Ps CS6 13.0.6 and cursor offset when mirroring to projector

Since upgrading to Photoshop v13.0.6 in December I've found that when mirroring the desktop display to a projector in a classroom, the cursor is not alligned with what is actually happening on the screen of the desktop machine or projector screen. This is happening in two computer labs; in one the desktop screen is offset and in the other the desktop is offset. The offset increases proportionally as you go right on the screen, so on the left edge it's hardly noticable, but as you move right it can be over 50 pixels off. See the following pics
Shot of the screen from the projector...
Shot of the desktop display...
This does not happen in the Finder, and seems particular to Photoshop, though I've not tested it in other Adobe programs.
This makes it hard to teach Ps!

It might have something to do with the print menu which always says Range: page 1 to page 2, even though there is only one page worth printing. It's quite illogical to print a second page when only one is there. If I wanted two pages of the same thing that's what copies are for.
As near as I can tell, a range would only be used for an image that doesn't fit on one page. My image is less than 5cm high and less than that wide. (It's the same size as the lit apple logo on the lid of my Mac, which is what the image is of.)
I tried setting and saving the default from range to single, but even then it prints two pages of the same thing both to a physical printer and a PDF file, and when I next print the range is back to page 1 to page 2. This is all without even exiting PS. Do I have to restart PS for the default to take effect?
Why can't I save a default? Is this a directory permission thing, and why don't I get an error that they can't be saved if permissions are the reason?

Similar Messages

CS6 Interface is unresponsive and really slow when using lots of layers on OSX 10.8

I have a simple project, using lots of layers, but no effects. It takes more than a minute for the project to open, after which the interface becomes slow and unresponsive and doing anything in general is a pain.
I've tried changing settings relating to multi-processing. Currently I have 1.5 GB assigned to each core and it tells me it can use 7 cores as a result. I've assigned 13 out of the 16GB or RAM I have for after effects. Caching is also enabled.
The only thing I can think of is I can't enable the GPU for rendering as I have a NVIDIA GeForce GT 650M with 512M of VRAM. Is this the problem, or is there something else I can try/do differently?

MP is not going to help. Reset your preferences to the defaults. Make sure AE is up to date. There have been several bug fixes. Give that a try. If it's still slow please tell us what you are using as footage and give us some details about the size of your comp. Some footage is harder to interpret than other. One last question, what is lot's of layers? 15, 150, 1500?

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating?

Spacebar in CS6 doesn't work and hotkeys are shifty

I just recently downloaded CS6 from the creative cloud, the spacebar in CS6 doesn't work and switching cursor settings (brush, handtool, select all, move etc...) with the keyboard causes the program to pause for 1-2 seconds before the mouse will move again.
This is really obnoxious and ruins any workflow you want to have...
OH and I called Adobe support but that was a big FN' mistake.... most aggravating process and they are too damn skeptical about if you own the software or not!
Has anyone had issues w/ this?

You can try trashing your prefs (see Replace Your Preferences), but I don't think that's the problem, nor is there a general problem with book page numbering in CS6, so it's something that you've set incorrectly, or a step you've missed. Did you update the numbering after adding the files?

Why is my InDesign CS6 document offsetting when it prints?

I've had CS6 for several months and had no issues... until now. Suddenly an 8.5" x 11" basic document i use regularly is printing with a .25" offset at top and left, as if allowing for bleeds. But I've checked all settings in document and print options, and offset is turned off, as are bleed/slug selections. I have no "invisible" items in my document that could be triggering bleeds by default. I'm stumped. Can anyone suggest any settings I might have missed?
Note: I recently printed a larger document with bleeds on ledger sized (11" x 17") paper through the manual feed tray. Some of those settings showed up in my document print options, and I've weeded those out (I think). But I'm still getting the offset when I print.

Thanks for the reply. I'd already checked the printer setup.
I reset the printer presets (at the very top of the print dialog box) to "default" and that seemed to fix the problem. I still have no idea what was selected/unselected to cause the offset issue.

Error in updating DPS Desktop Tools CS6 32.0.0 and Photoshop Camera Raw 8.7.1 (CS6)

When I tried to update DPS Desktop Tools CS6 32.0.0 and Photoshop Camera Raw 8.7.1 (CS6) in Adobe Photoshop I get the following errors in the error log:
DPS Desktop Tools CS6 32.0.0 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I208
Photoshop Camera Raw 8.7.1(CS6)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
I purchased Adobe Creative Suite with my Mac so I have an installed version. I have tried rebooting, but to no avail. When I search for help on the site, none of the help explanations fit (e.g., delete a folder that doesn't exist on my computer). I have a 27 inch iMac running OS X Yosemite version 10.10.1. Thanks.

Sscrase what specific error messages did you receive within the installation log files for the update? You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.

Autocommit and Cursor commit Behaviour

Hi,
I need help to set and get the Autocommit and Cursor commit behavior attributes
in Oracle.
AUTOCOMMIT:
For DDL Statement, this attribute is set while executing the OCIStmtExecute() api
as below:-
r = OCIStmtExecute(d->svc, d->sql, d->err, 1,0,
(CONST OCISnapshot *) NULL,
(OCISnapshot *) NULL,
d->transaction ? OCI_DEFAULT :                                         OCI_COMMIT_ON_SUCCESS);
For DML Statement, from the OCI documentation the database parameter attributes
support OCI_ATTR_AUTOCOMMIT_DDL with the values OCI_AC_DDL and OCI_NO_AC_DDL.
Since this is a parameter attribute, I couldn't set using OCIAttrSet() API.
I need help in implementing AUTOCOMMIT for both DDL / DML statements.
CURSOR COMMIT BEHAVIOUR:
Similarly, I have observed that Oracle support cursor commit behavior attributes
using OCI_ATTR_CURSOR_COMMIT_BEHAVIOR and the attribute values are OCI_CURSOR_OPEN and OCI_CURSOR_CLOSED.
I have tried setting this attribute as below:-
ub1 nCommitType = OCI_CURSOR_OPEN;
oraRC = OCIAttrSet((dvoid *)d->svc, (ub4)OCI_HTYPE_SVCCTX,
     (dvoid *)&nCommitType,
     (ub4)sizeof(nCommitType),
     OCI_ATTR_CURSOR_COMMIT_BEHAVIOR, d->err);
This always fails with the error ORA-24315: illegal attribute type.
I need help in setting this attribute using OCI.
Another approach to set Autocommit / Close Cursor attributes:-
Oracle support SET commands for autocommit and closecursor, I have prepared
and executed these set commands using OCIStmtPrepare and OCIStmtExecute api. The OCIStmtExecute() API fails to execute the below command texts.
SET AUTOCOMMIT ON/OFF
SET CLOSECURSOR ON/OFF
Is it the right method of setting these attributes?
Thanks,
Sankar.P.

Hi.
You are trying to commit "child" information before your Parent information is commited.
Can you describe how you dragged & droped your views?.
Dragged relationship views or single views?.
Can you put output log with jbo with FINEST level?.
To find a solution try next solutions:
1) Disable "strong" association between your parent-child entities. To achieve it follow next steps:
- Go to your "Assoc" that describes your foreign key.
- In "Realtionship" tab, "Behaviour" disable "Composition Association".
Image: http://1.bp.blogspot.com/-Em8NZvjOUzo/T_NQbJTcLjI/AAAAAAAAAm4/hPsDwtEhJQ4/s1600/4.png
2) Drag and Drop correct views as a Master-Detail (cascading views in your Data Control).
http://2.bp.blogspot.com/-1By5vNNGMFQ/T_NQdYzexKI/AAAAAAAAAnE/DGn7Gr0RSDw/s1600/6.png (in spanish).
In the image, drag & drop PortalwebView2 is the correct way for Master-Details tables. Probably you dragged PortalwebView1 that have dependecy to master table.
Steps that you have followed:
- Drag & Drop dependen View Object as a Master-Detail with two tables.
- Add Create operations from these views to create Rows.
- Add Commit general operation from Data Control.
Try to drag & drop Master-Detail views correctly before disable association.
PD: To try your model faster run Model project instead of your application.
Regards.
Edited by: Daniel Merchán on 30-jul-2012 12:05

I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function works

I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function, render workspace function, export file are still operational. How can I fix it so I may complete my assignment?
Besides DaVinci Resolve, Adobe Creative Suite 6 is the only software on the machine. I am using Windows 7 Professional 64-bit Operating System on AMD FX 6100 six-Core Processor at 3.31gHz and 32 GB RAM memory. There are two SLI-bridged GTX680 NVidia cards.
The software was very stable for the last six months, working with 720P proxy files from 2.5K masters (Blackmagic Design Camera). I am working on a feature-length project that exceeds 1000 edits. I have broken the file into 2 one hour segments.
I have deactivated the software before reinstalling the entire OS from scratch. PP6 was very stable for 48 hours. Then the freezing space bar returns. After a dozen strokes into the project, same problem. I have made cache files store next to originals, I have deleted preview files if they were corrupted and causing instability. Am I missing something?
I have Microsoft Security Essentials for virus protection. I double checked the memory for damage/defect. Nothing says that the motherboard or other components are damaged.
I am in film competition overseas and need to have deliverables in less than a month's time. I lost the last two weeks troubleshooting and this crisis came at an inopportune moment of the project.
Any assistance would be greatly appreciated.

Still getting software freezes but found a way to mitigate for the mean time.
Upon launching Adobe Premiere Pro, hit CTRL-ALT-DEL to launch TaskManager as well.
You will want to highlight Adobe QT32 Server.exe
Right click and select "End Process Tree"
You will get considerable stability in the program, long enough to get timing of cuts done. Be sure to save often.
If the program freezes, do not hit Save. You definitely want to avoid saving the corruption into your TimeLine
CTRL-ALT-DEL to relaunch the TaskManager and highlight Adobe Premiere Pro.exe
Right-click to "End Process"
No need to reboot the whole system; just launch Premiere Pro again and continue with the session. Note that your work reverted to Last Save.
Hope this helps until the bug is fixed.

I'm working in Photoshop CS6 on a Mac and am having trouble when I select a Path it automatically feathers the selection border. I can't seem to find any place to adjust a feather setting. Does anyone have a suggestion? I'm using paths to silhouette an im

How do I change a default from feathered edge to sharp edge when I select a path?
I'm working in Photoshop CS6 on a Mac and am having trouble when I select a Path it automatically feathers the selection border. I can't seem to find any place to adjust a feather setting. Does anyone have a suggestion? I'm using paths to silhouette an image on a photograph to use in another document and I need a hard edge on it, not a feathered one.

In the Paths panel, click the flyout menu (in the top right of the panel) and choose Make Selection (this option will only be available if you have a path selected). Reduce the Feather Radius to 0 (zero) and click OK. This setting will be the default even when clicking the Load Path as Selection button.

I have a license for CS6 on my MacBook Pro. I want to purchase an iMAC and be able to do my heavy duty Photoshop processing on this new iMAC when I am at home I need to keep CS6 on my MacBook Pro and use it when I travel. How can I have copies of CS6 o

I have a license for CS6 on my MacBook Pro. I want to purchase an iMAC and be able to do my heavy duty Photoshop processing on this new iMAC when I am at home I need to keep CS6 on my MacBook Pro and use it when I travel. How can I have copies of CS6 on both machines. I am the only user of this software.

You can install and activate CS6 on both machines perfectly legally.

Mac 10.9.5 trying to launch Illustrator CS6 for first time and prompts Java even though I have Java 8 installed.

Mac 10.9.5 trying to launch Illustrator CS6 for first time and won't launch, prompts for Java 6 even though I have Java 8 installed!
Apple says Java 6 is very insecure and not to use it. I have the latest Java installed. Why won't Illustrator launch? What else can I do?

tm,
I believe you should be able to get round the issue by following this:
http://oliverdowling.com.au/2014/03/28/java-se-8-on-mac-os-x/
It is even more thoroughly described in this thread, see post #3 on by gator soup:
https://forums.adobe.com/thread/1706469

Reinstalling Photoshop CS6 on a Mac and Bridge does not install

I've been having trouble with Bridge CS6 not creating previews and thumbnails correctly, so i tried to reinstall the software and during the process it creates the Bridge folder and then when the install is complete the folder goes away. Befroe doing this, when I went to purge the cache in Bridge I was getting a message that said the file was corrupted and to clear the master cache in cache preferences. I couldn't find that, so decided to reinstall. Now I have nothing. Please help?

Think i figured it out. Repaired the permissions and threw away the old adobe Bridge CS6 Extensions folder. Everything works now.

Sudden system slow down and cursor respond slowly ,

when i check error report it shows:
Description
Faulting Application Path:   C:\Windows\explorer.exe
Problem signature
Problem Event Name:   BEX64
Application Name:   Explorer.EXE
Application Version:   6.3.9600.17039
Application Timestamp:   53156588
Fault Module Name:   QtCore_Ad_SyncNs_4.dll_unloaded
Fault Module Version:   4.8.2.0
Fault Module Timestamp:   50d3fca7
Exception Offset:   00000000000265fe
Exception Code:   c0000005
Exception Data:   0000000000000008
OS Version:   6.3.9600.2.0.0.768.100
Locale ID:   1033
Additional Information 1:   1e37
Additional Information 2:   1e373e69fff075aed81f57003e66ce10
Additional Information 3:   8b26
Additional Information 4:   8b26c5947343d1f11e81b0fbc04b5d6b
Extra information about the problem
Bucket ID:   b91858135f9eda1e235bf86ff78eae4d (81644584682)
this occurs randomly ............

yes I m Using Auto desk Inventor 2014 pro, and problem starts When I instal this software after Every RESET, should I re-install the whole Software or Auto-Desk 360 only, but latest version Of inventor is
2015 and It might not be compaitable to my System.

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

Hi,
first, sorry if my english sucks jajaa i speach spanish, havent practice my english for a while.
first i edited my video in premier cc
sequence 1280X720, 59,94 fps
48000hz - stereo
the i linked it with dynamik link to after, make some color correction, etc etc etc
i renderd in quicktime animation
my video looks fine in my computer, but when i send my .mov video to encore (cs6) in a HD MENU and standard menú, the image sucks.
i have done the transcoding in encore, but i doesnt work either. i dont know what else to do.

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed. Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed.
Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

You need to run a platform swap:
Order product | Platform, language swap
Until it's through, you can use the trial version.
Download CS6 products
Mylenium

Ps CS6 13.0.6 and cursor offset when mirroring to projector

Similar Messages

Maybe you are looking for