PS CC won't open raw files from my Nikon D600

My camera is on the supported list...I've see others with the same problem here.
I have the latest download of PScc, Bridge and Nikon Transfer.  I have the latest plug in from Camera Raw, 8.3.141 yet I cannot get the nef files to load in Camera Raw, which I prefer for pre-PS work.
Can someone assist me?  Thanks.
Larry, Northfield, MN

Noel,
Good morning, and may I just add  THANK YOU!
While certainly not as efficient or handy, that is the answer.  I simply
instructed my PC to open the containing folder, in this case my direct card
reader, and manually copied the files to my hard drive (highlight first and
last-SHIFT-Enter) and moved them to a pre-named subdirectory.
I opened PScc and pointed to that file, clicked on the photo I wanted and
VIOLA!  Opened in Camera Raw and I was off to the races!
Perhaps the user groups can make some noise and someone at Nikon may take
notice!
Thanks again for the suggestion.
Larry

Similar Messages

  • Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

    Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

    In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
    Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
    I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
    Having 2 versions of ACR will cause problems.
    You have already downloaded DNG Converter 8.7.1.
    Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
    Be aware that DNG converter is a stand-along application and not a plug-in.
    You need to open DNG converter at select the FOLDER that contain your .NEF files.
    Don't open the folder and try to select individual files, it doesn't work that way.
    After converting your D810 files to DNGs you can then open the DNGs in CS5
    The problem is your camera didn't exist when CS5 & its version of ACR was developed.
    i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

  • Bridge won't open raw files from my canon mark iii

    Bridge won't open raw files from my canon mark iii?  Are you kidding adobe? This camera has been out for over six months. Why isn't it loaded into the program? This camera is sooo main stream!

    What Mark III?
    Are you referring to the Canon EOS 1D Mark III or the Canon EOS 5D Mark III?
    And what version of Adobe software are you referring to?
    There definitely is support for the EOS 1D Mark III in in versions of the Creative Suite dating back several versions. Support for the EOS 5D Mark III was made available in an update to Creative Suite 6 and Lightroom 4.x.
              - Dov

  • Aperture3 won't open raw files from my new nikon D5100

    Aperture3 won't open raw files from my new nikon D5100. It worked fine with my D40, but when I got the D5100 it wouldn't open the raw files from it. Is there an update for it?

    https://discussions.apple.com/message/15087160#15087160

  • How can I open raw files from my Nikon D7100 in CS4 or CS5?

    How can I open raw files from my Nikon D7100 in CS4 or CS5?

    Andy,
    In the simple and short form, what happens with the ACR (Adobe Camera RAW) module is that it gets updated with regularity, to accommodate the camera mfgr's. changes for their newer models. That ACR works within the host program, such as Ps, PsElements, Lightroom, etc.. At a point, Adobe ceases to support older host program versions. When that happens, the user has a few options:
    Upgrade the host program version
    Use another host program, such as PsElements or Lightroom
    Use the free DNG converter, per Curt's suggestion. That is not host program dependent
    Glad that the DNG Converter works for you.
    Good luck,
    Hunt

  • Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11?

    Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11? I allready tried to install camera raw 8.7.1 but it doesn't work.

    Yes, I see:
    Letzte Aktualisierung
    16.04.2012
    The link I gave is listed in the faqs of this forum.
    Photoshop Elements FAQ List
    mfG
    Michel

  • How do I open RAW files from the Nikon D4s in photoshop?

    How do I open RAW files from the Nikon D4s in Photoshop? I have the updated newest version.

    The Nikon D4S is a brand new camera which has just been added by Adobe to Camera Raw 8.4.
    http://labs.adobe.com/technologies/cameraraw8-4/?tabID=details#tabTop
    8.4 has not yet been finally released but you can download and install a pre-release copy for CS6 and CC (it is not compatible with CS5 and earlier)
    CS6:http://labs.adobe.com/technologies/cameraraw8-4/
    CC: http://labs.adobe.com/technologies/cameraraw8-4-cc/

  • When I try to import raw files from my nikon d600 I get the message Unsupported image format, When I try to import raw files from my nikon d600 I get the message Unsupported image format

    When I import raw files from my Nikon D600 into Aperture I get a tryangle sign with "unsupported image format"

    Latest Adobe DNG converter (7.2) DOES indeed convert NEF pictures coming from a D600.
    Head up to Adobe's website and download the app.
    You'll only miss the focus information (focus distance and focus sensors used), but you'll be able to work with raw and not rely on jpg only!

  • Iphoto won't open raw files from leica dlux-6 camera.

    I just purchased a leica d-lux 6 camera and use a macbook. seems that iphoto which I've been using for years  can not open raw files from this camera. Will it ever?  I downlaoded the free lightroom Leica gave and it can open raw but it seems to require more of a learning curve than iphoto. If I continue to use both lightroom and iphoto on same mac computer cause problems?  Any suggestions?  I guess i could shoot in jpeg and raw and use only iphoto for jpegs and use LR for the occasional raw shots?

    Correct, the D-Lux 6 is not currently supported for Raw in iPhoto or Aperture. Apple may add support in a future update. Let them know you want it:
    iPhoto menu -> Provide iPhoto Feedback
    LR is a very powerful, professional grade application and yes, requires a lot more learning than iPhoto. If that doesn't interest you, then respectfully, I would suggest that you just shoot Jpeg.
    Regards
    TD

  • Cannot open raw files from my Nikon D3200 in Elements 11

    After I found I could not open raw files from my new Nikon D3200 in Elements 10, and did a couple hours of searching the web site, I upgraded to Elements 11. Elements 11 also will not open the raw files from the D3200

    I found the solution in a Light Room forum.  The problem was I was using an older version of View NX2 to transfer the files. I uninstalled that version and installed the version supplied with the D3200. The files now load into Elements 11 with no problem. Apparently the old version affects the content of  the NEF files, as Elements was not able to recognize them, and gave an error message that the files were from an unsupported camera.
    Thanks for looking into this, Don Rieser  

  • Why cannot I open NEF files from a Nikon D600 with Photoshop CS5?

    When I try to open raw NEF files from a Nikon D600 with Photoshop CS5 I get: "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw"
    Nikon D600, however, is among the camera models listed as compatible with Camera Raw CS5.
    I have never had any problem in Camera Raw CS5 and older versions with raw NEF files from a Nikon D80 camera.
    Is there an update for CS5 to make it compatible with Nikon D600 raw NEF files?
    Many thaks in advance.

    Which verison of camera raw do you have installed? I would update to the latest camera raw plug in. Here is a link to 6.7
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5372

  • Bridge CS4 won't open RAW files from Canon 70D

    I have Photoshop/Bridge CS4 which used to read CR2 Raw files fine from old Canon 30D@.  I've just purchased a Canon 70D.  Bridge CS4 will read the MOV video files fine, but not the Raw CR2.  I've downloaded and installed Adobe DNG Converter 8.5, but when I open it and it asks to open files to convert, the CR2 files are still unreadable and greyed out.  I'm on a Mac OSX 10.9.4.  Is there some way I could  preview RAW files from the 70D in Bridge CS4, and open in Camera Raw?

    You need to upgrade to PSE12. Alternatively, download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software) You could also use the Canon software that came with your camera to convert to tiff, which would open in PSE11.
    Windows download (.exe file) click here DNG Converter 8.2
    Mac download (.dmg file) click here DNG Converter 8.2
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • CS 5 Extended won't open Raw files from my Canon SL1

    My Raw plug-in version is 6.7.0.339. Is there a later version for me to download and install? Do I need to use Adobe DNG Converter? If so, which version?
    Forgive me if this question has been asked before. I did search the forums but didn't find an answer for CS5 Extended.
    Thanks!

    Your version of Photoshop will not open Canon Digital Rebel SL1 images directly. Support wasn't added until Photoshop CS6 in Camera Raw 7.4.
    Adobe stopped updating older versions of Camera Raw to be able to read raw files from newer cameras whenever they released a new major version of Photoshop.  Thus, the version you have is no longer receiving updates and will never directly be able to open your CR2 files.
    You can check this yourself:
    First you need to determine when Adobe released support for your new camera in Photoshop. To do that, look at these two pages.  You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Since your version of Photoshop cannot support your camera directly , you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
    Photoshop Help | Digital Negative (DNG)
    The DNG converter DOES work, and you will be able to open the converted DNG files with your version of Photoshop, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
    Note the availability of the low cost Creative Cloud Photography bundle:
    Creative Cloud free trial & plans : Adobe Creative Cloud
    -Noel

  • I'm using a 30 days trial of PS  CC...but I Can't open raw files from my NIKON D 7100

    I can't open raw files in PS CC.
    I'm using NIKON D7100.

    Noel,
    Good morning, and may I just add  THANK YOU!
    While certainly not as efficient or handy, that is the answer.  I simply
    instructed my PC to open the containing folder, in this case my direct card
    reader, and manually copied the files to my hard drive (highlight first and
    last-SHIFT-Enter) and moved them to a pre-named subdirectory.
    I opened PScc and pointed to that file, clicked on the photo I wanted and
    VIOLA!  Opened in Camera Raw and I was off to the races!
    Perhaps the user groups can make some noise and someone at Nikon may take
    notice!
    Thanks again for the suggestion.
    Larry

  • Why wont PS CS5 open NEF files from a Nikon D600

    I have PS CS5 and I recently updated my camera to a Nikon D600. I shoot in RAW and when I tried to open photos to edit, PS said I needed to update my Camera Raw plugin. I found the most recent plugin for CS5 and photos still won't open
    What do I need to do to get them to work? Will I have to bite the bullet and update to CS6 or is there a way around it?
    Please help!

    Camera Raw 7.3 was the first version to fully support the Nikon D600
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Camera Raw 7+ requires Photoshop CS6+
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    You must either upgrade to Photoshop CS6 (to open and edit your Raw files) or convert your D600 files to DNG with the free Adobe DNG converter and edit the DNGs

Maybe you are looking for

  • How to print on my HP Deskjet F4400 to my Chromebook

    How to print from my HP Deskjet F4400 to Chromebook

  • How to download Adobe Reader?

    downloaded free adode reader cannot view attachment in english format?

  • Can anyone shed some light on HotSpot/JNI?

    I posted this to the Hotspot forum, but this place might be better ... Hello, I have just wrapped a C API in JNI. It pumps messages into a callback, which are then forward to the Java side via a env->CallIntMethod(object, method, jlong, jlong). On th

  • Interactive Brochure

    Does anyone know if I can use iDVD to produce an interactive 'brochure' that can run on any computer, the contents of which include a QuickTime animation and a series of PDF 'pages' containing images and text. I want the DVD to autorun with the anima

  • Unable to uninstall last Exchange 2010 server

    Hi, I am unable to uninstall last Exchange 2010 server from the organization. I get error message: Summary: 3 item(s). 2 succeeded, 1 failed. Elapsed time: 00:00:19 Configuring Prerequisites Completed Elapsed Time: 00:00:00 Mailbox Role Prerequisites