PS 5 not showing adj made in LR4

Using LR4.1RC & PS5 ver 12.0.4 Edit in PS w/ LR adj does not work. Some adj, like spot removal are carried over but others like exposure, clarity etc. are not showing up in CS5. Anyone else having this problem or am I the only lucky one.

Render in Lightroom instead of choosing "Open Anyway". If you don't see the warning, you might have to reset your suppressed warnings in Prefs.

Similar Messages

DNG files exported from LR4 not showing changes made when opened in PSE10?

I have LR4, and once I make some develop changes I've been exporting the files I want to use as DNG. I then open them in PSE10 to make final edits. It's been working fine, actually I had an older version of Adobe Raw in my PSE on my other computer. So when I opened in PSE it would ask if I wanted to conver to compatible version to edit in camera raw. I always said no b/c I didn't need to do anymore raw edits. Now that I have installed PSE on my new computer, it has the new ACR version I guess. When I open the DNGs to edit now I no longer get this error message, but it's showing my contrast, etc. as a standard raw setting instead of the changes I made in LR. Some are showing....like vibrance, but "recovery" which I know is "highlights" in LR, and other things are not showing correctly. I know that the options are different, but I don't want to use the ACR settings that it's using when I open the file, or have to go through them again. I'm sure there's something I'm missing but can't figure it out. Thanks for any help!

I quite simply did not comment on the issue of "it is supposed to be better to keep DNG files as opposed to NEF files now, right?"
The issue you raised in your original post, and the issue of choosing DNG versus NEF, are completely separate and independent.
The issue of transferring photos to PSE would cause the exact same problems in your case whether or not you use DNG or NEF.
On the issue of converting photos from NEF to DNG, there are advantages and disadvantages, some people do and some people don't. If you'd like to know more, I suggest you search this forum, there are plenty of discussions on this topic.

Bridge Not Showing Changes made in Camera Raw

Hi I work on an iMac (Mac OS X, version 10.4.11), and am currently trialing CS4. My problem is that I have been processing Canon Raw files in Camera Raw, but when I view the images in the preview pane of Bridge, it is not showing the changes that I have made.
This is just a sudden problem. I have been working like this for ages in CS3, and it was even working properly in this trial version of CS4, but literally all of a sudden in the middle of processing a wedding shoot it stopped showing the changes. So half the images now show the changes but the rest do not, and it no longer shows any of the changes I make in Camera Raw
Does anyone have any answers to why this suddenly changed?
Cheers Da ni

DaniJumbo wrote:
This is just a sudden problem.
"Sudden" is usually a sign to trash your suddenly corrupted preferences. Hold down the option key as you launch Bridge.
You may also need to Purge the Cache for each offending folder through the Tools Menu in Bridge.
Also check your thubmnail options:

Bridge CS5, Ver. 4.0.5.11. : miniatures do not show adjustments made in CameraRAW

Since some time now my Bridge miniatures do not show adjustments and changes I made on my RAW files in Camera RAW. Can someone help?

By minitures you are talking about thumbnails, you most likely have them set to embedded. To show edits to RAW you need one of the HQ options. But beware they take a lot more file space and are slower to build. To change options it is a icon in lower toolbar on right side.

CS6 Bridge (PC) does not show adjustments made in earlier Camera Raw, or even its own Camera Raw! PLEASE HELP.

PLEASE PLEASE PLEASE WILL SOMEONE WHO KNOWS ABOUT THIS CONTACT ME???
CS6 Bridge does not show ANY of the adjustments I've made in previous versions of Camera Raw, and sometimes (intermittently) doesn't show adjustments made in CS6 Camera Raw.
I'm on a PC, I've uninstalled and reinstalled about 6 times. I feel so upset, I've spent literally HOURS going in circles on the Adobe website, trying to get help on the phone (I'll pay!!!) but there seems to be no way to contact anyone. I've posted this problem several times and no one answers.
If you don't know the answer, can you please tell me how to get tech help even if I have to pay for it??

Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type:    GPU
Bus:    PCIe
Slot:    Slot-1
PCIe Lane Width:    x16
VRAM (Total):    512 MB
Chipset Model:    NVIDIA GeForce GT 120
Type:    GPU
Bus:    PCIe
Slot:    Slot-4
PCIe Lane Width:    x4
VRAM (Total):    512 MB

Bex iView does not show changes made in web templates

Hello,
I have a Bex iView that presents a web template which is exposed in two portals.
I made a certain change in the web template in portal A and I can see the change through the Bex iView in this portal.
I than transfered the change to portal B and I can see this change at the Web application designer's code when it is connected to portal B.
The problem is that I can't see the change through the Bex iView in portal B, it keeps presenting the old version of the web template. Also, if I preview it from WAD, which opens it in the portal, it shows the old version as well.
<b>I've already tried/verified the following:</b>
1. It's not a client related issue as it happens to all clients.
2. I have tried clearing both the client and the portal's pcd caches.
3. No cache whatsoever is configured in this iView's properties (Cache Level: None, Cache Validity Period: 0,0,0,-1, Allow Client-Side Caching: No).
4. When I run the iView in debug mode in the application integrator I can't see anything unusual I can think of. Also, I can see there that it points to the correct web template.
5. Retransported the web template from server A to server B.
What else can be done here? Any ideas...?

Hello,
did you resolve your problem ?
Best regards

Bridge Preview Images not showing changes made in ACR

Suddenly my raw (Nef) files in Bridge are not reflecting the changes I make to them. In other words after downloading from my CF card, I work on raw files in ACR either one at a time or sometimes applying changes across several pictures. The changed files show up in Bridge briefly and then revert back to the unchanged looking raw. All changes actually exist because if I open the file in ACR or PS they appear just fine. In Bridge however, no changes including cropping, etc. show up. When I open Bridge the files are fine for a moment and then they revert to the uncorrected raws. I can also go to View and hit "refresh" and they will all show the proper changes for an instant and then revert to the original state again.
I've tried resetting preferences, purging and rebuilding cache, deleting temp files, removing and re-doing xmp files, expanding cache size and all the various rendering options in Prefs. Nothing works.
I cannot use the Bridge Light box or Preview function to compare photos because the corrections I made aren't there to be seen. The only way to see them is to open each file one at a time in ACR. This problem has forced my workflow to a crawl as I have to edit one pic at a time without being able to compare two together. Any help would be appreciated.

Hi All:
I had similar problems plus constant crashes that made Bridge unusable.
It drove me to try alternatives to bridge and to try Lightroom. I like
Lightroom better than bridge but it has an operational limit that leads me
to be reluctant switch. But here is the rub, now Bridge is working
perfectly! What I think fixed Bridge is running a disk/registry cleaner
called Ccleaner multiple times. I ran it almost every day for a week. It
found lots of stuff in my registry that it didnt like but as time went by
it found less and less. It also let me turn on or off services that run at
startup. I shut off anything that I could see that I didnt need, like
Adobe downloader; I dont need automatic downloading, as I can do it
myself. The result is at some point Bridge started to work again. It has
stayed working for more than 2 weeks now without one crash. I dont know
what was fixed that did the trick but so far Im happy. Ccleaner is a
free program and can be found at http://www.ccleaner.com/. Its a live
program as there have been several updates since I started using it. Try
it; I think it worked for me.
John Passaneau
PS
After Bridge started to work again, I had to purge the cache and rebuild
it. I use cache distributed to folders as I keep my photos on a network
attached drive and access them from 2 computers and a local cache will not
work for me.

Calander on my PC not showing appointments made on my phonecalander on my PC not showing appointments made on my phone

I have my Calendar in Firefox on my windows 7 PC. it is not syncing new appointments mad from my Iphone 4s. how do i fix this?

I have searched the web........ I have tried to use the Apple support....... AND THIS IS THE ONLY PLACE where I found the simple answer I needed. THANK YOU Mr. Lockwood!!!!!!!!!!!!! NO............. REALLY ------->
(as you can see, by me replying to myself, that I am not the best at computers.... )

Lightroom not showing edits made in ACR

I edited photos in Adobe Camera Raw from Bridge, but when I look at the same files in Lightroom, they do not appear to include the edits. I did verify that xmp files were created when I edited the files in ACR. Why is Lightroom not reading the xmp file and showing the edits?

I appreciate the detailed response. I have been told by a photography instructor that it makes sense to use both Lightroom and Photoshop together and that Lightroom is for end-to-end workflow (which Photoshop is not capable of). I was not aware that Lightroom is only designed for front-end workflow. Is there any formal documentation on this that I can read to understand the purpose of Lightroom?
The Adobe website has some good introductory videos. I think this is a great place to start:
http://tv.adobe.com/watch/george-jardine-on-lightroom/the-lightroom-catalog/
but the other videos can be found behind the Products and Channels links toward the top of that video's webpage.
The recommendation to use Lightroom with Photoshop, rather than LR on its own, is somewhat akin to recommending Bridge + ACR + PS, except it makes less sense to even think of using Bridge+ ACR on thier own without Photoshop. You can do a lot with LR on its own but not quite everything. On the other hand, those specific tasks which you cannot do in LR may be done using some other editing software than PS, including many cheap and even free alternatives, or using older versions of PS even if they are not ACR-compatible with your camera.
When you use Bridge, the Raw conversion and similar types of parametric editing are assigned to ACR and the rest is passed to Photoshop. Bridge cannot directly print or export without calling on another program or utility to do that. It can only view preview thumbnails and manage metadata and issue instructions to other software. ACR cannot paint, warp, use layers, etc - because it belongs to the same basic class of software, as Lightroom's Develop module capabilities.. in fact there is a very close functional correspondence between these two, and deliberately so; so that the image adjustment parameters involved can be inter-compatible.
When you use Lightroom, the Raw conversion and parametric editing can be very efficiently taken care of internally by LR so ACR does not need to be involved. This works especially well for dynamically applying edits across batches of images on the fly, previewing the effect of processing presets (recipes), making use of a full history of the changes applied to each image, and so on, You can print or export directly without leaving the parametric realm, a little as if you were able to do so from inside ACR.
But when an image editing task is required that is not of this parametric kind (such as compositing, detailed retouching other than a little dustspotting, etc) then just as Bridge can pass an image into PS that will be saved as a new file version, Lightroom can also do the same using its own workflow that does not involve Bridge.
The method is very simple: a new LR image version is created based on a brand new working file saved to disk. Ctrl+E or right-click and select "Edit in... Photoshop". and your image as it currently appears in LR, is automatically opened inside PS. Save when you are finished, and the PS-edited changes appear inside LR transparently. Then you carry on working with that, in the same way as for any other image inside LR,
RP

CS6 Bridge does not show adjustments made in Camera Raw

How can I fix this?

Dear Gene,
I LOVE YOU!!!! THAT DID IT!!! Thank you, thank you, thank you, thank you!!!!
I've spent hours on this issue, had to process 6,000 Iceland images in CS4 and then redo them in CS6 to be able to see the adjustments, and have spent at least 5-6 hours doing many re-installations and trolling the Adobe site in a circle just trying to contact support. WHEW!!!
I am very grateful for your help!! Thank you.
My warmest wishes,
Marianne
[email protected]
http://www.mariannebarcellona.com
http://www.barcellonaart.com
http://www.barcellonaphoto.com
http://mariannebarcellona.nyartistscircle.org/
1.212.864.7721
1.917.916.2080
Marianne Barcellona
749 West End Avenue, # 8B
New York, New York 10025
USA
Original message

When filtering by keyword and using "Edit In" with Photoshop, edited file does not show up in list

When I do an "edit in" using CS5 and save it, the edited file does not show up in my LR4 preview window.
Message title was edited by: Brett N

There are two distinct modes by which Edit In... may first open an image into PS: as a fully pre-converted rendered file; or as an on-the-fly converted image in memory.
(When LR opens a PS-edited image a second time into PS, using "Edit Original", the former option is always used.)
In the latter case, it is ACR which does this on-the-fly conversion, working from the original image (as imported into LR) plus your subsequent LR adjustment metadata. This means ACR compatibility with LR becomes an issue - as it is not, with the pre-rendered file option.
There is a useful clue to which mode is being used:
the title of the PS document window, in the case of the on-the-fly conversion, still shows the name of the Raw file (or whatever) that you started with in LR... no file has been saved as yet, to say any different. You can Save or Save as, wherever and under whatever name, and from now on LR will look there for your edited image. Or if you close unsaved, LR has no edited image to show at all.
the title of the PS document window in the pre-rendered case, is the name of a file already saved on disk and already showing in LR. If you then saved this elsewhere, you would merely make a duplicate which LR cannot know about - and if this duplicate is the one which contains your PS work, LR will accordingly not show that. It is busy showing the content of the specific file that was passed to PS.
So, if inside CS5 your document is called something like IMG23334.dng - you can save it wherever you like. If inside CS5 your document is called something like IMG23334-edit.tif - you will have to save your changes back to that exact same file, in order for them to be seen in LR.

I am trying to read my iMessages from my iPhone 4S on my iPad 2, but the messages do not show up on my iPad 2. I made sure that the receiving email address is the same on both devices and both are signed into my single Apple account.

I am trying to read my iMessages from my iPhone 4S on my iPad 2, but the messages do not show up on my iPad 2. I made sure that the receiving email address is the same on both devices and both are signed into my single Apple account.

Is it possible that the person who sent the message to your phone sent it to your phone # instead? Try sending a message to your phone via the email address and see if it shows up on the iPad.

When I sync my iPod Classic, the changes I made (Ratings, Last Listened) do not show up on my computer.

When I sync my iPod Classic, the changes I made (Ratings, Last Listened) do not show up on my computer.

Try another Sync. On occasions, I've know a first Sync to behave like this.

I made a purchase on iTunes and it is not showing on any of my devices. When I tried to watch the show in my purchased file I could not. When I go back to iTunes it tells me I made the purchase already. Why can't I access my purchases. Case

I made a purchase on iTunes and it is not showing on any of my devices. When I tried to watch the show in my purchased file I could not. When I go back to iTunes it tells me I made the purchase already. Why can't I access my purchases. Case # 506294747

Hi Paul,
If you are having an issue such as this with an item such as a movie purchased from the iTunes store, you may want to report it to the store. Use the steps in this article -
Report an problem with an item you bought from the iTunes Store, App Store, Mac App Store, or iBooks Store
Thanks for using Apple Support Communities.
Best,
Brett L

DNG changes made in LR4 not visible in LR3

I am working on a MacBook Pro with both Lightroom 3 and Lightroom 4 installed. I wanted to test my assumption DNG is a DNG and that changes made to a DNG in LR4 would be visible in LR3, so I made changes to a DNG in Lightroom 4, clicked Update DNG Preview and Metadata and then exported that file as a DNG. I imported that DNG into a different Lightroom 3 catalog and the changes were not visible, even after choosing Read Metadata from File. Those same DNG changes were not visible in Bridge either. The changes are visible in the Finder, but not in Preview. Anyone know why and how I can make Lightroom 3 recognize the DNG changes made in LR4?

Your DNG is original-image-data + an adjustment recipe stored as metadata that tells LR how to display and export the image. Your DNG does not contain adjusted image data like a TIF or JPG would.
Your adjustments are probably in Process Version 2012, new to LR4, and only understood by LR4 and ACR 6.7/ACR 7.x and newer. The embedded JPG preview in the DNG is what LR4 put there.
There is a difference between a DNG being understood as a valid raw file by older Adobe products which it can, and those older products knowing how to interpret the adjustment recipe, which they can’t.
Specifically, LR3 doesn’t know how to interpret PV2012 adjustments, since it was last updated in 2011 and only knows about PV2010 and earlier.
Other non-Adobe programs, like Finder, can only see the embedded JPG preview which is the LR4 rendering, but LR3 re-renders the image using its own interpretation of the settings it can understand.

PS 5 not showing adj made in LR4

Similar Messages

Maybe you are looking for