PS CS5 error message, "The requested operation cannot be performed..."

When trying to save an image under the "save for web & devices" I get this error message, "The requested operation cannot be performed on a file with a user-mapped section open." I have the latest driver on my computer. For a while I would get this message now and then, now it is all the time.

I have this problem too. It only affects Photoshop. It doesn't happen every time I try to save for web, but it happens on all kinds of files, even new files that I have created from scratch in Photoshop. Sometimes, all I have to do is create a new file and click save for web, and I get the error.
It doesn't happen if I turn off my Antivirus program - Trend Micro Titanium Maximum Security.
So I would think it was a problem with Trend Micro, but it doesn't occur with any other program and I can save files with Photoshop, unless I use the Save For Web option.

Similar Messages

Error processing cube - requested operation cannot be performed on a file with a user-mapped section open

Hi,
We have recently moved our production servers and since the move have been experiencing an intermittent (but frequent) error when processing our OLAP cube.
The error messages presented are:
"Error: The following error occurred during a file operation: The requested operation cannot be performed on a file with a user-mapped section open"
"Error: Errors in the OLAP storage engine: An error occurred while processing index for the <Partition Name> partition of the <Measure Group Name> measure group of the <Cube Name> cube from the <Database Name> database"
I assume the second message is a consequence of the first error. The partitions and measure groups seem to vary each time the process is run.
It appears from similar threads that this is usually caused by backups or anti-virus applications locking the files that Analysis Services is using the process the cube. I have ensured that there are no backups running at the time of processing and
I have disabled anti-virus programs without success.
I have also created a new version of the cube (using the deployment wizard) which deployed without error but then encountered the same error when processing for a second time. There was nothing (client application wise) using this cube when it failed
to process.
As I mentioned earlier, this problem is intermittent. Sometimes the cube will successfully process but usually it fails to process.
We have not encountered this error in our previous production environment or in any of our development environments.
Has anyone encountered this problem before? Any suggestions on possible solutions?
Thanks
Rich

Hi jonesri,
I think you can try to use SSAS Dynamic Management View to monitor SSAS instance, such as existing connections and sessions. For example, please run the following MDX query:
SELECT[SESSION_COMMAND_COUNT],
[SESSION_CONNECTION_ID],
[SESSION_CPU_TIME_MS],
[SESSION_CURRENT_DATABASE],
[SESSION_ELAPSED_TIME_MS],
[SESSION_ID],
[SESSION_IDLE_TIME_MS],
[SESSION_LAST_COMMAND],
[SESSION_LAST_COMMAND_CPU_TIME_MS],
[SESSION_LAST_COMMAND_ELAPSED_TIME_MS],
[SESSION_LAST_COMMAND_END_TIME],
[SESSION_LAST_COMMAND_START_TIME],
[SESSION_PROPERTIES],[SESSION_READ_KB],
[SESSION_READS],[SESSION_SPID],
[SESSION_START_TIME],[SESSION_STATUS],
[SESSION_USED_MEMORY],
[SESSION_USER_NAME],
[SESSION_WRITE_KB],
[SESSION_WRITES]
FROM $SYSTEM.DISCOVER_SESSIONS
Use Dynamic Management Views (DMVs) to Monitor Analysis Services:
http://msdn.microsoft.com/en-us/library/hh230820.aspx
In addition, you can aslo use SQL Profiler to capture some events for further investigation.
Use SQL Server Profiler to Monitor Analysis Services:
http://technet.microsoft.com/en-us/library/ms174946.aspx
If you have any feedback on our support, please click
here.
Regards,
Regards,
Elvis Long
TechNet Community Support

Beasrv.exe The requested operation cannot be performed on a file with a use

Hi guys,
I am trying to upgrade WLS from 10.3.3 to 10.3.5
But I got the following:
Fatal error occurring during the installation. beasrv.exe(The requested operation cannot be performed on a file with a user-mapped section open).
I search in taskmgr this proccess but it does not here.
Also restart the server and nothing. And also unzip again the patch to another folder and it does not work.
Any help guys?
Thanks in advance

Do you have a node manager (or WebLogic server) installed as a service?
These should be visible in the task manager as beasvc.exe.
To check if there are services installed, open your service environment and look for the entries
such as: Oracle WebLogic NodeManager or beasvc domain_name.

Ui5 - eclipse "the requested operation cannot be performed "

Hey all, I have get the "the requested operation cannot be performed on a file with a user-mapped section open" when i tried to save the my ui5 works on eclipse after i close all sessions about the related sources. After app. 5 min later, it fixed.

it seems that there is no exact solution about the issue, i thought that this is about the apache session of the related application, apache thought that the session still on going although i ended it. it is a generic problem as i thought when i google it. hope that i can find an exact solution. Thanks mike.

When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be perfomed on a file with a user-mapped selection open'.

When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be performed on a file with a user-mapped selection open'. This happens with any of my files not just one in particular...
Can anyone help solve this please?

ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what.

Error message: The request for account "iCloud" failed. The server responded with "400" to operation CalDAVUpdateShareesQueuableOperation.

I created a new public iCAL. Trying to send invitations to join and am receiving this error message:
The request for account “iCloud” failed.
The server responded with
“400”
to operation CalDAVUpdateShareesQueuableOperation.
Tried copying the URL link provided for the Calendar into a MailChimp announcement. Not working.
I've tried the uncheck calendar method on iCLOUD and re-checking to stop the pop-up message.
Is this perhaps because they don't have an iCLOUD account? If they have iTUNES, shouldn't it work?
Appreciate any help.

Try this first:
In iCal Preferences…, choose Accounts, then select the account that is giving you trouble. Uncheck the box labeled Enable this account. Wait a few seconds, then re-check the box. This should solve the problem.

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded"

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded". Any advice on what I can do in order to watch this movie that I rented a couple of weeks ago?

Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

Can't install itunes - error message "the folder "itunes" cannot be found

Help. I just bought a new Iphone and can't get itunes to load. I had itunes on my computer for several years for my nano - haven't synced up in about a year. Went to open it and got the following error message
The folder "itunes" cannot be found or created and is required. The default location for this folder is inside Mu Music folder"
I have uninstalled everything - quicktime, apple mobile, every single file. I have rebooted, run searches to make sure there were no files at all left - did it through control panel, search etc., rebooted and downloaded it again (this make about 5 times now) and still get that same message that the folder cannot be found. Help! I just blew about $400 in the Apple store!
Can anyone help me?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I just installed ITunes 11.0.4. I get the error message: "The Itunes Library cannot be saved. A folder was specified instead of a file." When I sign on next, it says the library can't be found. Running Windows Vista with Mcafe protection

I just installed ITunes 11.0.4. I get the error message: "The Itunes Library cannot be saved. A folder was specified instead of a file." When I sign on next, it says the library can't be found, and Itunes wont open. I'm running Windows Vista with Mcafe protection

Hi there Br0x,
You may want to try rebuilding the iTunes library as an initial troubleshooting step. Take a look at the article below for more information.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
-Griff W.

Create process error 740 the requested operation requires elevation

Hi Friends,
I'm trying to launch Virtual KeyBoard from my application. I'm using jdk1.6.0_02. (I also tried on jdk1.3 , which throws same exception as of jdk1.6.0_02)
try{
            Runtime.getRuntime().exec("C:\\Windows\\system32\\osk.exe");
        catch(IOException ex){
            System.out.println(ex.getMessage());This works fine on Windows XP , but on Windows Vista it throws exception :
Can not run Program "C:\Windows\System32\osk.exe" :create process error 740 the requested operation requires elevation
It works on Vista if I turn off user Account control from User Account in ControlPanel.
While If I try to launch (Calculator)Calc.exe instead of (Virtual KeyBoard)osk.exe then it launch successfully without turning off User Account Control.
Does any one has an idea how can I launch Virtual Keyboard ("osk.exe") without turning off user Account Control on Windows Vista.
I'll appreciate any help regarding this topic.
Thanks.

Thanks for your promt reply.
The llink you write is not launching the page.
My question is why it launching Calculator without any privillage, while it has problem in launching Visual KeyBoard.
Thanks

HT4097 Help! Everytime I try to update my iPad 2 on 4.3.3 it get is error message "The iPad "iPad" cannot be restored at this time because the iPad software update server could not be contacted or is temporarily unavailable." I dont know why please help

Help! Everytime I try to update my iPad 2 on 4.3.3 it get is error message "The iPad "iPad" cannot be restored at this time because the iPad software update server could not be contacted or is temporarily unavailable." I dont know why please help.
I'm running 4.3.3 on a ipad 2 im computer is connected via wire to internet

See
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was

I recently purchased/upgraded from Premiere Elements 5 to Premiere Elements 9 and I cannot open the projects in version 9 that were created with version 5. It shows it as offline. I get a message to open up a file and when I do i receive the error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was created with 2 audio channels. Can someone help me or tell what I am doing wrong? All of my projects that were completed in version 5 cannot be opened up in version 9.
Thank you.

Bill,
I ran G-Spot on one of the files and here it what I have:
DVD "VOB" format
MPEG-2 Program Stream << { 1 vid, 1 aud }
Sys Bitrate: 10080 kb/s VBR
I guess I am really confused. The project that I am trying to open PrE 9 was completed in PrE 3 w/templates , scenes, etc. The movie was burned to a DVD. I cannot understand why I cannot open it with a newer version of PrE. According to G-Spot (I am assuming this is what you mean above), it is already in 2 channels. To me this should be ok. I put many, many hours into these videos and now it seems all for not.
Here is what I did so far:
I uploaded the required media files to a new project in PrE9 and let them index and conform. I saved the project with the same name in a different location. Do I have to do this to the project files and/or the original media files? Confusion starts here.
The next step is where I am confused. I do not know if I am proceeding in the right direction from here. There is the share tab in the upper right hand corner. Is this what you are talking about? I am truly lost from here.
Thanks.

Error message The folder Itunes cannot be found or created and is required"

Help please. I get the message "The folder Itunes cannot be found or created and is required. The default location for this folder is inside the My Music folder". As a result, I cannot get Itunes to load. Have uninstalled and reloaded, repaired etc, all not working as still end up getting same message. Have also made an ITunes folder in My music, all to no avail. No viruses and virus library totally up to date. Getting to stage where I want to throw Ipod in bin and get an Iriver as its driving me insane!!

Here is a copy of the ilounge entries. I got one of my more IT literate guys to do this - but it looked easy when he did it!! important thing is it all came back - was a problem as I had moved an external hard drive so one of the locations detailed below showed the old address.
Good luck!!
Click on Start
Clin on Run
Type in "regedit" Enter
Do this step twice as there are two locations.
CTRL F
Type in "My Music"
Double Click and enter the path for where the folder is located.
The exact locations of the 2 entries that I changed are
hkeycurrentuser - software - microsoft - windows - current version - explorer - shell folders
and
as above - windows - current version - explorer - USER shell folders
Try changing the two items from there - if these have already been changed then I'm not sure what to suggest.

My laptop had to be reimaged and all software and programs were taken off. I installed itunes again but can't access my library. I get an error message "the folder itunes cannot be found or created and is required. The default location for this folder

I can't access my itunes music on my laptop after having it re-imaged. I installed itunes again but can't access the music folder. I get the following message when I click to open itunes: "The folder itunes cannot be found or created, and is required. The default location for this folder is the Music folder.
I have an iPad2, and iPad mini, and an iPhone5 with a different number of songs on each. I want to sync everything -- should have close to 800 songs. Tried to get support from Apple but would be charged for help.

I have a Windows 7 operating system my computer runs from.

Error message: "The share operation Apple Devices 1080p has failed"

Hey,
I have a MacBook Air, OS X version 10.9.3, running Mavericks, with 1.7 GHz and 8 GB memory. I'm running FCPX 10.0.8.
I've had no problems rendering and exporting all sorts of movies and short clips over the last few months, however every time I try to export my last clip, this message shows up after the clip is 10% done exporting: "The share operation Apple Devices 1080p has failed QuickTime Error: - 50"
I've already clicked on "prevent app nap" under Get Info for FCPX.
Does anyone have any idea what's going on, or can offer a solution to this?
Thanks so much!
Terra

Since you have already checked the Prevent App Nap box I assume you have seen this thread: https://discussions.apple.com/message/21920134#21920134
Seems likely to me that either one of the files in your timeline is giving you trouble or a render in your timeline is giving you trouble. I sometimes randomly run in to export errors with transitions or titles. Sometimes removing the effect/title from the timeline, deleting the render files or copying and pasting the timeline in to a new project can fix it.

PS CS5 error message, "The requested operation cannot be performed..."

Similar Messages

Maybe you are looking for