PS CC running extremely slow... No issues with CS6...

Same system... CS6 runs perfectly fine, close it, then load CC, not even workable. Close CC and reload CS6 and it runs fine...
Is CC really that much more hardware dependent? I feel like the issue is software related and has nothing to do with my machine... My Machine isn't some kind of powerhouse, but it does have 8gb of ram, and again, no real issues with CS6...

I am having this same problem and can't figure out what is going on. CS6 runs excellent, CC is unbearable. two second delay on almost everything. It is unusable.
Windows machine:
-Windows 8
-Intel i7 970 3.2GHz with HyperThreading
-Solid State main drive (C drive)
-12GB RAM
Any suggestions?

Similar Messages

Machine running extremely slow

I am noticing my machine is running extremely slow. Even with out any Apps open my system memory is only at around 30% so not sure where the band width hog is? Looking at the activity monitor there are allot of things going on / most of which I do not know what they are.
I just ran an EtreCheck - does anyone here know of a way I can stream line my system to run faster and not chock so much?
Thanks
> j
EtreCheck Report:
EtreCheck version: 1.9.15 (52)
Report generated September 27, 2014 at 12:04:09 PM EDT
Hardware Information: ?
    MacBook Pro (17-inch, Mid 2009) (Verified)
    MacBook Pro - model: MacBookPro5,2
    1 2.8 GHz Intel Core 2 Duo CPU: 2 cores
    8 GB RAM
Video Information: ?
    NVIDIA GeForce 9400M - VRAM: 256 MB
        Color LCD 1920 x 1200
        AL2016W 1680 x 1050 @ 60 Hz
    NVIDIA GeForce 9600M GT - VRAM: 512 MB
System Software: ?
    OS X 10.9.5 (13F34) - Uptime: 0 days 0:52:17
Disk Information: ?
    Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted>: 209.7 MB
        Macintosh HD (disk0s2) / [Startup]: 499.25 GB (93.33 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    MATSHITADVD-R   UJ-868
USB Information: ?
    Apple Inc. Built-in iSight
    Apple, Inc. Keyboard Hub
        Apple, Inc Apple Keyboard
    LGE Nexus 5
    Apple, Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Firewire Information: ?
    Seagate GoFlex Desk Mac 800mbit - 800mbit max
        S.M.A.R.T. Status: Verified
        EFI (disk2s1) <not mounted>: 209.7 MB
        Backup Disk 2 (SuperDuper) (disk2s2) /Volumes/Backup Disk 2 (SuperDuper): 2 TB (1.62 TB free)
    Seagate GoFlex Desk Mac 800mbit - 800mbit max
        S.M.A.R.T. Status: Verified
        EFI (disk1s1) <not mounted>: 209.7 MB
        Backup Disk 1 (Time Machine) (disk1s2) /Volumes/Backup Disk 1 (Time Machine): 2 TB (1.47 TB free)
Configuration files: ?
    /etc/sysctl.conf - Exists
Gatekeeper: ?
    Mac App Store and identified developers
Kernel Extensions: ?
    [loaded]    com.seagate.driver.PowSecDriverCore (5.1.1) Support
    [not loaded]    com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
    [loaded]    com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
    [not loaded]    com.seagate.driver.SeagateDriveIcons (5.1.1) Support
Startup Items: ?
    ColdFusion8: Path: /Library/StartupItems/ColdFusion8
    ColdFusion9: Path: /Library/StartupItems/ColdFusion9
    IPSecuritasDaemon: Path: /Library/StartupItems/IPSecuritasDaemon
    MySQLCOM: Path: /Library/StartupItems/MySQLCOM
Launch Daemons: ?
    [loaded]    com.adobe.fpsaud.plist Support
    [loaded]    com.adobe.SwitchBoard.plist Support
    [invalid]    com.oracle.java.Helper-Tool.plist
    [failed]    com.vmware.launchd.vmware.plist Support
Launch Agents: ?
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [running]    com.adobe.AdobeCreativeCloud.plist Support
    [loaded]    com.adobe.CS4ServiceManager.plist Support
    [loaded]    com.adobe.CS5ServiceManager.plist Support
    [running]    com.brother.LOGINserver.plist Support
    [invalid]    com.oracle.java.Java-Updater.plist
    [running]    com.seagate.SeagateStorageGauge.plist Support
User Launch Agents: ?
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [not loaded]    com.adobe.ARM.[...].plist Support
    [not loaded]    com.akamai.client.plist Support
    [not loaded]    [email protected]
    [not loaded]    com.google.keystone.agent.plist Support
    [not loaded]    com.shirtpocket.backupbytime.plist Support
User Login Items: ?
    FontAgent Activator
    Dropbox
Internet Plug-ins: ?
    LogMeInSafari64: Version: 1.0.496 Support
    Google Earth Web Plug-in: Version: 6.0 Support
    Default Browser: Version: 537 - SDK 10.9
    Flip4Mac WMV Plugin: Version: 2.2.1.11 Support
    RealPlayer Plugin: Version: Unknown
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
    FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
    AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
    LogMeIn: Version: 1.0.496 Support
    Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
    AmazonMP3DownloaderPlugin: Version: Unknown
    iPhotoPhotocast: Version: 7.0
    LogMeInSafari32: Version: 1.0.496 Support
    AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins: ?
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
    Flash Player Support
    FAPPreferences Support
    MultiBrowser Support
    MySQL Support
Time Machine: ?
    Skip System Files: NO
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 464.96 GB Disk used: 378.04 GB
    Destinations:
        Backup Disk 1 (Time Machine) [Local] (Last used)
        Total size: 2 TB
        Total number of backups: 82
        Oldest backup: 2013-10-31 21:32:48 +0000
        Last backup: 2014-09-21 19:05:03 +0000
        Size of backup disk: Excellent
            Backup size 2 TB > (Disk size 464.96 GB X 3)
    Time Machine details may not be accurate.
    All volumes being backed up may not be listed.
Top Processes by CPU: ?
        13%    mtmfs
         8%    firefox
         5%    WindowServer
         3%    backupd
         3%    Creative Cloud
Top Processes by Memory: ?
    526 MB    mds_stores
    434 MB    firefox
    254 MB    com.apple.IconServicesAgent
    156 MB    plugin-container
    98 MB    WindowServer
Virtual Memory Information: ?
    3.80 GB    Free RAM
    2.70 GB    Active RAM
    444 MB    Inactive RAM
    836 MB    Wired RAM
    624 MB    Page-ins
    0 B    Page-outs

I don't read "etrecheck" reports.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

MacBook Pro running extremely slow- something with RAM maybe?

I'm using a MacBook Pro, and yesterday, out of nowhere it stated running extremely slow and constantly freezes. I did some research and ended up looking in the Activity Monitor, and it seemed like I have no free space available - so I deleted a bunch of files and the computer is still running exactly as slow as it was before. My stats on the activity monitor are:
Free: 9.7 MB
Wired: 851.7 MB
Active: 2.11 GB
Inactive: 1.05 GB
Used: 3.99 GB
VM Size: 162.33 GB
Page ins: 541.0 MB
Page outs: 4.02 GB
Swap Used: 10.41 GB
Finder says I have 317.3 GB available. What's the problem here?

Safe mode prevents almost all third-party software from running such as preference panes, plug-ins, extensions, and launchagents and launch daemons. Normal boot lets all that run. So the issue is with one or more of these third-party items. Perhaps you can download EtreCheck 1.9.10 and run it when your system is at it's worst state. Then post the results here for us to check.
Also,
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.

IPhone 3G running extremely slow with iOS4

Anyone else having issues with their iPhone 3G running extremely slow since the iOS4 update? I am mainly noticing it in my messages, when typing a text message, it takes about 20 seconds to respond after touching the letters and when receiving a text message when in the middle of replying the previous messages disappear up, and you must swipe your finger down the screen to get them back.
Any suggestions to help resolve it?

All of us 3G users are waiting.
I just got off the phone with Apple Tech Support (I have the Apple Protection Plan for the 3G iPhone) and he had we do a reset as a new user.
After reading these recent posts, it is obvious that Apple owes us a real fix to their software upgrade.
It's very frustrating to use this phone now especially when it ran so well with the previous OS, 3.1.3.
The fact that Apple does not allow or support downgrading (or, in this case, an "upgrade") to the previous version or a fix now, is not favorable to the company's customers or image, in my opinion.
I specifically asked the tech when a fix will be coming out and he said in a couple of weeks, but that is mainly for the antenna issue. When pressed for an answer to our problems, he said he wasn't sure if that update to version 4 will address the 3G issues.
He suggested I post "product suggestions" @ apple.com/feedack and said that Apple does read these comments as well as the Discussion Boards....
Hey, Apple, if you're reading this......Help us out already with this software mess or face losing customers!!
Message was edited by: RICKRACK305
Message was edited by: RICKRACK305

Dreamweaver has been running extremely slow with reflow.css.

Dreamweaver has been running extremely slow with reflow.css. Wondering if anyone else is encountering this issue? If so, any fixes or known variable that causes this to happen?

I haven't see this. Can you describe a little more about what you are doing and what parts are slow? If there are specifc steps you can also file a bug with the Dreamweaver team:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=12

Recently my IMac with osx 10.4.11 has been running extremely slow. To the point where I have tried restarting.I have run Sophos antivirus software and have found nothing. Any suggestions?

Recently my IMac with osx 10.4.11 has been running extremely slow. It takes forever for Safari to switch screens. You can hear the computer constantly working. To the point where I have tried restarting.I have run Sophos antivirus software and have found nothing. Any suggestions?

First remove the antivirus software, it's possible that could be part of your problem! Slow Mac's can be caused by many different issues, including failing HD's, a HD that is too full (OS X really likes to have about 10-15% of the HD available), insufficient RAM, etc.. To troubleshoot your problem I'd recommend looking over 25 Ways to Speed Up Your Mac.

Hello, I have a macbook pro late 2011 15 inch with 4 gb ram. My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Is there a fix?

My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Furthermore, when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank and I sit here frustrated. Anytime i wake up my computer, my keys don't respond and I've waited at most 3 minutes untill i can type in my password. Even sometimes when i type in my password and hit enter, it takes forever to open up my mac. I have barely used any storage in my macbook, since i only use it for college, and I have run clamscan wiht no viruses showing... Any ideas?

when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

My final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help

my final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me. I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5

What did Apple tell you about what they did (or did not) find here?
See if working on the main disk is any faster.
USB2 is glacial, as I/O interconnects go. And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too. FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't.

Macbook Pro running extremely slow with version OS X 10.10.2

Since updating to Yosemite, version OS X 10.10.2 on my 2010 MacbookPro, it has been running extremely slow in all applications. Everything from booting up and shutting down to getting mail open, printing or using Safari takes a long time! Lots of beach balls spinning and other delays. I have 4 GB of memory and 2.66 GHz Intel Core 2 Duo.

When you see the beachball cursor, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

I am having trouble with PS running extremely slow any ideas?

My PS is running extremely slow and I have no idea why!

Please read these and proceed accordingly:
http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

PC running extremly slow with iTunes

Hello all,
Question is why my laptop would be running extremly slow with cover flow when it has more than enough horsepower to run almost any application (2.33 dual core, 512 graphics card, 2gig ram). iTunes runs just fine on my work laptop with cover flow, and its specs arent on par with my personal laptop. The only difference i can think of is that the work laptop (the good one) is running xp pro and the home is running vista 32bit. the other difference i can think of is that at home, all the music is stored via external HD while on the work laptop the files are stored locally on the laptops hard drive.
any advice would be greatly appreciated
Cheers!

Vista has been reported to be a bit more buggy/laggy/unstable with iTunes. Music running of an external will also be noticeably slower and more jumpy than running off an internal. You answered your own question.

How come my ps CS6 runs extremely slow?

After testing photoshop cs6, seeing how fast it worked on 3D on my pc I bought the web design and premium version. Time in between was several weeks. To my huge disappointement, the bought version runs extremely slow, mostly on 3D when I want to paint on target texture. Secondly I experiance a bug when I open my file and want to paint on targeted texture....brush shows inaccesible when wanting to paint. I do not mean greyed out, but the moment I hover over my 3d object it shows I cant paint (yes I have my layer selected;-). I have to fix this each time by changing targeted texture to some other and again switching back to the one I actually want to edit. As last thing, my OpenCL is greyed out.....maybe that causes the speed problems.....did not check with trial if it worked so not sure this is the issue=/....
When it comes to the speed I tried several things and now even reinstalled my whole pc hoping that would solve the problem.....it did not. Both CS6 photoshop 32-and 64-bit run slow on 3D.
I closed my trendmicro virusscanner to see if that would help....it speeded up only the start-up process but not the 3D. 3D works so slow that I have to wait 10 minutes after each move..just crazy....evenmore as it worked awesome with the trial version.
Also changed amount of memory assigned to ps by increasing to 80% and even 100%...nothing.
changed in graphic processors settings advanced into basic...nothing again.
No idea what to do next besides buying a new computer....I know I do not have a super strong one but as it worked perfectly I just don't get it. My pc runs this system:
Intel(R) Core (TM) 2CPU
[email protected] 2.66 Ghz
Ram 4GB
Windows 7 Ultimate 64-bit
GeForce8800GTX
I have the feeling it is some conflict between an update of windows or graphic driver (I have the newest so my info tells me) and photoshop...any ideas what to do as this is extremely frustrating?
THANK YOU IN ADVANCE FOR ANY HELP
In case it helps this is the copied system info from photoshop:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:15, Stepping:6 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2660 MHz
Built-in memory: 4030 MB
Free memory: 2858 MB
Memory available to Photoshop: 3432 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce 8800 GTX/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1200, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce 8800 GTX
OpenCL Unavailable
Driver Version: 8.17.12.9573
Driver Date: 20120209000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Caption: NVIDIA GeForce 8800 GTX
Video Card Memory: 768 MB
Video Rect Texture Size: 8192
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 488,3G, 448,7G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.0
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Embed Watermark 4.0
   Entropy 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Extrude 13.0
   FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mean 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Median 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mezzotint 13.0
   Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Pinch 13.0
   Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Range 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0
   Shear 13.0
   Skewness 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Sumi-e 13.0
   Summation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE
12-08-2012
Installed newer graphic driver as its seemed Microsoft update had an older one installed on my pc. This one is straight from Nvidia site with 3D support. Nevertheless ps runs slow and especially 3D. 32 Bit runs tiny bit faster than 64-bit. Now my photoshop even crashes with 3D: 32 bit holds out longer then 64...last one freezes almost immediately and I can close it through task manager. After installing newer driver at least the 64 bit shows OPenCL , where 32-bit not....maybe thats normal...
I hope anyone can help me as I even checked the system requirements on adobe and mine should be more than fine.
Message was edited by: Nethergirl

Well, it must be a system-specific bug of some sort that's been introduced, because I was able to create a 4200 x 3500 image made by mapping an image of similar size to a cylinder, and the cylinder would move/rotate in real time. Of course, I have a completely different video card and system than you do, but I'm just verifying that it's not broken everywhere.
Rendering isn't hugely fast, but that's not unexpected with a larger image.
Maybe being more specific would help. Is your mesh complex?
Is it something you'd be willing to share online or describe how to create? I would be happy to try to match what you're doing more thoroughly to see whether I can reproduce the slowdowns.
Beyond that, I'm not sure what to suggest... You don't have a lot of RAM to be working on 15 megapixel images, but as you say the thing to concentrate on is that you're seeing quite different performance from the Ps CS6 beta version.
-Noel

Macbook Pro running extremely slow

While still on Mavericks my Macbook Pro 13 mid 2010 (2.4 Intel core 2 duo) sporadically began running extremely slow functions, even the mouse cursor moved in jolts and steps, to type a word in google search engine I had to wait a few seconds after being typed for the word to appear on screen. The internal speaker volume responds 10 seconds after tapping the buttons on the keyboard. Videos are unplayable in netflix and other sites because picture freezes and runs in jolts and steps. Its Not the internet connection or the streaming.
I upgraded to Yosemite to see if this would fix the problem, I upgraded the darned adobe flashplayer believing maybe I needed the latest software available for my programs for the computer to run smoothly. I upgraded the RAM to 8GB from 4GB and did not fix the problem. I have more than half of the 500GB hard drive with free space. I'm getting a Java Runtime Environment download prompt to view properly something every time I boot the computer. The "slowness" comes and goes. But it gets more frequent and worse each day. I can't work. Could it be some type of malware that makes the computer slow? I can't identify a specific malware to address and remove. Could it be that the fan isn't working properly and runs slow when its too hot?? Please HeLP!!

a very good and quite current discussion on the issue is here > Mac slow after Yosemite 10.10.1 up-grade - kernel task? - the best of the best here in the forum weigh in here. - Feliz Navidad - ÇÇÇ

Macbook Pro running extremely slow since updating to Yosemite

Hello All,
I am new to the community and I'm hoping your pooled expertise can assist me with my issues. I went ahead and posted the results of my diagnostic scan below. My main concerns are that my Macbook Pro is now extremely slow after OSX updates. Also, laptop is running extremely hot to touch. I have mentioned other ongoing issues. I offer thanks in advance for any assistance.
Problem description:
Macbook Pro 13":
Purchased in mid-2010.
Most Recent Issue (Main Concern):
(1) I recently updated OS X from Mountain Lion to Maverick. Computer began running extremely slow and “jerky.”
(1.1) Shortly after this I updated to OS X Yosemite. Computer runs, and types, even slower than before.
Ongoing Issues (Greater than one year):
(1) Extremely short battery life (may last two hours on full charge)
(2) Macbook runs extremely hot to touch (fan runs continuously but can’t begin to keep it cool)
(3) SD Card reader doesn't recognize/open an SD card when inserted.
Lex Cschellings Requested the Following:
No obvious elements in the list.
This may well be a dying disk and/or a very bad battery.
Do following:
make a new etrecheck list and in the problem description put what Applications->Utilities->SystemInformation says about the battery (under the Power heading in the left panel): give cycle count and battery condition.
Then post the link in a new thread.
In the meantime the crash report is probably a French Dictionary issue (font? garcon garçon) you have installed, uninstall that and see if it happens again.
Lex
Battery Information is as follows:
Battery Information:
Model Information:
Serial Number: W00324SYZD3LA
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 000a
Cell Revision: 165
Charge Information:
Charge Remaining (mAh): 3205
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 4350
Health Information:
Cycle Count: 987
Condition: Normal
Battery Installed: Yes
Amperage (mA): -2489
Voltage (mV): 11143
EtreCheck version: 2.1.5 (108)
Report generated January 4, 2015 at 11:09:57 PM CST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: one day 1:57:26
Disk Information: ℹ️
ST9250315ASG disk0 : (250.06 GB)
EFI (disk0s1) <not mounted> : 210 MB
Untitled (disk0s2) / : 249.20 GB (85.96 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[killed]      com.apple.CallHistoryPluginHelper.plist
[killed]      com.apple.coreservices.appleid.authentication.plist
[killed]     com.apple.sbd.plist
[killed]      com.apple.spindump_agent.plist
4 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed]      com.apple.AssetCacheLocatorService.plist
[killed]      com.apple.ctkd.plist
[killed]      com.apple.icloud.findmydeviced.plist
[killed]      com.apple.ifdreader.plist
[killed]      com.apple.MobileFileIntegrity.plist
[killed]      com.apple.nehelper.plist
[killed]      com.apple.softwareupdate_download_service.plist
[killed]      com.apple.softwareupdated.plist
[killed]      com.apple.tccd.system.plist
[killed]      com.apple.wdhelper.plist
[killed]      com.apple.xpc.smd.plist
11 processes killed due to memory pressure
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[running] com.google.Chrome.framework.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Drive Application (/Applications/Google Drive.app)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.7 [Support]
AdobePDFViewer: Version: 10.1.7 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
Google Earth Web Plug-in: Version: 7.0 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      6% ARM
      5% Google Chrome
      2% launchservicesd
      0% AppleSpell
      0% WindowServer
Top Processes by Memory: ℹ️
90 MB Google Chrome
38 MB Google Chrome Helper
21 MB mds
17 MB WindowServer
17 MB System Information
Virtual Memory Information: ℹ️
25 MB Free RAM
952 MB Active RAM
944 MB Inactive RAM
578 MB Wired RAM
9.26 GB Page-ins
278 MB Page-outs
Diagnostics Information: ℹ️
Jan 3, 2015, 09:13:10 PM Self test - passed

Lex,
I'm not sure if I did this correctly, or if posting this is what you meant, but here is the DriveDX Health report.
### SYSTEM INFORMATION ###
Report Timestamp                     : January 6, 2015 3:09:15 PM CST
Report Timestamp (ISO 8601 format)   : 2015-01-06T15:09:15
Application Name                     : DriveDx
Application Version                  : 1.3.0.444
App SubBuild                         : 0
Application Edition                  : 1
DriveDx Knowledge Base Revision      : 1/1
Computer Name                        : <BLOCKED>
Host Name                            : <BLOCKED>
IP Address                           : <BLOCKED>
Computer Model                       : MacBookPro7,1
OS Boot Time                         : 2015-01-06T13:54:46
Time Since Boot                      : 01h 14m 29s
OS Name                              : Mac OS X
OS Version                           : 10.10.1
OS Build                             : 14B25
OS Kernel Version                    : Darwin 14.0.0
ATA Command Support Tolerance        : verypermissive
N of drives with S.M.A.R.T support   : 1
### DRIVE 1 OF 1 ###
Last Checked                         : January 6, 2015 2:59:53 PM CST
Last Checked (ISO 8601 format)       : 2015-01-06T14:59:53
Advanced SMART Status                : OK
Overall Health Rating                : GOOD 100%
Overall Performance Rating           : GOOD 100%
Issues found                         : 2
Serial Number                        : 5VCK3CCN
WWN Id                               : 5 000c50 029e6a4c3
Volumes                              : Untitled
Device Path                          : /dev/disk0
Total Capacity                       : 250.1 GB (250,059,350,016 Bytes)
Model Family                         : Seagate Momentus 5400.6
Model                                : ST9250315ASG
Firmware Version                     : 0008APM2
Drive Type                           : HDD 5400 rpm
Power On Time                        : 7,694 hours (10 months 20 days 14 hours)
Power Cycles Count                   : 4,772
Current Power Cycle Time             : 1.2 hours
=== DEVICE CAPABILITIES ===
S.M.A.R.T. support enabled           : yes
DriveDx Active Diagnostic Config     : Seagate HDDs config [hdd.seagate]
Sector Logical Size                  : 512
Sector Physical Size                 : 512
Physical Interconnect                : SATA
Removable                            : no
Ejectable                            : no
ATA Version                          : ATA8-ACS T13/1699-D revision 4
SATA Version                         : SATA 2.6, 1.5 Gb/s
Attributes Data Structure Revision   : 10
SMART Command Transport (SCT) flags : 0x103f
SCT Status supported                 : yes
SCT Feature Control supported        : yes
SCT Data Table supported             : yes
Error logging capabilities           : 0x1
Self-tests supported                 : yes
Offline Data Collection capabilities : 0x73
Offline Data Collection status       : 0x0
Auto Offline Data Collection flags   : 0x0
Bay #                                : 1
I/O Path                             : IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice
[Known device                       ]: yes
[Drive State Flags                  ]: 0xc0000000
[Last State Change Timestamp        ]: 2015-01-06T14:52:48
[Last State Change Flags            ]: 0x40000000
[Last State Change Diff Flags       ]: 0x1
=== CURRENT POWER CYCLE STATISTICS ===
Data Read                           : 2.2 GB
Data Written                        : 768.4 MB
Data Read/Write Ratio               : 2.91
Average Throughput (Read)           : 2.6 MB/s
Average Throughput (Write)          : 865.2 KB/s
Operations (Read)                   : 43,921
Operations (Write)                  : 28,114
Operations Read/Write Ratio         : 1
Throughput per operation (Read)     : 52.2 KB/Op
Throughput per operation (Write)    : 28.0 KB/Op
Latency Time (Read)                 : 0 ns
Latency Time (Write)                : 0 ns
Retries (Read)                      : 0
Retries (Write)                     : 0
Errors (Read)                       : 0
Errors (Write)                      : 0
=== PROBLEMS SUMMARY ===
Failed Indicators (life-span / pre-fail) : 0 (0 / 0)
Failing Indicators (life-span / pre-fail) : 0 (0 / 0)
Warnings (life-span / pre-fail)           : 2 (2 / 0)
Recently failed Self-tests (Short / Full) : 0 (0 / 0)
I/O Errors Count                          : 0 (0 / 0)
Time in Under temperature                 : 0 minutes
Time in Over temperature                  : 0 minutes
=== IMPORTANT HEALTH INDICATORS ===
ID NAME                                         RAW VALUE            STATUS
5 Reallocated Sector Count                     0                    100% OK
197 Current Pending Sectors Count                0                    100% OK
198 Offline Uncorrectable Sector Count           0                    100% OK
199 UDMA CRC Error Count                         20,154               100% Warning
=== TEMPERATURE INFORMATION (CELSIUS) ===
Current Temperature                  : 31
Power Cycle Min Temperature          : 29
Power Cycle Max Temperature          : 34
Lifetime Min Temperature             : 0
Lifetime Max Temperature             : 46
Recommended Min Temperature          : 3
Recommended Max Temperature          : 62
Temperature Min Limit                : 0
Temperature Max Limit                : 65
=== DRIVE HEALTH INDICATORS ===
ID   | NAME                                        | TYPE      | UPDATE | RAW VALUE        | VALUE | THRESHOLD | WORST | STATUS
   1   Raw Read Error Rate                           Life-span   online        0x173A0E        120           6     99     100% OK
   3   Spin Up Time                                  Pre-fail    online           0            100           0     99     100% OK
   4   Start Stop Count                              Life-span   online         5,034           96          20     96    95.0% OK
   5   Reallocated Sector Count                      Pre-fail    online           0            100          36    100     100% OK
   7   Seek Error Rate                               Pre-fail    online       0x5391F35         79          30     60     100% OK
   9   Power On Hours                                Life-span   online         7,694           92           0     92    92.0% OK
10   Spin Retry Count                              Pre-fail    online           0            100          97    100     100% OK
12   Power Cycle Count                             Life-span   online         4,772           96          20     96    95.0% OK
184   End-to-End Error                              Life-span   online           0            100          99    100     100% OK
187   Reported Uncorrect                            Life-span   online           0            100           0    100     100% OK
188   Command Timeout                               Life-span   online      0x500050192       100           0     94     100% OK
189   High Fly Writes                               Life-span   online           0            100           0    100     100% OK
190   Airflow Temperature Celsius                   Life-span   online           31            69          45     56    43.6% OK
191   G-Sense Error Rate                            Life-span   online          239           100           0    100     100% OK
192   Power-Off Retract Count                       Life-span   online         3,162           99           0     99    99.0% OK
193   Load Cycle Count                              Life-span   online        720,544           1           0      1     1.0% Warning
194   Temperature (Celsius)                         Life-span   online           31            31           0     44    31.0% OK
195   Hardware ECC Recovered                        Life-span   online        0x173A0E         50           0     43    50.0% OK
197   Current Pending Sectors Count                 Life-span   online           0            100           0    100     100% OK
198   Offline Uncorrectable Sector Count            Life-span   offline          0            100           0    100     100% OK
199   UDMA CRC Error Count                          Life-span   online         20,154         200           0    199     100% Warning
254   Free Fall Sensor                              Life-span   online         2,441            1           0      1     100% OK
=== DRIVE ERROR LOG ===
error log is empty
=== DRIVE SELF-TEST LOG ===
#   | LIFETIME (H)   | TEST TYPE         | PROGRESS | STATUS                          | LBA of 1st error
1          7694        Short offline         100%     Completed without error              -

Help Center is running extremely slow in OSX Lion.

Help Center is running extremely slow on my MacBook Pro with OSX Lion (8 GB RAM, 2.4 Ghz Intel Core i5).
It takes several seconds to start up, occasionally variable names like "[currentBookname]" are displayed instead of section headings, results update extremely slowly. This has always been an issue but keeps getting worse it seems.

Hi Ester:
Please check if the SAP Notes below are applicable to your System.
1516870 - "Performance improvement FTI_LDB_PB_SEL_PREPARE_OUTPUT"
1376395 - "BW, REP: Performance of Accounting Data Extraction"
1307259 - "REP: Improving performance of extractor 0CFM_DELTA_POSITIONS"
Regards,
Francisco Milán.

PS CC running extremely slow... No issues with CS6...

Similar Messages

Maybe you are looking for