PRT screen layout change in Work Order

Hi Experts ,
when we assogn PRT to an Operation in Maintenance order then PRT description by default comes in righ hand corner of the screen . I want to shift that column to near to PRT number .
Can any one please help
Thanks

Hi ,
Thanks for the reply . but I donot want this change for my account only , I want it for all users .
In the change settings screen there is one tab for administration settings where we have given numbering for each field but that is deactiveted .
Can you please tell how to activate that
Kind Regards,
Payal

Similar Messages

How to Change Maintenance Work Order Report in EAM Maintenance Super User

Hi,
We like to change or create new costom report in place of Standrd EAM Maintenance work order details report in Maintenance super User Responsibility.
When we go Maintenance Super User > Work Order > Print work order >Layout , In Template layout we find only one LOV called Maintenance report.
We like to where this this Template LOV storing and Run button code where it's storing
THANKS,
Gana

Hi,
You could temporarly adjust the CUNI definition for TST so that it can be converted to seconds. Adjust the notifications to set a valid unit of measure.
The alternative would be to update the field MAUEH in table QMIH with a valid breakdown unit of measure.
-Paul

Screen layout changes-MIGO

We want to make some changes in screen layout for goods receipt for purchase order as well as outbound delivery using MIGO transaction.
we want to keep material code just beside the material description.
Plz suggest the process flow and transaction code.

http://www.sap-img.com/shop/sap-mm-inventory-management-and-physical-inventory-configurations.htm
check this out may be helpful...

Tracking the component changes - Open work order

Hi
We have been using special work order type, it is an open work orders. Was created for adding the small consumable and do the time writing for small jobs. The users are instructed to use only for consumable material and time writing job. But how ever the user who have acces to change the workorder are adding those material with high value. I want to trach who has ordered this changes is there any standard way to check the order.
If any changes made to the component list it will display the same reservation number which the warehouse will issue the goods, I would like to know each time item added to the component list by different user there ID or the name i should find.
Thanks
Mujeeb

Hi Peter,
Yes we can see the material reserverd against the person who is taking the material from the warehouse.
But the issue is while adding the material in the work order does not show who is the person adding the material to the workorder, it will go to the person who created the workorder to the same reservation.
For my issue is there any standard way or we have to go for development please let me know.
Thanks,
Mujeeb

Screen layout changes for PO

Hi expert
In the document type i have change the screen layout to MBF from copying NBF, but i am not getting   effect of changes which i had made for MBF..
Regard
Nabil

HI,
There are up to six different field selection keys.
Eg: 1. Field selection key: transaction
      2. Field selection key: activity type
      3. Field selection key: purchasing document type
      4. Field selection key: item category/document category
The successive combination of the field selection keys listed above decides which input characteristics the fields have in the document.So not only MBF, it is the combination of the setting that determines the field layout.
+ For mandatory fields
. For optional fields
For display fields
- For suppressed fields
the strongest is suppresed, then display, then mandatory and last is optional.
ie , for eg combine fld sel key 1= suppressed and fld sel key 2 = mandatory, result is field is suppressed. Similarly , ther final result after combining the settings determine the field status.
Regards
Aloysius

Migo Screen Layout Change

Hi Experts,
I want to Hide Amount in LC Field (Screen field- GOITEM-DMBTR, ) in Display of MIGO. How can I do this in spro. Kindly suggest.
Thanks in Advance
Ishu

Dear,
You can use T.code OMJX
And try this links,
[How to change screen layout of MIRO and MIGO transactions ?;
[MIGO layout change;
[MIGO Screen layout for 541 movement;
Regards,
Sandip

Screen layout changeing according to overview icon

Hi all.
I have one question.
When I use 'pa30', I can see a couple of provided icons.
When I choose overview icon among them, Screen is displeyed.
I'd like to change layout of this screen.
How am I doing for that?
Probably, Is it possible by setting 'IMG'?
For example> I choose PA30, and register personnel number.
And I choose infotype '0021' and press a 'overview icon'.
And then, screen is displayed as follows.
Type,Name,No,Last Name,First Name, Registration NO, etc
I'd like to add stuff like begda and endda.
I want to represent screen layout as follows.
begda, endda,Type,Name,No,Last Name,First Name, Registration NO, etc
Edited by: John Kim on Feb 5, 2009 3:28 AM

I solved this problem to your kind assistance.
Thank you.
Edited by: John Kim on Feb 6, 2009 2:16 AM

Change Maintenance Work Order Detail Report in Print WO page

Hello,
I would like to ask you for your help. We would like to have different report in Print WO function than Maintenance Work Order Detail Report. I mean SSM responsibility > Search for WOs > click Print WO icon. We applied patch #9871500 (I found it there: Templates associated to datadefinitions other than 'EAMWRREP' are not shown in the Work Order Detail report in EAM [ID 1209703.1]). I did personalizations steps - I defined new data definition (for example TEST) and report with data definition TEST is shown in the option on Print WO page now... But how should I it define to have correct result? What should be defined in Executable, Concurrent Program, Data Definition and Data Template? I have RDF and RTF files for this report. We are using different SQL than it is used in the original report. How could be used our SQL defined in RDF?
Thanks, Regards,
Jitka

Hi,
1) You can choose to select and Print shop paper when you need.No enhancement is required.
2) There is not an option in standard to say Print/Not print Long text . You will have to replace the standard form with a custom form and build the logic to print /Not Print long text based on your rules.
Regards
Narasimhan

Sub screen: Layout changed after applying the Patches

Hi,
I created a sub screen and used the same in a standard screen. The issue is that when I compare the screens i.e. the layout of the sub screen and where it is actually used(standard screen), they differ.
The sub screen was being displayed properly before the Patches were applied.
Does applying the Patches has anything to do with this? If so, how to resolve this?
Regards
s@k

ennahk wrote:
Thanks Hussein for the quick reply...
Here are the list of patches applied in that order 1) 7427746 2) 8349148 3) 12992649All those patches are related to Assets module and should not have any impact on the concurrent requests in general (from the README files and the MOS docs).
If no other changes have been done recently, then I would suggest you log a SR.
Thanks,
Hussein

Changing the work order concept .

While creating PM Order IW31 , I get responsible work center and profit center populated once I select the main work center .
My question is if I change the Main work center should the responsible work center and profit center change automatically ?In my case it does not change and my client is asking if they can be changed by some settings .
Along with this I have some doubts as where the following comes from and what s their significance.
>Responsible cost center(Additional Data)
>Profit Center(Additional Data)
>Cost Center (location tab )
>Cost Center (in settlement rule )

Responsible cost center(Additional Data)
This is labor cost center which have been defined in Main work center. In KP26, for the combination of this cost center & activity type which has been mentioned in Main work center, cost will be defined. So its important to calculate the Internal labor cost.
Profit Center(Additional Data)
Generally profit centers will be defined to club the costs & profits, so that in controlling, profitability analysis can be done. Each cost center will be assigned to profit center. More cost centers can be assigned to profit centers. For example, by means of production, company will get the revenue. By means of maintenance, they incur some cost. By comparing cost & revenue, analysis for CO can be done easily.
Cost Center (location tab )
This will be picked from Technical object (Equipment / Functional Location) masters. This is settlement receiver where order cost will be settled. So that, by seeing cost center based report, we can find out how much we spent on for maintenance.
Cost Center (in settlement rule )
Generally Cost Center (in settlement rule ) will be Cost Center (location tab ).

Urgent :ALV layout change not working

hi experts,
i copied the tcode FBL5N into ztcode.
added some more fields to the ALV output.
using GUI STATUS 'ALV_ITEMS_AR'
when i select the change layout from using application button, added some more columns. Data is picking correctly, but i dont see the data in that sleceted column.
ideas will be appriciated.
thanks,
shaik bhasha

hi Atish,
thanks to initiate me to check the logic, its actually big program with lot of includes and LDBs. i found that the problem, internal table is not reflecting properly. fixed.
Thanks,
shaik bhasha

PO Screen Layout change, Addition of one column in Item Overview screen!

Hi All,
I have one typical requirement where in user wants to add one column in the Item overview screen, example "Reason for ordering" which is there in Item Detail under Retail Tab!
Can anyone suggest, How can i get this done? and also i want to know if there is any possibility to add this field at header level??
please let me know if i'm not clear in describing the issue...
Suggestion and solutions would be rewarded & appreciated,
Thanks in Advance..
Regards,
Siddaram

hi,
Check sap note 458591..
Regards
Priyanka.P

Layout change in sales order or billing suitable for taking printout in A-4

Address is larger than the space provided in the pre- printed stationary billing slip or sales oreder provided by our client, how to adjust the font, that fits for print out sheet of A- 4 size.kindly tell me how to adjust the size of layout. is there any need for ABAPer, to work on re-sizing of the layout of the slip, which is suitable for taking printout ?
kindly sugggest how to dot this layout adjustements.
regards,
g.v.shivakkumar

this will done by abaper.. goto se 41.. there abaper will write code ...
ramki

Screen layout changes document flow

Hi Experts,
I came across one specific need of customer where as he wants to supress 'service document' tab field on document flow screen,
I am not sure if that is at all possible and will appreciate your views and solution in detail.
Thanks in advance.
Paresh

thanx kishor for your prompt reply,
this problem came from ABAPer to me suggesting tht there is some radio button to be unchecked ...........i am not sure though, but if you can please put some more focus just in case.
Thanx again.
Message was edited by:
Paresh Kolte

Generating deltas records after a work order status change

Hi
We are currently reporting on Work Order status changes in BW. However, the process team has written an ABAP program that allows users to change a Work Order status or an Opeartion status. Any changes using this method do not trigger a delta record to be written to the Outbound Queue MCEX17 and subsequently we do not pick them up in BW without having to to a re-initialise.
Could anyone tell me how we could trigger a delta to be written to the Outbound Queue in the same manner as the standard Work Order change transaction IW32.
Cheers, Mark

Hi
I m not sure about functionality though but you can create delta by using FM...
Search SDN and you will get doc for that..
Regards
Guarav
Assign points if it helps

PRT screen layout change in Work Order

Similar Messages

Maybe you are looking for