PS CC 14.2 Mavericks shows bug message, when trying to manipulate mesh templates

Bug message (program error) when trying to manipulate a mesh template (Ball, Winebottle, cube etc) in 3D

Is this a plugin you are developing or one you have purchased?
If purchased, I would try to contact the company that made it.
If you are developing, then I would get the original Dissolve (or other) example and make sure it is working correctly with the OK and in the Cancel scenario. If so, then copy that example and start modifying and working your way towards what you now have. You should be able to tell when things go wrong and that would help me figure out your crasher.

Similar Messages

  • Why am I getting an error message when trying to use a template?

    Why am I getting an error message when trying to use a Pages template?

    You are getting an error message because there is an error.
    Knowing wht version of Pages you are using, what template you are attempting to open, and what error message Pages is sending you might help determine why you are getting that specific rror message. Without those, the first sentence above i pretty much all that can be said with any assurance.
    Regards,
    Barry

  • Itunes shows error message when trying to update software

    I have updated my laptop and itunes. I have had an issue with my phone connecting to any new wifi as well. I have also reset my phone.

    so the error looks like it happens when you try to back up your phone.
    try this help link /
    iOS: Troubleshooting backup issues in iTunes

  • Getting an error message when trying to save a template in Pages. It's saying that it can't be exported as a template. Help!

    I'm trying to save a Pages document as a custom template but everytime I try, I receive the following error message:
    The document “AuctionItemInfo.pages” could not be exported as “AuctionItemInfo.template”.
    Any advice?

    Several users have had this problem in Mountain Lion. The system has decided you don't have read/write permissions. Have you done any updates to your system lately? Using Disk Utility to repair permissions after any upgrade or update, especially to the system, is a good practice. So first, I would repair permissions & then if you still have the problem, locate the file in Finder & go to File > Get Info & look in the Sharing & Permissions section. You should be the only one with read/write permissions but something has happened. Click on the words under "priveledge" next to your name & change it to read & write. You will probably have to enter your admin password.

  • How do I get Firefox to display the information bar when a pop up is blocked I accidentally clicked on "Don't show this message when pop-ups are blocked" when a pop up was blocked. How do I get this message to reappear again when a pop up is blocked?

    I just updated Firefox but can't get it to display the message when a pop-up is blocked. Most times I want them blocked but sometimes I need them enabled.

    You can see a pop-up block icon in the right corner of the Status Bar if you have chosen to hide the information bar at the top.
    You can left-click that pop-up block icon on the Status Bar and remove the check mark from "Don't show info message when pop-ups are blocked"
    You can look at these prefs on the '''about:config''' page and reset them via the right-click context menu:
    Status bar icon: browser.popups.showPopupBlocker
    Info bar at the top: privacy.popups.showBrowserMessage
    To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
    If you see a warning then you can confirm that you want to access that page.

  • Show error message when Install SM7 in step 4 execute Service

    Hi All
    Show error message when Install SM7 in step 4 execute Service.
    Anyone can help me fix the problem pls!
    Regards
    Kevin
    Start the setup task 'Determination of SID and InstanceNumber for Diagnostics agent' ...
    Information for SAPInst:
    sid=SMD
    number=98
    2009.06.08 11:16:59
    Task completed with status 0
    INFO 2009-06-08 11:17:00.0
    Execute step initSystem of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO[E] 2009-06-08 11:17:00.250
    FSL-02077  File system export (share) saploc does not exist.
    INFO 2009-06-08 11:17:00.484
    Execute step initED of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO[E] 2009-06-08 11:17:00.718
    FSL-02077  File system export (share) saploc does not exist.
    INFO[E] 2009-06-08 11:17:05.265
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    INFO 2009-06-08 11:17:05.609
    Execute step createOSUser of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO[E] 2009-06-08 11:17:05.875
    FSL-02077  File system export (share) saploc does not exist.
    INFO[E] 2009-06-08 11:17:08.187
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    INFO[E] 2009-06-08 11:17:10.531
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    INFO[E] 2009-06-08 11:17:12.859
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    INFO[E] 2009-06-08 11:17:15.156
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    WARNING[E] 2009-06-08 11:17:20.281
    FSL-01002  Unable to create account hk-is-000818\smdadm. HRESULT=0x80005009
    INFO 2009-06-08 11:17:20.562
    Execute step initOS400Parameters of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO 2009-06-08 11:17:20.781
    Execute step initING_DI of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO 2009-06-08 11:17:22.312
    Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\summary.html.
    INFO 2009-06-08 11:17:28.828
    Execute step ntpatch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|NW_Update_DLLs|ind|ind|ind|ind|3|0
    INFO 2009-06-08 11:17:29.093
    Node C:\WINDOWS\system32 already exists.
    INFO 2009-06-08 11:17:31.0
    Execute step runChecksStep of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|3|0
    INFO 2009-06-08 11:17:32.390
    Execute step createAccounts of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0
    INFO 2009-06-08 11:17:33.171
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.203
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.250
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.281
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.328
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.375
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.421
    Nothing to do. User privileges are an empty string.
    INFO[E] 2009-06-08 11:17:35.703
    FSL-01027  Account user="hk-is-000818\SAPServicePAS" does not exist.
    WARNING[E] 2009-06-08 11:17:40.796
    FSL-01002  Unable to create account hk-is-000818\SAPServicePAS. HRESULT=0x80005009
    WARNING[E] 2009-06-08 11:17:40.796
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2009-06-08 11:17:40.843
    FCO-00011  The step createAccounts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .

    hi Subhash
    tkx it work
    but I got another error when install afterwards. do u know how can fix , many tkx
    Kevin
    WARNING 2009-06-09 20:39:02.421
    Execution of the command "D:\oracle\product\10.2.0\db_1\bin\lsnrctl start LISTENER" finished with return code 1. Output:
    WARNING[E] 2009-06-09 20:39:02.437
    CJS-00095  Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
    WARNING[E] 2009-06-09 20:39:02.437
    CJS-00095  Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
    ERROR 2009-06-09 20:39:02.468
    FCO-00011  The step StartListener with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener was executed with status ERROR .

  • From an iPhone 5, I receive the following error message when trying to download content from a radio show app:  "Alert Could not parse feed."   How do I fix?

    From an iPhone 5, I receive the following error message when trying to download content from a radio show app:  "Alert Could not parse feed."   How do I fix?

    Since you're using a 3rd party app, suggest contacting the app developer or looking at their support site for help.

  • Show Me Messages When I Launch Reader

    I have created a package ArcoRead.msi with a MST.
    I was wondering if I could automate the following settings:
    - Show Me Messages When I Launch Reader
    - Don’t Show Messages While Viewing A Document
    I want the first one to be deselected and the second one to be selected.
    How can I manage that ?  By customize package or by registry key ?
    Any help is welcome.

    found it myself using procmon.exe
    This two entrys to disable "Messages from Adobe" (See Preferences > General)
    HKCU\Software\Adobe\Acrobat Reader\10.0\IPM\bDontShowMsgWhenViewingDoc: 0x00000001
    HKCU\Software\Adobe\Acrobat Reader\10.0\IPM\bShowMsgAtLaunch: 0x00000000
    Would there be a HKLM solution as well. Does anybody know ?
    For now I added the keys with the Adobe Customization Wizard 10 in my MST. Works perfectly.
    Next step will be creating the file HideItems.js to hide Adobe Online menu items.

  • Show scheduling message when direct edits to Start date

    Is therre a way to show scheduling message when someone is editing the Start date directly for a task, I understand that a constrain get set by doing so, yet I also want to display some kind of scheduling message to the PMs, is it possible.

    Yes, Julie you are right. If "Advice from Planning Wizard" option is cleared in Options, Project updates a  key to value 0
    Key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\MS Project\Options\PlanningWizard\Display PlanningWizard
    But if "Do not tell me about this again" is selected in Planning Wizard dialog the below key is updated and there is no way to turn this on through Options:
    Key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\MS Project\Options\PlanningWizard\PlanningWizardCases
    By default, the Key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\MS Project\Options\PlanningWizard\PlanningWizardCases has the value 11111111111111111111111111111111111111111111111111111
    Also, there are several combinations too. If "Do not tell me about this again" is selected when a successor task is moved from the predecessor, the Key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\MS Project\Options\PlanningWizard\PlanningWizardCases
    is updated with 11111111111011111111111111111111111111111111111111111
    Sai PMP, PMI-SP, MCTS Project, MVP Project

  • Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

    macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. 

    I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
    This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
    After making your backup try the following:
    Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
    Launch the App Store, click the "Store" menu, and sign in with your AppleID.
    Open the main page of the App Store and search for iPhoto.
    If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
    If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

  • I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please

    I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please help.

    This link shows that ACR 8.3 supports the Nikon D610 and 6.7.1 was the final version for CS5.
    Camera Raw plug-in | Supported cameras
    So you can upgrade to CS6 and ACR 8.7.1
    or using the DNG converter, convert your Nikon raw files to dng format to open in CS5.
    Here is the download link: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
    or Windows: Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
    And here is a great video tutorial on how to use the converter.
    https://www.youtube.com/watch?v=0bqGovpuihw
    Gene

  • Getting "layer break" error message when trying to Preview a single sided DVD, or build an ISO image or disk folder

    Hi!  Hoping someone might be able to help with an odd problem.  I haven't found anything in the forums or the web that match my symptoms.
    I've been using Encore CS6 (v6.0.1.013) on a MacBook retina over the past year to successfully create a number of single sided DVDs with menus, chapters, and all that.  I usually make a copy of a previous DVD project, and then replace video assets with the new files and transcodes, move and rename chapter markers, and rework the menus in Photoshop.  I then will build ISO images for both DVD and Blu-Ray (both single-sided), and use those to burn many copies of each DVD for clients.
    This week, while developing one of these projects, when trying to build a DVD ISO image that looked like it would fit on a 4.7 GB DVD, I received the "layer break" message ("The chosen layer break does not satisfy dual layer requirements.  To fix this, either set a new layer break manually, or choose to set layer break automatically.") because (I'm guessing) the material was too long for the 4.7 GB DVD (the Build screen now shows about 5GB of material are in the project).  This is the first time I've seen that message - usually Encore just tells me the material is too big for the DVD.
    I re-transcoded the material down to well under 4.7 GB (about 3.9 GB), reverted and replaced the transcoded files, and now the DVD build screen shows that there are about 700MB free on a 4.7 GB DVD.  But I still have not been able to build any version of the DVD (image, folder, disc), without getting the "layer break" message.  I also now get this same layer break message when trying to "Preview from Here" any menu, killing my ability to preview the DVD menus in Encore.
    Just to see what would happen, I chose an 8.4GB Dual Layer DVD, and chose "manual" instead of "automatic" for the layer break selection, but never got the layer break selection dialog box, just the "layer break" error message.
    I typically build both DVD and Blu-Ray images from the same material in the same project.  I use different transcoding settings for each, and I have been able to build a Blu-Ray ISO without this "layer break" error on the Blu-Ray build (which is about 24.5GB when built).  And as I mentioned before, this is the first project on which I've even seen this layer break message.
    Any suggestions would be greatly appreciated!  I'd rather not recreate the project from scratch, but I'm worried that I may have to.
    Thanks
    Jon

    The total project being small enough may mean you have one layer that is too big. Both layers have to be smaller than half the disk, right?
    Be sure you "run as administrator" for dual layer projects.
    Encore may set the layer break correctly if it finds a good place, but there are numerous complaints about it being unreliable.
    Build to a folder (no layer break is set), then use ImgBurn to build and ask to be prompted for layer break. ImgBurn is also unreliable under some circumstances.
    The most frequent problems appear to be when there is no good location for a break. Do a search for "layer break imgburn" and you will see a variety of strategies.
    http://forum.imgburn.com/index.php?/topic/1777-how-to-create-a-double-layer-dvd-video-imag e-file-using-imgburn/
    Also see these posts:
    Neil Wilkes
    http://forums.adobe.com/message/3466255#3466255
    Neil Wilkes
    http://forums.adobe.com/message/4054265#4054265
    Neil Wilkes
    http://forums.adobe.com/message/4054269#4054269
    Jon Geddes
    http://forums.adobe.com/message/4002647#4002647
    shuchi shrivastava
    http://forums.adobe.com/message/3905911#3905911
    Jon Geddes and Neil Wilkes
    http://forums.adobe.com/message/4003221#4003221

  • Error message when trying to salve pages or numbers documents

    All of a sudden i get the following message when trying to save newly created pages or numbers documents into my documents folder
    "The file “Untitled.numbers-tef” couldn’t be opened". THis is for doocuments created from scratch.
    Can anyone please help?
    I'm relatively new to new to the iMac and OS so not sure if something has been set up incorrectly - but it's been working OK for approx 3 months.
    Any help greatly appreciated.

    I spoke too soon. I began a new movie and imported
    photo clips, which rendered just fine. However, I
    can drag transitions in between the photos, but they
    simply will not render. Everything was just swell
    until yesterday afternoon when I changed the length
    of the clips so that there would be enough room for
    the transition. I tried to do multiple clips at the
    same time, but they never rendered. It was then when
    I was unable to add any more transitions.
    Aha! That may be different problem. There's a bug in iMovie that makes it impossible to update image clips after you empty the iMovie trash. If you imported the image with the Ken Burns checkbox ON, the bug can affect you later.
    It's possible, I suppose, that this bug not only prevented you from updating the clips to a new duration, but made it impossible to add the transition to the clips.
    After importing your images with the Ken Burns checkbox on, you might try dragging the source image out of the iMovie trash, described here:
    http://discussions.apple.com/thread.jspa?messageID=2139814&#2139814
    Karl

  • Error message when trying to sync iPhone 3GS.

    After updating my iPhone 3GS with the newest iOS and restoring it, I now get this message when trying to sync the iPhone 3GS
    The iPhone “iPhone” could not be synced because the sync session failed to finish. Have recently purchased 4S and need to convert.
    Will this cause problems? Thanks

    Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
    So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

  • Error Message When Trying To Upload To Itunes

    getting the following error message when trying to upload ibooks author file to itunes:
    ERROR ITMS-9000: "OPS/glossary10.xhtml(3): 'g-653A7486-5795-43F4-B413-78C74BAF3E1A': fragment identifier is not defined in 'OPS/content2.xhtml'" at Book (MZItmspBookPackage)
    any suggestions? thanks so much!

    Bob - I'm basing this answer on my epub, not my iAuthor experience. When I get an odd error message like that, it usually means I have a graphic lingering about that is not not actually used. Here's how I would go about locating it in iBooks Author: First I would turn on Show Layout Boundaries and Show Invisibles in the View menu. Then starting at the beginning, I would go page by page – clicking on the page – and doing a Select All (Command-A). If an unused item appears, I would delete it. Then when you are satisfied, re-upload the file.
    As I say, this is speculation based on my epub experience, so take it for what you think it's worth.  Cheers.  - Fabe

Maybe you are looking for

  • Open a .pdf!!!

    Hy, I've got a file: usa-grants-inc.pdf from a friend of mine and I really need to open it. I'm trying to do that with Acrobat Reader but I keep getting an error message. Is there any other way I can open my file? I really need that information. Can

  • New iTunes Issues

    I share my iTunes Account with my family, we all have our own computers with libraries so this has never been an issue.  However when iTuens updated the new verison has ALL of our music on my libary page, and it comes up in shuffle.  How do i Remove

  • Outlook 2010 cached mode cannot see GAL but Outlook 2007 can via Exchange 2010

    Hi, I have a problem similar to this but with a different cause. Our OAB config looks good from both Outlook 2007 and Outlook 2010. Both can see the GAL in non-cached mode but in cached mode only 2007 can see the GAL. In 2010 it's just not there. Eve

  • How to I get my new iPhone to go back to set up so I can restore from old iphone

    I just got a new iPhone but before I could restore from my old iPhone back up - I needed to update it - i had to set up as new iPhone to do this - how do I now go back to set up to get my old iPhone restored onto my new phone

  • Maximum size of the Queue data structure

    Hi All, I would like to know what is the maximum size of the Queue? Thanks, Girish G