PS cs4 went bad - replacing with PS Elements 11
should I remove the PS cs4 app. I copied the pics that were in it.
cs4 went bad? reinstall it, why buy a lesser program? But if your question was can you have them both on, then yes you can install both software. But if you no longer need cs4 then indeed uninstall it.
But cs4 is more advanced than elements. You will be able to do more with it
Similar Messages
-
Can ActionList in MD form be replaced with other elements(buttons?)
Hi,
At Re: # of tab canvases dependant on the # of groups that come back from a query in the entry of April 18,2001
I found the following answer to my question:
"Sorry, this is not supported yet. You cannot hide ActionList and you cannot replace it with any other elements."
Is this still true?
If not, how can I replace ActionLists of both blocks in Master/Detail form with buttons Update, Insert, Delete?
Thank you very much in advance.
Galina.I'm not sure why you don't think an event structure won't work but if you're not comfortable doing that, you can simply remove your Booleans from the cluster and build them into an array. You're converting the cluster to an array and doing a search of the array to see which button is true so why not skip the initial cluster part. I think you could also skip some or all the writing to the cluster with a local variable if you used a different mechanical action for the buttons.
-
Why did my charger from Verizon already go bad..bought another one and it went bad..now the phone will not charge..what a disappointment and a hassle..should have stuck with Apple..only had the phone 2 months. Hope they will exchange it!!!!!!!!!!!!
This is either a Phone issue or an Electrical issue in your home.! when charging Do you always use the same electrical outlet? or did you try others..
You will know or should know if there are any issues with your other Electronics.. that you Plug into it..
If it is the s5 which it sounds like it could be then the Local Verizon store at there Discretion will determined if replacement is needed you have a 1 year Manufactures Warranty that covers for things like what your Describing I would take it too your local store see if they'll get you a Replacement or you may have to go through Samsung..
But I would Try another OUTLET just to see if your phone charges with it.. And Good Luck b33 -
BEA-382513: OSB Replace action failed: bad value for type element anyType
Hello, in OSB I get this strange error message on my XQUERY TRANSFORMATION.
*<faultstring>BEA-382513: OSB Replace action failed updating variable "response":*
com.bea.wli.common.xquery.XQueryException:
*Error parsing XML: {err}XP0006: "*
*element {http://xmlns.oracle.com/pcbpel/adapter/db/top/CS2AdapterSelectOffenePosten_v0_5}Cs2DebitorOpVieCollection*
*{ {http://www.w3.org/2004/07/xpath-datatypes}untypedAny }":*
bad value for type element
*{http://xmlns.oracle.com/pcbpel/adapter/db/top/CS2AdapterSelectOffenePosten_v0_5}cs2RechungungenResponse*
*{ {http://www.w3.org/2001/XMLSchema}anyType }*
*</faultstring>*
I'm a pl/sql developer and I have no idea what this error message is telling me.
In this forum I'v read someting about a wrong namespace declaration. I can't see any wrong value on my xml (ok, I'm not the specialist here...)
Maybe someone of you xquey cracks might have a look at my code?
This is what I have:
_1.) a XQuery variable called cs2RechnungenResponse with this content:_
<cs2:Cs2DebitorOpVieCollection
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:cs2="http://xmlns.oracle.com/pcbpel/adapter/db/top/CS2AdapterSelectOffenePosten_v0_5">
<cs2:Cs2DebitorOpVie>
<cs2:f40Konto>333</cs2:f40Konto>
<cs2:AMT_BEZEICHNUNG>Amt für Gesundheit</cs2:AMT_BEZEICHNUNG>
<cs2:f40Belnr>555</cs2:f40Belnr>
<cs2:f40Sohab>S</cs2:f40Sohab>
<cs2:f40Dmbet>100</cs2:f40Dmbet>
<cs2:f40Fadat>2011-05-05T00:00:00.000+02:00</cs2:f40Fadat>
<cs2:f40Valut>2011-05-05T00:00:00.000+02:00</cs2:f40Valut>
<cs2:f40Mahns/>
<cs2:f40F40Sj>0</cs2:f40F40Sj>
</cs2:Cs2DebitorOpVie>
</cs2:Cs2DebitorOpVieCollection>
_2. a xquery with this code:_
(:: pragma bea:global-element-parameter parameter="$cs2RechnungenResponse" element="ns2:cs2RechnungenResponse" location="../adapters/cs2_adapters/xsd/CS2AdapterSelectOffenePosten_v0_5_table.xsd" ::)
(:: pragma bea:global-element-return element="ns0:getDebitorRechnungResponse" location="../../interfaces/RechnungServiceTypes_v0_6.xsd" ::)
declare namespace ns3 = "http://www.llv.li/common/types/v1";
declare namespace ns2 = "http://xmlns.oracle.com/pcbpel/adapter/db/top/CS2AdapterSelectOffenePosten_v0_5";
declare namespace ns1 = "http://www.llv.li/fin/types/v1";
declare namespace ns0 = "http://www.llv.li/fin/services/rechnungService/v1";
declare namespace xf = "http://tempuri.org/fin_sb/RechnungsService/transformations/CARI_CS_2DBAdpter_to_RechnungsServiceGetOffenePosten_v0_5/";
declare function xf:CARI_CS_2DBAdpter_to_RechnungsServiceGetOffenePosten_v1_0($cs2RechnungenResponse as element(ns2:cs2RechnungenResponse))
as element(ns0:getDebitorRechnungenResponse) {
<ns0:getDebitorRechnungenResponse schemaVersion="0.6">
if ($cs2RechnungenResponse/ns2:Cs2DebitorOpVie) then
<ns0:debitorRechnungList>
for $Cs2DebitorOpVie in $cs2RechnungenResponse/ns2:Cs2DebitorOpVie
return
<ns0:debitorRechnung>
<ns1:peid>0</ns1:peid>
<ns1:rechnungsnummer>{ data($Cs2DebitorOpVie/ns2:f40Belnr) }</ns1:rechnungsnummer>
<ns1:rechnungsdatum>{ xs:date(fn-bea:remove-timezone-from-dateTime(data($Cs2DebitorOpVie/ns2:f40Fadat))) }</ns1:rechnungsdatum>
<ns1:faelligAm>{ xs:date(fn-bea:remove-timezone-from-dateTime(data($Cs2DebitorOpVie/ns2:f40Valut))) }</ns1:faelligAm>
<ns1:behoerde>{ data($Cs2DebitorOpVie/ns2:AMT_BEZEICHNUNG) }</ns1:behoerde>
<ns1:positionList>
<ns1:position>
<ns1:positionsnummer>1</ns1:positionsnummer>
<ns1:betrag>{ data($Cs2DebitorOpVie/ns2:f40Dmbet) }</ns1:betrag>
<ns1:waehrung>
<ns1:isoCode>CHF</ns1:isoCode>
<ns1:bezeichnung>Schweizer Franken</ns1:bezeichnung>
</ns1:waehrung>
</ns1:position>
</ns1:positionList>
<ns1:status>offen</ns1:status>
if ($Cs2DebitorOpVie/ns2:f40Mahns/text() > "") then
<ns1:mahnstufe>{ xs:int(data($Cs2DebitorOpVie/ns2:f40Mahns)) }</ns1:mahnstufe>
else ()
</ns0:debitorRechnung>
</ns0:debitorRechnungList>
else ()
<ns0:resultatStatus>
<ns3:code>Erfolgreich</ns3:code>
<ns3:beschreibung>Rechnungen aus MFK fehlen</ns3:beschreibung>
</ns0:resultatStatus>
</ns0:getDebitorRechnungenResponse>
declare variable $cs2RechnungenResponse as element(ns2:cs2RechnungenResponse) external;
xf:CARI_CS_2DBAdpter_to_RechnungsServiceGetOffenePosten_v1_0($cs2RechnungenResponse)
_3. this should result in this response, but it doesn't_
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Body xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<v1:getDebitorRechnungenResponse schemaVersion="0.6" xmlns:v1="http://www.llv.li/fin/services/rechnungService/v1">
<v1:debitorRechnungList>
<v1:debitorRechnung>
<v11:peid xmlns:v11="http://www.llv.li/fin/types/v1">333</v11:peid>
<v11:rechnungsnummer xmlns:v11="http://www.llv.li/fin/types/v1">555</v11:rechnungsnummer>
<v11:rechnungsdatum xmlns:v11="http://www.llv.li/fin/types/v1">2011-05-05</v11:rechnungsdatum>
<v11:faelligAm xmlns:v11="http://www.llv.li/fin/types/v1">2011-05-05</v11:faelligAm>
<v11:behoerde xmlns:v11="http://www.llv.li/fin/types/v1">Amt für Gesundheit</v11:behoerde>
<v11:positionList xmlns:v11="http://www.llv.li/fin/types/v1">
<v11:position>
<v11:positionsnummer>1</v11:positionsnummer>
<v11:betrag>100</v11:betrag>
<v11:waehrung>
<v11:isoCode>CHF</v11:isoCode>
<v11:bezeichnung>Schweizer Franken</v11:bezeichnung>
</v11:waehrung>
</v11:position>
</v11:positionList>
<v11:status xmlns:v11="http://www.llv.li/fin/types/v1">offen</v11:status>
</v1:debitorRechnung>
</v1:debitorRechnungList>
<v1:resultatStatus>
<v11:code xmlns:v11="http://www.llv.li/common/types/v1">Erfolgreich</v11:code>
<v11:beschreibung xmlns:v11="http://www.llv.li/common/types/v1">Rechnungen aus MFK fehlen</v11:beschreibung>
</v1:resultatStatus>
</v1:getDebitorRechnungenResponse>
</soap-env:Body>
</soapenv:Envelope>
But I do not get this expectet result, all I get is the BEA-382513: OSB Replace action failed: bad value for type element anyType?
Any help would be appreciated.
Thanks
Best regards
rkcs2RechungungenResponse or cs2RechnungenResponse ? the error message says cs2RechungungenResponse, but the actual element is cs2RechnungenResponse (one less "u")
-
I had an iphone that would not work and they sent me a replacement. I have everything set up the same as my last one except that now on the screen it registers 373 on the mail button. I don't have any mail in my mail box. Everything is cleaned out but it still registers 373 on the front of my phone. How do I get this to go back to normal?
If your email account offers a webmail access, I suggest checking the webmail - log in to your account using the webmail access, and I predict you will see all those "unread" emails there and can dispose of them from there.
This happens because the iPhone that went bad, when reading those emails, did not remove them from your email provider's servier. -
I have an iMac model 4,1 running OSX 10.6.8. The CD/DVD drive went bad and I have replaced it. However I can not get disks to eject. I have asked about this before and tried all all the suggestions I have received but I can not eject.
Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem. I still can not eject. When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
How do I solve this problem?Hi again Hal
Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
You have also tried resetting the PRAM as I suggestion in your other thread...?
See resetting the PRAM > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys. -
The external drive with my photo library went bad, but I have the photos on my ipad, ipod and iphone. How to I get those photos back into iphoto on my macbook?
Are the photos you want to send back to your mac on your iPad, iPod, iPhone saved to the camera roll? If you have photos in other albums (not camera roll) share them to the camera roll.
Then connect your device via USB and lauch iPhoto. You will see your device as a camera in iPhoto. Import those photos like you would import from a camera. -
IPhoto With Adobe Elements Or CS4
I'm trying to use iPhoto with Adobe Elements (and/or CS4) as my default editor.
I have the files in RAW / NEF format and I click to edit in external editor.
My goal is to save the changes I've made back into iPhoto (overwriting my old version) without saving it as an external file and reimporting it in.
I read on an IPhoto site this;
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
Unfortunately, this doesn't seem to work.
When I save the file, it saves a JPEG version in the iPhoto directory, but it doesn't show up when I go back to iPhoto. I'm also wondering why I can't save it back as a NEF file (shouldn't I do that since it's a RAW image to start)?
What's the proper way to work with iPhoto and Photoshop?
I know there are purists that seem to push to use Bridge, but i've grown to like iPhoto's features, tagging, etc. How can I do this?
Thanks..This might be of some help:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full sizes
I also suggest the Maximize PSD File Compatabilty be set to Always.
In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
NOTE: If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds.
OT -
The Radeon X1900 XT video card went bad in my Mac Pro Dual-Core Intel Xeon. (I tried it with a good one at the office). I found one online that was $250. I don't need the gaming capacity of this card and was wondering if there were less expensive video cards that I could use in this machine. I run Adobe Creative Suites for graphics design and have a 23" Apply display. Thank you for any help that you can provide. -PretzelMcK
Then pick up the ATI 5770 AND upgrade to 10.6.8.
Same price for a good card that will work and helps to have 1GB VRAM.
There aren't any other real choices let alone less expensive.
Even the ebay links I had and not a lot of choices. -
Editing Premiere cs4 project with premiere elements 9?
Can I open a premiere cs4 project with premiere elements 9 to edit it.
Thanks in advanceYou are most welcome, though it's probably not the answer that you wanted.
There are just so very many differences between the two programs. As a test recently, I took a PREL from PrE 8, IIRC, and it would not even open in my PrPro 2.0, like my simple PrE 4 Projects would. That PrE 8 test Project was also simple, with no Themes, or Instant Movies - just Cuts and some common Transitions, no Effects. Just too different to Open.
Good luck,
Hunt -
Open a premiere cs4 project with premiere elements 9
Can I open a premiere cs4 project with premiere elements 9 to edit it.
Thanks in advanceI'm going to throw out a somewhat educated guess and say no. Despite the similar monikers, Premiere Elements and Premiere Pro are two different programs.
-
I have an early model Macbook Air. 1.6ghz duo core. The unit worked fine until the battery went bad! Now I tried using just the Power Brick, but it will not do anything. Question is, do I have to have a battery installed in this unit to make it operate? Please help!!!!
Clicked enter too early
Read this:
http://www.apple.com/batteries/replacements.html -
iPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines.
I found a video on youtube with similar issues - http://youtu.be/Xuuqxx18-bA
EVERYTHING HAS BEEN TRIED: Restore, Reboot, Recycle, Replacing Cables, etc....
I don't have Apple Care, what to do? Spend more money and buy a new phone?Here is another person who has a problem with the iPhone 5 screen https://www.youtube.com/watch?v=sc1ZPWSA8dc and they have just received them NEW!!!!!
I myself, two days ago purchased a 2nd hand iPhone 5 that was advertised as having a line of squares at the bottom of the screen. I Googled it and found people saying it was a screen issue and to replace the screen, so I did this and it is still happening with a new screen.
I am starting to dislike Apple intensely after reading forum posts and watching videos where people are asking for help and telling us about issues that they are having with their phones.
Why is Apple getting it so wrong with their updates and manufacturing that they are completely destroying iPhones that cost a lot of money and then expecting the owner to purchase another phone unless they are still in warranty.
Apple you should be going out of your way to put things right for people but instead there is a wall of silence over so many of the issues destroying peoples phones.
SHAME ON YOU! -
Grey screen issue with 10.5 & 10.5.1 - bad experience with Leopard
Here's a quick overview of my bad experience with installing Leopard:
*1st attempt:* Upgraded Tiger 10.4.10, was greeted with the blue screen. This was an APE issue.
*2nd attempt:* Archive and installed above install. This is where the continuing issue first occurred. The issue being on the first or second reboot after a 'successful' installation, I get the grey screen and spinning gear loop. In verbose mode I see this recurring loop:
Mez com.apple.launchd[1] (com.apple.nDNSResponder |xxx|) : posix_spawnp("usr/sbin/mDNSResponder", ...): No such file or directory
xxx = incremental value, it adds 1 each time the error cycles, which happens roughly ever 10 seconds).
Additionally, Disk Utility reports this error: Error: The underlying task reported failure on exit.
*3rd attempt:* Erase and install. Same issue as 2nd attempt occured.
*4th, 5th, 6th attempts:* Bought a brand new hard drive to replace the old one. This was an idea that was raised on another one of my threads. People thought I could have bad sectors. Tried upgrading and archive install from 10.4, no. Erase and install, no. Same issue as before.
*7th attempt:* Tried swapping out the RAM from a friends MBP (who has successfully upgraded to Leopard). No, same failure as before.
*8th attempt:* Tried using his Leopard disk. NO!
*9th attempt:* My last attempt so far... Erase and install, then applied the 10.5.1 update. It all went well, but it always has, until the point where I reboot. It successfully rebooted once, but to be sure all was fine (before using the migration assistant) I rebooted again... Oh what a surprise, it doesn't work anymore. Same enraging loop.
*Any new ideas people, I have faith that there is some genius out there who can provide me with a solution. I will love you forever if you can help me.*
*Quick question:* Do other people see the dialogue box that appears before the computer restarts...
"Updating Boot Caches - The Boot caches are being updated, the system will shutdown when this task is complete" (It's sort of along those lines. I don't have enough time to write down exactly what it says)??
Oh well, back to my newest backup (10.4.11).
*Fingers crossed for 10.5.2 :D*THANK YOU!!! At least preliminarily...
I've spent the last three hours researching and troubleshooting my greyscreen dilemma, and your post is the only one that seemed to work so far.
I installed Leopard 10.5 onto my G4 Dual 1.25 Mirror, successfully restarted after the install, then had glitchy problems including being unable to run Software Update or even run the Leopard Update after downloading it from the apple website. So I restarted the computer (after removing the Install DVD and shutting the drive door) and found myself stuck at the grey screen with the spinning ball.
Nothing worked. I couldn't do anything to get it to boot.
After researching, I booted into single user mode and ran mount -o rw,remount / # (from this thread: http://discussions.apple.com/thread.jspa?messageID=5796214�) and when I exited and it began to boot I saw it get stuck at mDNSResponder line prompt, repeating the line prompt every 5 seconds or so and never getting anywhere.
Then I found your post and changed permissions as you mentioned, exited and it booted up successfully. I then immediately ran Software Update and installed the Leopard 10.5.1 update and now all is well again.
Insane for this to be required. I barely know what single user means and would have sent this computer in to Apple if I hadn't found your solution.
Hopefully the next person who searches on this problem will find this and save themselves a horror story too. Thanks again.
Jeff -
What a disgrace Adobe with Photoshop Elements 13
I brought Adobe Photoshop Elements 13 trusting the garbage Adobe went on about it only to find you go and install it and it won't get pass Payloads Adobe Elements 13 Organizer it just fails as a small business I ended up trying to install it on 4 different computer using Windows 8 and 8.1 64 bit and nope the same thing happens I even trying installing the 32 bit program same thing you can not get pass Payloads Adobe Elements 13 Organizer as far as customer support it appears there is none you can't contact anyone at Adobe to get you money back they just don't care. I have gone back to using my old version Adobe Photoshop Elements 11 it works and no issues. I recommend no one buys Adobe Photoshop Elements 13 until Adobe fixes the issues and most of all provide the customers proper support. I wont my money back for a software program that is useless and I can't use. They say you have 90 days from time of purchase to request a refund well what a pack of lies that is as you CAN NOT GET ONTO ANYONE AT ADOBE if you do get on to some one they will tell you your 90 days has expired this is that they think of there customers world wide.
I'd rate Adobe 0 = for the program and I'd rate their customer service 0 and never buy another product from them.I agree with you about the lack of customer support. I was able to install it with no problems but when I wanted to print to one of my printers I had a lot of problems. I can only print to one of the printers and it won't print correctly. I contacted Support and chatted with one of the people. I was told that only the forums take care of Photoshop Elements. I also wish that I had stayed with Photoshop Elements 11. After installing 13 the printer issues are in my photoshop elements 11 program. I certainly would not recommend anyone purchasing an Adobe product because of the lack of support.
Maybe you are looking for
-
How Can I debug a Wle CORBA Server Program by JBuilder 5 Or other Java develop tool.
-
Problem with reader version 11.0.2 when it starts up and I open a file, All hangs for 30sec
I am using windows 7 on a 64bit laptop. When I open a file the sytem hangs for over 30sec saying 'program not responding' the wakens up and works fine till I open another file?
-
Is it possible to match Lockbox program with MICR and/or Invoice, PO , BOL
Hi , Could please someone let me know , in Lockbox program whether it's feasible to do the matching with the PO , BOL(Bill of Lading) other than the MICR and/or Invoice? Any help is highly appreciated and rewarded with the points... Thanks
-
I purchased music from Itunes on a PC several years ago. I am unable to locate my sounds in the ITunes library. Where did my purchased songs go???????? Can I transfer my purchased songs from the PC to my MAC or iPod Shuffle??????? PLEASE HELP!!!
-
Multiple Leopard Servers - DNS Setup
Hi guys, Just wandering what I need to do when setting up more than one server on the network with my DNS settings. I already have a leopard server box, running advanced with DNS setup and working correctly. How do I setup the second server? Do I cre