PS cc Output module not loading

i have downloaded it twice and still isn't working can anyone advise?

Have you read through the help doc http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html

Similar Messages

Error When Publishing "no access to internet (internet module not loaded)"

When publishing a site in GoLive 9 I get the message""no access to internet (internet module not loaded)".
i've never had this problem before, this just started happening and cant figure out how to get it to work again. it's weird because i can connect to my ftp server from the file menu and the internet module is checked on in my preferences. i've tried creating a new site file for my webpages and reinstalling GoLive and nothing has worked.
has anybody had the same problem? thx!

ha, ok i just figured it out. i didn't have the proper ftp setting in the publish preferences. i hadn't changed the info in the "server name" from the place holder text that was automatically inserted. that's a strange error message to display for that!!!

[SOLVED] Modules not loaded after upgrade linux (3.9.5-1 - 3.11.6)

Hi. After upgrading the package linux from 3.9.5-1 to 3.11.6,
many modules such as wifi or psmouse are not loaded.
My PC is Asus Zenbook UX31E.
If I do by hand like
# modprobe ath9k
# modprobe psmouse
wifi and psmouse are OK,
but I want to set all necessary modules auto loaded.
* Output of lsmod of linux 3.9.5-1 was 87 rows
but lsmod of 3.11.6 (I attache below) is only 39 rows.
* Both
/etc/modprobe.d/
/etc/modules-load.d/
are empty on 3.9.5-1 and 3.11.6.
Please give me advice, thx.
Last edited by taro (2014-01-08 11:20:46)

Thx. The version numbers seem to be identical.
% uname -a [~]
Linux tenryu 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64 GNU/Linux
% pacman -Qi linux [~]
Name : linux
Version : 3.11.6-1
Description : The Linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.11.6
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 64493.00 KiB
Packager : Thomas Bächler <[email protected]>
Build Date : Sat 19 Oct 2013 06:25:12 AM JST
Install Date : Fri 08 Nov 2013 12:06:17 PM JST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : None
best regards.

Bridge CC Output Module not working for me

I have installed the Output Module in Bridge CC (Which I can't believ was not included and that it is not an auto update as I thought was one of the big positives of this whole CC concept) but while it opens and looks ok, when I try to create and save a pdf contact scheet, I get a message saying "The file or folder does not exist." and nothing is created or saved. What gives? This is a major feature of Bridge to me as I use it a lot.
By the way, the web gallery does not work at all, either.

Have you read through the help doc http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html

Modules not loading in Flex 4

Hi All,
I have migrated my application from Flex 3 to Flex 4. My application has 3 different modules. The modules are not loading when I run my application with Flex 4. Please help me in this respect.
Thanks in advance,
Nirmal Kumar Bhogadi

Hi Nirmal,
Right click on the project and go in Properties. On the left bar, go in the Flex Modules tab and check if your modules are present there.
If not, browse your modules from the project and add them one by one.
Regards
Monika

[Solved]Virtualbox kernel module not loaded

I update my system today and when I try to run Virtualbox...
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (3.6.11-1-ARCH) or it failed to
load. Please reinstall the kernel module virtualbox-host-modules or
if you don't use our stock kernel compile the modules with
sudo dkms autoinstall
You will not be able to start VMs until this problem is fixed.
I already had this trouble before and this was the fix
# modprobe vboxdrv
But it doesn't work anymore
Any ideas?
Edit: This just get fixed by itself when restaring my PC. Sorry
Last edited by ilq (2013-02-13 02:32:43)

fsckd wrote:
rc.conf is part of the deprecated init system. icebox is not using systemd and neglected to mention that.
Amarildo, see the wiki.
Thanks, it really helped. It's solved.

Output Module Not Working - Limited Options

After upgrading to After Effects CC I am facing problems when using output modules in the render queue.
I can use one of my Output Module presets as a starting point but when I try to change the settings, it only shows a limited number of options. For example, If I choose a H.264 preset and try to adjust the settings, it changes to show me the options for an AVI and the dropdown list only shows a limited range of options. (see below image)
This is annoying, I can't even change the data rate or audio options of a preset.
Has anyone else experienced this issue?
Thanks
Aidan

Rendering h.264 from the output module will work like it did before. The problem with using the Output module is that h.264 movies will just not look very good when compared to movies rendered with the Adobe Media Encoder with the same data rate. Sure you can jack up the data rate and get better looking movies, but all GOP compressed (mpeg) formats require multi pass processing to reduce motion and color artifacts at data rates suitable for distribution. That is why you are better off rendering highly compressed video using the Adobe Media Encoder.
The only time you don't want to render a composition directly in the AME is when you are using GPU accelerated Ray-traced rendering for things like extruded text. In that case you should use the Render Cue to render to a lossless or nearly lossless production codec so AE will take advantage of the GPU, but here again, there is a catch. You must have a compatible NVIDIA graphics card to effectively use this new feature.
Personally I have never understood the desire to use the Output Module for h.264. It's slower and produces less quality than the AME.

Usbser_edge module not loaded, lots of undefined symbols

Greetings folks,
I've just recently more or less completed my Solaris 10 (sparc) jumpstart image and have noticed that upon booting the system will warn about undefined symbols for the usbser_edge module. I've been hunting around and I can't seem to find out where this module is specified to be loaded. The machine in question is a 220R, and I'd like to figure out how to not load this module so the warnings will go away:
Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf0'
Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf1'
Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf2'
Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_free_log_hdl'
Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_alloc_log_hdl'
Sep 9 09:33:25 jump-test krtld: [ID 472681 kern.notice] WARNING: mod_load: cannot load module 'usbser'
Sep 9 09:33:25 jump-test krtld: [ID 749970 kern.notice] WARNING: usbser:
Sep 9 09:33:25 jump-test krtld: [ID 225575 kern.notice] unable to resolve dependency, module 'misc/usba' not found
Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_lookup_ep_data'
Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_parse_data'
Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf0'
Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf2'
Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_ctrl_xfer_wait'
Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usbser_close'
Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usbser_power'
Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_sync_ctrl_xfer'
Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_alloc_intr_req'
Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usbser_getinfo'
Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_close'
Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_unregister_event_cbs'
Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_reset'
Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_bulk_xfer'
Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_free_bulk_req'
Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_register_event_cbs'
Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_free_intr_req'
Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_free_log_hdl'
Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_stop_intr_polling'
Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_attach'
Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_detach'
Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_get_dev_data'
Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_open'
Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_alloc_log_hdl'
Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_rsrv'
Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_wsrv'
Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_wput'
Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_open'
Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_check_same_device'
Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_intr_xfer'
Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_create_pm_components'
Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_free_descr_tree'
Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_set_device_pwrlvl0'
Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_set_device_pwrlvl1'
Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_set_device_pwrlvl2'
Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_set_device_pwrlvl3'
Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_get_max_bulk_transfer_size'
Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usbser_soft_state_size'
Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_alloc_bulk_req'
Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_handle_remote_wakeup'
Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_client_attach'
Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_client_detach'
Sep 9 09:33:28 jump-test krtld: [ID 472681 kern.notice] WARNING: mod_load: cannot load module 'usbser_edge'
Sep 9 09:33:28 jump-test krtld: [ID 749970 kern.notice] WARNING: usbser_edge:
Sep 9 09:33:28 jump-test krtld: [ID 225575 kern.notice] unable to resolve dependency, module 'misc/usba' not found
Thanks in advance for any advice anyone can provide.
pb

I just attempted a generic search at Sunsolve, for "usbser_edge".
It produced references to a lot of documents available after contract login to the site.
If you have a Spectrum login account, get to BugID 4703982.
It's from 2003 or so...
but it discusses the SUNWuedg package being incorrectly installed,
on beta versions of Sol-10, to an E250 and to a SB1000.
Other search result references to various BugID's also happened to discuss
removing references to the driver in the /etc/name_to_major file
as well as in the /etc/driver_aliases file.
See BugID 4790469 or BugID 5045102
I don't trust my skill level with mucking around with such files, however.
If you have contract coverage for the OS or for that system, open a support case.
If not, then see if the SUNWuedg package is installed and remove it.
Then a reconfiguration reboot may be in order.
What the heck, try a reconfiguration reboot just for grins and giggles.
... just my two cents, at least.

Control surface modules not loading correctly at startup

Getting a series of errors on application startup -
"Could not load Module "CS-32" (-43)
and microKONTROL
and TranzPort
and US-2400
These are all Control Surface - none of which I use and I'm stumnped once again. How do I make this go away?

Check this thread:
http://discussions.info.apple.com/webx?128@@.68b982bb

Wacom Intuos Pro aka Intuos 5 kernel module not loading

Just got one of these and kernel module is not loading under kernel 3.11.2-1-ARCH.
% lsusb | grep -i wacom
Bus 004 Device 003: ID 056a:0315 Wacom Co., Ltd
% grep -i wacom /proc/bus/input/devices
% xsetwacom --list devices
% pacman -Qqs wacom
libwacom
wacom-drivers
wacom-udev
wacom-utility
xf86-input-wacom
Any thoughts?

hexadecagram wrote:Just got one of these and kernel module is not loading under kernel 3.11.2-1-ARCH.
Are you sure it should work? If you check linuxwacom-announce mailing list, you will see that for your device (Intuos Pro):
- X11 support is added by xf86-input-wacom 0.23.0
- configuration support is added in libwacom 0.8
- kernel support is added in input-wacom 0.19 but isn't in mainline kernel yet - on 28'th Spet Jason said: "We don't yet have support for the new "Intuos" line, but we expect our next release in six weeks' time to include it."
I'd say you have to wait for newer kernel, or try installing input-wacom on your own risk (different thing from xf86-input-wacom). Patch for mainline kernel reached Dmitry Torokhov's input tree - but isn't merged with official kernel yet, even 3.12rc5 still does not have those patches.

Flex 3 Module not loading - 1 of 32???

I have 1 Module out of 32 that will not load? Months ago, some PCs who did not have the Flex Framework already downloaded would fail, so I put the framework in the root folder and they worked. Today, I did a simple update to the code and it is back to not running again. The module in question was developed exactly as the other 31. In my development environment, where much code has changed, including the main app - it loads just fine. It is like the main application does not even try to load the module, as the 1st real action is to turn on the wait cursor which I never see. Any and all advice and/or guidance is appreciated.
Thanks

Use a network monitor and see if the module is requested.

Parallel port printer modules not loading autmatically

According to the wiki entry for CUPS, either the kernel or or a small configuration file in /etc/modules-load (not /etc/modules-load.d) is supposed to automatically load these modules on boot. When I run lsmod I'm finding none of the printer modules (lp, parport, parport_pc) are getting loaded even though the printer is attached and powered up. Any idea why these modules are not loading? They load perfectly well manually with the modprobe command.
As the wiki specifies, I do have a configuration file in place at /etc/modules-load/printing.conf with the following contents:
lp
parport
parport_pc

Commenting out the INSTALL lines in modprobe.conf worked perfectly.
Before that i tried the stock kernel form current and am now using the one from testing. Neither worked with sound while the INSTALL lines were ther.
What changed?

IPMI kernel modules not loading - no ipmi device

My HP ML110 G5 has a IPMI device that worked but somewhen (I can't say when) it stopped working.
Proof that they exist in th machine with dmidecode:
Handle 0x0025, DMI type 38, 18 bytes
IPMI Device Information
Interface Type: KCS (Keyboard Control Style)
Specification Version: 2.0
I2C Slave Address: 0x10
NV Storage Device: Not Present
Base Address: 0x0000000000000CA2 (I/O)
Register Spacing: Successive Byte Boundaries
I quite soon found out that the ipmi kernel modules are not loaded so I tried to load them with modprobe:
modprobe ipmi_msghandler
modprobe ipmi_devintf
modprobe ipmi_si
no error, no response, no modules loaded (check with lsmod).
There are descriptions (http://en.onoclea.com/bits/hp-microserver-remote-access-card-ipmi-on-linux.html, http://wiki.adamsweet.org/doku.php?id=ipmi_on_linux) how to load the ipmi_si module with manual parameters. Tried, no error, no response, no modules loaded (check with lsmod).

Zancarius wrote:
Sounds to me like the firmware for whatever reason isn't being installed in the appropriate location.
I checked out the PKGBUILD for b43-firmware (which I'm assuming is what you installed), and it appears to be using b43-fwcutter presumably to snag the appropriate files and place them in /usr/lib/firmware:
# Application
b43-fwcutter -w ""${pkgdir}"/usr/lib/firmware/" linux/wl_apsta.o
Does the PKGBUILD generate any errors? Did you check /usr/lib/firmware for the firmware for your wireless? Worst case, you could probably try running b43-fwcutter manually and see what it does. Maybe it has some verbose/debug option you could use, too.
The firmware is installed to the correct directory and the PKGBUILD doesn't generate any errors. I've tried b43-fwcutter manually as well to no avail. Even if that were the case though it doesn't explain why the new kernel also rejects the usbnet, ath9k, and b44 modules. Basically I'm stuck on this old(ish) kernel until this is fixed if I want any sort of network connectivity.
Xyne wrote:This is a long shot, but if you have a separate boot partition, check that it is actually mounted. If not, backup/remove the contents /boot, mount the partition and rebuild the kernel image
I do not have a separate boot partition on this machine. And the mtime of the initramfs images is certainly current.
Last edited by airencracken (2012-07-22 17:41:56)

Module not loading at startup + logs

I am having a problem getting my rtl8187 module to load at startup. This is my wireless driver. At startup my wireless refuses to work. I check my modules "lsmod" and the rtl8187 module appears to be loaded. However my wireless only starts working after I remove the module and then reload it.
Can somebody tell me where I can find the log that will tell me whats going on with this module at startup.
BFC

Can somebody tell me where I can find the log that will tell me whats going on with this module at startup.
You say the module gets loaded, as does lsmod. So there will be no error message, as the system thinks the module is working(which it probably is). The reason your wireless is not working may be another issue. In order for some things to work correctly certain things need be loaded before other things can access them.
anyway, all error logs are in /var/log, shouldn't take you long to look through them. They are dated.

Modules not loading even though they're present in filesystem

Last night I did a pacman -Syu on my laptop. It went well, no errors.
This morning I boot up my laptop and now some modules aren't being loaded at boot, nor are they loading with modprobe (even with an argument to the full path of the module).
packages upgraded:
asciidoc
coreutils (8.17-1 -> 8.17-3)
elfutils (0.153-1 -> 0.154-1)
firefox
glibmm
gpm
grep
imagemagick
kbd
libpulse
linux (3.4.4-3 -> 3.4.5-1)
linux-headers
lirc-utils
pyqt-common
pyqt
python2-pyqt
skype
thunderbird
virtualbox-modules
vlc
wine
xmlrpc-c
Kernel version:
3.4.5-1-ARCH
/var/log/boot:
Loading User-specified Modules
ERROR: could not insert 'b43': Invalid argument
ERROR: could not insert 'usbnet': Invalid argument
Oddly enough, my eth0 device also isn't showing up (in ifconfig -a or in ls /sys/class/net) either.
lspci -v:
08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev02)
Subsystem: Dell Device 022a
Flags: bus master, fast devsel, latency 64, IRQ 10
Memory at c0300000 (32-bit, non-prefectchable) [size=8K]
Capabilities: [40] Power Management version 2
modprobe:
modprobe b43
ERROR: could not insert 'b43': Invalid argument
modprobe -d /usr/lib/modules/3.4.5-1-ARCH/extramodules/drivers/net/wireless/b43/ b43
The second call to modprobe doesn't output any errors, but my wireless interface still won't come up and the module isn't listed in lsmod.
Reinstalling linux, linux-headers, and mkinitcpio and then regenerating the initramfs didn't help either.
I have a usb dongle for wireless as well (TP-Link TL-WN722N) that uses ath9k, but modprobe doesn't want to load ath9k either. I have compat drivers from the AUR installed, but I can't see why that would bork eth0.
edit:
Well just tried to modprobe b44 and that errors out as well, I thought that might be the reason ethernet wasn't working and I think I may be on the right track.
I'm used to problems with this crappy wireless card but I've never had eth0 bork on me on this particular machine. I'm a bit stumped and I'm sure I've missed something.
Anyone have an idea?
edit:
Well, for now I just downgraded the kernel and that's gotten me back ethernet. It looks like a new kernel is in the repos now, so I'm going to try another pacman -Syu. If that fixes it I'm betting it was a packaging issue.
Last edited by airencracken (2012-07-21 19:14:51)

Zancarius wrote:
Sounds to me like the firmware for whatever reason isn't being installed in the appropriate location.
I checked out the PKGBUILD for b43-firmware (which I'm assuming is what you installed), and it appears to be using b43-fwcutter presumably to snag the appropriate files and place them in /usr/lib/firmware:
# Application
b43-fwcutter -w ""${pkgdir}"/usr/lib/firmware/" linux/wl_apsta.o
Does the PKGBUILD generate any errors? Did you check /usr/lib/firmware for the firmware for your wireless? Worst case, you could probably try running b43-fwcutter manually and see what it does. Maybe it has some verbose/debug option you could use, too.
The firmware is installed to the correct directory and the PKGBUILD doesn't generate any errors. I've tried b43-fwcutter manually as well to no avail. Even if that were the case though it doesn't explain why the new kernel also rejects the usbnet, ath9k, and b44 modules. Basically I'm stuck on this old(ish) kernel until this is fixed if I want any sort of network connectivity.
Xyne wrote:This is a long shot, but if you have a separate boot partition, check that it is actually mounted. If not, backup/remove the contents /boot, mount the partition and rebuild the kernel image
I do not have a separate boot partition on this machine. And the mtime of the initramfs images is certainly current.
Last edited by airencracken (2012-07-22 17:41:56)

PS cc Output module not loading

Similar Messages

Maybe you are looking for