PRs with addition of only line items and Clubbing Service and Normal POs

Hi SAP Gurus
We are in ECC 6.0
in our buisness process The PRs are created by the Project system
they could create only one PR with the Same No and when ever a new PR is created it is adding up to the existing PRs line items where the line item has increased to 800 nos now,
also they are clubbing PRs of service and material PRs we need it to be separate
as service PRs and Mtrl PRs are processed separately by different Dept and cannot use the same PR which is here only One at the same time.
the line items are getting added eventhough the PR is released,
Pls tell me how the Above problem could be Solved.
Thanks and Regards
SATHISH

Thanks a lot Rakesh Pradhan the configuration works,
let me know is there any Links to the Document type of PRs to the Project system so as to create Separate PRs for Services.
is there any Complications by having different PR no for PRs every time. as the system was initially configured in this fashion and now as per the requirement we are bound to change the configuration, to separate SERVICE and Mtrl PRs.
Thanks and regards
Sathish

Similar Messages

Balancing field "Profit Center" in line item 002 not filled and VF02

Dear All,
Below mentioned error we got in VF02 while releasing the billing to Accounting document.
In this case SO has created. Later with out delivery has been created Billing ( VF01) And Later Releasing through VF02 ( For only 1 specific Billing type )
But we have CRM Integration also from CRM 7.0 TO ECC 5.0 ( New GL Is there in ECC 5.0)
Here alternative solution is there i.e In OKKP T code if we deselect Profit center Button Issue will be resolved from SD side ( PC Issue )
Then problem will come to CRM with another message as ( Account-based PCA not active in year 2011 in controlling area 1001 (Notification I KM 029) Message no. CRM_ORDER_MISC 060)
Balancing field "Profit Center" in line item 002 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 002, even after document splitting.
System response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose.
Please help on same.

Hi
If i am selecting that indicator in 0KE5 Problem will be resolved in CRM.
But VF02 Is getting this Balancing field "Profit Center" in line item 002 not filled problem.
With out selecting that indicator please suggest. From Last 5 years we are using this Production System.
0KE5 indicator has not selected from 2005 to 2011 also.
CRM Is is process. we have selected in QA, But problm occurs to VF01 and CRM Process.
Simply if i select 0KE5 CRM problm will resolved.
Later SD Problem will come into the pictute.
Note: In PD1 System we hav not selected for 2011 also.
Pls put more inputs.

PO item with Multiple Goods receipt line items

Hi Experts,
When we create PO for specific vendor with one PO line item then at the time of Good receipt there are multiple GR line items. How to control those multiple GR line items as one GR item.
Appreciated your help
Regards
Krishna

Hi,
If you did GR from PO with underdelivery qty in line items, SAP recognize it as partial delivery.
Basically, in the standard system the underdelivery qty scenario is allowed, but not for overdelivery qty.
If you intended to force the system to allow one line item in PO with only one line item in GR, therefor you could create program checking with development team.
please check the link for your reference.
http://help.sap.com/saphelp_47x200/helpdata/en/a5/63344643a211d189410000e829fbbd/frameset.htm
regards,
rob

Issue with sorting of TO line item while using LM05 / LM07

Hi,
We have found an issue in using LM05 / LM07 trnasactionwhile performing picking activity using the RF transaction.
1. Transfer Order is created for the same Material and Batch Combination with multiple line items. So when we display the TO the materials appear in the sequence of TO line item say 1, 2, 3, 4, 5 etc.
2. When we try to confirm the transfer order using LM05 the system is not picking the line items in the order that the TO was created. It is pickinga a random line item from the order and selecting an item from the lower line items of the TO's.
We have debugged and found that there is no specific sort sequence which is changing the sequence of line items as all the sort eliments have the same values except that there are few empty fields. The statement where the sort sequence is changing is 'SORT TMP_SORT_TAB BY NLTYP SORLP NLENR MATNR CHARG' but my concern is it is not sorting by this sequence specified in the code after execution.
If anyone has seen this kind of an issue and has a solution please let me know.
Thanks in Advance,
Harish

As for std SAP ME59N - make sure there is not rounding value is activated in the Material master as well as info record
If this is not the case than check any custom code is activated for ME59N
becuase generally in many compnay when they use ME59n they don't want the same material from diff PR to create the diff line item in the PO so using the custom logic in the user exist they trick the code
it might be the case for you where you have issue.

PO line item details from BAPI_PO_GETDETAIL1 and append to BAPI_PO_CHANGE

Hi,
The requirement is to get PO line item details from BAPI_PO_GETDETAIL1 and save it in the internal table and append that internal table into the BAPI_PO_CHANGE.
But i am getting dump in this program.
TABLES: ekpo.
DATA: BEGIN OF po_details.
        INCLUDE STRUCTURE BAPIMEPOITEM. "Include the structure of Dictionary Reference.
DATA: END OF po_details.
DATA: BEGIN OF po_details1.
        INCLUDE STRUCTURE BAPIMEPOITEM. "Include the structure of Dictionary Reference.
data: END OF po_details1.
DATA: it_po_details LIKE STANDARD TABLE OF po_details,
wa_po_details like line of it_po_details.
data: it_po_details1 like standard table of po_details,
wa_po_details1 like line of it_po_details1.
PARAMETERS: p_ebeln LIKE ekpo-ebeln DEFAULT '4500000016'.
CALL FUNCTION 'BAPI_PO_GETDETAIL1'
EXPORTING
    PURCHASEORDER = p_ebeln
TABLES
    POITEM        = it_po_details.
loop at it_po_details into po_details.
read table it_po_details into wa_po_details with key PO_item = p_ebeln.
move-corresponding po_details to po_details1.
CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
      PURCHASEORDER = p_ebeln
    TABLES
      POITEM        = it_po_details.
append po_details to it_po_details1.
LOOP AT it_po_details1 INTO wa_po_details1.
    WRITE:/ wa_po_details1-PO_item,
       wa_po_details1-MATERIAL,
       wa_po_details1-SHORT_TEXT,
       wa_po_details1-PLANT.
ENDLOOP.
endloop.

HI,
1st you check for the following following authorization objects are checked:
M_BEST_BSA (document type in PO)
M_BEST_EKG (purchasing group in PO)
M_BEST_EKO (purchasing organization in PO)
M_BEST_WRK (plant in PO)
and to change the PO below is the eg for changing the short text:-
TABLES: ekpo.
DATA: BEGIN OF po_details.
        INCLUDE STRUCTURE bapimepoitem. "Include the structure of Dictionary Reference.
DATA: END OF po_details.
DATA: BEGIN OF po_details1.
        INCLUDE STRUCTURE bapimepoitem. "Include the structure of Dictionary Reference.
DATA: END OF po_details1.
DATA: it_po_details LIKE STANDARD TABLE OF po_details,
wa_po_details LIKE LINE OF it_po_details.
DATA: it_po_details1 LIKE STANDARD TABLE OF po_details,
wa_po_details1 LIKE LINE OF it_po_details1,
poheader LIKE bapimepoheader,
return LIKE STANDARD TABLE OF bapiret2 WITH HEADER LINE,
poitemx LIKE STANDARD TABLE OF bapimepoitemx WITH HEADER LINE.
PARAMETERS: p_ebeln LIKE ekpo-ebeln DEFAULT '5600010646'.
CALL FUNCTION 'BAPI_PO_GETDETAIL1'
EXPORTING
    purchaseorder = p_ebeln
IMPORTING
    poheader      = poheader
TABLES
    poitem        = it_po_details.
LOOP AT it_po_details INTO po_details.
READ TABLE it_po_details INTO wa_po_details INDEX 1.
MOVE-CORRESPONDING po_details TO po_details1.
MOVE: po_details-po_item TO poitemx-po_item,
        'X' TO poitemx-short_text.
APPEND poitemx.
CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
      purchaseorder = p_ebeln
      poheader      = poheader
    TABLES
      return        = return[]
      poitem        = it_po_details[]
      poitemx     =
      poitemx[].
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
APPEND po_details TO it_po_details1.
LOOP AT it_po_details1 INTO wa_po_details1.
    WRITE:/ wa_po_details1-po_item,
    wa_po_details1-material,
    wa_po_details1-short_text,
    wa_po_details1-plant.
ENDLOOP.
ENDLOOP.

Additional fields for line item display for Vendor Accounts

Hi,
The additional fields for line item display have been defined for the vendor accounts. I am able to see the additional fields in SAP 4.7 system but not in ECC 6.0.
Could you help me to know how the same will be displayed in ECC 6.0 system.
Thanks

In SPRO, Vendor Accounts -> Line Items -> Display Line Items -> Define Additional fields for Line item display, the fields for Check number from (PAYR-CHECF) and Tax Jurisdiction (BSEG-TXJCD) have been defined.
When I am executing Vendor Line Item display (FBL1N), I am not able to select these fields for defining a layout. Could you please let me know, how I will get these fields in FBL1N.
Thanks

Line item problem in FBL3n and FS10n

Dear ALL FI expert
In my one G/L account(WIP) I do not see any line item data using FBL3n, FS10n.
But the transaction is made in period jan ~ march/2009.
Can anybody tell me why the problem happend?
Note: Actually I can see last year data and it is okay.
Thanks & B.Rgds
Bishnu
23/04
Edited by: Bishnu Dey on Apr 23, 2009 11:08 AM

Hi Bishnu,
For the said GL, check in FS04, whether the line item mgmt tick was changed?
If changed do the following:
Activation of Line item management
For the same a GL had been created with no tick in 'Line item display'. Documents were posted.
Now the line item Display is to activated in the above GL.
For the same for the following process:
a)Tick the line item display in the GL master and save
b)The GL has to blocked for posting
In FS00, Click on the block button and tick the Block for posting button and save.
c)After the blocking of the GL, go to SE38 and enter RFSEPA01 as the program and press execute
d)Enter the Company code and the GL
e)Press Execute.
Now the line items were generated for the GL. Table BSIS was updated. Unblock the GL for further postings
Deactivation of line item management
Now for deactivating line item in a GL the following process should be followed.
a)Untick the line item display in the GL master and save
b)Block the GL for postings (as shown in 1.2.1)
c)Go to SE38 and enter RFSEPA04 as the program and press execute
d)Enter the Company code and the GL
e)Execute
After the execution of the program all the line items of that particular GL will be deleted from BSIS table. Unblock the GL for further postings
Regards,
Kiran

Define Additional Fields for Line Item Display

Dear gurus,
I'd like to ask for your help again, please. I've just added the field BKPF-USNAM to the list of fields of FBL1N using IMG:" Financial Accounting-> Accounts Receivable and Accounts Payable->Vendor Accounts->Line Items-> Display Line Items->Define Additional Fields for Line Item Display". When I run the report the field is correctly displayed but if I save the current layout and set it into the selection screen, the column appears is blank. And if I open the change layout window and click OK the column gets filled.
Is there another transaction that I must set new columns to FBL1N.
Thank you very much.
Paresh Jivani
Edited by: Jivani Paresh on Jul 31, 2009 9:16 AM

Hii,
When you will execute FBL1N, it will come up in standard format. if you want to see any specific fields,then you have to go to Change Layout button and choose from available fields as per your requirement and then execute.
For future reference, you can save this layout as a Variant and then you can directly execute that report using that variant.
Dhara D.

Line items are clubbed in Handling Unit's

There are two line items in delivery for same material , while packing I am selecting single line item and packing it . But when I select line item 10 and try to pack it, line item 20 also automatically getting clubbed with line item 10 and getting packed together .
For this material , rounding profile has been maintained .I canu2019t delete this rounding profile because when we process single line item for this material , system has to round off . Suppose , material is rounded off for 30 units in material master and rounding profile has been assigned for this material.
My requirement is handling unit need to be created for single line item , system should not consider 2nd line item while creating handling unit for first line item even though first and second line items consume same material .
In delivery, suppose , there are two line items for same material . for first line item quantity is 20 and for second line item , it is 23 .
When I try to pack it manually , system should create 2 handling units with quantity of 20 and 23 nos . System should not create handling units with quantity of 30 and 13 .
What configuration change I need to make in handling unit management .
Thanks In Advance
Jaya

Hi Pratyush
I have checked up in both the places, POP2 and POF2, target quantity was mentioned as 1 only for this material .
still ,Why is system not considering only one line item's quantity while packing . why is it clubbing both line items .
Pls help me ........

To make service entry sheet for multiple line items of the service PO.

Hello MM Gurus,
Please help me for the following
I create a service PO with say 10 line items. Then while doing the service entry sheet the system automatically picks the line item 10 by default. When I try to enter the other items it throws an error" unplanned services cannot be entered"
So how to make a service entry sheet which shall include all the line items of the service PO at the same time.
So if I have 100 items in the PO do we make the service entry sheet 100 times against each item? Is there any seeting/solution on this?
Please help.
Regards,
Prasanna.

Dear,
I have two solution for u.
1) Create different service entry sheet -ML81N for each line item and create single invoice verification for all service entry sheet - MIRO
2) Create service purchase order - ME21N for only one line item.
And include all services in service tab available at item detail level of service purchase order. Enter it's quantity and rate.
Than create one service entry sheet for purchase order.
So you can create one service entry sheet for all line item of services.
Note: - Use option 2 for easy process.
Regards,
Mahesh Wagh.

SCs line items are getting splitted into different POs.

Hi Experts,
I am using SRM 5.0 (EBP4.0) ECS.
When operational purchaser is doing carry out sourcing then SC line items are getting splitted into different POs whereas all the criteria are same I mean all the SC line items are having same
1.Purcg.Grp
2.Purch.Org.
3.Company Code
4.Plant/Location
5.Vendor (Preferred)
6.All product Cat.are assigned to one system only.
(In BBP_PD for the SC I dont see any reason for the split)
7.Using Intended for Gouping Option also at the time of Carry out sourcing.
Earlier also I have raised the same question but I didnt get any reply, only some hints and other reference and help bu Yann but I am still facing the same issue and Pls help me if there is any OSS note for it .
Here I'd like to let you know that I have seen same ticket and checked all the possible cause for split but never find any reason for split in this case.Pls help me on this issue urgently.
Brgds
Gopesh

Hi
As Yann told, there might be some standard BADIs for which we need to either modify the standard code in this case.
Has SAP replied on this problem with any comments - on your OSS message yet ?
As far as I know, the following BADIs are some how, involved in the creation of the Local SRM PO. 
BBP_ECS_PO_OUT_BADI 
( ECS: PO Transfer to Logistics Backend )
BBP_EXTLOCALPO_BADI 
( Control Extended Classic Scenario )
BBP_GROUP_LOC_PO 
( Exit Grouping of Items for Local Purchase Orders )
Please send me your detailed requirements at my email id for further analysis.
[email protected]
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Unable to add line item to a Service Ticket!

Hi Expets,
I am facing some difficulty in adding a line item to a service ticket. The service ticket is not getting saved.I think I am missing some parameter to be passed to CRM_ORDER_MAINTIAN.Please find below my coding:
lv_product_i-ref_handle = '0000000002'.
lv_product_i-process_qty_unit = 'EA'.
INSERT lv_product_i INTO TABLE lt_product_i.
ls_orderadm_i-header = lv_header_guid.
ls_orderadm_i-ordered_prod = 'SERVICEITEM_SG5'.
ls_orderadm_i-handle = '0000000002'.
ls_orderadm_i-mode = 'A'.
INSERT ls_orderadm_i INTO TABLE lt_orderadm_i.
ls_input_fields-ref_handle = '0000000001'.
ls_input_fields-objectname = 'ORDERADM_I'.
CLEAR ls_field_names.
ls_field_names-fieldname = 'MODE'.
APPEND ls_field_names TO ls_input_fields-field_names.
ls_field_names-fieldname = 'ORDERED_PROD'.
APPEND ls_field_names TO ls_input_fields-field_names.
INSERT ls_input_fields INTO TABLE lt_input_fields.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
    EXPORTING
      it_product_i      = lt_product_i
    CHANGING
      ct_orderadm_i     = lt_orderadm_i
      ct_input_fields   = lt_input_fields
    EXCEPTIONS
      error_occurred    = 1
      document_locked   = 2
      no_change_allowed = 3
      no_authority      = 4
      OTHERS            = 5.
I am also calling the save and commit BADI's after this, but somehow its not working for me.
Can anyone please help me out on this or provide some pointers?
Thanks and Regards,
Rohit

Hi,
I have tried everything, still its not working.
First I tried creating a Service Ticket and adding the line item at one go.Then I was getting status error:
System error: An attempt has been made to create a status object
with the object number DE20131333937DF180C5001372F65D25. However,
a status object with this number exists already.
Code sample given below:
CALL FUNCTION 'BAPI_BUSPROCESSND_CREATEMULTI'
    TABLES
      header          = itab_header
      item            = itab_item
      partner         = itab_partner
      status          = itab_status
      text            = itab_text
      return          = itab_return
      service_os      = itab_service
      input_fields    = itab_input_fields
      created_process = itab_created_process.
Then I tried creating a service ticket first and adding item later.Then there was no dump, but item details are not getting saved. Code sample given below:
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
    EXPORTING
      it_product_i      = lt_product_i
    CHANGING
      ct_orderadm_i     = lt_orderadm_i
      ct_input_fields   = lt_input_fields
    EXCEPTIONS
      error_occurred    = 1
      document_locked   = 2
      no_change_allowed = 3
      no_authority      = 4
      OTHERS            = 5.
Can anybody please help me out on this? What is the correct approach?
Thanks and Regards,
Rohit

New line item in the service contract

Hi Gurus,
I have requirement to add the new line item in the service contract. Details are as follows.
as per the requirment, manually we are entering the outbound category via web Ui (service -> service contract).Now I have to develope a badi/method in standard badi exec_methodcall_ppf which will insert a new line item with the same material as of outbout category but with the item category as inboud.
could you please help in how can I maintain the new line time. I know we have to use the crm_order_maintain FM but I'm confused what all parameter we need to pass to maintain this.
can someone please share the code to do that. TIA

Hi Paul,
It seems there is no option in changing the condition records at the billing plan item level.
Please try the following.. see if it helps. To execute the invoices with new condition record values directly, make the settings at the billing item category level goto -- the billing document frame -- under serivces frame -- pricing type select option Carryout new pricing (Option B). This option updates the billing document at the time of invoicing with new price calculation.
please see if this can help you out.
Have a good day!!!
Nandu

I updated iphone 4 4.3.3 to IOS 6 but i lost all menu and SIM service and didn't install backup just asking about language,region and wi-fi ..if i unlock my iphone can i backup all programs from itunes?

i updated iphone 4 4.3.3 to IOS 6 but i lost all menu and SIM service and didn't install backup just asking about language,region and wi-fi ..if i unlock my iphone can i backup all programs from itunes?

I'm going through the exact same problem. I plugged in last night. Updated and when it came down to restoring it gave me the same message. Corrupt or not compatible.

SRM Local Purchase Order with both a standard line item and limit item...

In SRM is it standard that you can create a local purchase order from the sourcing cockpit that contains a mix of limit items and standard items?
I know this can be done in R/3.

Paul,
I am a functional/business person, and we are running SRM550 in extended classic, linking to ERP backed.
From our business point of view it makes little sense to mix a limit item with one or more standard catalog item. SAP standard SRM 550 actually stops our users from doing this.
For those who are not aware of the differences I will elaborate.
A standard item is either from a Free Text entry process with the process being completed by a professional purchaser or a catalog item either internal to SRM, or maybe from an external website.
Limit orders are value based and are mostly used for the payment of Utility bills, or for services. We don't use services at all.
In our business we use limit orders for an Electricity Bill for example.
When the user confirms a limit order the quantity should always be 1 and the user enters the value of the item.
The Invoice entry team then needs to match the Invoice to the GR line. It's at this point that if you have Limit items and standard items mixed our invoice entry team could run into problems.
We are aware that it is not recommended practice for Limit orders to have GR and if you can avoid this step then you should. Unfortunately our operating model insist on everything being confirmed and in the case of limit orders this can cause us invoice blocking issues.
Limit orders are normally set up to run for a full FY so the addition of standard catalog items to a limit order makes little or no business sense.
If a user added two limit items to a shopping cart for the same supplier our system would produce two PO's for the supplier to use.
We actually avoid transmitting Limit order details to our suppliers as this would indicate the maxiumum value they could invoice us for, businesses just don't do that. We just send them the PO number and description of the item. This provides them with a PO Ref number to puton their invoices.
As we are still running SRM 550 maybe someone with SRM 7 knowledge would care to expand on this analysis?
Hope this helps?
Allen
PS We don't use the Sourcing Cockpit, just read your earlier response
Edited by: Allen Brooks on Mar 3, 2010 3:22 PM

PRs with addition of only line items and Clubbing Service and Normal POs

Similar Messages

Maybe you are looking for