PS CC 2014 Slow Layer Switch

I am running PS CC 2014 on a 27 inch iMac. My version of PS is up to date. But I've been having problems with sluggish performance for three to four days.
I try to switch between layers using the shortcuts and it's really slow. Even when I switch to an adjustment layer, the properties tab takes almost a second to load. I even re-installed a clean copy of OS X 10.9.4. But I still have the same issues.
I am totally going insane now. I really hope to fix this issue.
My System :
Processor 3.2 GHz Intel Core i5
Memory 24 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 675MX 1024 MB
Has the current versiona of Photoshop, Lightroom and Bridge.

Here's the thing. I don't have any other extra plugin installed. To eliminate any OS issues, I installed a clean copy and then used photoshop without installing any other softwares. Just my OS X and Photoshop without any modifications.
But still, I have the same problem. The other thing is that, when I use alt +[ or ] to cycle layers, it's slow. If I save the same thing as an action and run the action, I'm able to switch to another layer instantly.

Similar Messages

Packets dropped to Access layer switch???

We have a 6509 running in Native IOS that has 2gb port channels connecting to our 7 access layer switches. About a week ago we were working with Remote span vlans and added a remote span from the 6509 to our other core (6513) which is connected via a 20Gbps portchannel. We began to notice that a lot of people were calling in reporting devices as being slow and we noticed that from the 6509 (Which was the root bridge) we were disgarding millions of packets on the transmit side of our access layer switches. We took out the remote span but it appears that we are still disgarding packets. There are no input or output errors on either side. The Remote span VLAN does not exist on the access layer switch's VLAN database. Does anybody have any idea what we should be looking for?

you can use an acl to match the number of packets that come into / out of each of the devices. Simply use two lines in each acl where on the first line you match the packet in question and on the second line you have "permit ip any any" so you don't block any packets. Then simply apply the acl either inbound or outbound on the interface in question. If you want more than one acl on a given device, such as inbound one interfaceand outbound another, be sure to use two different acl numbers.
create the acl's and apply them
ensure there isn't an active call
clear access-list counters on all devices where you configured the acl's so we ensure all of them are set to 0

Is it recommended to use HSRP or multiple default between Core Layer Switch and Customer Edge Router?

My client is asking me for following
Client is using Router as edge device. 2 WAN links from different service provider ( each 20 Mbps) are getting terminated on the router. There are internal servers present in the network. Client want to make setup such that even if one wan link fails internet users should be able to access web server. Moreover if the edge router fails there should be secondary edge device so that there is device redundancy ?
As per my understanding, in this scenario we need to do static one - to - one natting(belonging to WAN interface subnet). If we use two routers as Customer edge ans if we connect core layer switch to these two router, is it recommended to use HSRP/VRRP/GLBP or two default route on core switch pointing to two routers with equal ad value. we will also track the wan link with help of ip sla.
which is recommended solution Router redundancy protocol or Default routes.?

Just had another read of this post and some other points have come up.
1) I assumed your secondary link was for redundancy but you talk about terminating both SP links on the same router in your first paragraph.
Did you mean this or are you going to be terminating a link per router ?
2) are you using the second router purely for backup ?
3) something you didn't ask about but is relevant is the IP addressing. Are you using provider independent addressing or does each SP provide you with an address block.
If it is the second then you are going to have an issue with the web server. The problem is which provider's IP do you use for the web server ie.
if you use the primary provider IP then that will be the DNS record on the internet. If the primary router fails then the IP address will change on the secondary router but DNS will still be handing out the primary IP.
If you enter both IPs (primary and secondary) into DNS then you would get load balancing but this means both links will be used and the secondary would not just be backup.
In addition if one of the links fails then DNS does not know this so it will still be handing out the failed address as well as the address that is still up which means some connections will work and some won't.
Jon

Creating Vlans at Core layer switches ?

Is there a need to create vlans at core layer switches ? If yes what are the pros and cons for this practice ?
Actually i have seen some networks doing that!

Well this is the topology that i'm working on.
we have implemented the 3 layer approach.
1. At access layer: Switches are all L2 (for sure :) )
2. At distribution layer: All switches are L3 are routes for incoming data.
3. At core we have 2 6500 switches. One is configured as L3 and all vlans are created in it. Second is just as regular L2 device.
and ofcourse there are some switch blocks for server farms and the likes.
My issue is
1. why don't we create vlans at distribution layer switches.
2. Why one core switch is acting as L2 and other is acting as L3. What will happen in case of failure to the one acting as L3.
Ps: the second issue just came up in my mind.

Ios7 Update Problems on iPad 3 - My iPad is not going to black screen after not being touched. Also, am I crazy; I can't find timing adjustment to go to black. Finally, iPad slow to switch between some catgagories in control panel

O.K. I found 3 issues on my iPad 3 after ios update:
1. iPad does not go to black after non-use
2. iPad is slow to switch between some catagories in control panel
3. Speaking of control panel; have I lost my mind? I can't find time adjustment responsible for iPad going to black.

Outside of the contact number for that you've already used I don't know another way of direct contact. Here are some things that they may or may not of had you try that might help you. If you will go to the settings app and pick general on the right-hand side you will see accessibility. Within that you can adjust a text size make the text bowl you can also increase the contrast. You can also adjust the brightness and control panel.
As for Siri again in the settings app under general you should see Siri on the right-hand side with the switch to turn it on. If that is turned on and you're still having issues
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

G5 dual/1.8GHZ slow when switching users and starting mail, opening files

I have 20' imac dual cpu G5/1.8ghz/1gig/250gig drive with 10.4.11.
It is much slower than the G5 it replaced. Symptoms include: very slow when switching to another user desk tops, opening up the hard drive for the first time once you get there, opening entourage or mail for the first time; lots of beach balls.
The drive has more than half the space left, we don't have many applications running, our iphoto and itunes libraries are under 20 gig combined. I ran the disk utility and cleaned up permissions. We typically leave the mac on all the time but restart occasionally.
Any ideas?

We'll let you in because you used to have a G5 iMac , but you really should post on the dual page. Anyway, have you cleaned your caches in the browser you use? You can use OnyX to clean all the caches. Make sure you empty the trash in all your user accounts as well. Try resetting the PRAM too.
Hope some of this helps,

Core layer switches IP address for routing

For routing process I add a IP address of each Vlans subnet that active on each Access and Distribution switches (Have a port with that Vlan on the switch) to the corresponding Vlan Interface of them.
Which IP address should I add to the Core switch for routing?
Should I add a IP of each vlan that in the LAN to each vlan interface of Core layer switch?
I want run OSPF routing protocol on the LAN.

Hello Reza,
>> Which IP address should I add to the Core switch for routing?
if you want to implement a L3 routed core every link betweeen core device and a distribution device is a L3 link with its own IP subnet.
For example if you have 16 distribution pairs and two core switches:
10.10.10.0/30 dis11 to core1
10.10.10.4/30 di12 to core2
10.10.10.8/30 dis21 to core1
10.10.10.12/30 di22 to core2
10.10.10.128/30 disF1 to core1
10.10.10.132/30 disF2 to core2
this under the idea to have not a full mesh between core routers and distribution devices
then you need also a L3 link between the two cores (at least one)
Each L3 device should also have a loopback interface to be used as OSPF router-id and for management purposes (telnet and so on)
you can use /32 loopbacks taken from same block for example
10.255.254.1/32 core1
10.255.254.2/32 core2
10.255.254.3/32 dis11
10.255.254.4/32 dis12
to make the routing function the core switches have to talk OSPF on all links to distribution nodes
router ospf 10
router-id 10.255.254.1
network 10.10.10.0 0.0.0.255 area 0
network 10.255.254.1 0.0.0.0 area 0
network area commands work like ACL statements and first statement starts OSPF on each interface whose ip address belongs to 10.10.10/24 space
Second command is used to advertise its own loopback.
router-id command allows to define the OSPF router-id.
Distribution nodes have to advertise client Vlans and to take part in OSPF communication on point to point link.
if you use a L2 access layer design client vlans are served by distribution nodes.
if you use a L3 access layer design the access layer switches take part in OSPF and have to advertise their own client vlans.
Hope to help
Giuseppe

Mac working too slow when switch to one to another user acconut

Mac working too slow when switch to one to another user acconut...
it means when working on one user acconut and i switch to another account its take too much loading + slower than 10.8
solve it..
Thanks

iTunes will naturally stop playing since it acknowledges that you're not actively using your current account.

MSTP on Access Layer Switches

Hello everyone,
When configuring MST for STP, is there a need to configure it on access layer switches in a collapsed core design? I can find docs to configure the root and secondary root bridges but I don't see anything about configuring access layer switches. In RSTP, you configure it on all switches cooperating in STP and set the root and secondary bridges accordingly. Any help is appreciated.
Regards,
Terence

Hi,
You should configure your access switches for MST as well so you are using the same STP for core and access. The only difference between the core and access is that the core is root and back up root for STP and the access layer is just default (32768).
HTH

Why access switch has flapping lead another distribution layer switch has root guard blocking and unblocking log

is it misconfiguration in Access Point's access switch or hacker attack from this switch?
many MATM-4-MACFLAP_NOTIF Host 0015.5dc1XXX VLAN 1 is flapping between port 1 and port 2
many MATM-4-MACFLAP_NOTIF Host 0015.5dc2XXX VLAN 1 is flapping between port 1 and port 2
many MATM-4-MACFLAP_NOTIF Host 0015.5dc3XXX VLAN 50 is flapping between port 1 and port 2
many MATM-4-MACFLAP_NOTIF Host 0015.5dc4XXX VLAN 50 is flapping between port 1 and port 2
last time we do not have these switch also meet the same issue about distribution layer switch have many ports down
last time someone mention a switch lost config, but today, i remember that the switch has reloaded and can be login again with radius,
today i do not connect any notebook with this switch and just have configured radius setting for window NPS radius server and then reload, then
i have dinner and come back and after a while, last time's issue happen again.
it seems port channel easy to have problem when abnormal traffic coming from access switch result in down port in distribution layer switch
i wonder whether someone can hack through the switchport access mode port and send some broadcast message

From that output and your description it looks like you have an STP issue as a result of misconfiguration somewhere.
Are your access points connected to switches with ports in access mode or trunk mode?

Multi-Layer switching & cef

Does anybody have some usefull links or information regarding CEF/Multi-layer switching? How are these features interacting with each other? Key differences?
Thank's a lot.
Florian

Hi Florian,
Basically in MLS the first packet to reach the destination rill need to be processed by router as it just maintain the caches and so for second packet it gets wr writed in hardware.
But in CEF even the first packet is hardware switches as it builds the adjacency table and FIB table. Which not only maintains the routing entried but also the arp entried like binding the mac with ip so that even first packet can be hardware switches.
Have a look at this white paper for CEF
http://www.cisco.com/warp/public/cc/pd/iosw/iore/tech/cef_wp.htm
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/12_1e/swconfig/mls.htm
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/12_1e/swconfig/cef.htm#
HTH
Ankur

PS CC (since JAN 2014 update) Layer-mask editing causes hangs/crashes

ONLY since JAN 2014 update, PS CC has been hanging/crashing when I paint/edit a layer mask. All may be well at first (or not), but suddenly the display of the mask (or mask overlay on the layer itself, as shown when hitting backslash key) is not shown in full but renders in s-l-o-w-l-y in rectilinear pieces <snapshot below was taken before video card upgraded but is still typical of what I mean>. When I view Windows' Task Manager for PS, I see my CPUs are each working at their upper limits (up to 80+-90+%), varying only by a few points, over a VERY long time... which could be MANY minutes. OR the System has decided PS is Not Responding.
In any case, whenever this happens, it means in all practicality PS CC is not working, so I either kill it or it's crashed.
Now, here's the thing: that VERY file, can immediately be opened in PS CS6 (which I have fortunately kept installed on my computer), and the mask will be as I thought it should be, and I can edit it as I always could, just fine! So it's obviously a PS CC thing, and I do NOT recall this happening prior to the JAN update. It is still a problem after the two subsequent updates.
I have not been able to determine the specific instances when this happens, as it seems to happen whenever I am editing a mask, no matter what size/softness/color brush, what magnification, what view mode, many or few layers, big or small file, etc.
I did upgrade my NVIDIA card (from GeForce GTX 260 [with current driver] to GTX660), just in case it was a factor (maybe kept it from crashing as fast? hard to tell... but it's still an unworkable problem). You can see from my Sys Info shown here from the PS CC Help menu that it should be more than sufficient for any PS CC task, and it's running the latest driver:
Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2664 MHz
Built-in memory: 16379 MB
Free memory: 12453 MB
Memory available to Photoshop: 14697 MB
Memory used by Photoshop: 60 %
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1200, right=1920
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=2048
gpu[0].RectTextureSize=16384
gpu[0].Renderer="GeForce GTX 660/PCIe/SSE2"
gpu[0].RendererID=4544
gpu[0].Vendor="NVIDIA Corporation"
gpu[0].VendorID=4318
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="9.18.13.3221"
gpu[0].Driver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
gpu[0].DriverDate="20131219000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLPresent=1
gpu[0].OCLVersion="1.1"
gpu[0].CUDASupported=1
gpu[0].CUDAVersion="6.0.1"
gpu[0].OCLBandwidth=1.16816e+011
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.40 NVIDIA via Cg compiler"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[16384]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[2048]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]
I work on digital-photography files, and use a layer mask in almost every file, so this relatively-recent bug is a big PITA, having to switch back and forth between CS6 and CC!
Until there's a fix... is there a way to roll-back my PS CC version to BEFORE the JAN 15, 2014 update?

I am not qualified to comment on technical issues; I'm just a user whose son in IT is my 'technical support department.' (But he's not much of a PS user.)
I'm pretty sure, however, that all my Prefs were set to the same things BEFORE the Jan 16, 2014 PS CC update as after (unless the update itself changed something I was unaware of... the settings APPEARED to be the same but I can't easily locate my notes of what my Prefs were from long ago).
And they were the same as the PS CS6 I have had installed on this same system for a very long time, with older video card with older driver, with newer driver; newer video card with newest driver, etc. Yet after that CC update, CC has not (until this workaround) worked re 'the masking bug' for me, yet CS6 has always worked just the same.
So I conclude that the only variable (other than the video card upgrade I did in an attempt to solve this and of course those Windows auto-updates) in this scenario IS something to do with PS *CC*, and after Jan 16, 2014.
As for restarting the machine vs. restarting PS, well, PS is the major player of my system, so when I shut that (and LR) down, I might as well 'clean things up' by Restarting. BTW, I am in the habit of closing and reopening PS (CC or CS6) whenever I finish with a file and load another, in order to get back some of that memory which PS never seems to want to let go. (This is not new to the latest versions, I think. My son says it's a 'memory hog'? ;-) ) I track its memory use in Windows' Task Manager and find that seems to let it 'refresh' itself. (See, I told you I'm not a technical person. ;-) ) But I do not think this has anything to do with the bug. Just a quirk of PS. Like when a tool goes all wonky (for example, its little icon becomes just a 'plus' sign even though the tool is still performing correctly, it's telling me, I think, that it would like to be restarted. And that makes it feel all better... I mean, tool icon reappears.)
Anyway... it's up to Adobe to figure out IF and what may be wrong with PS CC -- it still doesn't work for me as I had it configured at first, and I think it should, right? -- and to fix that... PLEASE. SOON.

Photoshop CC 2014 skew layer action issue

Hello,
I have a set of actions from previous version of PSD (CS6 > CC) which includes skewing a layer and placing it in an exact position. Worked like a charm.
Now, I have upgraded to CC 2014 and these actions are useless...
E.g. - what one action did in previous versions of PSD:
two documents open in PSD:
1) take open document > flatten > image size to width 1000px keep ascpect ratio > select all > Ctrl+C
2) select previous documet > paste > move > free transform including skew
Result in previous versions of PSD was exactly the same. In PSD CC 2014 the skew is different (incorrect) and the placement of the transformed layer is wrong.
Tried to create the same action in the new PSD CC 2014 and the result was the same. Even more - the new transformed layer is placed as if chaotically depending on the zoom of the document it transformed in.
Any suggestions, please? I am quite desperate - I need to process large numbers of files this way...
THANKS VERY MUCH IN ADVANCE FOR ANY HELP
Tom
Correct result from previous versions of PSD:
Error result in PSD CC 2014:

If your are replacing the wall image with image files that are the same size an resolution. Have you tried placing the image in the PSD file as a smart object layer, Then record the action to use replace smart object layer content. Rather then pasting in a new image layer and transforming the new layer. Since the problem you seem to have is the transform step is not working correctly. Recording transform steps can also be tricky. You need to have set Photoshop's ruler units so the step is recorded the way it need to be. Transforms can be recorded using absolut pixel values, relitive to document size in percentages and in relative units like inches which depends on the document DPI resolutio. If it is a CC 2014 bug you should report using this link Photoshop Family Customer Community

Why does CC 2014 slow down my system

Huge Fan. Serious problem. Brand new 1 Terabyte Hard Drive in my MBP. 2 Gigs of RAM
So loaded all my software into the computer, which has been working fabulous for years. Had CC 2013 for all our Adobe products. When loading the new suite with CC 2014 --- now Illustrator takes 5 minutes to open a 3mg Business card file. 3 minutes to save it as a PDF or AI file. PLEASE... someone tell me if I can get the old CC 2013 suite instead of this one?
I have looked for the Adobe Driver, as various discussions seem to indicate that this is an issue, yet I cannot see a folder by this name nor does it show up in my library folder.
Thoughts?
Does anyone from Adobe read this?

Threads a while back suggested that Word 2004 could run slow on Intels because it was not universal and used Rosetta. 512 memory, standard intel mac mini issue at first, was often problematic you needed at least 1gb which they now ship with. Maybe having not one but two applications open within Word is still causing the problem. But the G4 I find harder to understand: at any rate my own Word 2004 works fine on this G4 macmini (and on an old G3 iBook). Though I only use Word not Excel.
I bought this G4 secondhand on eBay because I knew from threads in the forum about problems with Word that the early intels were having so I didn't go for a new machine. I gather that the next Word for Mac which will be universal is due out early in the New Year, having first been forecast for 2007.

Ipad slow to switch on

Hi
The last couple of days I've noticed that my ipad is getting slower when I switch it on stays on the apple logo longer than it has done before what can be wrong withit and how o I fix it

Try another reset of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

PS CC 2014 Slow Layer Switch

Similar Messages

Maybe you are looking for