of /112
Ans: /112 is coming Rs. 7988.50 thats my gross amount
c) Validity of IT0588 (ESI)Please confirm the followings:
Ans: Validity is 01.04.2011 to 31.12.9999,
But sir how its coming for some employees and and for some its not.
Thanks & Regards
RAGINI Nikam
SAP-HR Consultant

/ZF5 and TDS Exemption is not coming for custom PF contribution

Hi Friends,
Need help regarding the custom PF deduction, requirement is
IF GROSS - HRA < 6500 then *12%
IF GROSS - HRA > 6500 then Only BASIC * 12%
for this i written pcr and places in the schema also and in payslip PF amount's are coming correctly.
Now my problem is PF Tax exemption i.e., Agg. of Chapter VI is not taking and if retro (any arrears) CF PF is not coming.
can any one please tell how to get the Carry forward PF while in retro and PF exemption for TDS.
please tell PCR and in which Schema i has to add.
My Problem is CF PF is not coming and Exemption u/s 10 also not coming
Screen shots for what i have done:
PCR:
SCHEMA:
INN1 - Gross to Net Calculation
INAL - Monthly factoring and storage (cumul.of gross amount)
Thanks and Best Regards,
Praneeth kumar

Hi Friends,
My requirement is for only one PSA - TANA, PF Basis amount has to check the wage types Basic (2100) and Additional Allowances (3800).
logic is if Basic + Addl. Allowance is less than 6500, the 12% on Basic + Addl. Allownace
if Basic + Addl. Allowance is greater than 6500, the 12% on Basic wage type only.
I changed my PCR and while running the payroll, it is calculating the PF 12% and again 12% and storing in the wage types /3f1,/3f3......
problem is, pcr is checking the /111 EPF Basis and according to logic it is multiplying 12% on that amount. but i want the result like check the EPF Basis and do according to logic and store the values.
system behaving :
Basic - 7727
Allow - 1289
total = 9016
calculation: 7727*12% = 928
system is calculating = 928*12% = 111
PCR:
Payslip:
Best Regards,
Praneeth kumar

Problem in report of cats_da data is not coming for one absence type.

Dear experts,
For one absence type the data is not coming in the report cats_da. When I check the other absence type the report is showing the data. I dont know where is the problem. Customer is entering data throught PA30 transaction. Kindly help me where is the problem in customization.

No answers so closed.

Schedule lines are not coming for HALB after MRP run

Dear All,
I am not getting schedule line after mrp run, inspite of all required setting only purchase requisitions are coming.
Material type is HALB and involve a subcontracting process (30). For raw material I am getting the schedule line but in the case of HALB, it is not coming.
Pls let me know if I am missing something and guide me further on this.
Thanks & Regards
Kundan Kumar

Hi,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.

Order as Direct material check is not coming for shoppingcart with material

Hi,
We are using portal indpendent navigation screen (NWBC) SRM 7.0 extended classic scenario. Order as direct material check box is not coming in item data of shopping cart for shopping against the material. I checked every thing but not able to get the check box for order as direct material.
Please advise what to do.
(N. Kiran Kumar)

Hi,
Please check that the component configuration has not hidden the field, it is under the following configuration:
General Information About the Application and Component
Application: /SAPSRM/WDA_L_FPM_GAF
Web Dynpro Component: /SAPSRM/WDC_DODC_SC_I_BD
Window Information: IV_L_FPC_CA_DETAILS
View Information: V_DODC_SC_I_BD
Configuration ID: /SAPSRM/WDCC_FPM_DODC_SC_I_BD_WI
Component Element you are looking for is ORDER_DIRECT_MAT_LABEL
Also check if someone has hidden the field using WD customizing onscreen, right click over the screen and choose 'User Settings', here check if any fields are hidden.
Regards,
Jason

POP UP is not coming for Partner selection in WEB UI (Service Request)

Hi,
I am working on Service Request right now. I have entered the customer number which has multiple bill to party's. But, on entering the customer number, the system is not displaying popup for Bill To Party. It is filling the first partner as default.
I have checked the partner determination which is used for sales order as well. However, for sales order the popup is coming.
I am not able to understand why the same config is working for sales order, and not working for Service Request.
Could you please help, where I need to check, and how I need to resolve this.
Thanks,
Sandeep

Hi,
in the partner determination procedure check for bill-to-party if the field "Select. limit" is set to 0.
Defines how many partners must be found, for this partner function, for
a selection list to be displayed in the transaction during partner
determination
If this is set you should create an OSS message.
Kind regards
Manfred

OPEN SAVE option not coming for attachments

Hi Experts,
we are showing the different types of attachments for Purchase order and Purchase requisition in our web dynpro abap application.
when the user opens a PO and clicks on attachment button using my custom designed web dynpro application
it shows a popup window with the list of attachments there for that particular PO.
if we click on the attachment link (file download UI element) ... it should open a window(like popup) and give the option for save and open which is not happening for .msg(email message) and pdf file formats.
but by defalut we are getting the save open option for excel, ppt, and other file type attachments and the same not happedning for .msg and pdf types.
please suggest.
Thanks in advance
Sateesh J

Hi Sateesh,
Please make sure the behaviour property of FileDownload UI should be set as 'allowsave' to enable the functionality which you need.
If you are facing the issue even after setting it as "allowsave" then please elaborate more.
Thanks,
Vishesh

After upgrade from 4.6c to ECC6.0 F4 Help is not coming for few date fields

Hi Friends
Just now we have completed upgrade project from 4.6c to ECC6.0.
After upgrade F4 help is not working for some date fields.
For example its working in MB11,Its not working in va01,vf01 like that.
In abap side we checked ...not able to find any issues in coding level, because its a standard SAP code.
So if any solution is there to correct this issue.Kindly help me to resolve this asap.
Thanks
Gowrishankar
Edited by: gowrishankar p on Nov 17, 2009 7:25 AM

Hi
Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable. Hope this will resolve your issue.
Regards,
JB

Business area Not coming for CST /VAT account

Hi,
I am using Business area wise financial statements.System fetches business area for gl accounts except CST /VAT accounts as per the configuration.
Can this be solved through by running the program SAPF180?
i do not know how to do this .
GURU

Before using substitution, refer Note 199886. Think about all possibilities and then you decide.
BSEG-GSBER field for call point 9 (Line item) is not available for substitution. However substitution is possible but tricky.
Good luck.
PP

Migrating from eVC++4.0 to VS2008: Menu Bar not coming for class inherited from CProterty sheet

We are migrating code developed in eVC++4.0 to Visual Studio 2008. We are facing a Problem as descripted below. We are using Pocket PC 2003 emulator.
We are creating a class inherited from CPropertySheet. As below:
In Header File:
class COptionsSheet :
public CPropertySheet
      DECLARE_DYNAMIC(COptionsSheet)
#if(WINVER == 0x400)// This works for MenuBAr inherited from CDialog classes.
      CCommandBar m_cb;
#else
      CCeCommandBar m_cb;
#endif
public:
virtual BOOL OnInitDialog();
We are drawing menu bar on the property window as below:
In .CPP file:
IMPLEMENT_DYNAMIC(COrderSheet, CPropertySheet)
BEGIN_MESSAGE_MAP(COrderSheet, CPropertySheet)
ON_COMMAND(ID_CUSTOMER_COLLECTPAYMENT, OnCustomerCollectpayment)
ON_WM_INITMENUPOPUP()
ON_NOTIFY(GN_CONTEXTMENU, 0, OnContextMenu)
END_MESSAGE_MAP()
BOOL COrderSheet::OnInitDialog()
BOOL bResult = CPropertySheet::OnInitDialog();
m_cb.Create(this);//This we have changed for VS 2008 as menu was not appearing for class inherited from CDialog class as well. In eVC++
4.0 code we have used. Please see m_cb in header file discription
m_cb.InsertMenuBar(IDR_ORDER1);// This calis unable to draw mwnu bar
CMenu *pMenu = CWnd::GetMenu();
//pMenu becomes NULL in very next line as we are passing it as parameter below.
gPromotion.LoadSalesPromotions(pMenu,
"Sales", SRC_TRACE_START);
We tried this as well but it’s also not working:
CMenu *pMenu = new CMenu;
      BOOL cehckStatus = pMenu->LoadMenu(IDR_ORDER1);
SetMenu(pMenu);
      CRect r; GetWindowRect(&r);
      r.bottom += GetSystemMetrics(SM_CYMENU);
    MoveWindow(r);
Do we have to change or add something more for the menu bar in case of Property Sheet. Is there any change between eVC++ and Visual studio 2008 that we need to incorporate here.

This forum is for POSReady. Please try one of the Windows CE forums:
http://social.msdn.microsoft.com/Forums/en-US/category/windowsembeddedcompact
-Sean
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

Prperty editor not coming for roles in dev server

Similar Messages

Maybe you are looking for