PS/Bridge not recognizing raw files - HAVE updated DNG Converter & Camera RAW

Had to re-install my Adobe CS3 due to hard drive crash.
Now that I have re-installed, Photoshop & Bridge won’t recognize my raw files.
I HAVE updated my Adobe Camera Raw (3 times in the last hour), and my DNG Converter (4 times in the last hour). Nothing works. Any ideas?

If in photoshop cs3 you go to Photoshop>About Plug-in and click on the words Camera Raw, which version does it show?
Since photoshop cs3 can only use up to camera raw 4.6 and the EOS 5D Mark II requires at least camera raw 5.2, cs3 won't open those files directly without some help.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
The 4.6 camera raw plugin update for photoshop cs3
Adobe - Photoshop : For Macintosh : Camera Raw 4.6 update
You could use the 8.7.1 dng converter to convert the files to dng copies which then bridge should see and photoshop cs3 should be able to open.
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
Camera Raw: How to use Adobe DNG Converter - YouTube

Similar Messages

Can't open raw file after update 6.6 camera raw

Just updated camera raw in photoshop 5 on a mac pro running 10.6.8 os wont open a raw file and program freezes and must force quit to close. Lightroom update has problems as well. Don't recommend updating to either

Same Problem. Everything worked fine until ACR 6.6 install just now on Windows 7 machine (CS 5 Production Premium). Bridge/Photoshop can no longer read my Canon 5D Mark II RAW files, but work fine with older Canon camera RAW files, TIF's, jpegs. How do I uninstall just ACR 6.6 and reinstall ACR 6.5 without doing anything else? Thanks.

After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and conver

After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and convert raw files. MacBook Pro with Snow Leopard. No such problem before this reinstallation.

You should install Camera Raw 4.6.
Visit this page and follow the instructions carefully:
PC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
-Noel

When importing RAW files in Photoshop why does camera raw 8.6 only import 1 size?

When importing RAW files in Photoshop why does camera raw 8.6 only import 1 size from canon 5d mark iii, in older versions I used to be able to import the files as larger images. It use to have a number of options for the images size. The option now is smaller than the maximum size used to be.

You know what - I'm sorry
I'd had a crazy long all-nighter session sorting out images for a client, then decided - when I should have simply gone to bed - to set up the new photoshop. At the very start I made a silly mistake, tried to sort it out then decided to call it a day, responding to your remarks with the problem still in my head but feeling more and more tired.
Responded again to your comment earlier with the problem still in my head but not in front of me on the screen - however with a fresh head I just turned it all on, opened up PS and today could instantly see what was going on - Oops!
Thank you for being patient with a sleep deprived photographer who must have been getting annoying yesterday
I am officially embarrassed
M

Just upgraded to 10.8.4 and now can't open canon raw files in photoshop cs5 with camera raw plug in 6.7

i've just upgraded to os 10.8.4 and now i can't open canon raw files in photoshop cs5 with camera raw plug in 6.7 which worked perfectly prior to the upgrade....anyone else encountered this issue?

Adobe's software is a mess in terms of the fact that it's sprayed all over the place and may not survive an OS upgrade. Try reinstalling Photoshop CS5.

Adobe DNG Converter と Camera Raw 2.3 アップデートインストール方法

インストール方法、それからDNG Converterの使用方法の文書がスクリーンショット入りで公開されています。
Adobe DNG Converter と Camera Raw 2.3 アップデートインストール方法 http://support.adobe.co.jp/faq/faq/qadoc.sv?224945+002

DNG Converterを立ち上げ変換しようとすると、「サポートされているCamera Rawファイルがソースフォルダーに含まれていません。」というエラーメッセージが出てCanon EOS Kiss digital NのCR2データの変換が出来ません。何か操作手順にミスがあるのでしょうか。
Mac OS x 10.3 , Photoshop CS2

Convert previously converted raw files with Adobe DNG converter?

It seems that i am not able to convert my raw files that have already been previously converted to dng with the dng converter. I am wanting to start editing all over again with the raw image but before i can start editing a raw image, i have to convert it to a .dng. Why won't the converter program let me convert the raw file again and just give me the option of naming it differently than the first file? What am i doing wrong?!
Alternatively, is there any way that i can tell ACR (either in bridge or photoshop) to get rid of all edits made on the first .dng converted file and start over again with in-camera image?
Thanks for any help!

I don't know why your DNG converter has stopped working. Have you updated to a later version? But you don't need to go through that process again. In Bridge, just right click on the images and there is an option to clear the Camera Raw settings. Or, from inside Camera Raw, press the Alt key and one of the buttons will change to "Reset". In either case all camera raw settings are cleared, giving you the image as it was downloaded.

Unable to open Sony A77II Raw files in PSE11. [was: Camera raw]

I have the Sony A77 ii and i cannot open the Raw files in Elements 11. It says the file appears to be from a camera model that is not supported by the installed version of Camera Raw. I have the latest version installed. Does anyone else have this issue?

According to this link :
Camera Raw plug-in | Supported cameras
the A77 II is only supported with ACR 8.5 which is not compatible with PSE11. It would need PSE12 with the latest ACR update.
The free solution is to download the Adobe DNGconverter.
That free and independent software can batch convert a whole folder of raw files to the DNG raw format that PSE11 can read.
FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
T find the download link, scroll down to:
What if my camera is not compatible with my version of Photoshop Elements?

Cannot open Olympus OM-D E-M5 Raw files in CS6. [was:camera raw?]

I am trying to open ORF raw files, but PS6 can't open them. I am at Camera raw 7 and the update file says I am fully updated. There are higher versions but I don't know how to access them.

Are you sure you mean Photoshop version 6 the is a very old version of Photoshop before ACR existed. ACR first became available as a extra cost plug-in for Photoshop version 7. ACR started to be shipped with Photoshop with Photoshop CS. Each version since Photoshop CS has a newer version of ACR which is not compatible with older versions of Photoshop. So
CS ACR version is 2.4
CS2 ACR version 3.7
CS3 ACR version 4.6
CS4 ACR version 5.7
CS5 ACR version 6.7
CS6 and CC ACR version 8.4 however the new features in ACR 8.4 for CC are crippled in CS6. CS6 just get the new Camera support.
http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
If you have CS6 use menu help>Updates it should find the ACR 8.4 for CS6 and update your installation. If it does not you can down load it and the DNG converter. However don't convert to DNG just use your OFR RAW files.
http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html
If you do mean Photoshop version 6 you need to see if Olympus has a RAW converter for Photoshop version 6 for your camera.

Nikon D3s RAW files are underexposed by Lightroom / Camera RAW

I'm used to shot RAW files only.
I recently bought a D3s, alongside with my D700 and I noticed D3s files were darker than D700 ones, by about 1/2 or even 2/3 stop. Initially I thought the problem was one of the cameras, but after some tests I found the problem is my RAW converter. Infact this happens only with NEF (RAW) files, and if I shot a RAW+JPG image, the D3s RAW file opened in Lightroom 4 (or Camera RAW) is underexposed if compared with its JPG on-camera version.
I think no camera setting is affecting this behaviour. I reset either the D3s and the D700. No D-Lighting is set on-camera. This happens only with the D3s and only with Camera RAW and Lightroom.
Other RAW converters display the D3s RAW file correctly exposed, the same as its JPG version, and the same as the D700 RAW and JPG. I tested so far Capture One, DxO Pro Optics and Raw Therapee.
Color profile used is custom, but I tried using Adobe Standard and the result is the same.
Default develop settings affect only color profile and sharpening, and I got the same problem on a fresh new installation of Lightroom where no default develop settings are set.
If anybody with a D3s can check if his NEFs are underexposed if compared to their JPG versions when opened in LR or Camera RAW, I would appreciate that much.
Any idea about the origins of my problem would be great.
Thank you.

alessandroavenali wrote:
I know, DdeGannes, but a different rendition of 2 pro cameras at the same settings is a bit frustrating.
Would it be better to underexpose the D700 while shooting, or setting a default -0,5EV on every imported picture, if the problem goes on?
Moreover, seems the Nikon D3s ISOs need to be pushed +2/3 to obtain the same exposure as the D700 in LR workflow. So the advantage of this great sensor could be lost.
I'd like to know more about D700 and D3s rendition comparison in LR/ACR at same settings.
It's not unusual for two camera bodies of even the same exact make and model to have Exposure differences of up to 1/3 EV, which is very noticeable. Ditto for White Balance differences. For Example:
Camera 1 is +1/3 EV and Camera 2 is -1/3 EV = 2/3 EV Difference
Camera 1 White Balance is -500KTemp and Camera 2 is +500K Temp = 1000K Difference
Tack on minor differences between the LR Camera Profiles and it will get much worse if heading in opposite directions, as above.
The only way to compare the raw NEF files from two cameras is to use a RAW converter that applies NO profiles, NO Gamma Correction, or any other modifications to the raw pixel data. See may post here for information on 'Rawnalyze:'
http://forums.adobe.com/message/3952812#3952812
You can download it here:
http://dave-anderson-photo.com/files/software/Rawnalyze/Rawnalyze_2.10.4.0.zip
Online manual here:
http://www.oitregor.com/numeric/Rawnalyze/Rawnalyse_doc/datas/RawnalyzeGuide.htm
None of the external links in the manual work, but nothing to worry about. If you have any questions on how to use it let me know.
I believe the Nikon D700, D3, and D3s cameras are supported in Rawnalyze 2.10.4.0. If not you can convert the NEF to DNG.

Can't open canon g16 raw files. I have updated to Adobe camera raw 8.2 and am working with PS CS6.

Here is my issue, I can't open the Raw files from my new Canon G16. I have run all the Photoshop updates and even installed the Camera raw 8.2 update but still cannot open my raw files. The will open in Canons digital photo professional program so I know they are not broken files. I have even installed the DNG converter and they will not even open with that. What am I doing wrong? I bought this camera specifically for the ability to shoot in raw. My canon 60d raw files work fine.

Why on Earth did you upgrade only to ACR 8.2 ?
The current version of ACR is ACR 8.4. You should ALWAYS update to the latest version. Once a camera model is supported, it will be supported in all subsequent releases of ACR.
Beside new camera support, each ACR update contains any number of unannounced, unheralded bug fixes, improvements and enhancements.
What is the exact version of your OS and of your Photoshop CS6? For instance, if you're on a Mac, you should be running Photoshop CS6 13.0.6. I can't remember offhand what the latest version for CS6 is.
Did you install ACR correctly. ACR 8.2 should work for your camera (but update ACR anyway). What version shows up when yo go to About Plug-in… > Camera Raw.
You of course need to relaunch Photoshop, maybe even reboot your machine, and then Purge the Cache in Bridge.
Next time you ask a question, please give sensible, complete and detailed information from the beginning:
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Why is Adobe Bridge not showing the changes I had done on Camera Raw?

Dear all, I am trying out Adobe Bridge and discovered that after editing in Camera Raw (ACR), the changes was not shown on the thumbnail.
I am using photo (1), which is the top left corner photo, as my main and tried to apply changes to the remaining 5 photos.
I randomly changed the temperature to the mix and click "done".
You can see that (1) thumbnail did not change after my changes in ACR. Nevetheless, I then apply previous conversion to the remaining photos.
Neither (1) nor other photos have changes on the thumbnail.
Please note that when I check all the photos, inside ACR, I can see the changes (in temperature).
How may I make the thumbnail change show in Bridge after I edited in ACR? The purpose is that I hope that from the look (without clicking), I know there is changes (e.g changes in temperature).
[Note: I do not own the photo(s)]
Thank you for your help.

Hi station_two, thank you for the very quick respond. I had found out the problem is my setting as followings:
My solution is as followings (after Develop setting> Previous conversion):
Once again, thank you very much.

Unable to open Canon 650D Raw files in PS CS5 [was:Camera Raw]

Hi everyone
I have tried to downlaod my raw files CR2 to my photoshop cs5 but it keep saying
"Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw."
My camera model is Canon 650d which is supported and i have downloaded the latest raw update but everytime i go to the Help > About Plug in
it keep saying that my version is 6.3.0.79

The 650D requires Camera Raw 7.1 or higher.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
CS5 is only compatible with Camera Raw up to version 6.7. Thus you cannot open 650D Raw files in CS5.
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Thus you must either upgrade to CS6 or CC or convert your Raw files to DNGs using the free Adobe DNG converter. Then open and edit the DNG files in CS5.
http://www.adobe.com/products/photoshop/extend.displayTab2.html
http://blogs.adobe.com/crawlspace/2011/03/why-doesnt-my-version-of-photoshop-or-lightroom- support-my-camera.html

Why can't I send older RAW files from iPhoto to Adobe Camera RAW?

I have a 20" Intel iMac (OS X 10.5.8) and use iPhoto '09 (Version 8.1.2) for storing and organizing the digital images produced by my Nikon D200 and D700 cameras. When I wish to edit a photo I right click on the image and select Edit in External Editor. The external editor is Photoshop Elements 6 for Mac.
In iPhoto/Preferences/Advanced for RAW Photos I have checked "Use RAW when using external editor." Recently I successfully sent new D200 and D700 RAW images from iPhoto to PSE 6 for conversion by Adobe Camera RAW (Version 5.4.0.57). However, I was not successful in attempting to do the same thing with older D200 RAW images taken more than three years ago. In all cases what showed up in ACR were JPEGs rather than the RAW images. I don't understand why this is happening. What is needed to resolve this issue? Any remedial information will be appreciated.
Bob

Well all of that tells us that the Library is sound and not corrupt - which is good news.
Now the question would seem to be 'Why isn't iPhoto respecting the settings you've chosen in the Preferences?"
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
Regards
TD

"Developing" raw files in iPhoto vs Photoshop Camera Raw. Observations ...

I need to generate 3 "exposures" from a large group of raw (Nikon D200 NEF) format images. A bracket of sorts: 0 ev, -2 and +2. Ideally I would like to do it in iPhoto since It would be much faster than opening each photo in Photoshop ACR and saving it from there. But I was concerned that the quality of the "developing" would not be as good in iPhoto than in PS.
However, when I generated my 3 exposures by using Edit > Adjust > Exposure slider and setting it to +2 and -2 then saving as tiff16 and then compared those with the same 3 exposure created out of ACR, I find that the iPhoto version does a much nicer job keeping the very bright highlights in check. The PS versions seem to have much more clipping in those same highlights.
Has anyone noticed this? Is iPhoto actually better than ACR at generating different exposures from raw files?
Thanks for any help.
Bo
P.S. Changing the exposure is the only thing I have modified. Everything else is left at default.

Thank you guys. I think you are probably correct on this.
Terence, re: Aperture and NEF, I know this was discussed a lot a while back but I've been out of the loop for a while. Since the raw converter is at the OS level, does this mean that iPhoto and Aperture use the same converter and therefore should yield the same results at that level?
Thank you
Bo

PS/Bridge not recognizing raw files - HAVE updated DNG Converter & Camera RAW

Similar Messages

Maybe you are looking for