PS CS3 shutdown error in vista home premium

This just started and I can't figure out what changed.
I use vista home premium and photoshop cs3. The program works perfectly with no problems until I want to close the program. When I close the program, I get a windows error message saying the program has stopped working and windows is trying to correct the problem. Then a window comes up saying a problem has caused the program to stop working and windows will close the program and notify me if a solution is available.
Earlier this morning, I had 2 jpeg images open, changed one and tried to save it when an error message told me that a program error occurred and it could not be saved. When I saved it as a psd file, it saved with no problems at all. Could these two be related?
I re-installed the program without removing it first and in doing so, the messages on screen said it was repairing the shared components so I figured it had found the problem and was fixing it. No joy.
Has anyone else had this problem? Any solutions?
Any help would be most appreciated!
Thank you,
Randy

If that fails to solve the problem, then I recommend you
contact Adobe
directly and use one of your one-on-one support incidents.
http://www.adobe.com/support/programs/dreamweaver/index.html?tab:contact=1
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Vidflow" <[email protected]> wrote in
message
news:fp5pi7$jv5$[email protected]..
>I have now tried to install DW CS3 8 more times.
>
> I have tried the following suggestions from listers and
the university
> help
> desk;
>
> 1. running cmd and typing regsvr32 jscript.dll to fully
establish admin
> privledge.
>
> 2. Using AdobeCS3Cleaner in both methos 1 and then 2 to
clean out old
> files
> that might interfere. MS cleaner was installed also as
per Adobe
> instructions.
>
> 3. Running msconfig to do an alternate shutdown of all
non MS program,
> virus
> checkers, etc.
>
> 4. I have used these separatedly and in combination. The
same failure to
> install DW CS3 occurs. DW does not get installed and
shared components
> also
> fail.
>
> This is maddening.
>
> Adrian
>
>
>
>
>

Similar Messages

  • Error trying to install CS4 design premium on windows vista home premium

    I'm having trouble installing CS4 design premium, as soon as it does the checking system it comes up with an error that says I need windows XP sevice pack 2 and some other windows.  I have Windows vista home premium and all the other requirements, so i'm not sure why it's saying that?  I do have CS3 installed but I didn't want to unistall it before I installed the CS4, cause then I wouldn't have anything to work on.  The CS4 is brand new and I have it installed with no problems on another computer that has windows XP.  Would I have to uninstall CS3 before I try to install it?  I'm afraid that I will be left with neither if I do that and this was not a cheap investment to take that chance.  Does anyone know how I could get CS4 design premium installed?
    Thank you
    Jorge Gonzalez

    You should npt have to uninstall anything except Acrobat for CS4 to install. You can call tech support for free installation support.

  • Dreamweaver CS3 hangs on "initializing files" in Windows Vista Home Premium

    Hi,
    Anybody else encountering this issue? I noticed this7 error
    in Windows Vista Home Premium. When you launch Dreamweaver CS3, it
    opens the splash screen, displays “initializing files”
    and thats it.
    Necessary Troubleshooting steps we’re already done to
    attempt to launch/fix the program but to no avails.
    seems the problem happens on acer computers with 4 gigs of
    ram.
    You can check it from this
    Thread
    Thanks! I hope someone from engineering can take a look at
    this issue!

    A little more on this topic with solution ...
    http://sidapolinario.unicpinoy.com/2008/05/09/dreamweaver-cs3-some-emmerging-issues/
    Regards.
    Patrick.

  • Installation of Adobe Indesign CS3 on Windows Vista Home Premium

    Hello,
    I can not install Indesign CS3 on my Notebook.
    The operating system is Windows Vista Home Premium SP1.
    The error message contains: "Internal Error 2739".
    It is coming at the beginning of the installation.
    Can anybody please help me?
    Alois Blaimer

    Yes, for installation issues, please call Adobe Technical Support. There is no charge for assistance with installation issues. This is not an issue that you should can expect support for on this forum.
    - Dov

  • DW CS3 fails to Install in Vista Home Premium

    Hi,
    My new DW CS3 disk will not install DW to my Vista Home
    Premium machine.
    I am looged on as admin. I have tried the suggestions on the
    support page. Disabled norton, Disabled Google toolbar. Tried to
    weed out incomplete Adobe files etc.
    Starngely older Adobe apps, Premiere Pro and After Effects
    installed with right click and selecting "run as XP program. i have
    found no way to do this with the CS3 disk.
    A forum search uncovered no new ideas. Two other DW support
    forums have been fruitless also.
    I need this to run ASAP.
    Any help would be appreciated.
    Thanks,
    Adrian

    If that fails to solve the problem, then I recommend you
    contact Adobe
    directly and use one of your one-on-one support incidents.
    http://www.adobe.com/support/programs/dreamweaver/index.html?tab:contact=1
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Vidflow" <[email protected]> wrote in
    message
    news:fp5pi7$jv5$[email protected]..
    >I have now tried to install DW CS3 8 more times.
    >
    > I have tried the following suggestions from listers and
    the university
    > help
    > desk;
    >
    > 1. running cmd and typing regsvr32 jscript.dll to fully
    establish admin
    > privledge.
    >
    > 2. Using AdobeCS3Cleaner in both methos 1 and then 2 to
    clean out old
    > files
    > that might interfere. MS cleaner was installed also as
    per Adobe
    > instructions.
    >
    > 3. Running msconfig to do an alternate shutdown of all
    non MS program,
    > virus
    > checkers, etc.
    >
    > 4. I have used these separatedly and in combination. The
    same failure to
    > install DW CS3 occurs. DW does not get installed and
    shared components
    > also
    > fail.
    >
    > This is maddening.
    >
    > Adrian
    >
    >
    >
    >
    >

  • CS3 'freezed' installation problem on Windows Vista Home Premium.

    Hi! I searched everywhere for answer that installation of my PS CS3 is freezed in moment on the screen.
    I installed Acrobat Reader, Dreamweaver cs3 only. Both in English language.
    I tried to uninstall, then install, using cs3clean, but it`s nothing change in my situation. Even I tried to copy whole content of my cs3 installation disk to hard drive.
    Why installation is freezed ? The screen:
    http://img237.imageshack.us/img237/7184/cs3problemja8.jpg
    Ps. I`ve got Vista Home Premium.
    Thanks, best regards!
    Ps2. Sorry for my english :)

    Kasprzak,
    How long did you allow it to sit like this? Only reason that I ask is that I recently did an install on my laptop, and the DVD drive was EIDE and it took probably 20 mins. to get through each disc.
    For installation issues, Adobe offers free tech support. Check your documentation for the toll-free phone number in your country, or region.
    Hunt

  • Error message in windows vista home premium

    I was installing a driver package...from microsoft corporation when this window showed up.
    (some folders cannot be accepted because "skip system and application folders" option enabled}
    I can't find any information on the net or microsoft on How to fix the problem..Any suggestions would be greatly Appreciated it.....
    Thank You!

    thank you ed
    but i think the whole operating system could be compromised(windows vista home premium)
    actually these are drivers for a printer scanner fax copier from brother...but nothing is helping.....
    I ran it as an Administrator..but either i get the message above or this error(difx driver package install error=1610154566.the exe's are 295-INST-A.EXE and 375-USB2KXPVISTA-32-A-US.EXE downloaded from Brother site...I don't know.Maybe i shall re install
    the all operating system....this computer was my brothers...and he could have been compromised with today's viruses..I thank you for taking the time to answer me....

  • ITunes update error 7 (windows error 1114) on Windows Vista Home Premium SP2

    I have been trying to update iTunes for the past month. I admit that I had not been keeping up with the updates for about a year but now that I want to update it, I am getting an error.
    Computer: hp Pavilion dv6700 Notebook PC, Intel Core2 CPU T8100 at 2.10 GHz
    OS: Windows Vista Home Premium, Service Pack 2
    iTunes update error 7 (Windows error 1114)
    error message from Windows:
    Runtime Error!
    Program: C:\Program Files\iTunes\iTunes.exe
    R6034 Application has made an attempt to load the C Runtime Library incorrectly. Please contact applications support (that is Apples iTunes) team for information.
    I am also getting C Runtime Library error message about once a day since I tried to update iTunes.
    What do I do?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Windows vista home premium service pack 2.error measage __(the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance )no error nurber

    windows vista home premium service pack 2。error measage __(the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance )no error nurber

    Hi Abdallah,
    According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
    Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted.  I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
    then reinstall SQL Server 2008 R2. For more details, please review this similar
    article.
    Thanks,
    Lydia Zhang

  • Error 1935 on Windows Vista Home Premium

    Attempting to install Adobe Reader 8.1.2 on a new Windows Vista Home Premium on a new Dell Inspiron 1720, and I get the following error every time:
    Error 1935.An error occurred during the installation of
    assembly
    'Microsoft.VC80.CRT,version="8.0.50727.163",type="
    win32",publicKeyToken="1fc8b3b9a1e18e3b",processo
    rArchitecture="x86"'. Please refer to Help and Supp...
    Has anyone else ran into this issue? If so, is there a solution out there? Thanks for your time!

    hi doug,
    this is vinay.
    i have been facing the same issue for the past few weeks.i have a toshiba satellite pro with windows vista home premium.
    contacted tech support at adobe.they suggested inactivating firewall and antivirus programs. made no difference.
    a google search revealed that a few others have been facing the same issue with no clear solution.there was some discussion about this being linked to windows vista but i am not sure.
    please do let me know if you find a solution.
    thanks
    vinay

  • VPN-Client V 5.0 under Windows Vista Home Premium - Error for Installation

    Hello
    I hope you can help me. During installating the VPN-Client I recieve the Error 1609: Users ist not a unser...
    One message says that I creat new usergroups. Unfortunately this ist not possible under Vista Home Premium.
    Is there a solution, how I can install VPN?
    Thanks for your help.
    Best regards
    Pascal

    Try installing the 5.0.00.0340 client version
    also see the details of this bug CSCsj89801

  • Windows Vista Home Premium (SP2) - Update Error Code 80071AA7: Unable to install KB3033889

    I am having problems updating my Windows Vista Home Premium (SP2) with KB3033889
    I am always getting the Update error Code 80071AA7
    I have tried a clean boot, to install Microsoft Update Standalone Package (KB3033889), but does not worked.
    I tried Sfc /scannow, and "Could not repair corrupted file", and i have checked "CBS.log" file:
    POQ 93 ends.
    2015-03-19 02:18:46, Info                  CSI    000001dc [SR] Verify complete
    2015-03-19 02:18:46, Info                  CSI    000001dd [SR] Repairing 1 components
    2015-03-19 02:18:46, Info                  CSI    000001de [SR] Beginning Verify and Repair transaction
    2015-03-19 02:18:46, Info                  CSI    000001df Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini
    do not match actual file [l:24{12}]"settings.ini" :
      Found: {l:32 b:ceS/bmgz5Fkqs00J27mkzYn/b2SuD9mJsx/R1y3hPqA=} Expected: {l:32 b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o=}
    2015-03-19 02:18:46, Info                  CSI    000001e0 [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version
    = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    After that i have checked "WindowsUpdate.log" file:
    2015-03-18    22:12:23:584    1264    db0    Handler    WARNING: Got extended error: "POQ    Operation    HardLinkFile    OperationData  
     \SystemRoot\WinSxS\x86_microsoft-windows-t..icesframework-msctf_31bf3856ad364e35_6.0.6002.19296_none_774ec727ec2f0da4\msctf.dll, \??\C:\Windows\System32\msctf.dll"
    I am out of ideas.
    Can some one please help me?
    What can i do?
    Thank you.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Vista Home Premium - Error code 80070490 - Windows update

    Computer - Satellite 200
    Operating system - Vista Home Premium (service pack 1)
    Problem - When I try to update from Windows Update (both manual and automatic) I get error code 80070490
    I have tried - System restore, downloading and paying for "RegCure" and following instructions on Microsoft forum all without success.
    The computer was supplied with a recovery disk which does not have "repair" facility.
    If you have a solution that does not involve a full re-load I would be very grateful
    Please make instructions comprehensible to a non-techno!
    Thank you

    This error may occur if the older Windows Update engine files cannot be
    replaced by Windows Update Agent 3.0 (7.0.6000.374).
    To troubleshoot this issue, I suggest we first reset permission and
    reinstall Windows Update Agent 3.0.
    Step 1: Reset permission
    ================
    1. Please download the subinacl.msi file from the following link and save
    the installation patch onto the Desktop:
    http://www.microsoft.com/downloads/d...inityDownloads
    2. Please go to the Desktop and double click the downloaded file.
    3. Please select the C:\Windows\System32 folder as the Destination Folder
    during the installation. Later we will use this tool to reset the permission
    settings on the current machine.
    Note: If UAC (User Account Control) window is prompted for permission to
    continue, please click Continue.
    4. Click the Start Button, in the Start Search bar, type: "notepad" (without
    quotes) and press Enter.
    5. Copy the following commands and then paste them into the opened Notepad
    window:
    @echo off
    subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f
    subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f
    subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f
    subinacl /subdirectories %SystemDrive% /grant=administrators=f
    subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=system=f
    subinacl /subkeyreg HKEY_CURRENT_USER /grant=system=f
    subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=system=f
    subinacl /subdirectories %SystemDrive% /grant=system=f
    @Echo =========================
    @Echo Finished.
    @Echo =========================
    @pause
    6. After pasting the above commands, please close the Notepad window. Choose
    Save when you are prompted to save the file. Type "reset.bat" as the file
    name and choose Desktop from the left panel as the save location.
    7. Refer to the Desktop and right click the reset.bat file, then choose "Run
    as administrator."
    8. You will see a DOS-like window processing.
    NOTE: It may take several minutes, please be patient. When it is finished,
    you will be prompted with the message: "Finished, press any key to continue".
    Step 2: Reinstall Windows Update Agent 3.0
    ===========================
    1. Please download the file from the following link:
    Windows Vista (32bit)
    http://download.windowsupdate.com/v7...gent30-x86.exe
    Windows Vista (64bit)
    http://download.windowsupdate.com/v7...gent30-x64.exe
    2. Save the file to D: drive.
    Note: Please select a drive where Windows Vista was not loaded because the
    file cannot be launched directly from the system root directory.
    3. Click Start->Run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce"
    (without quotations) and then press Enter to install the Windows Update
    engine.
    Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and
    "/wuforce"
    Now, let's run Windows Update again.

  • Install error #1620 PrPro Windows Vista Home Premium

    Install error 1620  when attempting to install CS4 "This installation package could not be opened"  (for each component of the software package).   Windows Vista Home Premium 32 bit, Intel i7 processor.   Unable to install any components of PrPro.  This is after a clean install of Vista Home Premium (part number x12-24171-01)with discs provided by microsoft.

    I would never install a new OS over the top of what is there... wipe/format the hard drive and install fresh
    Also, if you have a 64bit computer with more than 4Gig of ram, think about the 64bit version of Win7
    CS4 can't use more than about 3Gig of ram, but if the OS can use more to run better... that is what I would do
    Just be aware that you should still run CS4 in WinXP compatibility mode, as I posted before
    Also read the article below... I have NOT done this, but it seems to be an easy process
    http://windowssecrets.com/newsletter/clean-install-windows-7-from-the-upgrade-disc/

  • Jrew.exe error while installing oracle9i on windows vista home premium

    Hi,
    While installing oracle 9i database on windows vista home Premium editon i get Error jrew.exe has stopped . Can anyone help me to proceed with the installation.
    Thanks
    Sree

    Duplicate post:
    Error JREW.EXE stopped working  while installing oracle 9i on windows vista
    (Unfortunately nothing has changed in the last 30 minutes).

Maybe you are looking for

  • MAC MINI + HP LASERJET = printing problem

    Why does my HP 2100M LASERJET only print the first job? It'll print the document in seconds. But when I try to print a 2nd job a few minutes later, it will not print. The PRINT MONITOR will STOP the job after a few minutes so I will have to click STA

  • Product Variants in CRM from R/3

    Hi Everybody, As you know that Product variant in CRM is material variant in R/3. A material variant is created when the available item is in stock. Scenario. I created a configurable material 'KMAT' in the material master in R/3 system . In the basi

  • How do I assign a song as ringtone?

    I don't have an iphone yet, but am finding out things about it before I buy.  Such as, how do set a song as a ringtone. I have a TV Theme on my other phone at the moment.  I go into Music, Click menu, and Assign as Ringtone. Or go into profiles, and

  • How to get XLIFF from FOProcessor API?

    I have RTF templates that need to be translated into multiple languages. When I test the XLIFF files from Word using Translate Template -> Preview, the translated strings are put into the document. The XLIFF translations also work on forms installed

  • "Abobe AIR Application Installer" is damaged and can't be opened.

    I went just downloaded ADOBE AIR and when I try to use it to install one of my Apps I get the message, "Abobe AIR Application Installer" is damaged and can't be opened. Can someone please address this. Thank you, Dr. Alan