PS CC 2014 Camera RAW will not update to 8.5 on mt desk top, iMac. Camera RAW update to my laptop. Both OS the same 10.9.3 iMac

Pls advise because this has happened before w Camera RAW on my desk top but not laptop. Adobe support can fix, share computer, by re-installing on the desktop but it is a real pain.

When I replied to your post, I was replying to an original post that came in via my e-mail today at 2:30 and was the most recent thing in the ACR forum and had remained unanswered for 1.5 hours, so I decided to reply.  Had your post been put in a forum I subscribed to and happen to notice days ago, then I might have seen it, then, but didn't see it until this afternoon, and the e-mail version of your post only had the scant initial information, not the subsequent question and answer about your OS that you'd replied to on the other forum.  So as you say, I had not read the thread, because it was on a forum I didn't subscribe to.  So be shocked and perhaps awed as is necessary.  My treat.
Second, I did make a typo when I said Win8/8/8.1 and it should have been Win7/8/8.1, which might have been deduced by the repeated 8, so you could have asked for clarification.
Seeing as you're on Windows 7 which ACR 8.4 should be compatible with, one minor detail is that I see in the compatible Lightroom 5.4 requirements that it needs Windows 7 Service Pack 1, which would mean you'd want to be caught up on your Windows Updates, which I would assume you'd be.
There are direct links to ACR 8.4(.1) on Jeff Tranberry's blog that are distinct for PS-CS6 and PS-CC so maybe that is what isn't right?
Keeping Photoshop Up-To-Date
You might check what version of PS-CC you have.  14.2.1 is the most current, and maybe that is prerequisite to ACR 8.4.1, I don't know. 
If worse comes to worse, uninstall everything Adobe, then run the CS Cleaner then re-install CC Desktop and see what happens as you install PS-CC and it's updates.  It may need to be run several times.
Once you're ready to retry your installs, you also might try to Quit CC Desktop and run it As Administrator in case there is a permissions issue.
The CS Cleaner can be found, here:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Similar Messages

  • Have Mac OS 10.7.4 installed on an iMac-3.1 GHz Intel Core i5...the Finder will not find file on Windows mounted volumes...what setting should we be using...tried the same settings as our iMac 10.6.8-did not work!

    Have Mac OS 10.7.4 installed on an iMac-3.1 GHz Intel Core i5...the Finder will not find files on Windows mounted volumes...what setting should we be using...tried the same/working settings as our iMac 10.6.8...did not work for 10.7.4!

    Added note: We are tring to find files on Windows 2008 Server Standard...

  • Adobe reader will not open pdf files I have saved as, or, export as pdf to my desktop (latest Maverick). The same file does open when I am on the source website (i.e. user manuals etc.). Why?

    Adobe reader will not open pdf files I have saved as, or, export as pdf to my desktop (latest Maverick). The same file does open when I am on the source website (i.e. user manuals etc.). Why?

    iMac G4, Mac OS X (10.4.9)
    Make sure you have the latest Adobe Reader installed for your OS.
    http://www.adobe.com/support/downloads/product.jsp?platform=macintosh&product=10
    Did you try using Preview. If you control click on the PDF on your desktop you can use the "open with" option.

  • My apple TV will not let me use my gmail account to log in to Youtube. Is it because it is the same email account I use in my Apple ID?

    My apple TV will not let me use my gmail account to log in to Youtube. Is it because it is the same email account I use in my Apple ID?

    I'm having the same problem.
    Error message reads: This account cannot be used with Apple TV. Please sign in with different account.
    I'm using my gmail account to access Youtube as i do on my Mac. I have a completely different Apple ID account.

  • HT204088 My purchases in iTunes on my iPad will not recognize my account balance in my desk top so purchases are put on my credit card. How do I use my account from my iPad?

    iPad does not recognize my iTunes account balance

    Thank you for your advice. I followed your directions, but came up with the same results. However, I did discover that whenever I open up the iPhoto Library that is already existing on my MacBook a certain set of pictures shows up. But then when I open up the iPhoto Library from the Hard drive another set of pictures shows up. BUT not ALL of my pictures are showing up on the iPhoto Library from the hard drive. At least the last two years of pictures are not showing up?! Actually, it appears that all the pictures are there from when I started using iPhoto about 5 years ago up until around the time that I got my iMac desktop computer and started using that (2 years ago). I have noticed that more recent videos I have made are showing up in a folder on the hard drive, but will not appear when I open up iMovie?! Any ideas on how to access my pictures from the last 2 years off of the hard drive???

  • Using ITunes Tutorials will not play.  Using windows XP.  All software up to date.  I know others have had the same issue, however I have not seen a solution.  I appreciate any advice.

    iTunes Tutorials iwll not play.   Using windows XP.  All software up to date.  I know others have had the same issue, however I have not seen a solution.  I appreciate any advice.

    I have traced the problem to a corrupted profile.  When I captured the images in question, I also used Color Cherckr to create a profile for processing.  When I apply that profile to the adjustments I make, I can no longer "Edit In".  If I use another profile, even one that I created using Color Checkr at a different point in time, I don't have the issue.  Something seems to have corrupted the new profile.  I will re-create the profile and see if the issue is resolved.

  • What do I do if a Cd will not play? It shows on my desk top but wont automatically play.

    I put in a cd and it shows on my desk top but will not automaticall open.  When i try to manually open it, it just shows me all of the components of the cd.

    open sys. prefs, cd/dvd select how you want disc to open

  • When I try to use TD Webbroker to open my Tax Documents in eServices they will not open and it hangs up my Firefox. I am using windows 7 and if I try the same procedure with Internet Explorer it will work. Any ideas?

    I am using Windows 7 and AVG

    But I can't... find... it... It's not there.
    Unless you're talking about the entire Mozilla Firefox folder (which isn't what the thing you copied says,) there is no installation folder.

  • I have tried on two occassions to downlaod firefox 4 and it will not download, I am using a dell desk top windows xp pro and have firefox 2 already installed, why won't version 4 download?

    When the screen prompts me to run the download program, everything seems to be going right, but once the program goes through it's paces, I'll check the firefox version in my program files and it still says I only have firefox version 2.

    The file version is 4.0.1, but the product version is 2.0.1. See screenshot.
    You already have v4.0.1 installed.
    You might want to consider disabling the Zango plugin you have installed because this app will likely download other spyware without your knowledge. See this Wikipedia article on the subject: [http://en.wikipedia.org/wiki/Zango_%28company%29 Zango]
    You can disable it by clicking the Firefox button, go to Add-ons, then Plugins. You'll find it in there.

  • I have had my I pad 2 for about six weeks with very little to complain about until today. My problem is that Sarfri ikeeps freezing or will not open at all.  I have tried shutting it down then when I reopen it still has the same page up ! Help,

    What should I do?

    Try clearing its cache (Settings > Safari > Clear Cache and also Clear History), and also try closing the app completely : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.

    I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.  I get a message saying that Camera Raw does not support my camera type but it always has in the past.  The bridge no longer shows the picture view of my NEF files.  These are Nikon NEF files from the Nikon 5100 DSLR camera.  How do I fix this?

    I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.  I get a message saying that Camera Raw does not support my camera type but it always has in the past.
    When you re-installed Photoshop, you also re-installed the version of Camera Raw which shipped with Photoshop - in other words you reverted to an older version of Camera Raw which does not support the D5100.
    Camera Raw plug-in | Supported cameras
    The D5100 was first supported in Camera Raw version 6.4.
    In Photoshop, click Help > Updates to update Camera Raw.

  • Photoshop CC 2014 for PC will not copy or paste

    Running:
    Photoshop CC 2014 for PC
    Windows 8.1 Pro, R2 64 bit, AMD FX3 8350 with 16GB RAM. 75% of RAM free
    Photoshop CC 2014 for PC will not copy or paste.
    When I create a line of text and want to copy and paste the text in the same document, the copy and paste functions are not working. The commands on the Edit menu are grayed out. CTL+C and CTL+X and CTL+V do not work.
    I have the correct layer selected.
    There is nothing else selected, just the text.
    Copy and paste fail on new documents, existing documents, documents with backgrounds, documents without backgrounds.
    I deleted all my Photoshop settings in Roaming>Adobe>Photoshop CC 2014
    I uninstalled Photoshop without saving preferences, removed all files and folders and then reinstalled.
    Photoshop will still not copy and paste.

    I honestly don't know what may be wrong on your system to cause what you're seeing, but I can confirm that on my fully updated Windows 8.1 Pro x64 system equipped with ATI 7850 I can do cut/copy/pastes as you would like to do, so it's not a basic incompatibility.
    Are you selecting the characters by dragging the mouse across them, then copying?
    When pasting, have you set an insertion point first?
    -Noel

  • No matter what I try, Camera Raw will not update from 8.3 to 8.4.1 in PS CC

    I've tried completely uninstalling Bridge and Photoshop CC and reinstalling and I'm still on Camera Raw 8.3.
    It just will not update.
    I also tried the link to manually install and it just says the patch is not applicable.
    Any ideas why even after completely removing and reinstalling both Bridge and Photoshop my Camera Raw will not update?
    Thanks

    When I replied to your post, I was replying to an original post that came in via my e-mail today at 2:30 and was the most recent thing in the ACR forum and had remained unanswered for 1.5 hours, so I decided to reply.  Had your post been put in a forum I subscribed to and happen to notice days ago, then I might have seen it, then, but didn't see it until this afternoon, and the e-mail version of your post only had the scant initial information, not the subsequent question and answer about your OS that you'd replied to on the other forum.  So as you say, I had not read the thread, because it was on a forum I didn't subscribe to.  So be shocked and perhaps awed as is necessary.  My treat.
    Second, I did make a typo when I said Win8/8/8.1 and it should have been Win7/8/8.1, which might have been deduced by the repeated 8, so you could have asked for clarification.
    Seeing as you're on Windows 7 which ACR 8.4 should be compatible with, one minor detail is that I see in the compatible Lightroom 5.4 requirements that it needs Windows 7 Service Pack 1, which would mean you'd want to be caught up on your Windows Updates, which I would assume you'd be.
    There are direct links to ACR 8.4(.1) on Jeff Tranberry's blog that are distinct for PS-CS6 and PS-CC so maybe that is what isn't right?
    Keeping Photoshop Up-To-Date
    You might check what version of PS-CC you have.  14.2.1 is the most current, and maybe that is prerequisite to ACR 8.4.1, I don't know. 
    If worse comes to worse, uninstall everything Adobe, then run the CS Cleaner then re-install CC Desktop and see what happens as you install PS-CC and it's updates.  It may need to be run several times.
    Once you're ready to retry your installs, you also might try to Quit CC Desktop and run it As Administrator in case there is a permissions issue.
    The CS Cleaner can be found, here:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed

    I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed them in the past.  How can I get it to display these photos in Bridge and open them in RAW?

    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
    Benjamin

  • My iPod 4th Generation camera shutter will not open and i've restarted it and I have updated it, what should I do now?

    PLEASE HELP ME! I've had this problem August last year and I don't know what to do. I really want to use my camera because it feels like a 3rd Generation one and I'm used to using the camera:L
    Just please give as much information as possible!
    btw, if you give me info where I have to restart it or update it.. dont bother because i've done that several times and nothing has happened! So please help!
    Much Love

    See this previous discussion. Not a good sign at all
    .camera shutter will not open: Apple Support Communities

Maybe you are looking for

  • Hi please advice on the keyword cleanup founc ina try and entry

    Hiii             TRY .                 lst_ykomv-kbetr = lv_ptemp2dp. *             Catching the exception in case the value is too big to be assign to kbetr               CATCH cx_sy_conversion_overflow INTO cxl_oref.                 lv_text = cxl_o

  • Dynamically pass subject via mail adapter without using mail package

    Hi, We have requirement to pass the Dynamic variable as Mail subject we can't use Mail Package as we need to capture the data from Dynamic SOAP header Data from incomming channel Dynamic SOAP Header variable (XHeaderName1) comming from Sender SOAP ch

  • Cancel payment request

    Dear all, Can anyone please let me know how to to cancel an earlier send and still not executed payment request. srinivas

  • Sliding images

    I have a header for a website that has three buttons on the left and when you click on each one it leads to another image that slides in from the right. I am trying to change some of the code in this because it is from someone that does not currently

  • I CAN ONLY PRINTS EVERY OTHER PAGE - PLEASE HELP ME!

    Please can anyone help me?  I am trying to print from my iMac (running Lion) to my HP1022nw laser printer.  In every application, only every other page prints out.  Within Paper Handling on the print window, I have correctly selected print every page