PS CS5 and PSD and TIFF files

I.m working on a project and noticed when I went to save a file as a tiff it asked if for pc or mac. If I save as a pc will that tiff be able to be opened on a mac?
After seeing the options on saving the tiff came up with another question - the psd files when saved can they be read on either the pc or mac?
TIA
John

You might want to read the dialog, and the manual.
That's only asking for the byte order -- and it really doesn't matter unless you're sending the TIFF to a buggy program that ignores the byte order in the file.
PSD files work just fine on any platform.

Similar Messages

Tga and tiff files

Hi Can IMOVIE HD load TGA and Tiff files *** theres some cool effects animations u can get http://cgi.ebay.co.uk/SPECIAL-EFFECTS-DVD-VOL-12-Movie-making-Video-editing_W0QQ itemZ220018246079QQihZ012QQcategoryZ51344QQrdZ1QQcmdZViewItem
Just wanted to know if they would work.

as said: iM does NOT allow out-of-the-box two layers simultanously/alpha-chanel/keying...
you can teach iM new tricks with plug-ins, have a look here, "Matte-tastic", part of Geethree Slick 4 package:
http://www.geethree.com/slick/galleries/d_v4.html :
Use the Configure button to select a file. The graphic file can be PICT, JPEG, GIF, animated GIF and Photoshop image. . Video formats supported are QuickTime video files. Transparent alpha channels are supported
because, these files are stored as tga/tff, you need probably additionally QTpro, to make from many stills, a socalled image sequence, a QT.mov you can use in iM...
and as said, with QTpro allone you can add as many layers as you want....
honorable forum member wrote a book about the many features of QTpro, have a look here http://homepage.mac.com/kkirkster/book
to give you a clue, visit the pre-alpha website of my SWFan project... click here ... I add some explosions (using Final Cut Expresss...),, you get for free here Detonation Films (slow)... a very short sequence is seen in Teaser II... (project still in progres...)

Why won't Final Cut Pro import layers in PSD or TIFF files?

I'm trying to import layers that were created as EPS files. I converted them into PSD and TIFF files in Photoshop CS6. FCP is rejecting the PSD files and flattening the the TIFFs. Help!

Perfect. I changed the mode to RGB and it worked. I had already confirmed the layers were all rasterized. Thank you for your help.

Rendering PSD and Tiff files in Shaked

Bonjour. All of my psd and tiff renders in Shake are creating invalid files, i.e. that can't be opened in Shake itself of Photoshop etc.
Anyone have a line on this? Open exr and jpeg files render fine.

I'm sorry if this is the wrong forum to post this request, but I figured that this was the best place to ask.
These feature requests better be placed in the correct location:
http://feedback.photoshop.com/photoshop_family
You also might get a better answer but I'm not sure what way you need to leave comments and notes. You already have the option to label and rate the files and of course you have the IPTC Metadata to leave comments in (e.g. IPTC status / instructions).
As for the request to view layers, that would be nice but certainly not easy to realize. But it might be useful to extend this request in more detail, about how would you see them. Currently the preview window has a max of 9 files to view in one panel, would you see them scrollable or together in one window? Some layers have only masks or brush corrections in masks, would you see them in the same way as in PS using alt click on a mask?
The more detailed you make your feature request the better chance in getting more votes and better replies in possibility etc.

Email keeps flattening the layers on my psd and tiff files

Hi,
My friend and I both have macs that run Leopard 10.5.6, and we both have Photoshop CS3. When she sends me a psd file through email, I can open it in photoshop, and see all the layers. When I create a psd file with multiple layers, I double check that it's saved properly by reopening it, and still see the layers. When I send it to her through email, she gets a flattened image with just the background layer. Same thing happens with tiff files. I don't think the problem is with the photoshop because the layers are all there and fine until I send it through email. Does anyone have any ideas on this one?
Soma104

Ah yes, I think the option changed from "Create Archive" in Tiger to "Compress" in Leopard.
I'm not sure why the original problem only manifested one-way for you. It may not even be your computer - there could be a process in your outgoing mail server, or your colleague's incoming server, which affects the attachment. I've seen corruption with binary files before when sent through email, and converting them into ZIP files did the trick.
Also, if you're regularly transferring large files, you might want to look into an alternative to email, such as a shared file server (eg an iDisk, or a third-party hosting site, using FTP) or a professional file transfer service such as YouSendIt, or even sending through IM.
Matt

EPS and Tiff Files are not open...

Dear All,
If we open the EPS or Tiff file in Illustrator CS3, we got the error message as in the screenshot which named as “Illustrator screenshot.jpg”.
If we open the EPS or Tiff file in Photoshop CS3, we got the error message as in the screenshot which named as “Photoshop screenshot.jpg”.
We unable to open the file both in Illustrator and Photoshop. Is there any other option to open the file? Please advice.
I’ve attached the images and screenshots for your better reference.
Thanks in advance.
Kumaran. P

These files are completely corrupt. I got the same error messages you did in Illustrator and Photoshop.
The EPS files look quite hopeless. (They do not remotely resemble EPS files when viewed in a text editor.) The TIFF file opened in IrfanView. I've resaved it as a JPEG and attached it here. You can see that it's truncated.
You didn't mention how you obtained the files.

How can I change RAW and Tiff files to jpeg in Aperture 3

How can I change RAW & Tiff to jpeg in Aperture3

The purpose of Aperture is storing and managing image files including RAW and TIFF, generally users don't change the image format once it is in the library, there is no need.
If you want a jpeg version of an image for use elsewhere, you simply export it from Aperture, there are numerous ways of getting images out of APerture depending on what you plan to do with them, e.g. File>Export>Version gives you a lot of choices as to the format and quality of your exported file.

How does ACR save edited JPEG and TIFF files?

When a JPEG or TIFF file is edited in ACR, are the edits destructive when you click the "Done" button, permanently changing the file? Or is the edit info saved in sidecar files like with edited RAW files, not affecting the original file?
If I reopen a previously edited JPEG file in ACR, will the adjustment settings be the same as where I left off, allowing me to change those edits, like a crop or HSL adjustment? Thanks.

First: There is a Camera RAW Forum.
http://forums.adobe.com/community/cameraraw
Second: It should be fairly simple to test your hypotheses.
And on my station at least it appears the data is stored in the file and not as a sidecar-file.

Exif tool and Export Jpeg and Tiff files

I run Lightroom 4.4 under Apple OS X10.4.4
When I export files Exif Tool (in Graphic Converter) under ICC header shows for Jpeg "Primary Platform = Microsoft and for = Tiff Apple; and under ICC Profile Color profile for Jpeg = HP but Adobe 1998 for Tiff. I can see that there is a difference between the profile for Jpeg and Tiff (eg sRgb and Adobe1998) but don't follow why the Primary platform differs and shows Microsoft for Jpeg and that the jpeg profile is HP. Can anyone explain, please, and dose it matter anyway? Thanks Clive

A overview of ICC profile tags is here: http://www.sno.phy.queensu.ca/~phil/exiftool/TagNames/ICC_Profile.html
Why the difference in the PrimaryPlatform tag, I don't know, it does not matter.
The ProfileCopyright tag is HP for sRGB, Kodak for ProPhotoRGB and Adobe for AbobeRGB (1998) of course.

Quicktime and tiff files

I use a windows 7 laptop. In the course of my week I view many tiff files. I have the default program for tiff set as windows photo viewer. Nonetheless, Quicktime always comes up. I wouldn't mind, but I cannot view all pages, and sometimes nothing shows. So each week I have to remove Quicktime in order to view my tiff files in Windows Photo Viewer. Very, very, frustrating. Any thoughts?

Excellent news, Bulent!
I hope Quicktime does not, later, try to take over again.
Good point ... next time you do a QuickTime update directly from the Website:
http://www.apple.com/quicktime/download/
... very near the end of the install, there should be a screen with a "Configure File/MIME types" button. Click the button, go to the MIME types, and make sure that that TIFF image entry is unchecked. That should avoid the problem in future.

Compatibility between LR 1.3, ACR 4.3, PScs3, & Bridge CS3 to read metadata in psd or tiff files

I would like Bridge, ACR, and PS to be able to read the metadata of pds/tiff files that are "developed" in LR when the metadata has been saved to the file inside of LR. Currently BridgeCS3, ACR 4.3, and PS CS3 don't see these changes.
The only way around this that I have found is to export or edit in PS option - both of which give you a new file. I don't want a new file - I want the original file (psd tiff) that was imported into LR to have the ability to be updated with the changes made in LR.
I have found that when you export the psd from LR it essentially flatens the image so you will no longer have access to any layers done in PS. Depending on how many edits you perform, whether they are done LR or PS, and the order in which you do them in directly impacts the amount of edit files you will end up with for the same photo. Your edit information then becomes scattered amongst all the different files instead of having one central file as a repository for the edits so you can backtrack if you need to (like through layers in PS and the history panel in LR).
I really like the LR interface and being able to drag with the different tools directly on the photo to edit. I just would like those changes to be reflected (once metadata is saved) amongst the other programs as well.

I have tried saving XML files with Tiffs and the only way I have been able to get Bridge to see the metadata changes from LR's develop module is to export the file to PS or Bridge. On export the file becomes flattened so you do not have the access to any previous layers made in PS. Also once exported from LR, you are unable to see the files history log (LR) as to the changes made in LR that had been previously written to the metadata. And of course the flattened PS element so you have no way to back track in edits if you chose to do so.

Cannot open PSD or TIFF files in Camera Raw

I made a picture in HRD Pro, and i want to work on it. I saved it as a .psd and also as a .tif, but I cannot open nor the .psd, nor the .tif in Camera Raw? If I save it as a .Jpg I already lose quality..?
Message title was edited by: Brett N

PSD files in Camera Raw:
1.— Stay the heck away from Bridge!
2.— Instead of right-clicking on anything, go to Photoshop's File menu and Select the Open menu item.
In the dialog box that opens, find your PSD file, select it, then go down to the bottom of the box and select Camera Raw in the dropdown menu next to Format:
TIFF files in Camera Raw:
Just make sure to enable TIFF support in Camera Raw Preferences, then open it like you open any JPEG or raw file:
Message was edited by: station_two

Bridge Plugin: Make comments and see layers in PSD and TIFF files

I've been searching the interweb thin for Bridge plug-ins without luck.
I work in a production company and we have a quite intense QA process meaning that we compare images against each other and return feedback to editors.
So instead of cycling through applications it would make our life so much easier to just stay inside adobe bridge.
What I'm looking for is a plugin for Adobe Bridge with following attributes:
1. leave comments and notes on images
2. See layers in tiff and PSD files
I'm sorry if this is the wrong forum to post this request, but I figured that this was the best place to ask.
Ps. it is not important what version of Bridge it will be compatible with (but preferable cs6)
Best regards
Mick

I'm sorry if this is the wrong forum to post this request, but I figured that this was the best place to ask.
These feature requests better be placed in the correct location:
http://feedback.photoshop.com/photoshop_family
You also might get a better answer but I'm not sure what way you need to leave comments and notes. You already have the option to label and rate the files and of course you have the IPTC Metadata to leave comments in (e.g. IPTC status / instructions).
As for the request to view layers, that would be nice but certainly not easy to realize. But it might be useful to extend this request in more detail, about how would you see them. Currently the preview window has a max of 9 files to view in one panel, would you see them scrollable or together in one window? Some layers have only masks or brush corrections in masks, would you see them in the same way as in PS using alt click on a mask?
The more detailed you make your feature request the better chance in getting more votes and better replies in possibility etc.

Can I automate the writing of XMP metadata into JPEG and TIFF files?

I have written an ASP.NET 3.5 website application on behalf of an annual international photographic competition. Entrants will be uploading digital photos in either JPEG or TIFF format. Ideally, I would write entrant identity and image title information into the XMP metadata for each image immediately after upload - but so far, I have failed to find any way to do this in ASP.NET.
Thousands of images are involved, so I need to find a way to automate the metadata insertion, perhaps with some sort of script that uses a text file (extracted from the SQL Server database on my website) as the source of the metadata for a batch of images. Is this the sort of task that can be done by writing a script for Bridge CS3? Are there any scripts already in existence that I could use? I am a total beginner in this area.
I use a Win XP PC, though I have a colleague who, I think, has CS3 on his Mac (running under the Leopard OS), so scripts for either platform might be usable.
David

You are the man X!
Ok here is another version with a check for the dll.
#target bridge
   if( BridgeTalk.appName == "bridge" ) {
addInfo = new MenuElement("command", "Update Entry Details", "at the end of Thumbnail");
addInfo .onSelect = function () {
     main();
function main(){
var csv = File.openDialog("Please select CSV file.","CSV File:*.csv");
if(csv != null){
loadXMPScript();
csv.open("r");
while(!csv.eof){
   strInputLine = csv.readln();
   if (strInputLine.length > 3) {
      strInputLine = strInputLine.replace(/\\/g,'/');
   inputArray = strInputLine.split(",");
   var csvFile = new File(inputArray[0]);
   var title = inputArray[1];
   var author = inputArray[2];
if(!csvFile.exists) {
alert(csvFile + " Does not exist"); //////////Check if file exists
return;
if(csvFile.exists){
var file = new Thumbnail(csvFile);
try{
var xmpFile = new XMPFile(file.path, XMPConst.UNKNOWN,XMPConst.OPEN_FOR_UPDATE);
}catch(e){
      alert("Problem opening xmp for update:-\r" + file.path +"\r" +e.message);
      return;
try{
var xmp = xmpFile.getXMP();
}catch(e){
      alert("Problem opening xmp data:-\r" + e.message);
      return;
xmp.deleteProperty(XMPConst.NS_DC, "creator");
xmp.deleteProperty(XMPConst.NS_DC, "title");
try{
xmp.appendArrayItem(XMPConst.NS_DC, "creator", author, 0,XMPConst.ARRAY_IS_ORDERED);
xmp.appendArrayItem(XMPConst.NS_DC, "title", title, 0,XMPConst.ARRAY_IS_ORDERED);
}catch(e){
      alert("Problem writing xmp data:-\r" + e.message);
      return;
if (xmpFile.canPutXMP(xmp)) {
xmpFile.putXMP(xmp);
}else{
alert("Can not write new metadata to " + csvFile.spec);
xmpFile.closeFile(XMPConst.CLOSE_UPDATE_SAFELY);
unloadXMPScript();
function loadXMPScript()
   var results = new XMPLibMsg("XMPScript Library already loaded", 0, false);
   if (!ExternalObject.AdobeXMPScript)
      try
         ExternalObject.AdobeXMPScript = new ExternalObject('lib:AdobeXMPScript');
         results.message = "XMPScript Library loaded";
      catch (e)
         alert("Could not load AdobeXMPScript \r" + e.message);
         results.message = "ERROR Loading AdobeXMPScript: " + e;
         results.line = e.line;
         results.error = true;
   return results;
function unloadXMPScript()
   var results = new XMPLibMsg("XMPScript Library not loaded", 0, false);
   if( ExternalObject.AdobeXMPScript )
      try
         ExternalObject.AdobeXMPScript.unload();
         ExternalObject.AdobeXMPScript = undefined;
         results.message = "XMPScript Library successfully unloaded";
      catch (e)
         results.message = "ERROR unloading AdobeXMPScript: " + e;
         results.line = e.line;
         results.error = true;
   return results;
function XMPLibMsg (inMessage, inLine, inError)
   this.message = inMessage;
   this.line = inLine;
   this.error = inError;

Issue with InDesign cs5 and network files.

On Mavericks having issues with InDesign CS5. When trying to open a file from an smb netwrok drive it goes into Not responding.
have tested InDesign working correctly with local files.
have tried removing, SING folder. tried reinstalling.
all updates on OS and adobe InDesign have been installed.
any suggestions would be appreciated.

CS5 is unsupported under Mavericks.
Unfortunately, you’re pretty much on your own here.

PS CS5 and PSD and TIFF files

Similar Messages

Maybe you are looking for