PS CS5.1 [was: 5.5] will not see my Canon 550d cr 2 files

I am running a mac on os x and Photoshop 5.1 . I just purchased a canon rebel 550d (T5i I think) It will not see any of the images. This must be an Adobe issue as the MAc finder and preview sees the images.
SO I have downloaded and tried to install various camera raw updates. 5.1 5.7 6.1 6.4 7.1 7,3 nothing seems to work indeed one of them failed to open. ver 6.1 will not open as an error code comes up. this error code relates to not being elligable for the version, yet it says cs 5. cs 5.5 and 6 are worthy.
CAn someone help please.
regards Paul
Message was edited by: Paul the Artist

Paul the Artist wrote:
I am running a mac on os x and Photoshop 5.5 .
Do you mean Photoshop 5.5 (shipped in 1999) or Photoshop CS5 (shipped in 2010)?
If 5.5 (1999), then it's unlikely to ever read Raw files.
If you mean CS5 then try Help > Updates to update your Camera Raw to version 6.7.
Direct link for Camera Raw 6.7 for Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5370
The 550D has been fully supported since Raw 6.1
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Similar Messages

  • Installed leopard 10.6.7 Photoshop CS3 will not see my canon scanner in the file/import

    I have been using CS3 for years, with my faithfull canon 5600F used the import twain feature worked great, installed leopard 10.6.7: now my twain plug in does not show in the import menu: I read through many forums & posts: can't find a solution.
    I do not have the "open rosetta" feature in the file info.
    so what can I do?
    am i the only one to experience it?

    Have you checked for updates to the drivers, etc? See
    http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_5600f#Dri versAndSoftware
    You need to select the OS to see what is available.

  • FCP 7 will not see my Canon XHA1S

    I have just bought a new *Canon XHA1S* HD Camcorder and made a few clips, all HD 1080i 50 (PAL). I have tried connect the camera via the 400 (6 pin) Firewire socket on the camera to the 800 on the MAC Pro. No matter what I try the MAC has no idea it exists. I have tried removing all other firewire devices .. making sure the camera is powered and on VCR with the FW cable in before starting FCP7 no joy. Also have tried iMovie 9 too, it also sees no camera. The cable and port on the MAC are fine to verify this I connected the same cable to a small external FW drive and it worked first time. I have adjusted various FCP settings and on the XHA1S too .. I now have very little hair left all pulled out .. all help is gratefully received !! HELP PLEASE !!

    Hi Jim.
    I just use the HDV 1080i50 Firewire Basic Easy Setup, which is preferable for Canon equipment. Everything works fine.
    With regard to camera settings, I just put the cam in VTR mode and make sure it's set up for HDV. Downconversion should of course be OFF if you want to capture HDV. (By the way I've found it's necessary to disconnect the firewire cable to enable/disable HD downconversion, not that that's relevant to your immediate problem.)
    The camera setting AV->DV should be OFF. (On is for when you're recording straight to the camera using the RCA analogue inputs.
    Sometimes the XHA1's VTR is a little finicky in and refuses to switch properly between HDV and DV. Make sure the correct format is showing in blue in the camera's mode selector dial (when you switch it to VTR mode).
    That's all I can think of - but of course the more unpalatable possibility is that the camera's firewire port is not working. They're pretty delicate; you have to be very careful inserting the cables, but I'm sure you've been careful with it.
    Do you know anyone else with a know working system (or a working XH-A1 that you could borrow?)
    If you're in Dublin anytime soon I'd be happy to let you try your camera on my own system. (My email is in my profile, though not in the usual place).
    Hope this helps.

  • Camera Raw will not open my Canon 7D MarkII raw files

    Hello! I recently got a Canon 7D Mark II for Christmas and took my first photo today. When I try to open my RAW file in photoshop it says it cannot open that file type, check to make sure  your updates are current. I did this and it says they are for both Bridge and Photoshop. I checked to make sure my camera is on the list for compatibility and it is. Do not know what else to do. I have a PC and Adobe Photoshop CS6. Any help would be greatly appreciated! Thanks!

    You need ACR 8.7.1 to support your 7D Mark II. Here is the link: https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html
    Benjamin

  • I have CS5 and LR5. they will not talk anymore. Everything was working 5 days ago. I can no longer access CS5 from LR5 edit, then drop it back into LR5. Need support

    I have CS5 and LR5. they will not talk anymore. Everything was working 5 days ago. I can no longer access CS5 from LR5 edit, then drop it back into LR5. Need support

    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop ("CS5" won't do for instance; we would need CS5 vers 12.0.2 or whatever) and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Macbook will not see wireless network

    My new Macbook will not see my wireless network. My Windows 2000 PC, my Ipod touch and my Macbook Pro (jaguar) all see it no problem and work well with it.
    I have tried entering the network name manually and it does not work. I have WEP password protection.
    The macbook sees and connects to all other wireless networks I've encountered (father-in-law's house, Airport departure lounges, hotspots etc.). The macbook also sees my neighbours networks no problem.
    I am confused, please help.

    I am having the same issue, a friend visited with his new Mac Mini, running Leopard, and it would not see the wireless network, that 3 other macs (PowerBook G4, iBooks G4 and G3) running Tiger (10.4.11) and Windows machines recognize without problem.
    I'm wondering if the issue is Leopard and 3rd party routers or MY router in particular, as I have a US Robotics 5461, and I remember when a previous roommate replaced her G4 iBook, running Tiger, with a MacBook Intel running Leopard, she also had issues connecting wirelessly.
    My friend's Mini had no problem recognizing all the neighbors networks (at least 4 or 5) and I'm pretty sure they are not Mac users with an Airport Base Station.
    I was hoping to upgrade my G4 PowerBook (once I get it repaired) to Leopard in the future, but I don't want to lose the ability to connect to my wireless network.
    Has anyone running Leopard run into this problem and found a solution?

  • G5 Dual 2.0 will not see sata dirve, but boots to ide on the cdrom cable

    I have a G5 dual 2.0 and it will not see the sata drive. I have a 320 wd and a 80 wd.
    At one point last night I was able to partition the hd using firewire and a mac mini. But no longer can see the drive.
    I pulled the drive from my g4 with panter and plugged it into the cdrom cable and it boots fine.
    How do I get the sata back working?
    In info, it show the ide and then says k2 sata root twice below that.
    I am running 512 pc3200 ram
    Any help appreciated

    Hi, This is a power mac mini 1.42 with tiger
    I tried with my macbook and it would not see it, and the macbook was asking to do some crazy thing to be able to use it as storage, just left macbook alone.
    When I formated I zero'd all data, then just used whatever was default.
    Messing around now, I can see the 80 gig. Panther just installed with much difficulty LOL, so my machine is fine, just need to figure out the drive now
    The 320, I will put in a HP machine and use gparted again. Should I leave it unformatted or try a different file system? I think when I wiped the windows from it I left it unformatted the first time.
    After I did partition, I made 3 partitions on the 320 and drug my os9 folder onto the second partition, Maybe that did it. This is the first I am really messing around with a g5, so much to learn.
    I think zapping pram frequently is what is working so far. Going after the 320 now

  • Time machine will not see USB attached drive

    I am having some difficulty getting Time Machine to see a USB attached Lacie drive. I can get it to mount through the finder, but Time Machine will not see it. It also works fine through a direct firewire connection. I have all of the current updates. Any help is appreciated.

    Well after much trial and error I figured it out. I had to enable file sharing with a disk password. Before I had it set up for accounts and it was not mounting properly.

  • If I disconnect and connect the session which was currently working will not be avialable but a new session starts.

    Hi
    RDP connection over server 2008 R2 standard, if I disconnect and connect the session, which was currently working  will not be avialable but  a new session starts.
    what features should I add and how to configure so that if connection is lost the user should see the same session when they connect back.
    kind Regards,
    Jayanth

    Hi,
    Please enable this policy and try again.
    Restrict Users to a Single Session
    http://technet.microsoft.com/en-us/library/cc754762.aspx
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • What do I do to view images on CS5-64 when it will not open them?

    The program will not open images, either directly or from Bridge.  Using Win 7 on a Dell PC.

    Strange, after rebooting, both Ph CS5 and Bridge are working again.  Thanks for getting with me.
    Date: Fri, 9 Aug 2013 23:30:38 -0700
    From: [email protected]
    To: [email protected]
    Subject: What do I do to view images on CS5-64 when it will not open them?
        Re: What do I do to view images on CS5-64 when it will not open them?
        created by Mylenium in Photoshop for Beginners - View the full discussion
    What exactly? What image files? Do you get any error messages/ warnings? Provide more info.
    Mylenium
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5582783#5582783
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5582783#5582783
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5582783#5582783. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop for Beginners by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Can i install windows 7 via bootcamp (MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air. In bootcamp i allocate the partition then i click install and bootcamp will not see the disk.

    Can i install windows 7 via bootcamp (on my MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air via remote disk. In bootcamp (on my air) i allocate the partition, then i click install, and bootcamp will not see the disk from my macbook pro's drive. How do i get the bootcamp assistant running on my MB air to automatically find the disk in my macbook pro with the ISO image of windows 7? The remote disk on my air can find the cd but bootcamp will not begin installing it. Anyway to do this without buying the damned usb drive?

    I don't know first hand if you can use the Remote Disk option with Windows but as of 10.7.2 you can now use BCAssistant to make a bootable USB (thumb drive or external disk) W7 installer with the Boot Camp drivers installed also. Have you tried that yet?

  • I have a Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it.  The card is recognized but will not see the in-house network.  This is a pre-intel computer.  Do I need an antennae?

    I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it.  The card is recognized but will not see the in-house network.  This is a pre-intel computer.  Do I need an additional antennae?   If so, which one because my research is confusing me about what is supposed to work with this computer.

    Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.

  • Adobe Bridge CS5 is frozen and will not open files?

    Adobe Bridge CS5 is frozen and will not open files?

    Platform and OS?
    In any event the Bridge forum is here:
    http://forums.adobe.com/community/bridge?view=discussions

  • I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed

    I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed them in the past.  How can I get it to display these photos in Bridge and open them in RAW?

    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
    Benjamin

  • Ive recently updated my mac to OS X 10.10 and now my CS5 illustrator and photoshop will not open...  I uploaded the most recent Java and they still won't open.  Please help

    Ive recently updated my mac to OS X 10.10 and now my CS5 illustrator and photoshop will not open...  I uploaded the most recent Java and they still won't open.  Please help

    Mac,
    Nothing shows up here?
    https://www.adobe.com/account/my-products-services.html#
    With CS5 you must have registered, hopefully under your present Adobe ID.
    I am afraid the chat and phone support are off until the beginning of January.
    Serial number and activation support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
    http://helpx.adobe.com/x-productkb/global/service1.html
    Adobe ID and registration support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
    http://helpx.adobe.com/x-productkb/global/service-c1.html
    http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

Maybe you are looking for

  • My iphone screen locked i forget my password how to open my iphone 4s

    my iphone screen is locked i am forgot password how to open my phone please help me

  • I'm trying to intergrate one directory path

    I'm trying to intergrate one directory path into the player, so the program will run all media in that directory without filechooser option. I've got this piece of code in another program of mine, which reads the directory the program runs in. Can th

  • Manipulati​ng 2D arrays

    I'm fairly new to labview and working on a VI that I am taking over. The VI has channels 0-31 (channels 0-3 are being used for a photo sensing diode).  In a while loop I am oversampling data at 1000 points/sec and the plan is to average 1000 pts and

  • Need help creating "rubber stamp" logo

    I would like to create what should look like a rubber stamp, to place inside an Indesign document. Something like this (drawn very roughly in Photoshop): However, although I have Illustrator CS4 (Macintosh version) I've never used it and could need s

  • Nokia n73 network disappears after sending a few c...

    i am suffering from a unique problem on mine nokia n73 me when ever i send continuous messages through the phone the network disappears and i have to restart my handset it only happens when sending continuous messages it allows me to send a few messa