PS 5.1 installation progress stops at 36%

I am trying to install the PS 5.1 trial. It successfully downloads, extracts and the installation starts. It always stops at 36% and the "time remaining" just goes on adding minutes. I am on OSX Lion. Any hints/ideas on what to do?

Hi,
Please take a look at this document which provides detailed instructions on troubleshooting installation issues at each stage of the installation process : http://kb2.adobe.com/cps/828/cpsid_82827.html
Try performing the steps under the Installation Progress section to fix the issue.
Hope this helps.
Thanks

Similar Messages

I'm in the process of updating my iPhone4 to IOS. The installation has stopped half way in the process. And it has ben like that for almost two hours. Now what do I do?

I'm in the process of updating my iPhone4 to IOS6. The installation has stopped half way in the process. And it has ben like that for almost two hours. Now what do I do?

Hello scrapperdw,
Thank thank you for using Apple Support Communities.
The following article provides steps and troubleshooting when the install process has stopped.
iOS: Apple logo with progress bar after updating or restoring from backup
Regards,
Jeff D.

After a crash during the installation of Captivate, the installation program does not "initialize" and the installation procedure stops. Any suggestion?

I bought “Captivate” few days ago. I received the internet address to download the program and the activation number. I downloaded the program (OK), started the installation program (OK) and received indications that the decompression process was OK. Then the installation started and I was asked to introduce the activation number (OK). After this, a bar showing the progress of the installation was shown on the screen. The bar stopped at 2%. I waited more than 20 min and saw no progress. Then I decided to start the “windows task manager” to see if the process was active. I have windows 7, so I pressed alt-ctrl-del and received the message (2-5 min later) that the task manager could not start. I waited more time (more than 1 hour) and since the installation progress was still indicating 2% and since I still could not activate the task manager, I rebooted the computer.
I then tried to reinstall the program. After the decompression, I receive the message:”Installer failed to initialize. Please download Adobe support advisor to detect the problem”. I followed the link to discover that the program is no more available.
What should I do?

Hello,
Please follow the steps down below .
Disable the start up items. ( Ms config )
Rename the OOBE folder from the location mentioned below .
Windows: C>Program files or Program files(x86)>Common files>Adobe>OOBE and rename the OOBE folder to like (OOBE_old).
Uninstall the Adobe Captivate 8 components manually from the machine. Delete all the Adobe Captivate files and folders manually.You may check the following locations.
                  o   C:\Program Files\Adobe*
o   C:\Program Files\Common Files\Adobe*
o   C:\Program Files\Common Files\Macrovision Shared
o   C:\Program Files (x86)\Adobe*
o   C:\Program Files (x86)\Common Files\Adobe*
o   C:\Program Files (x86)\Common Files\Macrovision Shared
o   C:\ProgramData\Adobe*
o   C:\ProgramData\FLEXnet
o   C:\Users\<user_name>\AppData\Roaming\Adobe*
o   C:\Users\<user_name>\AppData\Roaming\com.adobe.*
o   C:\Users\<user_name>\AppData\Local\Adobe*
o   C:\Users\<user_name>\AppData\LocalLow\Adobe*
o   C:\Users\<user_name>\AppData\Local\VirtualStore\Program Files\Common Files\Adobe*
Create a new user account which has the admin rights on it.
Restart the machine.
Login to a new user account .
Once you are logged in then try to install it again.
Regards,
Rajeev .

Printer Software Installer has stopped working

Product: HP Laser Jet M1005 MFP
OS: Windows 7, 64-bit
Notebook ACER , Aspire 5349, Intel Celeron CPU B800 @ 1.50 GHz
(new notebook, old printer - printer worked well on Windows XP)
I downloaded driver ljM1005-HB-pnp-x64-en. Driver had been extracted and setup started.
Installation started and after some initialization (~10 sec) it kept writing:
Preinstalling the driver files... or Copying files to hard drive... (switching approx. once per second) after a while (~ 20 sec)
Printer Software Installer has stopped working. Windows tried to find solution but did not find anything.
I TRIED ALREADY EVERYTHING. I used patch for AMD processors (of course, did not work); I have Windows installer up to date; I disabled Internet Explorer 9.0 (I cannot uninstall and iether can I step back to IE 8.0 since notebook is brand new); There is no windows driver preinstalled for this printer and there is no similar driver working.
Driver cannot be installed and printer does not work.
Please, help.

Hello,
Thanks for the post. This is an odd one, I might suggest the method outlined below in the third link, if that does not help, I might recommend that you post this question on the following links below. Good Luck!
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Problem installing SQL Server 2012 SP1: "managed sql server installer has stopped working"

Hello,
I have a big problem.
I just downloaded SQL Server 2012 SP1 and I only want to install SSMS. The installer always crashes with an error message "managed sql server installer has stopped working".
I already tried all solutions from Google for this problem but nothing works.
Can someone help me plase?
My System: Window 8 Pro with Visual Studio 2012.
Thanks
Sven

Would you please uplaod/share SQL Server setup logs
C:\Program
Files\Microsoft
SQL Server\110\Setup
Bootstrap\Log\20130125_133342
to file sharing service like SkyDrive.com
FAQ
Regards,
Ahmed Ibrahim
SQL Server Setup Team
My Blog
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful"
on posts that help you.
This can be beneficial to other community members reading the thread.

Installation progress for apps in app store

How can I see the installation progress after clicking INSTALL for an app in App Store; I find there are some apps that are taking lot of time for installation, hence wanted to check their progress.

Besides taking app size into consideration, the other factor you can control to speed things up is where/how you connect to the Internet. The better the link, the faster the download/install process will conclude. Unless you have extraordinarily good cellular data service, Wi-Fi usually trumps that.
If you move away from the app window in the App Store before it concludes the download, can always go back by going to the Purchased tab. Sort by Most Recent and the one downloading will be in the upper left corner of the list. When the download concludes, the progress circle will change momentarily to the "cloud with downward arrow" icon while your entitlement to the app gets registered in your AppleID records, then will change to an Open button, since the app is located in the iPad's local storage.

I purchased Fifa13 from the App Store, downloaded it in my pc..,but whrn i am trying to install it in my iad frpm the pc, i couldnt do it. The installation process stops after some time and the ipad shows some thing like "can sync..,failed to install fifa

I purchased Fifa13 from the App Store, downloaded it in my pc..,but when i am trying to install it in my ipad frpm the pc, i couldnt do it. The installation process stops after some time and the ipad shows some thing like "can sync..,failed to install fifa13"
What can i do?
btw....,its happeniing only wth the fifa13, installed other apps from pc previously.

anybody answer me fast

What to do? Flash installer progress bar reaches 95% and freezes (at least 40 minutes).

!Flash installer progress bar reaches 95% and freezes (at least 40 minutes). Mac OSX 10.6.8, Firefox 36.0.4, Safari 5.1.10, Flash Player 17.0

Same question, same answer: use the offline installer http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
[topic moved to Flash Player forum]

Windows Connection Manager Profile Installer Has Stopped Working

Hi all, I thank all who can help me with this problem beforehand and will do so after.
I am an IT technician at a university in South Africa. I am trying to install a custom made VPN program that works perfectly on every other machine but not this one laptop.
It is a Lenovo G580 laptop running Windows 7. Every time I try to install the VPN i get the error message that Microsoft Connection Manager Profile Installer has stopped working.
I have made sure all the updates are installed.
I have done disk check.
I have done System File Check.
I have done Windows Repair.
I have coppied the cmstp.exe and ole32.dll files from one windows to the problem computer.
I have taken permission of both the above mentioned files.
I have done anti-virus scans and anti-malware scans.
I have tested that other applications(not VPN's) install correctly.
I have tested that the VPN installed correctly on other computers and pulled a new one to make sure the application was not corrupted.
Error details:
Description:
Stopped working
Problem signature:
Problem Event Name:   APPCRASH
Application Name:   cmstp.exe
Application Version:   7.2.7601.17514
Application Timestamp:   4ce7a860
Fault Module Name:   ole32.dll
Fault Module Version:   6.1.7601.17514
Fault Module Timestamp:   4ce7c92c
Exception Code:   c0000005
Exception Offset:   00000000000284fb
OS Version:   6.1.7601.2.1.0.256.1
Locale ID:   1078

Hi,
Generally speaking, this error can be caused by one or several of the below factors:
a. The dll file is deleted accidentally from your system
b. The dll file is damaged due to virus or spyware infection
c. improper software removal
d. The dll file was overwritten by an incompatible version.
e. Outdated hardware drivers
f. Too many invalid/obsolete registry entries.
g. Related registry entries is corrupted.
I would like to suggest you try the following steps to check the results:
a. Do a system restore to undo recent system changes. If the error is just caused by the file getting corrupted or damaged, performing a system restore would help you to get a fresh copy back and also fix the related error well at the same time.
b. Update the drivers for hardware devices and install any available Windows updates.
c. Test in a new user account. If it works, please refer to Fix a corrupted user profile.
Fix a corrupted user profile:
http://windows.microsoft.com/en-US/windows7/fix-a-corrupted-user-profile
If the individual troubleshooting advice above is unsuccessful, performing a startup repair or repair installation should restore all Windows DLL files to their working versions.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

HT3986 Windows wants to restart several times during initial installation. How do I restart it in windows, so I don't lose my installation progress?

Windows wants to restart several times during initial installation. How do I restart it in windows, so I don't lose my installation progress?

It would normally restart in to Windows but if you need to do it manually you can hold the Alt key as the chime sounds and then pick the Windows hard drive icon.

Managed sql server installer has stopped working sql 2008 r2

I tried to installed sql 2008 r2 on my windows 7 but unfortunately I got message "managed sql server installer has stopped working"
1. I tried to program feature on and off feature
2. I checked setup file is corrupted or not setup file is well in condition
3. I turn on firewall too.
then again I tried to installed again same problem I faced.
please any different way to overcome from this problem!
regard Bishnu Khaling!

Hi Bishnu,
As Shanky’s post, you can post the SQL Server setup log files for analysis.
According to the error message, it is usually a problem with the installation of .NET Framework on the machine. However, from your description, you try to turn on the Microsoft .NET Framework 3.5 feature and still fail to install SQL Server 2008 R2.
Do you reboot your computer after enabling .NET Framework 3.5?
To further troubleshoot this issue, I recommend you perform the following steps.
1. Run the below tool to verify the state of one or more versions of the .NET Framework on the computer .
http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx
2. If .Net Frameworks 3.5 cannot be verified in step1, please use the
.NET Framework Repair Tool to repair it.
3. If there’s no problem with .Net Frameworks 3.5, and you also have .NET Framework 4.0 or 4.5 installed on the computer, please uninstall .NET Framework 4.0 or 4.5 completely. Then reinstall SQL Server and check if it is successful.
4. In addition, please make sure that the Windows 7 system is not damaged.
For more details about the error, you can also review the following blog.
Fix: Managed SQL Server installer has stopped working on Windows 7 | 8:
http://www.thewindowsclub.com/managed-sql-server-installer-has-stopped-working
Thanks,
Lydia Zhang

The installation process stops at 90%

I tried several times to install a trial copy of Photoshop Elements 8.0 without completing the installation. At a certain point, around 80-90%, the installation process stops at and it return back to zero.
Thanks for any help.
Fabio

Hi Fabio,
Can you please attach the log file which can be location at the below location in this thread?
Start -> Run -> %temp% -> PSE8Installer.log
Also, can you please let me know what all other Adobe products are installed on the machine?
Regards,
Ankush

CS4: every thing is good, but just before installation progress...

Hi, I'm facing a very very big problem, CS4 was working very good in it's intallation, but just before installation progress...
A message appeared telling me to insert disk one in drive J...
The story: I'd the original copy as a copy of an ISO file... I mounted an image for this file on the drive j. and ran the setup.exe file, every thing went good, just before this message appeared.......
pleaase please please please help, I need it urgently....

Any way to solve this..??
I realy want it

IOS 8.0.2 installation. Stops after agree to conditions. Then stuck in General Settings and have to turn off my phone.

IOS 8.0.2 installation. Stops after agree to conditions. Then stuck in Settings General and have to turn off my phone to get out.
Help.

Hello bobwa002,
It may help to reset your iPhone.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If you're still unable to proceed, the next step would be to restore the device.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Cheers,
Allen

I'm trying to install xCode, and it asked me to quit itunes. But itunes has quit and the installation has stopped. how do i fix it.

it asked me to quit itunes. But itunes has quit and the installation has stopped at the instalation alert for itunes. how do i fix it.

Okay i just figured out how to fix it. all i did was go to my Activity Monitor and searched all processes for itunes, itunes helper was running. i just quit it and intaller.app was just fine. thanks thou, ill give you the points for trying to help me.

PS 5.1 installation progress stops at 36%

Similar Messages

Maybe you are looking for