PS CS4 how to resize my workspace for a smaller monitor

I've been forced to downsize to a smaller monitor for my Mac Mini. Is there a way to resize the workspace in PS CS4? I can't access the sliders at the bottom and the right side because they are in a space which bleeds completely off the screen.

There are two approaches I know of, one is almost effortless... if the file is for a web site, just keep the file as is and in the web page set the dimensions to those desired.
The alternative can involve significant effort depending on your design complexity... you need to resize the stage and all the content as needed (possibly piece-by-piece and relocate things.
I do not know if the newest releases of Flash provide for a quicker solution to this problem.

Similar Messages

  • I can't figure out how to resize my picture for my home or lock screens.

    I can't figure out how to resize my picture for my home or lock screens. It shouldn't be his difficult. Any suggestions? I'm running the latest software. Thanks.

    whichever app store you are connecting to, hyou need a credit card with an address in that country. Also, itunes gift cards must be in local currency too.
    If you are in japan, you need to use the japan app store

  • I have created a newsletter in indesign cs4 how can I set zooms for each article for the user

    I have created a e-newsletter in Indesign. I have successfuly saved it as a SWF then as a PDF from acrobat.
    The problem is that when the user zooms in the resolution is not good.
    How can I let the user zoom in to read each article. Would I create buttons with zoom settings for each article. If this is the case do I do it in Indesign or Flash and can I still save it as a PDF file and it will keep the interactivity?
    I would greatly appreciate any help with this issue. It is driving me mad trying to get the information I need.
    Thank you

    Hi Bob
    Dont know what you mean by deleting my signature in the forum. Sorry its my
    first time using a forum.
    So just to confirm if I want a user to zoom in on an article I can't do it
    in Indesign or Flash.
    cheers
    PAMELA
                                                                                    BobLevine                                                    
                 <[email protected]                                            
                 >                                                          To
                                           pamela hettrick                    
                 17/08/2010 14:09          <[email protected]>  
                                                                            cc                                                                               
    Please respond to                                     Subject
                 clearspace-143433         I have created a        
                 1873-767197-2-305         newsletter in indesign cs4 how can 
                 [email protected].         I set zooms for each article for   
                     adobe.com             the user                                                                               
    You don't. There are third party solutions available for that. Sorry but I
    don't have any links handy right now.
    And please delete your signature...it's making a mess of the forum display
    of your posts.
    Bob

  • CS4-How to create a shortcut for media browser icon clean up function?

    Hi again.
    I recently upgraded my system, now running CS4 suite in Window 7 - 64bits. This to be able to manage AVCHD files within premiere.
    I'm just starting to work with it and I'm missing the ability to create a shortcut for this function I had in PP2 cs2. I did go to the recommended reading before posing my question. There the most appropriate area I could find was about Bins Behaviours, at least I thought it was, and there was nothing in it.
    I have gone to Edit / keyboard  customization then each of the 3 choices, application, panels and tools. but could not see "Clean Up"
    I hope someone has an answer for me as I like to use this panel as a story board and use this function often and thank those who will try to help me.
    (I'm pleased that my avchd files are now coming nicely on the timeline!)_

    Is this what you are looking for?

  • Satellite M50-156: How can I change resolution for my external monitor?

    Hi,
    I bought an exernal monitor for my laptop M50-156 which has a resolution of 1920x1080.
    But the problem is that such a resolution is not available in the display settings of my computer!
    I tried to update the graphic card and chipset, but the max resolution I have is 1280x1024!
    So my external monitor cannot display properly :( Did anybody have the same problem?
    Please help.. Thanks.
    Beb

    > But the problem is that such a resolution is not available in the display settings of my computer!
    The resolution is not available and this says everything!!! Its not possible to choose this and you will have to use another resolution!
    There are two reasons why your favorite external resolution is not available:
    1) the graphic card chip does not support this
    2) or the graphic card driver does not contain this resolution.
    In your user manual you can find all supported and available external resolution
    But I assume the 1920x1080 is not supported

  • How to keep Anchor links for all small piece of Images in a BIG Image?

    Hey,
    I have a Bigger Image, in which I have some number of Images (created it through Fireworks)..
    Now I need a links to all those piece images
    For more info: pls check my actual thread here: http://forums.adobe.com/message/4695100#4695100
    Hoping for quick soln..
    Thanx!

    HI,
    I just did what mentioned in that link, i was able to create an image with links..
    BUT my requirement is quite different:   Iam using Nivo Slider JQuery Plugin in which Iam thinking to place an Images in which it displays some 3 products in each images.. so If I place 3 images, it means it displays 9 products (3 products in each Image).. that means, there should be 3 differnt anchor links in each image and total 9 anchor links for 3 images.
    I guess iam clear.. BUT iam not sure whether this is POSSSIBLE practically or not..
    COuld you please suggest whether this is possible or not..?
    FYI, here is a  jqurey plugin you can get freely: http://nivo.dev7studios.com/
    I will be glad if anyone helps me out in this..
    Thanks!

  • Workspace for java in APEX  ?

    Hi, am new to APEX and I got a new workspace for 10 MB and am working in SQL, PLSQL in my workspace in Apex. Also for my apex workspace I got a message that it will expire in 10 days, is that so?
    Can i work in Java, as i wanted to practice Java and do a sample project. I hope Apex will be of great help in this regard. Can someone suggest me how to get a workspace for Java start my sample projects.
    Thanks
    Ambika

    perhaps you want to google:
    http://www.google.com/search?hl=en&q=jgrasp&btnG=Search
    perhaps you want to read the getting started:
    http://www.cs.unc.edu/~wardk/Comp14/jgrasp.html

  • Setting up bridge as photo database for a small company

    My company is using a quite large collection of stock photos. Those photos are currently saved in appropiately named folders, however it's quite hard to find a specific type of photo this way. That's why we want to start using bridge for the management of our stock photos.
    I searched the internet for tips on how to do it, however most of the threads are really old (we are using CS 5.1) or not very helpful.
    That's why I hope the adobe community can give me some advice on how to set up bridge for a small company network (~20 people).
    What we want to achieve:
    Bridge uses the stock photo folder located on our server
    All photos have tags, if someone changes a tag the other users also see the changed tag
    If a new photo is added to the server, it shows up in the bridge of all users
    Not everyone in the company is using macs -> everything should work cross-platform, also for the windows users
    Not essential but would be pretty helpful: Since 90% of our photos are from iStock, a way to read the tags from iStock and insert them into our photos.
    I know that there are other programs which are better suited for the management of photos, however we want to rely on an Adobe product for it and since Lightroom does not seem to be a good choice, we look forward to using Bridge.
    Maybe someone else in here also uses bridge for the photo management in their company or knows how to set it up for a network. If so, I would be very grateful for an answer!

    Curt
    how do you know if your using the
    Central cache all distributed cache ?
    and are they both stored in the same place ?

  • We have version 10.5.8 photoshop CS3 for Mac. How do we fix a problem with photoshop not resizing dpi? For example we resized a 72 dpi image to 200 dpi, when we do a pdf analysis it read as 344 dpi.

    We have version 10.5.8 photoshop CS3 for Mac. How do we fix a problem with photoshop not resizing dpi? For example we resized a 72 dpi image to 200 dpi, when we do a pdf analysis it read as 344 dpi.

    Sounds like it's a problem with the Acrobat settings. Did you set them to the same resolution?

  • When I open a file in Photoshop CS4, how can I resize My Open Window File?it is stuck on full screen

    When I Open a File in Photoshop CS4, How can I Resize My Open Window File? It is stuck on Full Screen?

    Which operating system are you using?
    On a windows os, usually one can just double click on the title bar in the open dialog.

  • How to increase page size for balance file upload in Workspace.

    Hi All,
    Please suggest how to increase page size for balance file upload in shared Workspace pages.
    Thanks,

    A word of caution is in order regarding changing from facing to non-facing and back again. If you have overridden master page items, you'll get a second, non-overridden copy on all the even-number pages when that half of the master page is re-applied. This applies to master text frames which override automatically when text flows into them as well as to objects you manually override. I think you'll find this particular technique also only works for master text frames, whereas the Layout Adjustment should work in all situations where frames snap to guides.

  • Premiere CS4 - How can you import QuickTime (.mov) videos and which settings for the sequence?

    Premiere CS4
    How can you import QuickTime (.mov) videos and which settings for the sequence?
    Please reply in plain English or if possible in German
    Greetings from Vienna, Peter

    I have not installed Quicktime.
    I got a few scenes (.mov) from a Canon Eos 70d.
    I want to create a short film (in Premiere CS4) with these scenes, mixed with photos and MP3 music.

  • How I resized the Small Image for a Product Module

    I wanted a big picture for my small product module.
    1. I inserted {tag_largeimage} in place of {tag_smallimage} on the small product module.
    Site Manager -> Module Templates -> Online Shop -> Individual Product Small.
    The picture was 200 X 275. It was getting cut off.
    2. I open File Manager -> CSS and look in style.css for numbers smaller than those dimensions.
    At the bottom, at lines 1594/1595 I found what I was looking for: "#content .shop-product-small .image".
    3. I increased the dimensions to 200*275. If your site is automatically generating a border you'll need to include them in the final dimensions.
    The customer gets a better view of what I'm selling. I'm happy with the result. I hope this helps.

    Hi Steve,
    You should just use the large product image, use _path to get the raw URL of the image and use the tumbnail generation code (see knowledgebase) and specify your dimensions. This allows you to use then properly use a large product image in your detail view

  • How to use swf file for Spark Skin

    Hi all
    I have little confuse about how to use swf file with Spark Skin,
    in Flex3 , i use Flex Skin Design Extension for Flash to deal with skin ,
    so basically , I just create a swf file and import to the project , then everything is ok
    but , seem that not working in flex4 , spark skin.
    1` I can't find the Flex Skin Design for the FlashCs4
    2` I try to use FlashCs3 version to import the skin art to the project , but seemed not working.
    3` I Google and check the Flex4 Help , seemed Spak skin need the Skin-Class , which I don't know how to use that with swf file
        what I have searched is how to use FXG , or some jpg file in that skin class, none of them are use swf file.
    so , is there any way that let user use the swf file to deal with the skin?
           is the Flex Skin Design can use in Flex4?
    Thanks

    Hello,
    I'm new to Flex, but have come to it from Flash Pro.  I'd like to know the same thing.  I think I found the answer here:
    http://www.flashallys.com/blog/spark-button-skinning-with-flash-symbols/
    However my question is now: Is this a good approach to use?
    99% of the googling I've done tells me to skin components with fxg files.  I've tried that by creating graphics and exporting from flash, but using swfs containing lots of graphics is much faster so I'd rather use that.
    The other thing I've done is to create custom components using these helpful tutorials:
    Creating component in flash:
    http://www.webkitchen.be/2008/12/12/video-tutorial-make-flex-components-with-flash-cs4/
    Dealing with Resizing with method overrides for your flash component:
    http://www.psyked.co.uk/flex/creating-flex-components-the-easy-way-for-flash-ide-converts. htm
    This allows me the flexibility of Flash Pro design with the layout, transistions, data binding etc from Flex.
    So my question is: Is this approach (skinning spark components with swfs, and using custom swc components made in flash) a bad idea for any reason?  E.g. does it create slow mobile apps?
    Cheers
    Chris

  • APEX SSO and Load balancing: Could not determine workspace for application

    We had a single HTTP Server serving APEX in a 10.2.0.2 database configured with SSO to be used by the developers. APEX has been registered as a partner application and the login url has been CA Siteminder protected so that the SM_USER details are forwarded in the header for the application to use for authorization. Everything is fine so far.
    Now we have added a HTTP Server on another host and have it all set up for APEX and its pointing to the same database. APEX_ADMIN access works as normal, but applications previously using SSO now get the following error after entering the URL.
    Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
    Error ERR-7620 Could not determine workspace for application ().
    Using HTTP Watch I find that the application is not even trying to redirect to the login page.
    What is wrong here?

    APEX has been registered as a partner application as described in
    http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html
    In the meantime I found metalink document 368746.1 which describes the cause of this problem. Please read carefully what I wrote, it all works when the the new APEX web server is turned off in the server farm on the load balancer and directed through the original web server. When running regapp.sql the hostname in the listener token was using the virtual hostname. This works fine if the request comes from the original APEX server which proofs that there is nothing wrong with the installation and set up of SSO. When directing the request to the new APEX web server the APEX_ADMIN page still works only existing work spaces using SSO don't seems to work anymore resulting in a error as described in the subject.
    As for metalink document 368746.1 naming the causes of this error:
    - there are no duplicate entries in WWSEC_ENABLER_CONFIG_INFO$
    -LISTENER_TOKEN clearly works for requests coming from the first web server
    -theoretically the web server listener port could be changed from 7777, but port 80 needs to be maintained here as production is mimiced as far down as possible.
    Is there some cache table which can be cleared? How is it that the flows schema (apex engine) can not find the work space when the request comes from a new web server which can however access the APEX_ADMIN pages.
    anyone?

Maybe you are looking for