PS CS4 - Hand tool/panning lag after updating OS to Mavericks

I'm on an iMac, from early 2009. With a 2.66 GHz Intel Core 2 Duo processor, and 4 GB 1067 MHz DDR3 memory. I'm using Photoshop CS4, and ever since my upgrade to Mavericks the hand tool has a bad lag to it. I've tried updating Java runtime, disabling/enabling OpenGL Drawing, flick panning with no luck. What's happening? I'd really prefer not to reinstall Photoshop, but it's slowing my work down so much that I'm almost willing.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

  • Illustrator (CS 5.1) crashes after update to OSX Mavericks (10.9)

    Illustrator 5.1 crashes while starting the app after update to OSX Mavericks (10.9)
    What can I do?

    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault boot volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. Never install crapware such as "CleanMyMac" or "Cocktail."
    *The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

  • Stream video doesn't work properly  after update to OS Mavericks

    after update to OS Mavericks stream video doesn,t work properly!!!  doesn't loaded stream video and stream audio from web sites (youtube, or other with stream video).

    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        http://get.adobe.com/flashplayer/?PID=7105813 
        Follow the prompts.
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
        Press " Manage Website Settings" button for more options.

  • How do I reset Cursor not Hand tool on Adobe X on mac with mavericks?

    Adobe just started defaulting to hand tool in Adobe X on mac with mavericks.  How do I get my cursor back??

    Hi glbalwarmth,
    Acrobat / Reader opens with whatever tool that was selected when it was last closed.
    Try the following step and let me know if it worked for you :
    Go to > Acrobat > Preferences >Accessibility
    In the section marked 'General', De-select the options 'Make Hand tool select text & images' and 'Make Hand tool read articles'
    Quit Acrobat.
    Reopen and check.
    Regards,
    Rave

  • Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

    After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

    but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
    Instead they are greyed out now.
    attached screenshot:
    Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
    Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
    created by Chris Cox in Photoshop General Discussion - View the full discussion
    If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
    So what you're describing is perfectly normal.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Hi, i hv macbook mid 2010 ..it was working fine till few days back but after updating it to mavericks, it keeps on shutting down itself...what to do ? could sm1 help me out ?

    hi, i hv macbook mid 2010 ..it was working fine till few days back but after updating it to mavericks, it keeps on shutting down itself...what to do ? could sm1 help me out ?

    The startup disk may need repairing...
    Startup your Mac while holding down the Command + R keys.
    From there you should be able to access the built in utilities in OS X Recovery

  • Turning off Hand tool Panning

    Is there a way to turn off the panning movement after you let go of the space bar when using the hand tool? I find this really annoying when I am moving quickly on a project. Im moving a file around and let go of the spacebar and the page keeps moving arcoss the screen. Is there an option for turning this movement off?

    Uncheck "Enable Flick Panning" in the Preferences.

  • Lagging after update to iOs7

    After update to iOs7, I found lagging on Pages. It slow down when I type, delete character and adjust table border. And the documents I have made in iOs6 change. Page format was changed so I have to adjust the format every document. Is it need some update of Pages too? But I can't found any update on AppStore. I use version 1.7.2(753).

    What sort of visa card, debit or credit ? As far as I know debit cards are no longer accepted as a valid payment method.
    And what happens when you try to buy something, does the 'buy' button not work, do you get any error messages ... ?
    If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
    If it's a different problem ... ?

  • Hand Tool Getting stuck after using spacebar shortcut

    I have dumped the PS prefs, zapped the PRAM, fixed the permissions. It will work fine for a few minutes and then get stuck again. Even when retarting PS, the problem the hand tool is still stuck. It takes a complete reinstall to get it go back to other tools, then gets stuck again after several minutes of use
    I'm on a Mac running Lion 10.9 with a Cintiq monitor. This had never been an issue until  I installed CC.
    It's driving me nuts. I cannot work in any productive manner.

    All I can say is that we see a lot of Cintiq problems on this forum, and don't generally come up with answers.  I'd say you are better going to eh Cintic forum on the Wacom site
    http://forum.wacom.eu/

  • Tool Palette issue after updating Photoshop CS5 to version 12.0.2.

    When leaving or hovering the mouse cursor over the Tool Palette in Photoshop usually a small window appears to indicate the name of the tool and keyboard shortcut. However, after updating Photoshop CS5 to version 12.0.2 the small window shows but it is now a blank space. I have uninstalled and re-installed Photoshop CS5 and updated again and this problem persists. Now I wish that I should not have updated from version 12.0.1. Do any other Photoshop CS5 users are seeing this problem?
    p.s The Tool-Stack window works fine, when clicking the mouse for a second, and tools are selectable.
    The operating software I am using is Windows XP Pro 32 bit.

    This is a known problem with the update, and Adobe is working on it.
    Please see the thread on tooltips, also current in this forum:  http://forums.adobe.com/thread/762392?tstart=0
    -Noel

  • Tools Palette issue after updating Photoshop CS5 to version 12.0.2

    After updating Photoshop CS5 to version 12.0.2 the Tool Palette is having an issue. Normally when leaving or hovering the mouse cursor on the Tool Palette in Photoshop a small window appears to indicate the name of the Tool and keyboard shortcut. Now this small window shows but the space is blank.
    I have uninstalled and re-installed Photoshop CS5 and again updated but this problem still persists. Now I wish that I should not have updated from Photoshop CS5 version 12.0.1. Do any Photoshop CS5 users have seen this bug with their product? Is it possible to downgrade Photoshop CS5 to version 12.0.1?
    p.s The Tool-Stack window, when clicking the mouse and holding for a second on the Tool Palette, opens and shows all the corresponding Tools that can be selected and to be used.
    I use Windows XP Professional 32 bits as operating software.

    This is a known problem with the update, and Adobe is working on it.
    Please see the thread on tooltips, also current in this forum:  http://forums.adobe.com/thread/762392?tstart=0
    -Noel

  • Why is my ipod lag after updating it to ios 7

    Why doesn't my IPod run smoothly when i play game with it after updating it to ios 7? Is there

    Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory.
    Next for liiely more inprovements
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             

  • Can't upgrade iPhoto after update os to mavericks

    After update os mountion lion to mavericks I can't open iPhoto also its not in lunchpad and applications
    when I try to upgrade iPhoto give this error :
    "These apps were already assigned to another Apple ID, and they will be available in that Apple ID's Purchases list. If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the applications."
    "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
    "There was an error in the App Store. Please try again later. (null)"

    Log in using the Apple ID that was used to purchase iPhoto (or used to set up the computer if it came on the computer). Other than that contact App store support  the link is on the right od the App store window
    LN

  • Mac Apps store problem after updating it to Mavericks

    I have a problem with my mac apps store. after updating it to OS X 10.9.3 (Mavericks) when i restarted it and open it up again the mac apps store keeps on hanging and i can't see anything. I cannot update any of my application because i cannot access the store. Please help me. My computer is Mac mini 2.3GHz quad-core intel core i7

    Launch Activity Monitor in /Utilities, select all processes, check for app store ones, select them, and force quit them.

  • After Update to OSX Mavericks 10.9.2 Apps are malfunctioning

    Hello,
    I recently updated to OSX Mavericks 10.9.2 and i've been having difficulty.
    The Following Native applications are not opening at all.
    Mac App Store
    Facetime
    Photo Booth
    Preview
    Terminal
    Quicktime Player
    Any Solutions?
    Will be greatly appreciated.
    Thanks!

    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault boot volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. Never install crapware such as "CleanMyMac" or "Cocktail."
    *The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Maybe you are looking for

  • Error in report painter with change versión

    Hy everybody I have a problem with report painter. we are an upgrade from 4.7 to 6.0. The reports created in the previous version work correctly and show all data in columns, but in version 6.0, that is not equal to run the same reports they do not s

  • Can I use an older aple desk top, about 5 or 6 years old as a monitor for a new apple laptop

    Am I able to us a 5 or 6 year old desktop apple as a monitor for a new apple laptop?

  • Can't sync my contacts with iPhone 3G since started using iCloud

    Hey guys I have an iPhone 4 and an iPhone 3G. before iCloud, I used to sync both of them with my mac and everything would work like a charm. but since iCloud's running and I'm backing up my iPhone to my iCloud account, everything's ok between my iPho

  • [SOLVED] cannot install from AUR

    as I was updating a kernel from AUR, I lost power during the build and now aurget, packer, and yaourt doesn't seem to work... these are the errors with an example of each: $ aurget -S calf-git searching AUR... Targets (1): calf-git-20100827-1 Proceed

  • EHP4 installation error

    Hi everybody. We are running an EHP4 installation in ECC 6.0 using EHPI installer. At pre-proccesing phase, when installation is activating abap objects we receive an error because it is not possible to connect sap gateway of service sapgw11 (11 is t