PS CC 2014 does not start up correctly

hi,
I'm trying to rum PS CC 2014. After starting it stops quickly giving the message "could not initialize Photoshop due to a program error". I tried all not to technical things like reinstalling, logging of, ... Even tried to find the install log but couldn't find it.
Lightroom runs perfect. Had the same problem with PS CC previous version. Did use CS5 because I had no time to solve the problem. Now I m eager to use PS CC but it does not start up.
Anybody?
thanks!

make sure you have no 3rd party plugins starting and reset your preferences by holding down shift-ctrl-alt (win) or shift-cmd-alt (mac) while starting ps. if done correctly, you'll see a confirmation dialog.
if that fails, uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Similar Messages

My Macbook Pro, circa 2007, does not start up correctly. It gets stuck opening Finder. Does this sound like a Hard Drive or other hardware?

Hello. Need a little help. My Mac Book Pro is having start-up issues. I am running Snow Leopard on this computer. It is bootcamped up to run a PC portion as well. I started having this problem a few weeks ago. I tried to back up the drive, but it would not even let me do that. I wiped it clean (I had a relatively new back-up and it is secondary computer) and reinstalled the OS. It worked well for a couple of days, but started getting held up with opening the Finder on start-up and it woudl just get stuck. I am more than willing to pull the drive and install a new hard drive, but that might not be the main issue so I am looking for some assistance before the next wipe out.
When it was working for a couple of days, I tried to install OS X Lion, but it would not allow me to do so (some installation failure).
Anyway, should I retire this computer or install a new harddrive....
Any advice is welcome.
Dan

a brody, I will take a look. The internal drive works (i.e., the battery, it spins, etc.) it just has a bit of trouble recognizing all CD's so I tend to use the external one since it works consistently. Do you still think this might be the issue? The apple store told me a week after my extended warranty ran out that the drive should be replaced but that an external drive is not an isse, but that was a while back and this problem just started.

In Logic Pro or Pro X Meta Events don't work correctly; for example inserting Stop Playback number 52 in a specific position the playhead stops wrongly several ticks before. Then the button play does not start.

In Logic, Pro or Pro X Meta Events don't work correctly; for example inserting Stop Playback number 52 in a specific position the playhead stops wrongly several ticks before. Then the button play does not start.

Curious if what your describing is similar to issue 4 which starts around 9:15 in video...
https://youtu.be/q93jdOhi4Oc
If so this started for me, or at least I noticed it for the first time in LPX 10.1.1. What version of logic are you running?
I've recently found that this issue also affects note timing on instrument tracks that use the "External Instrument" plugin.

Xfce4-power-manager does not start, but after relogin - works

Hi all.
When I login after system start, xfce4-power-manager does not start and systemtray icon doesn't appear. But after relogin (not restart), the systemtray icon of xfce4-power-manager appears and power manager itself works correctly (if I don't relogin, notebook will shutdown after 10 minutes of downtime - that rule doesn't exist in xfce4-power-manager settings).
Diff between two logs (before relogin and after, xfce4-power-manager --debug command)
diff log_1 log_2
35c35,36
< TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 0
> TRACE[xfpm-battery.c:150] xfpm_battery_refresh_visible(): visible=TRUE: ((XfpmShowIcon) SHOW_ICON_WHEN_BATTERY_PRESENT)
> TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 4
51d51
< TRACE[xfpm-polkit.c:238] xfpm_polkit_free_data(): Destroying Polkit data
System
Linux gready 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64 GNU/Linux
systemd 212-3
xfce4-power-manager 1.2.0-6
That bug start happening after one of last week updates. I don't have a package cache.
Can anyone help me?
p.s. sorry for a bad English.

Yes, i'm actually running xfce4 (all other things from xfce4 group are installed).
It starts from a login manager named LightDM.
AcpiD installed as a dependency.
logind.conf
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See logind.conf(5) for details
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#InhibitDelayMaxSec=5
HandlePowerKey=ignore
HandleSuspendKey=ignore
HandleHibernateKey=ignore
HandleLidSwitch=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
#IdleAction=ignore
#IdleActionSec=30min
I turned off key handlers because I truly HATE when I press power button and a notebook doing shutdown after that.
Last edited by theperfectblance (2014-04-17 06:57:32)

Premiere Elements 12 does not start after error message: display driver is incompatible

After successful installation and starting Premiere Elements the following error message appears: "Uncompatible display driver identified. Update the display driver for a better and faster playback performance!" Hopefully my translation from German is helpful enough. I confirmed with OK but unfortunately Premiere Elements does not start. I checked the display driver: it is the most actual one: AMD Radeon HD 7610M. Furthermore the hardware should be OK as well: ASUStek with an Intel Core i5-2450M CPU @2.5 GHz; 6 GB RAM; 64 Bit Windows 7 Service Pack 1. What can I do?

Moonkeys25
Recap...please confirm that as of this date, the problem exists with or without the antivirus and firewall(s) disabled.
Moving forward...
If you issue was specific to the display card error that you have been getting then probable conclusions
a. the ADM Radeon H7610M driver version is not up to date
or
b. the ADM Radeon H7610 M video card/graphics card installed as is is not compatible with Premiere Elements 12 on your Windows 7 SP1 64 bit
The updated driver version and the BadDrivers.txt file deletion should have corrected the problem unless there is a gross mismatch between Premiere Elements 12 and ADM Radeon H7610M.
Did you use the link that John posted to get the auto detection of the latest driver version for the ADM card?
If we have gone as far as we can with the card and its driver version angle on this, then we can try the generalized troubleshooting drills with no guarantees, just hopes
1. Delete the Adobe Premiere Elements Prefs file and, if necessary, the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. You just need to make sure to have the computer's Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
2. If "1" has no effect on the issue...uninstall, ccleaner run through time, reinstall with antivirus and firewalls turned off.
a. Control Panel/Program, select Adobe Premiere Elements 12, right click the entry and click on the Uninstall pop up. Then follow the instructions for the uninstall.
b. Download and install the free ccleaner for a computer run through to get rid of leftovers from incomplete uninstalls and installs.
https://www.piriform.com/ccleaner/download
When you are ready for this step, I will give you a step by step through the ccleaner (regular cleaning part and registry cleaning part).
c. Reinstall from your installation files or installation disc, with antivirus and firewall(s) disabled.
Please review above and then let me know if I have interpreted correctly where we are in the troubleshooting. Do not start the above plan until we are in agreement on the details and hoped for results.
Thanks.
ATR

Zune Software does not start on WIN 8.1 PRO

whenever I need to run ZUNE software to update my phone or just edit my music collection my Zune software does not start. I only get a window alert saying [Windows cannot find 'C:\Program Files\Zune\Zune.exe'. Make sure you typed the name correctly,
and then try again.]
Troubleshoot performed:
-uninstall software, reinstalled with administrative privileges, run the program and does not start, end up with same message. (many, many times)
- Installed it in different directory, installed all windows updates, run program and same symptom
- installed the MUSIC app from windows Store, helps but does not let me edit mysong collections app really is not the appropiate one
-cannot download my photos or videos, please HELP!
*** Is there a way I can download my pics and videos without ZUNE? Is there a FIX IT program for Windows 8 PRO, just in case there might be a problem with registry entries? ***
Machine DELL XPS
Windows 8.1 PRo
Intel Core i7 - 16 GB RAM 64 bit Operating System, x64 based processor

Whaaaaaat...???????
It is not compatible? How do i transfer my music, pictures, videos.??? Cant beleive it..!!
HELP HELP

OracleOraDb10g_home1TNSListener service does not start

I am using Win XP. I have installed Oracle 10g.
OracleOraDb10g_home1TNSListener service does not start. If started manually, it automatically gets stopped.
As result, if I connect to Orcale 10 database through Java, I get Network Adapter error.
what I need to do for OracleOraDb10g_home1TNSListener service to start after clicking 'Start' on it through Services in Control Panel/Admin Tools
Thanks

Oracle installation was successful.
after lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-MAR-2006 23:03
:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle\product\10.2.0\db_1\network\admin\listener.or
a
Log messages written to C:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=uc-52b3c4f41f58.er
c-wireless.uc.edu)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
Listener failed to start. See the error message(s) above...
After correcting Host in listner.ora, listner started. However before making this change, this service was getting started though listener.ora had wrong host name.
Thanks.

Opmn service does not start when try to start Oracle BI Services

Hi ,
I was able to install OBIEE 11g on my laptop and it worked fine for two days. Today when I try to login to rpd and type my user name and password I get the error that my user name and password is not correct. I tried to restart the machine and now I am not able to start opmn service.
When I do Start>Oracle Business Intelligence (1)>Start BI Services, the script run and two command line windows open and about 10 minutes later get the last line that server started in RUNNING mode, but some how Oracle Process Manager (instance) service does not start. It started two days ago when I was able to login to OBIEE 11g.
If I try to go to OBIEE 11g Home page I get this error "Error 500- Internal server error from RFC 2068 Hypertext Transfer Protocol- HTTP/1.1: 10.5.1 500 Internal server error
Any Idea how to fix this one.
Thanks

Maybe you need to tick the "use fully qualified names" check box and make sure that you have the schema object created (as a "folder" between the database and the tables in the physical layer).

Does not start up with last viewed Tabs even though chosen in options?

V 4.01 with Vista. Even after choosing the correct option in options>options>General FF does not start up with the last session of Tabs and Windows. It always opens with a single blank Tab. What am I doing wrong?

Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
If you use CCleaner then make sure that Session is unchecked in the settings for the Firefox application.

Photoshop does not start unless I reboot

I have been having this problem since yesterday. Photoshop does not start after I use the computer for a while. I opened Windows Task manager to see if any processes start at all, even though the application does not start. Two processes (1) AdobeIPCBroker and (2) Photoshop.exe process start, but photoshop application does not open , not does it show up in the applications. What may be going wrong?
Arun

domike wrote:useradd someuser ; mkdir -p /home/someuser ; chown someuser:someuser /home/someuser
Where did you get this idea? This is the problem.
Follow the wiki
Also, you realize everything you are installing and doing only remains in memory. Why are you installing all these packages? Are you going to repeat this installation and user creation at every reboot?
EDIT: something else is wrong too - but until you fix the above, it will be hard to know if it is a separate cause, or an indirect effect. /run/user/0 should not be relevant, but /run/user/1000 should be used. I suspect your method of starting X is logging out of the 'su'ed user and is dropping back to the root login that it is under. You'll likely need to change tty's to log in as your user - on a normal system you could log out of the root session and back in as your user - but on the iso I think autologin for root is set on tty1. Of course you could disable this too.
Last edited by Trilby (2014-05-28 11:44:42)

Photoshop 32bits does not start up anymore on Windows 7 64bits.

This is the situation:
We have 2 PCs that have been configured identically, with the exception of a scanner (canonScan 9950F) attached to the computer and the 32 bits twain scanner driver installed.
Both PCs worked correctly, the one with the scanner attached started 32 bit PhotoShop when there was need to scan. But for some obscure reason, 32 bits Photoshop does not work anymore. I have tried disabling the twain driver (by moving it out of the plugins directory), restarting the machine, updating to the latest software, but despite this, Photoshop does not start anymore... no beep, no crash, no nothing.
I deinstalled Photoshop, Reinstalled - same phenomena.
At least the Event Viewer of Windows has something to tell, even if it is not quite understandable to me:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2011-07-04T15:39:45.000000000Z
EventRecordID
8452
Channel
Application
Computer
pwlu0w977.paulwurth.agn
Security
EventData
Photoshop.exe
12.0.0.0
4bbc56b6
Photoshop.exe
12.0.0.0
4bbc56b6
c0000006
00e8beff
12b4
01cc3a608276fe50
C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe
C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe
d70b772e-a653-11e0-b8c6-6431503f59b8
May be someone out in the user community has a solution? Needless to say, that the second machine works fine!
Lucien.

The Photoshop executable really should be showing 12.0.4.0 as the executable version should have been updated by the updater.
I'm sorry for the really basic question, but did you reboot after installing the 12.0.4 update?
I do vaguely remember a few forum posts claiming the updater had only worked partially, though in my own case it updated all the files no problem. Can you recall whether you changed anything under the Photoshop 32 bit installation area (e.g., did you move or remove any of the Adobe plug-ins, for example)?
If memory serves, the workaround for a "partial update" was to uninstall Photoshop, then reinstall 12.0.0, then update to 12.0.4.
-Noel

Certificate does not contain the correct site name

Hello,
I have to make a midlet that connect to a tomcat 5.5.9 server with ssl.
I import the certificate whit tomcat alias in the wireless toolkit but when i run the midlet this error appear: Certificate does not contain the correct site name
import java.io.*;
import javax.microedition.midlet.*;
import javax.microedition.io.*;
import javax.microedition.lcdui.*;
public class HelloNet extends MIDlet implements CommandListener , Runnable{
// User interface command to exit the current
// application.
private Command exitCommand = new Command("Exit",
Command.EXIT, 2);
// User interface command to issue an HTTP GET
// request.
private Command getCommand = new Command("Get",
Command.SCREEN, 1);
/// The current display object.
private Display display;
// The url to GET from the 'net.
private String url;
* Initialize the MIDlet with a handle to the
* current display.
public HelloNet() {
url = "https://127.0.0.1:8443/Hello.txt";
     display = Display.getDisplay(this);
* This lifecycle method should return immediately
* to keep the dispatcher
* from hanging.
public void startApp() {
     showPrompt();
* Display the main screen.
void showPrompt() {
String s = "Press Get to fetch " + url;
TextBox t = new TextBox("Http Result", s,
s.length(), 0);
t.addCommand(exitCommand);
t.addCommand(getCommand);
t.setCommandListener(this);
     display.setCurrent(t);
* pauseApp signals the thread to stop by clearing
* the thread field.
* If stopped incorrectly, it will be restarted from
* scratch later.
public void pauseApp() {
* destroyApp must cleanup everything. The thread
* is signaled
* to stop and no result is produced.
* @param unconditional is a flag to indicate that
* forced shutdown
* is requested
public void destroyApp(boolean unconditional) {
* commandAction responds to commands
* @param c command to perform
* @param s Screen displayable object
public void commandAction(Command c, Displayable s) {
     if (c == exitCommand) {
     destroyApp(false);
     notifyDestroyed();
     } else if (c == getCommand) {
          Thread th= new Thread (this);
          th.start();
* Read the content of the page.
public void run() {
TextBox t = null;
StringBuffer b = new StringBuffer();
HttpsConnection c = null;
InputStream is = null;
     try {
     int len = 0;
     int ch = 0;
     System.out.println("Cerco di leggere");
c = (HttpsConnection)Connector.open(url);
c.setRequestMethod(HttpsConnection.GET);
     is = c.openInputStream();
// length of content to be read.
len = (int) c.getLength();
if (len != -1) {
// Read exactly Content-Length bytes
for(int i=0; i<len; i++) {
if((ch = is.read()) != -1) {
b.append((char) ch);
} else {
// Read until connection is closed.
while((ch = is.read()) != -1) {
len = is.available();
b.append((char) ch);
t = new TextBox("Https Result", b.toString(),
b.length(), 0);
     } catch (Exception e) {
e.printStackTrace();
String s = e.toString();
if(s != null) {
t = new TextBox("Https Error", s, s.length(),
0);
} finally {
if (is != null) {
     try {
          is.close();
     } catch (Exception ce) { }
if (c != null) {
     try {
          c.close();
     } catch (Exception ce) { }
display.setCurrent(t);
}

re: code tags, please see http://forum.java.sun.com/help.jspa?sec=formatting.
As for the rest:
See, we now know that you used keytool to generate you certificate. You need a new certificate. This time, when keytool asks you for a first and last name, type 127.0.0.1.

Integration Process does not start

Hi guru's
My scenario is this. From ECC we send Idocs to PI. We have an integration process to receive the idocs because only max 9999 are passed in the port.
We run just around 11000 CREMAS idocs now.
The problem is that the integration process does not start on our QA environment while it does start on DEV environment.
I've run many checks on both environments and they all look the same.
To name a few:
* Cache are all green and up-to-date.
* I checked the WF models which are behind the Integration Process and they are the same.
* Event correlation is correct in both environments
* When i test the idocs are correctly sent from ECC to PI.
However on DEV I see in transaction SXMB_MONI_BPE i see that the integration process is triggered and started. It waits 10 minutes and collects any messages that come in, and then bundles these and sends them on to the receiver.
On QA i do not see the Integration Process being started. Only records i see in SXMB_MONI_BPE are three work items, 2 completed, 1 ready, all 3 are called waiting for event.
I'm probably missing some configuration somewhere but what could it be?
Regards
Robert

Hi Eng Swee,
Thx. I checked it already and it works fine.
Meanwhile i did do some changes and some retests and now i saw somewhere that all my tests were creating more steps in an already started integration process, that was still waiting.
I now cleared some old workitems and started afresh.
What i see now is:
1) the BPM process start correctly
2) it receives 1 or 2 or 3 or n messages
3) it then waits for the deadline to finish, i.e. it should run for 10 minutes and then proceed to the next step which is sending the collected idocs to receiver.
On DEV the deadline works fine. On QA it doesn't.
IN SWU3 i have done the customizing and it shows green, so that part is OK.
Still the deadline is passed and it doesn't have the desired effect on mu BPM process (workflow).
Are there any other checks i can do to see if the deadline mechanism is properly working?
Is there a maybe a manual step i can do to trigger the deadline? Then at least i get some information on where the real problem is.
(Sorry for earlier confusion but i hadnt realized that there was still a process running)
Regards
Robert

Not starting up correctly

Computer not starting up correctly since installing Lion. Sometimes it does, sometimes it does not. Seems to stall when it opens Mail. Sometimes it crashes when using Safari.

Jeff..
Use Lion Recovery

HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

PS CC 2014 does not start up correctly

Similar Messages

Maybe you are looking for