PS CS5 not seeing scanner in File Import

I've upgraded from CS3 to CS5 and PS doesn't see my scanner in File > Import.
I looked in the CS3 PS Import/Export folder and see a TWAIN.plugin, but don't see one in the CS5 PS Import-Export folder.
Should I copy the TWAIN.plugin into the CS5 folder? Or is interacting with scanners handled differently in CS5 vs CS3?
The scanner is a Canon LIDE 600F, and if I launch CS3 I can scan no problem.
Thx,
Steven

You'll need the TWAIN plug-in for CS5 (moving the old one from CS3 or CS4 is NOT a good idea)
http://kb2.adobe.com/cps/828/cpsid_82824.html
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4687
After you install the TWAIN Plug-in, you will likely need to run Photoshop in 32bit mode because most scanners have 32bit TWAIN drivers.

Similar Messages

Since upgrading to windows 8.1 I can not see any local files in the files window.

I have recently upgraded to windows 8.1 and can no longer see my local files in the files window. All remote files for all remote sites are visable.
If I change sites under local view get error thet dreamweaver can not update cache

Thanks Nancy
It certainly worked in windows 8.
I have deactivated and am trying to reload software inside of windows 8.1.
Will let you know.
Thanks again
Terry
Date: Fri, 1 Nov 2013 12:13:57 -0700
From: [email protected]
To: [email protected]
Subject: Since upgrading to windows 8.1 I can not see any local files in the files window.
    Re: Since upgrading to windows 8.1 I can not see any local files in the files window.
    created by Nancy O. in Dreamweaver support forum - View the full discussion
I honestly don't know if DW CS5 is compatible with Win 8.1. The OS compatibility FAQ only mentions DW CS6 & CC.
http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.ht ml
Maybe someone else can shed more light on this.
Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5807551#5807551
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5807551#5807551
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5807551#5807551. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

DW 4 not seeing GoLive .site file!

I have several sites created in GoLive 7. I downloaded the GoLive 9 free trial, brought them over into GL9. Then I did the "Convert Site to New Structure" command as I have seen suggested. Downloaded the GoLive to DW migration extension and installed it. So far so good.
But when I go to Import GoLive Site, and navigate to the folder where the site file is (there are actually several, only one is the current one), Dreamweaver does not "see" the .site files, even though when I look in the window in explorer, they are there. All I see are the web-content, web-data, and web-settings folders, but no .site files at all.

rich.leach wrote:
> no, the file was not open, and I tried all of the
various search options
> available in the DW Find feature, especially after this
issue was discovered.
> And if DW customers are required to register particular
file types with DW in
> order to have the application successfully search those
files, that would
> warrant a special instruction set or at least a dialog
box somewhere in DW,
> wouldn't you agree???
This is an issue that I have never come across before. You're
using a
non-standard filename extension, so it doesn't particularly
surprise me
that Dreamweaver ignored it. Have you tried entering
.properties in the
list of filename extensions, as I suggested? If that works,
your problem
is solved. All that's needed is for the documentation to be
made more
explicit.
On the other hand, if your filename extension is likely to be
in
widespread use, perhaps it's something that should be added
to the
standard list of files that Dreamweaver handles. Submit a
feature
request to the Dreamweaver team.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Purpose: to create photo galleries to insert or not items: 1) with phocagalery, it works 2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see noth

purpose: to create photo galleries to insert or not items:
1) with phocagalery, it works
2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see nothing in the media in content management
Can you help me

Mahsa21,
We are glad that we were able to resolve the international calling plan issue for you. If you need assistance,please reach out to us.
thanks,
Tonya D.

Elements 11 not seeing/downloading RAW files. HELP!!!

Hello,
Just got Elements 11 and when I put the card into my pc the download box pops up and it reads the card, but it does not see the raw files, only the jpg files. If I use windows explorer to view the card it sees the raw files fine. I can open raw files from the card into elements 11 editor fine. It just will not see the raw file in the downloader box. I had Elements 7 before 11 and it worked fine.
I have windows 7 and Elements 11 is updated to the latest version.
Any help would be great.
Thanks,
David

Thanks for the reply.
Thats right, not seeing any raw thumbnails. If I just have raw files on the card and put it into the PC's card reader or a USB exturnal card reader all it says is"This divice does not have any supported media". It will show the jpg and tif files. It's a really weird problem. Elements 7 worked fine. All my cameras are old, D700, D3, D300s, D1x so it's not a problem being a new camera thats not supported yet.
I'll try the organizer way and see if it works or I may just use the Nikon transfer software.

HP DJ4645 scanner does not see Mac OS 10 Maverick and computer does not see scanner

HP DJ4645 scanner does not see Mac OS 10 Maverick and computer does not see scanner.
I installed drivers and software from the HP website. Printer works fine but scaner does not work over WiFi. I did not try over USB because printer and computer are not in same room.

Hi @mamedina ,
I see that you are not able to scan over the wireless network. I would like to help you resolve this issue.
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Deskjet 4645)
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
I have provided a document to make sure the Scan to Computer is enabled. You will have to select 10.8, then Network Connection. A 'No Computer Detected' or 'Connection Error' Message Displays When Scanning for HP Officejet 4610 ...
If you are still not able to scan, then I would connect the printer to the computer by a USB cable to see if it is a network issue or the scan port might be blocked on the router. Unfortunately the printer isn't accessible in the same room, but this will rule out a software issue or a network issue. You can contact the router company to check and open these ports 9220/9500/427 on the router for scanning.
Please let me know the outcome.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Photoshop does not see scanner...can't import scanned images

I recently migrated from Windowx XP (32 bit) to Windows 7 (64bit). On the xp computer, I installed the driver for my epson V500 photo scanner, and when go to File--> Import, there is an option to import via espon scanner. However, in Window 7, with Photoshop CS4 64 bit installed, the installed scanner does not show up on the import menu. I don't know how to get it to see the scanner as it does on my XP machine. I tried copying the photoshop plugins/import-export folder from the xp machine to photoshop (64)/plugind/import-export folder, but that didn't make a difference.
I really need the scanner to be visible inside photoshop. Any help would be greatly appreciated.
Thanks.

If you are talking about 64 bit TWAIN there is none, and probalby will never be one. Too many techincal problems.
Most advise you scan with the scanner software and save to a location. Many like this better as it does not tie up PS when scanning.

Photoshop c3 not seeing scanner in Import

Following an OS X 10.8.2 upgrade on my iMac, my Canon Pixma 495 scanner won't work with CS3 Photoshop. It no longer shows up under File/Import. Hopefully a minor tweak in Permissions can fix this, but I've seen nothing about it so far. Preview and Canon's scanner software prefs pane works ok, but so far not Photoshop or Adobe Pro.
(Thanks in advance for suggestions)

Although Adobe did some testing of CS3 and Mountain Lion, they acknowledge that something might show up. If your scanner works fine with everything else, I'd suggest contacting Adobe to see if they can be of any help. You also might check in their user forums.

Upgraded to CS5 running Yosemite (mac os 10.10), upgraded scanner Epson Perfection Photo 700, click on "import" and CS5 is not showing scanner dlick on "import" in photoshop

upgraded to CS5 running Yosemite (mac os 10.10), upgraded scanner Epson Perfection Photo 700 software--when i click on "import" CS5 is not showing scanner--what do i have to do to get it to recognize scanner?

Hi Gene,
Persistence pays off: so initially, CS5 was not recognizing my Epson Perfection Photo V700. I reloaded the Epson software twice and using the mac menu for printers and scanners tried to get it to operate. no dice. Finally, on the third try, I went to Finder to look under applications software, found the epson software and clicked on that, and finally got the Epson scan window to open. So now, even tho i can't open it from inside CS5, i can still get the image into CS5 easily by clicking on "open" and going to finder. (Still good to know about Vuescan tho.)
Aloha,
Temple

CS3 Photoshop Does Not See Scanner

I am running 10.7.5 Intel Core i5. Before I zapped my PRAM, I used to be able to go to> Import and choose EPSON Perfection V33/V330… and now I get a message that says: CS3 Photoshop -- Could not complete the import command because there is no scanner installed. What the heck did I do to get it going the first time? Vue Scan Twain is giving me the color beach ball of death. Whining :- o I like to scan in photoshop and have the scanned file open directly.

Try Preview or Image Capture to see if scan is working.
File > Import from scanner....

Lightroom CC Import sees CF Card in reader but does not see any images, cannot import anything

I have installed Lightroom CC. It seems to work but if I connect a card reader with a CF card, while Lightroom sees the card, it sees no images. I have to copy the files to a hard disk and import from there. How do I fix this annoying problem?

Hi drchevalier,
You mean, you are able to import those files, if moved to hard drive but not able to view them when importing directly from the CF Card? Please attach a screenshot.
If so, might be an issue with the card. Did you try reformatting the card in the camera itself and check? If not, might want to try that.
Also, make sure your camera is in the Camera Raw plug-in | Supported cameras list. Else, you might not see it in Lr.
~ Arpit
EDIT: Sorry, did not see your reply. Glad to hear that the issue got resolved.

Lightroom 4 and MBA's SD reader not seeing RW2 raw files

I've just upgraded to Lr4 from Lr3. Lr3 worked great in every respect with importing JPG+RW2 image pairs when accessing via the MBA's card reader. However, Lr4 does not see the RW2 raw files(?)
As a test, I first copied all image files from the card to a test folder on the harddrive. Lr4 saw all files fine and was able to import them into the library, so it is seemingly a problem associated with the card or the reader, or Lr4 has a problem with the card or the reader. The card is a Sandisk 16Gb "Extreme Pro" that has worked perfectly with Lr3 ever since I purchased the camera (Panasonic G3)
Has anyone experienced similar problems? ... especially with Lr4, but also in any other respect?
2011 MBA, Lion 10.7.3
TIA & cheerios from the Avalon Peninsula

>Just curious -- is there some difference between the NEF files created on my Nikon D800 (which are easily imported into Lightroom) and the NEF files created on the Nikon D610 (which are not easily imported into Lightroom)
Lightroom 5 supports the D610. There is a big difference between nef from the D610 and older cameras. They were shot with a camera that Adobe hadn't profiled yet when LR 4.4 was out. Otherwise, if you hack the nef files to read that they were shot on a D600, LR 4.4 will read them, but I would caution against doing that as the sensor is slightly different on the D610 than on the D600, resulting in differences in color rendering. Simplest is as dj says to convert the nets to dng (which embeds the newer profiles in the file) or to upgrade to LR 5.

Why does PP CS5 not keep my preview files on my Mac?

I love Premiere Pro on my Mac because it interfaces so well with AE. However, every time I render something in my DSLR timeline, shutdown Premiere, then open it later, I have to re-render again.
I am not a novice and I know what I am doing, but I've tried everything and it won't keep my render files.
I want to switch away from Final Cut because I can edit DSLR natively in Premiere, but Final Cut seems to work better.
I am using dual 2.93 ghz quad core Xeon processors, 16gb ram. Internal 4tb raid, 3 external 4tb GRaid firewire drives for video storage. These 3 drives are always attached to my system and are always on when editing. The render files are always there and not on another portable drive somewhere.
I can render my timeline in PPro, then close the program. Open the program back up in a minute and have to re-render.
Any ideas?
Thanks.

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.

Not seeing all the files on a shared Windows server??

I'm using a Windows Server 2003 to share files between Macintosh an Windows users. But sometimes the Mac users (10.4) don't see all the files (in the same folder) that the Windows users do! I've checked on the server and I don't see any (obvious) permission problem ... So why aren't all the files displayed???
Any help is greatly appreciated!
Jerome

Hello Herr Jerome, I have the same problem, here in our company. We have around 70 employees connected to a windows server network. There are 68 PCs and 2 macs, one of which is mine. We have a special directory on the server called macdata, but other users place their files in their own respective directories, to which we normally have access.
Since yesterday, if anyone else places files from PC on to the server for me, I cant see them. I can see all other files but not the ones copied since yesterday.Our support guys have tried pretty much everything including resetting permissions, to no avial. finally they received an error message: Caution older mac systems will have problems reading more than 65000 (plus a few files). But there are in advance of 100 000 files on our server, but the extra 35 000 wernt put on there just yesterday.I´m running Macosx 10.4.11 which is by no means an old system.
I´ve spent the day hunting the Internet for a solution, but Info on this subject seem to be scarce! I mean this is a very big problem in a business environment, our IS dept has been trying to scrap the macs for years and I´ve been working here on a mac and fighting for 15 years. So now our IS has at last a valid reason for switching us to PCs.
I don´t understand Apple not publishing these limitions in a prominent spot on their website, not to mention a solution because it´s a crucial limitation, people should know about. Apple truely is not interested in corporate, nor in its truly loyal champions bravely fighting aganst the PC onslaught

Help Xerox c1190 All in one MFP. All working but can not see Scanner

Hi all,
I hope someone can help. I just bought a new Xerox C1190 MFP. I run a small wireless network via airport express b/g and an imac and macbook pro.
I connected the xeroc all in one to the airport by USB
After a long tough search i found the up dated drivers for 10.6.2 and all working fine except for the scanner.
Image ready and the network just cannot see the scanner. No matter what i do. Driving me nuts. No info anywwhere. The singapore xerox people say its an apple problem abd the apple people say its a xerox problem.
Image ready just can not see the scanner but in the print and fax preferences i can see the printer and printer works no problem. The scanner just does not appear connected.
Has anybody got any idea on how to solve this problem?
Also, i read in the manual that you can set up the Xerox by USB AND Ethernet. I thought i could run the printer on USB and set up the scanner to run on as a network IP item. Basically set up the Xerox to run as both USB and Network IP .
My problem is that when it comes to setting up IP address and stuff like that i need step by step instructions. Completely confused about IP addressing and how to set up a network item.
Could anyone please help.
Thanks
Joe

Review my post here:
http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/SOLUTION-Get-Win-7-Printer-Drivers-HP-Solutio...
And see if something similar will work for you.

PS CS5 not seeing scanner in File Import

Similar Messages

Maybe you are looking for