PS and Bridge showing different collors

Hi, when I edit a picture in PS with layers and masks, and save it as PSD, it looks the same in Bridge. But when I save the same picture as JPG it gets darker in Bridge. But when I open it in Iphoto or Facebook it looks the same as in PS. Never had this before, could somebody explain to me why this is and is this normal?
I have CS4 but downloaded the trial both the same.
Regards Femke

Yes I mean cropped ;-)
Version is 11.0.2 so that's a good thing
I did what you said, but still the same problem :-(
Left JPG isn't cropped the right one is (it is a quick edit not perfect)
Bridge settings
Collor settings PS
Setting when save an image

Similar Messages

  • I m updated my phone but some problems occured, so i connect it to itunes and it said "your iphone is detected in recovery mode" so i tried restore it but was unsuccessful and it shows different unknown errors such as 14, 2009,1611. Please help

    i m updated my phone but some problems occured, so i connect it to itunes and it said "your iphone is detected in recovery mode" so i tried restore it but was unsuccessful and it shows different unknown errors such as 14, 2009,1611. Please help

    Hello Mubashir surf google and try pressing power and home button at the same time untill apple sign shows up and then leave it .
    Otherwise surf google you mite have to edit you host file in windows , system32
    Let me know if it works

  • Software inventory report and PC show different information

    Hi,
    The scenario is the following:
    SCCM 2012 R2.
    Clients with windows 8.
    The report "Software registered in Add Remove Programs on a specific computer" and "Programs and Features" show different information.
    Programs and features screenshot(ordered by name):
    Report screenshot (ordered by name):
    The question is:
    Is the above normal behavior?
    if not
    How to get in the report "Software registered in Add Remove Programs on a specific computer" all of the software listed in "Programs and Features"?
    Thanks in advance!

    Take a look at that device in Resource Explorer.  Notice that on a 64-bit device there is an 'Installed Applications' class and and 'Installed Applications (64)' class.  This data comes from the registry, and on a 64-bit operating system there
    are actually two separate 'Add/Remove Programs' lists that are aggregated in the OS user interface.
    If in Resource Explorer you see all of the software you expect to see, but not in the report, it is likely because the report is only looking at the 'Installed Applications' class and and not 'Installed Applications (64)' class.
    If you enable the 'Installed Software' class (either by going into the client settings or the AI node), you will notice that the 'Installed Software' class is a combined version of both the 32-bit and 64-bit applications.  This is much easier to report
    off of.
    I hope that helps, 
    Nash
    Nash Pherson, Senior Systems Consultant
    Now Micro -
    My Blog Posts
    If you've found a bug or want the product worked differently,
    share your feedback.
    <-- If this post was helpful, please click "Vote as Helpful".

  • Mac and Windows showing different hard drive space remaining?

    Hello Guys,
    I am using my 1tb hard drive with mac and windows and while checking the space remaining, my mac says roughly 600gb left and my windows comp. says about 500gb left. I am just wondering which one of the storage remaining statements is correct and why they both show different numbers (by 100gb)? If it helps, this also happens to my 16gb flash drive. mac says 10 gb left, and windows says less space left (dont remember actual number, but was roughly 6-8).
    Just asking becuase I want to know why such a big difference in size remaining. Could it have to do with the way each OS sees what defines the harddrive as full?
    if it matters, my hdd format is MS-DOS (FAT32).
    Thanks a lot,
    krm1897

    haha its been 2 years. And no, i didn't figure it out, but i speculate it may have to do how Mac OSX and Windows reads the FAT file system (my tb hdd was FAT formatted so i could use it on both OS) and calculates remaining space.
    That may be right, or it may be completely wrong lol
    krm1897

  • ODS and Infocube showing different results

    Hi,
    I loaded same data to Infocube and ODS but they are both showing different result in BEX.
    ODS
    ODS report is showing summarised values e.g
    vendor               order value                   invoice value        date
    00001                    20                               20                 01.01.2007
    Infocube
    result is showing not summarised values
    vendor               order value                   invoice value        date
    00001                    20                                 0                      0
                                  0                                20                  01.01.2007
    I would like to make the infocube result same as the ODS because I am remodelling so that we start reporting from Infocube rather than ODS.
    thanks

    Hi,
    this is the scenario
    currently we are reporting from ODS object which fetch data from 3 ODSes. now I am asked to remodel so that we can report from infocube not ODS.
    steps I have taken so far.
    - created new infocube
    - created 3 update rules ( same Update rules that gives the reporting ODS data).
    my target is to make sure that the current ODS  report is the same as the infocube report but so far the report is not consistent
    I compared the data in the ODS and infocube and they are exactly the same but the report is showing differently

  • Dba_index_name and dba_ind_columns showing different results

    Hi All,
    I am confused why it is showing different results:
    [email protected]#>select index_name from dba_indexes where table_name='CRBTPROV_FINAL';
    INDEX_NAME
    CRBTPROV_INDX1
    [email protected]#>select index_name from dba_IND_COLUMNS where table_name='CRBTPROV_FINAL';
    INDEX_NAME
    CRBTPROV_INDX1
    MSISDN_IDX
    When trying to drop index MSISDN_IDX it gives error:
    ERROR at line 1:
    ORA-00054: resource busy and acquire with NOWAIT specified
    But when trying to check where all the index is used using v$access:
    select * from v$access where object='MSISDN_IDX';
    no rows selected
    Regards,
    Kirti

    If I run the following query on a 9.2.0.6 database, no index is listed:
    select type, count(*) from v$access group by type;CURSOR
    FUNCTION
    NON-EXISTENT
    PACKAGE
    SEQUENCE
    SYNONYM
    TABLE
    TRIGGER
    VIEW
    It seems that index is not taken into account by v$access ?

  • Count and Sum show different in Summary tab

    Hello friends,
    Webi 4 version
    I have a webi dcument with 4 report tabs. Summary, Expense,Revenue and Forecasting.
    I have a SUM value in Expense tab and Revenue tab. I also have Count value in Forecasing.When I copy these SUM and Count values to Summary tab, they show different values than those in other tabs.
    Please help me to resolve this
    Thanks
    Renpal

    Hi Renpal,
    Even if we write the aggregate values in to a variable and if you copy that variable in Summary tab it may not give the same result.For Example.
    If count of Sales orders in Detail tab is showing as 500 and in Summary tab it may show as 489. This is because in Detail tab there might be some cells which are "#" or Not assigned. so due to granularity it will count each and every cell, incase of summary all # or Not Assigned are calculated as 1.
    Can you check wrt the above example where exactly the data is not matching.
    Regards,
    G.SaiNath

  • Mac and iPhone showing different number of songs

    I have iTunes match enabled to the same (and my only) account on several devices. They are all showing different # of songs:
    iPhone: 1,331
    iPad: 1,328
    Mac: 1,315
    PC: 1,139
    Why? How do I get all the tunes on my Mac and especially PC?
    I have synched with the cable to my PC and received no errors.
    Help!

    haha its been 2 years. And no, i didn't figure it out, but i speculate it may have to do how Mac OSX and Windows reads the FAT file system (my tb hdd was FAT formatted so i could use it on both OS) and calculates remaining space.
    That may be right, or it may be completely wrong lol
    krm1897

  • Mac, iPad and iPhone show different iCloud Drive content

    I'm getting mad about iCloud drive.
    For hours I try to get all my devices in sync. But they all show different content. In Finder I can see only 4 app folders containing the documents (actually pages, keynote, numbers and pdfexpert). Browsing the iCloud drive on the iPad for example using the pages app I can also see a GoodReader folder and some more. Some of them are empty folders (maybe empty folders are hidden on mac by default?) but some of them contain folders and files which obviously won't download to my Mac.
    There are also some folders related to apps I removed from all my devices. It's ok if these app's iCloud folders stay in the cloud if they contain any documents but they stay there even if they are empty and there seems to be no way to remove these folders manually (even the web interface of iCloud greys out the trash when such a folder is selected).
    When I use OS X Preferences to remove some old app's iCloud content I can do this for some of them but then (all of a sudden - can be after two of ten removals) the list on the left side shows only "Backups" (or sometimes "Backups" and an unspecific "Documents") and you have to close the Preferences and reopen it a little later to see the complete list again. And showing the app icons seems to be a problem too (including the iPad / iPhone preferences -> iCloud) - some of them are shown, for some of them there are only placeholders.
    Am I doing it wrong or are these common problems?

    Same problem here – specifically, the CONTENTS of "iCloud Drive" are different when accessed:
    A) in the Finder on Yosemite
    B) on the web at iCloud.com
    C) on an iOS device
    The MAJOR problem for me is that my Goodreader folder only shows up on the iOS device, making it impossible for me to access my Goodreader files. This is a huge issue for me as my workflow depends on having access to those files.
    In general, however, it's ridiculous that you can copy data to iCloud Drive on your iOS device and then you cannot read that data anywhere else.

  • Mozilla and IE show different applications referencing the same URL

    Hi, I have a very strange problem.
    I deployed a web app, using Sun App Server 9, directly from a directory of the server. Then I made some changes and redeployed the application. But IE still showing me the app before the changes, and Mozilla shows me the application after the changes.

    I solved this problem,
    The two browsers showed the same jsp's, but different non jsp files, such as js, and css. I only had to refresh the page.

  • [SOLVED] mount command and fstab show different file systems

    I recently setup my /etc/fstab to mount by LABEL.
      LABEL=ArchLinux        /    ext2    rw,noatime,errors=continue    0    0
      LABEL=Data30GB        /data    ext2    rw,noatime            0    0
    When I reboot, these two drives work fine. But I run the "mount" command and it shows:
      /dev/disk/by-uuid/8fac6ab0-3d40-4676-bf30-b23c482b47b9 on / type ext2 (rw,noatime,errors=continue)
      /dev/sdb1 on /data type ext2 (rw,noatime)
    I'm curious, why does mount not list things by how the fstab shows them? By the way, I have other drives labeled and mounted by label and it shows the device (i.e. /dev/sdd1) instead of the LABEL as fstab shows on those as well.
    Anyone know why?
    Last edited by HuckleSmothered (2011-08-06 19:38:35)

    LABEL= and UUID= aren't something the kernel understands -- they're tags interpreted by blkid that resolve to a device, e.g.:
    $ blkid -lt LABEL=root -o device
    /dev/sda2
    This functionality is provided by util-linux's libblkid, which /bin/mount links against. In other words, that syntax in /etc/fstab is just a convenience feature.
    Last edited by falconindy (2011-08-06 19:30:09)

  • Why do my MacAir and iPhone show different times?

    I have a MacAir running OSX Yosemite. I also have an iPhone 6. I get both to update the times shown on their clocks automatically. Last month, there was a 2 minute difference between the two; now there is a 3 minute difference. (the MacAir is always ahead) This might sound like a tiny issue but I use my MacAir for presentations and have my phone showing the time fullscreen too - to ensure I keep exactly to time. So it's quite off-putting to have two different times showing.
    Any idea how I can get them in synch with each other?
    Many thanks!
    James

    I have a MacAir running OSX Yosemite. I also have an iPhone 6. I get both to update the times shown on their clocks automatically. Last month, there was a 2 minute difference between the two; now there is a 3 minute difference. (the MacAir is always ahead) This might sound like a tiny issue but I use my MacAir for presentations and have my phone showing the time fullscreen too - to ensure I keep exactly to time. So it's quite off-putting to have two different times showing.
    Any idea how I can get them in synch with each other?
    Many thanks!
    James

  • Apple watch and iPhone show different step counts

    When I look at the activity app on my watch and on my phone, they show a different number of steps. For the most part i've been walking with both my phone and watch, so I'm wondering why the number doesn't sync between the two. Obviously on the phone its including some additional steps that it is counting that the watch didn't get. I have not calibrated it yet (doing a workout with the GPS on the phone). When I look at the raw data int he Health app, the phone is obviously counting a couple more steps each time. Is this something other people are encountering or will it fix once I've calibrated it?

    I have the same issue, but my iPhone actually has fewer steps counted. I did a dumb test to count steps myself and looks like my iPhone has more accurate steps. The thing bothering me most is the Health app picks steps from iphone and watch. It doesn't recognize sometimes the data is duplicated.

  • ITunes and iPod show different song counts... not all songs sync

    Hi,
    I've been having this problem for many many years.
    I have more than 18,000 songs now, and the song count in iTunes is always 5 higher than on the iPod.  I have my iPod set to sync the entire library.  All songs in the library are checked for sync as well.  I get no error message during sync that something might be missing, incompatible, or corrupt  When I look at iPod music in iTunes it has the wrong count as well.
    Every time a new version of iTunes comes out, I send feedback to Apple regarding this issue.  As expected, Apple ignores their feedback, and from what I can tell they ignore the community forums as well, and they have yet to address the issue in any way, or even contact me about it.
    I'd like to find which songs are bad and remove/delete them from my library and collection or fix them.  Is there a sync log hidden somewhere that I can check to see which songs will or won't sync?  Why doesn't iTunes tell us whether or not it expects a song to sync or if it's iPod compatible?  Why does it say less songs will sync without giving a reason why?
    I've heard that iPods don't sync duplicate files, but I've looked at my duplicates.. At some point, Apple screwed that up too, it shows songs that are from different compilations as duplicates now, instead of looking at the data proper to determine if it's a duplicate, it seems to just look at the Artist and Song Title and even that doesn't seem to be correct because I have more duplicate song titles listed and in some cases it lists songs from two different artists as being duplicates.  I have many more duplicates listed in itunes than the discrepancy in the song count would suggest... 3,835 more songs to be exact.
    I've tried to select only checked songs and get the same results.  I've tried to restore the iPod and I get the same results.  I've tried clearing the library completely and reloading all songs and I still get the same results.  I've scanned through the library and all songs appear to have compatible settings.   All my songs are either mp3 or m4a(aac) formats.  I don't use playlists at all. 
    If anyone knows of a solution, please let me know.  I don't want to have to check every single file.
    Thanks!

    Dougout78 wrote:
    Every time a new version of iTunes comes out, I send feedback to Apple regarding this issue.  As expected, Apple ignores their feedback, and from what I can tell they ignore the community forums as well, and they have yet to address the issue in any way, or even contact me about it.
    So that you know, for the future, Apple makes it very clear (specifically so, when you submit Feedback) that they do not respond to the feedback directly. They do however, read the feedback and consider suggestions for improvements to iPods. They also look for - and act upon - bug reports etc. That's what the Feedback is for.
    They also make it clear that they do not monitor or respond to these discussions. (That said, Apple employees are free to - and do look at - some of the posts and have been known to contact posters directly when looking for further information regarding bugs.)
    As you have now found, this community (as Apple now prefers to call it) can often help sort out your problems, espcecially when skilled users such as tt2 (aka Steve) are let loose!

  • Reports and Console Show Different Information for Compliance

    Hello,
    Could someone enlighten me as to why for a specific Software Update deployment group I should see different compliance figures when I look at the deployment status in the console and when I run a Software Updates - A Compliance report?
    For example for a recent batch of updates sent out I get the following figures from the Monitoring > Deployments part of the console; Total Assets 4,239, Compliant 2821, In Progress 37, Error 14, Unknown 1367.
    If a run a report for the same batch of updates I get; Total Assets 4,238, Compliant 3343, Non-compliant 725, Unknown 170.
    I suspect the difference might be due to a change having taken place for the set of updates e.g. Microsoft changed one of the updates to expired etc. and this has caused the clients to have to check their compliance status again.
    What changes to an update that is part of a deployed update group would cause clients to have to check their compliance again and why would the report be different to the console?
    Thank you for any help / advice.
    Stephen

    Hello,
    I would be interested to know how the two different ways of looking at what should be roughly the same data can show quite different stats. At the moment for one deployment of software updates the Deployment Status pie-chart tells me that 3,006 clients are
    compliant but the report tells me that 3,360 are compliant.
    What seems to have happened is that an update that is part of the deployment changed its status so that the clients are having to check their compliance status again. This is slowly happening and I can see on the Deployment Status pie-chart the number of
    compliant clients is slowly going up but on the report the compliant number seems to have remained high almost as if the need for the clients to re-check their compliance has not been taken into account.
    Thanks.
    Stephen

Maybe you are looking for