PS 6 and Win8

Can I use Photoshop Elements 6 with Win8? Are there any special downloads I'll need to do this? Thanks

Hi Columbiaa,
Please go through the link , it specifies all the system requirements.
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-photoshop.html#main_ Older_Versions

Similar Messages

The Command Get-ADUser -Identity username -Properties * No Longer Works Due to a Bug in PowerShell 4 and Win8-1 Pro

The 'Command Get-ADUser -Identity <username> -Properties *' No Longer Works Due to a Bug in PowerShell 4 and Win8-1 Pro
It produces the following error:
Get-ADUser : One or more properties are invalid.
Parameter name: msDS-AssignedAuthNPolicy
At line:1 char:1
+ Get-ADUser -Identity ********** -Properties *
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (**********:ADUser) [Get-ADUser], ArgumentException
+ FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.ArgumentException,Microsoft.ActiveDirectory.Management.Commands.GetADUser
This is already documented in these forums:
1. http://social.technet.microsoft.com/Forums/systemcenter/en-US/1bf9568e-6adc-495d-a37c-48877f86985a/powershell-40-and-the-activedirectory-ps-module?forum=w81previtpro
2. https://connect.microsoft.com/PowerShell/feedback/details/806452/windows-8-1-powershell-4-0-get-adcomputer-properties-bug
Unfortunately, in typical style, Microsoft have archived number 1 without bothering to respond with advice. Can someone in Microsoft please advise your customers here if this is being investigated and of any available workaround or fix ?
-- huddie "If you're not seeking help or offering it, you probably shouldn't be here."

Did you consider using one of the "workarounds" below to run an existing version of the AD Module for PowerShell under a specific PowerShell version:
a. #require -version 3.0 (in ps1 script)
b. powershell -version 3.0
Thank you for sharing with us if this helps.
Desmond, did you miss my reply below ? I still haven't heard back from you:
>> "Desmond,
>>
>> Thanks for your quick response.
>>
>> I'm running this just as a command, not in a script:
>>
>> Get-ADUser -Identity <username> -Properties *
>>
>> When I try to run powershell
-version 3.0 first, then run the above command, it still fails with the same error. When I then run Get-Host,
the version still shows as 4.0 so maybe there's more I need to do to launch a 3.0 host. Anyway, from what I've read it seems your command is more aimed at script compatibility.
>>
>> Can you help ?"
-- huddie "If you're not seeking help or offering it, you probably shouldn't be here."

Unable to sync my replacement 7th generation Ipod Nano. Previous nano had no issue. Both Win7 and Win8 Pc's fail sync. I am an admin on both machines.

I don't know why my new 7th Generation Ipod fails sync diags on both Win7 and Win8 computers. I am an admin on both machines. The computer sees the device, but ITunes does not, but yet I can eject the ipod.

Hello Dee Nano.
It sounds like your iPod nano is recognized by your PCs, but it isn’t recognized by iTunes. Try the suggestions in the article linked below, they will resolve most issues like this.
iPod: Appears in Windows but not in iTunes
Cheers!
-Jason

Acrobat XI unstable on Win7 and Win8

Anyone else having trouble with creating/appending a webpage from browser to a PDF.
Typical problems:
firefox crashes during creation
Creation popup window keeps running with no progress
Error popups "DDE unable to communicate with Acrobat"
In ability to capture Web pages that have JavaScript
( The most frequent language on the web; Acrobat has JS built in )
When this happens, I stop having the browser append the page,
and instead request the page be appended from Acrobat.
Serious Flaw: If the page I'm viewing was arrived at by Single Sign On
to the site, Acrobat will only collect the signon redirection page.
That is why appending the page from a logged in browser is important.
Most annoying: Acrobat does not remember the name of the last PDF used.
It always truncates the name into something unusable.
I have to ALWAYS find the last PDF I was writing to for a new "Append" request
Acrobat becomes non-responsive when DDE connections fail.
It means I cannot launch Acrobat at all ... even for different pdf files.
Solution: Task Mugger and kill the running Acrobat processes.
I have several Acrobat dmp files ... I opt-in to "make Acrobat better" ... is Adobe
getting these crash failures? Something more I have to do at my end?
As far as I can tell by dates, the crashes had nothing to do with Task Manager kills.
I see the same problems in both Win7 and Win8.
Acrobat X worked much better ... but the plugin was only available for Internet Explorer,
so I upgraded to XI.
Super annoying: Adobe does not appear to ever have tested appending from a
browser to a PDF that was just created. It always presents a corrupted filename
for selection.
My Solution:
Create an entirely new directory
Place the pdf I want to create there as the only file
When Acrobat "forgets" the filename, it does still remember the directory
and I don't have to search for the PDF I want to append to.
It still is an additional keystroke to select the file ... which really slows me down.
Please fix these things. Or do I have to wait for XII version to get any fixes?
I am using Acrobat XI Pro Version 11.0.06

Perfect example of failures. Viewing this page from firefox, "convert to PDF"
http://forums.adobe.com/message/5140738#5140738
It hangs and two windows are open:
Apparently can't copy/paste images. Here they are:
And the firefox crash when I attempted to Append to a pdf:

Lynx K3011 volume and Win8 Button no function in Windows 8

Hi, I just got my brand-new Lynx tablet and have installed all Windows 8 updates. Everything works fine, exept the "Volume" and "Win8 Home" Button are without function. Do I have to install additional drivers? In the device Manager everything looks fine. I dont think that it is a hardware issue.
Thanks for your help!
Patrick.

I recently found this information on the micorsoft troubleshooting website and thought of your post, not sure if you had found a solution but hopefully it is helpful.
My keyboard volume controls suddenly stopped working
If the volume controls on your keyboard stops working, check the Human Interface Device Access service on your computer to make sure it is set to Automatic.
In the Start menu, type View local services.
From the Search Results list, select View local services.
In the Services dialog box, locate Human Interface Device Access. Make sure the status is set to “Started.” If it is not started, click Start the service.
Right-click Human Interface Device Access and select Properties.
On the General tab, in the Startup type, select Automatic, and then click OK.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

TouchSmart IQ500 and Win8?

Hello.
HP TouchSmart IQ500.
System #: FK936AA-ABG
Serial #: 3CR----B32(blanked for security)
Model #: IQ518a
What is HP's position on this machine and Win8?
I have one of these machines running Win8 64-bit, but it often gives problems.
Video driver issues with the screen going blank(which I learn by reading other posts, is quite a common issue with Win8 on the TouchSmart machines), and recently, sound problems, where the sound just mutes by itself, and there is nothing you can do to make the sound work again. Sometimes, if you wait a while it works again, but the sound can just fail half way through a movie for no apparent reason. There is NO warning, wierd sounds or anything - it just dies and you can't get sound again from that point. Rebooting SOMETIMES fixes the problem, but only with about a 75% success rate. It is NOT the application causing the problem with the sound - no applicaiton that uses sound will output it - not even the Windows Sound app in Control Panel.
So, at the end of the day, can someone at HP please confirm for me if this model machine is actually compatible with Win8?
I am guessing that it is NOT supported at this stage, as I have not been able to find any Win8 specific drivers for this model machine, unless I am not looking in the right place, and that is quite possible!!!!
Thanks for any replies.
This question was solved.
View Solution.

Graeme1974,
This is a peer-to-peer user supported forum. HP maintain no official presence on this forum. Any response received by an employee is that of their own and not HPs.
THIS is HP's position on Windows 8 and any non-Windows 8 HP computer;
Not all Windows 8 features may be available on all PCs.
Your particular experience with Windows 8 will be determined by the capabilities of your PC.
HP is providing upgrade instructions and drivers will be available for most Windows 7 systems sold after 1st October 2011.
If you want to restore the original operating system after upgrading, you must create HP recovery media before you upgrade.
Please note that if you purchased your system prior to October 1, 2011, HP has not tested these PCs or developed Windows 8 upgrade instructions or drivers for them. Upgrading such systems may be difficult or impossible.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Can't get brushes and swatches to sync, only settings/workspaces. (Win7 and Win8.1, latest photoshop)

I have Photoshop CC 2014 installed and updated on a Win7 machine and a Win8.1 machine. When I go to edit>preferences>sync settings, everything is checked, but it seems that only my workspace settings get uploaded. It never seems to transfer my swatches or brushes. They are stored in the default location and show up in the brush and swatch menus.

Do they play in iTunes?

Print servers and printers problems on Win7 and Win8

Hello,
We have some computers, working on Windows operating system in the office: a few forking on the good old XP sp3, one running on the Win7 x64 home edition and one running on Win8 professional (the last one installed for new OS testing purposes)
During last two months I have tested a few print servers attempting to find one which can work with Windows 7: Trendnet, Synology, and D-link print servers. However, unsuccessfully. Here is the result:
   1) Any print servers is working perfectly with WinXP sp3 (full printing and MFP function support, easy configuration and access, successfully scanning and printing operations in 100% cases)
   2) No one print server is working correctly with Win7 home x64 (mostly successful installation but complicated and unclear configuration; printed pages often is missing, no scan support for MFP.
   3) There is a little bit better situation with Win8: 100% printing support on the same equipment but no scan support for MFP
Could you please help me with followings:
1) Could you please help me configure print servers and printers on Win7 x64, including printing and scanning support?
2) Could you please help me configure scanning support for Win8?
Please find full list of affected hardware bellow:
1) Machines, running on Win XP: Panasonic CF-29, CF-74, HP Compaq dc7600, some Acer laptops;
2) Machine, running on Win7 x64 home: Asus UX21, (OS probably was preinstalled on the factory)
3) Machine, running on Win8 pro: Lenovo X200 tablet
4) Printer HP LJ1020 with drivers for XP and Win7, x86 and x64
5) MFP printer Canon MP600 with drivers for XP and Win7, x86 and x64
6) Print server: D-link DPR-2000
7) Router: Cisco RV042G
All the machines has correct drivers installed, all the printers supports all the services if connected to computer directly. I have made all possible steps solving mentioned problems, including automated problem solving wizards on Win7.
Thanks in advance for your support

Hi,
Regarding the printer configure issue, I would like to share the following article:
Managing Printers and Print Servers
http://technet.microsoft.com/en-us/library/cc754769.aspx
According to the scanning support for Win8, it is better to post this issue in Windows 8 forum for more help.
Regards,
Vincent Wang
TechNet Community Support

Hi, Is it possible to disable "make adobe reader my default pdf application popup" in a network (Win2012R2 server and win8.1 clients) ??

please help me with this.

System board for use in models with 1 GB of discrete graphics memory 616244-001
System board for use in models with 512 MB of discrete graphics memory 608203-001
System board for use in models with UMA graphics 608204-001
http://h10032.www1.hp.com/ctg/Manual/c02437489.pdf
Graphics is built into the motherboard.
Can only upgrade with new motherboard.
Only a few laptops have graphics cards that can be up graded. "Like Alienware"
Good luck.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

SetupIP fails on Win7 and Win8

Updating groupwise client via SetupIP works perfectly on WindowsXP workstations. Launching the SetupIP.exe from Win7 or Win8 machines, we get this alert:
SetupIP is unable to copy Setup-Files. Contact Systemadministrator.
Apache configuration seems to be correct and wireshark gives no hint. The error must depend on the local workstation.
Any help is appreciated. Thanks in advance
--Ferdi

fgiese,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Qosmio X870-15D and Win8.1 - popup message "Flash Cards Test Version"

Hi eveyone !
Since I updated my X870-15D native Windows 8 to Windows 8.1, I get a popup message telling : "+*TOSHIBA Flash Cards*+ (title) +*Win8-TestVersion*+" and two buttons "OK" and "Cancel", each time I boot up ; whatever button I clic, the popup disappears
How can I get rid of that irritating popup please ?

You could try to uninstall the applications from Win 8.1 system but Im not quite sure if this would be helpful.
Fact is that Win 8.1 upgrade should be done using special step by step instruction. In case you will not follow this instruction, some software parts might not work properly.
By the way: In case you have problem only with the Flash Cards Support Utility, I would recommend you to uninstall this Flash Cards Support Utility (also called TOSHIBA Function Key Utility) from the system. After notebook reboot, download the TOSHIBA Function Key Utility for Win 8.1 and install it again.
[TOSHIBA Function Key Utility for Win 8.1|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=231&selProduct=7670&sel ShortMod=null&language=13&selOS=46&selType=all&yea rupload=&monthupload=&dayupload=&useDate=null&mode =allMachines&search=&action=search&macId=&country= all&selectedLanguage=13&type=all&page=2&ID=88191&O SID=46&driverLanguage=42]

R7770-PMD1GD5 GOP UEFI BIOS to use WIN8 and WIN8.1 boot feature

Hello!
I would like to use the Win 8.1 boot feature, so can I get a new BIOS to my videocard?
The original ROM is here:
<iframe src="https://skydrive.live.com/embed?cid=8D31B093A6C5CB21&resid=8D31B093A6C5CB21%211949&authkey=AGlpnJb2B1gUKtY" width="98" height="120" frameborder="0" scrolling="no"></iframe>
S/N:
602-V271-070B1303042303
The sticker also has the following numbers:
912-V271-014
R7770-PMD1GD5
And I also have another question. Can I use Atiflash on 64bit Win8.1?
Thank you

Use >>this<<
Don't try flashing in Windows.
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (qd3.rar) and put the included file (TV271MH.150) on that stick.
Rename TV271MH.150 to 150.rom. Put the atiflash.exe also included in the archive provided on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 150.rom [ENTER] and let it flash the vbios.

Updated Creative Cloud and WIN8, CreativeCloud constantly sign off

Hi, updated win8 to win8.1 and as always updated creative cloud, was it because of these updates creative cloud constantly sign off, which means I need now to enter every time my log ing info and accept terms and so on (which is highly annoying to do it every time, you turn on any adobe program)?
Thanks

Hi Fastnoc,
You can go through this thread, it can help to resolve your issue:
http://forums.adobe.com/message/5703632#5703632
Regards,
Rajshree

Drive partition clarifications and win8.1 rollback to win8

Please forgive me if I have this in the wrong category, and a bit wordy.
Model Dell XPS 18 with i5 and 500gb HDD and 32gb SSD.
The primary drive was repartitioned into a 120gb drive for the OS and a 324gb for files.
Under disk management there are shown 8 partitions: 500mb EFI system, 40mb OEM, 490mb OEM, 120gb Primary with boot page and crash dump, 350mb recovery, 324gb primary for files, 10.42gb recovery, 8.97gb OEM.
The 32gb SSD drive only displays an 8gb hibernation partition.
Within the Intel Rapid Storage program it lists both the 8gb FFS and a 22gb Dev_Cache.
Why are there 2 recovery partitions (350mb and 10.42gb)?
Why are there 3 OEM partitions (40mb, 490mb and 8.97gb)?
I installed the win8.1 update and intend on restoring the machine back to win8 with a Dell OS recovery and Restore USB Key. My understanding is the Win8.1 update deletes the original Dell win8 recovery image. If there is no more dell recovery
image available, can the OEM partitions be removed to recover space? Future file and image backups can be managed via windows.
The XPS 18 machine does not use windows method of hibernation, but uses Intel Rapid Start with the hibernation partition on the SSD.
Because the hibernation data is on the SSD drive, can the 6.6gb hiberfil.sys file in the root c: be deleted without any performance hit or other issues?

Thanks for your response. Dell sent a restore flash drive, and yes the MBR of the EFI partition remained as win8.1 after the restore, and yes, all the Dell recovery data is wiped clean with the win8.1 update. Only after the EFI partition
is deleted, corrupted or reformatted, only then the restore flash drive creates complete new clean partitions on the entire drive, and just 2 of the them: EFI and Primary, all back to win8, shiny and new :-)
Also, my testing indicates the hiberfil.sys file is not needed with the Intel rapid start partition on the SSD drive, and the pagefile.sys can be set to a very small size when using the Intel rapid storage with the SSD drive. This saves another 12GB
of HDD!
Here are some comments I want to share with others that will influence your decision to update to 8.1.
Win8.1 is not a simple update, and there is almost no chance of going back without the original restore discs. Even so, if the restore utility does not see any corruption, it won't restore the MBR. The result is you might
have a Win8 OS with a Win8.1 MBR. When you make a recovery flash drive, it even tells you to label it as win8.1.
My main issue with Win8.1 was the lack of system-wide XP style scaling. With a 1080p monitor, and scale set above the 125% standard, results in MOST programs text looking fuzzy, and MOST windows dialog boxes and windows utilities too. The
programs can be set to XP scaling individually by changing properties, however the windows dialog boxes and built in programs cannot. Until this is corrected, no win8.1 for me. They claim it is due to the up and coming 4k monitors, and if they
let you globally set it to XP scaling, the program text would be too small to read. Maybe so, but let me make that decision. Moreover, why do windows own programs and utilities do not scale properly and look fuzzy. This is a deal breaker.
The start bar in win8.1 is only a little better, however there are many programs (like classicshell) that correct it to be just like win7 or vista or even XP. There are programs that let you set the metro background image like 8.1 too.
I wanted to share the results of my experience and research.

Portege M750 and Win8 - metro interface, and touchpad don't work

For those of you that, as myself, tryed to install windows 8 in a Toshiba Portege M750 and had problems in portrait tablet mode I recommend the following driver it works perfectly:
http://cdn.wacom.com/U/drivers/TabletPC/ISD_DualTouch_710-8.zip
The problem I had was that swipe didn't work with metro interface, and touch didn't work also and in portrait, strangely, when you touch the secren two arrows with different directions woul appear.
This driver solved my problem.
Hope that this can help...

Problem with wacom dual touch driver solved

Portege M750 and Win8.1 Pro -tablet buttons don't work

Hi
I'm having difficulties installing the tablet buttons in WINDOWS 8.1 Pro. Everything else works, perfectly.
In Windows 8 Pro this buttons worked nicely, but now, after a clean install of Windows 8.1 Pro two of the buttons don't work. The buttons are the Toshiba assist button and the presebtation button. I've tried to configure them in Toshiba assist software but nothing happens.
I'm sure I've installed all drivers that made wverything work with Windows 8. As anyone tryed this and add success?

> I'm sure I've installed all drivers that made wverything work with Windows 8
Windows 8.1 is not Windows 8 and many of Toshiba Win 8 drivers and tools dont work or are not fully compatible with Win 8.1
As far as I know the Toshiba does not support Win 8.1 on this Portege M750.
This means that no Win 8.1 drivers will be released and in such case some notebook features like the control buttons could not work properly.
Fact is that using Windows Vista or Win 7, such buttons were controlled by Value Added Package. This package does not exist for Win 8.1 and has been replaced by other software called Toshiba System Driver
So in case you want to try to get the buttons to work, I recommend checking this with Toshiba System Driver

PS 6 and Win8

Similar Messages

Maybe you are looking for