PS cs6 - can't save a custom keyboard shortcut

Hi there!
I have changed the crop shortcut to ctrl + >, and it works fine until i restart!
when i check the shortcut i previously changed, it is now ctrl+&???
Why?????
I used to have this same shortcuts since cs4.
(PS 64bits, latin keyboard)
Thanks a lot!!
Cheers!!!

I wonder if it might work with a script like below
// =======================================================
var idCrop = charIDToTypeID( "Crop" );
var desc123 = new ActionDescriptor();
executeAction( idCrop, desc123, DialogModes.NO );
Copy the script above into extend script cs6 and save the script with a name like Crop.jsx to your photoshop cs6 presets>scripts folder.
(any name as long as the .jsx extension is used)
(you might have to run extend script cs6 as an administrator to save the script into the photoshop cs6 presets>scripts folder)
Then start/restart cs6 and the script should show under File>Scripts and see if assigning your shortcut to the script works.

Similar Messages

Can't save any custom workspaces AE CS6? (recently upgraded to OSX 10.9 rMBP)

Hello -
since transferring my CS6 across to my new laptop running 10.9 -
I can't save any custom workspaces... it's driving me crazy having to move everything around every time i restart AE.
- I arrange the workspace and save it as a custom name - this appears in the menu.
*However* - upon restart of AE - this custom name is no longer there, and the workspace is once again, an old workspace I had, with windows everywhere.
- I can reset STANDARD workspace - but even then - when I change to another workspace, then change back to STANDARD again, it reverts to the older, messsy version of standard workspace i had...
so there's some issue with saving for me....
- I checked 'get info' to see that my workspace related preferences in the library folder had read/write access and even changed that to everyone has access...
After doing this, I got this error below, when resetting STANDARD workspace, saving project, then switching to another workspace - and then switchng back to STANDARD...
it still brought up the messy workspace version, not my newer reset version, and gave this message:
"After Effectswarning: Error parsing properties list from file ".......Preferences/Adobe/After Effects/11.0/ModifiedWorkspaces/UserWorkspace11.xml"
(I"ve also repaired permissions with Disk Utility ( there were a lot needing repair, but none were explicitly adobe, and didn't solve problem on laptop reboot )
I've been trying to find a solution online, without success so far...
Any advice greatly appreciated...
(And I wonder what this problem might have wider ramifications for my version of AE? )
thanks!

I'm having this same problem and yet, I did not migrate my software from one computer to another.
I downloaded AE CC 2014 off of Adobe's installer.
I can't get my workspace to be remembered at all. I can make different workspaces, naming each one. But when AE restarts they are all gone.
Any one else with this problem?
Thanks in advance.

Is Photoshop CS6 can't save a file more than 2gegabites?

Is Photoshop CS6 can't save a file more than 2gegabites?

It depends on the file format, many formats are limited to 2 or 4 Gigabytes.
PSB (Large Document Format) is not so limited.

Can I save the custom graph format?

Hi All,
Can we save the custom graph format?
-- BIEE11.1.1.5.0
When using combined line-bar chart. I set the width of line chart to 3px.
This is thinner than the default setting.
I found the following section to setup/change for custom graph style formatting;
can we save the custom graph style formatting as a default?
Edit Graph View >
Graph properties > (T)Style > Graph Data
style and conditional Formatting
Style Formatting
Custom Formatted Positions:
Press +(Add button)
Thank you in advance,
Hiro

It worked with the following changes on the file dvt-graph-skin.xml:
<Graph>
     <SliceLabel>
     
     <ViewFormat decimalDigit="2" decimalDigitUsed="false"/>
     </SliceLabel>
     <Title>
          
          <GraphFont fontColor="#0" bold="true"/>
     </Title>
     <SeriesItems>
     <Series id="0" color="#ff0000" borderColor="#ff0000" lineWidth="3"/>
     <Series id="1" color="#00ff00" borderColor="#00ff00" lineWidth="1"/>
     </SeriesItems>
</Graph>

I can no longer use the keyboard shortcuts, 'command C' and 'command V'. Did I inadvertently do something to my keyboard or computer that caused this? Is there a way to fix it?

I can no longer use the keyboard shortcuts, 'command C' and 'command V'. Did I inadvertently do something to my keyboard or computer that caused this? Is there a way to fix it?

You can also check in System Preferences > Keyboard > Keyboard Shortcuts, make sure that custom shortcuts were not created using those same commands. If ones were, they could be creating a conflict. Step throuogh each of the items in the left list, checking the array presented in the right pane for each.

Custom keyboard shortcuts and editing multiple layers in Flash CS4

Hi, all -
CS3 -> CS4 transition newb here who's getting increasingly frustrated with the new motion tweens; however, for this project, I'm working in a 3D space and require using them, so I'm dealing with this bit by painful bit. I found the tip about Split Motion, but first question: how do you apply Split Motion across several layers at the same time? I have six different tweens, and in CS3, I used to be able to shift-click or click-drag across frames and apply a command to all of them (for example, hit F5 to add frames), but Split Motion is requiring me to right-click on each and every layer. This is really laborious, and I worry about future animations that might be more complex.
Similarly, I tend to add custom keyboard shortcuts to each of my Flash versions for commands I use frequently and don't want to right-click a menu for (such as "add motion tween") - however, I can't seem to find where to create a custom shortcut for either that, or Split Motion.
Any and all help would be appreciated as I muddle through this. Honestly, guys, I WANT to like the new version and there's so many added features, but it's hampering my workflow so bad I want to pummel it with sticks.

Hey there,
I definitely hear you about Split Motion. There is an enhancement request for supporting multiple layers, and adding it as a keyboard shortcut. The first one is tricky, but the second one is not. I think there was hope that splitting motions wouldn't be necessary much (especially since you have to be careful when doing so when eases are involved), which is why the eventual need for more functionality related to split motion was realized a bit late in the schedule.
Now regarding other operations, such as you mentioned F5 to insert frames - that and other operations (inserting certain types of property keyframes, F6, and so on) work just fine.
You can apply a shortcut to Create Motion Tween in the custom keyboard shortcut dialog. Not all operations in the program are available though (most context menu items aren't), which is why unfortunately why we don't see Split Motion yet.
It might be possible to avoid Split Motion though with another workflow. What are you using the feature for? Just curious in case I can help.
Jen.

Custom keyboard shortcut to merge cells in Numbers?

How do I create custom keyboard shortcut to merge cells in Numbers? The instructions on the support site say to open Keyboard in preferences then click the +. I don't see a plus anywhere. On any menu.

The Merge Cell command does not have a keyboard short cut. You can, however, add one to your user space as follows:
Open System Preferences, then select the keyboard panel:
On the left click the "Application Shortcut" then on the right select Numbers. now click the "+"
Now enter the exact name of the menu item "Merge Cells" (by looking up the name of the menu item in the menus of Numbers), then selec the "Keyboard Shortcut" field and type the exact key combination you want to use. Be sure it is unique from other Numbers key combination.

Custom keyboard shortcuts for Liquify and Vanishing Point filter interfaces in Photoshop CS4?

Is there a way to set custom keyboard shortcuts for Liquify and Vanishing Point filter interfaces in Photoshop CS4? When I change my keyboard shortcuts preferences for Photoshop, they don't change for these filter interfaces. Is there another way?

what is the problem ??
I tried to change the shortcut for the Vanishing Point and Liquify from
Edit -> keyboard shortcuts(button) -> keyboard shortcuts (tab) -> filter (tab)
and you will find these filters :
double click on it and make a new shortcut
but it MUST be Ctrl + (any letter) or you can make it Ctrl + Alt + (any letter)
but if you made it just one lettre like S for example
you will can't make a shortcut.
hope I understood what you ment ???

Create custom keyboard shortcuts

1. How do I create a custom keyboard shortcut so that I can toggle between two fonts, say, or two keyboards (English and Greek) quickly within a single document....
I am trying to make the switch fm msw to pages, but I cannot for the life of me locate these options.

Feature unavailable for the fonts.
If you have only the two keyboard layouts available, there is a shortcut defined at system level to switch between them :
command + space
Yvan KOENIG (VALLAURIS, France) jeudi 19 mai 2011 22:00:06
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Custom keyboard shortcuts

Hi, I just installed arch and I'd really like to get this one thing working:
how can i define custom keyboard shortcuts, say I want a script to run when I press <ctrl><alt>T ?
I defined a few shortcuts in GNOME but they are all predefined and I couldn't see how to point to custom apps like scripts.
Please share your thoughts : )

AllTom wrote:
sweiss wrote:
While we're at it, is there also a tool which lets you bind mouse keys to act as a combination of keyboard/mouse keys?
E.g. I want to bind one of my mouse keys to act like Alt+Left mouse button (so I can use it to drag windows).
Is it possible?
I have only ever used imwheel for tasks like that.
That almost works. Thing is I can't somehow "tell" imwheel to keep the simulated buttons pressed until I release the real one.
What a shame.

Custom Keyboard Shortcuts Not Working In Layer Style / Blending Options Dialogue Box (Mac OS 10.6.8)

In the Layer Style / Blending Options dialogue box, my custom Keyboard Shortcuts to zoom in and out of the image is no longer working. Cmd+opt+shift+1 acts as cmd+1 (jumps to Drop Shadow), and cmd+opt+shift+0 acts as cmd+0 (jumps to Stroke). Outside of this box the commands seem to be working fine.
Example 1: Create a new RGB document, cmd+j the background layer, double-click this layer to open the Layer Style / Blending Options dialogue box, mash Cmd+opt+shift+1.
Result 1: The dialogue box shift focus to the Drop Shadow Options instead of the image zooming in to 100%.
Expected Result 1: The image should zoom to 100%.
Example 2: Create a new RGB document, cmd+j the background layer, double-click this layer to open the Layer Style / Blending Options dialogue box, mash Cmd+opt+shift+0.
Result 2: The dialogue box shift focus to the Stroke Options instead of the image zooming to “Fit on Screen”.
Expected Result 2: The image should zoom to “Fit on Screen”.
This same thing happened in the CS5 Beta, and it was quickly fixed, so I hope this is not a complicated issue.
Thanks, and keep up the wonderful work!
Jacob
Mac OS X 10.6.8 on a 3.33, 6-Core MacPro5,1 with 16GB RAM w/ separate Scratch Disks & ATI Radeon HD 5870

Hi,
If you are experiencing issues with Software Update you could try the Combo Update:
http://support.apple.com/kb/DL1399
Cheers,

How can I get the Voiceover Keyboard shortcuts to show up in a form in which I can copy

I have low vision & have been trying to learn to use Voiceover on both my iPhone & my Mac mini for months. Very frustrating.
1. How can I get the Voiceover keyboard shortcut commans to show up in a form in which I can copy & paste them into a pages document so I can print it out & use for quick reference?? The one that shows up when I press VO +HH won't let me copy & paste it, & it won't show up in the Help section no matter what subject I enter. The help topics shown do not correlate with the topics I'm entering. why is that??
2. Please make the cursor able to be wider, like in the software program Zoomtext, that I used when I had a PC. The razor-thin cursor (in this text box!) in Pages is impossible for me to see.
Thank you for any help you can provide.

http://www.applevis.com/guides/voiceover-keyboard-shortcuts-mac-os-x
You should be able to copy them from there.

How do I change the default '/' shortcut (select none in colour swatch) to something different? Where can i find it in Keyboard Shortcuts?

How do I change the default '/' shortcut (select 'none' in colour swatch) to something different? Where can i find it in Keyboard Shortcuts?
Any ideas?

Thanks so much )))))))

Safari 5.1 customized keyboard shortcut not working

I've just updated safari on snow leopard and my customized keyboard shortcut: go to next/previous panel (ctrl -> and ctrl <-) don't work anymore even if i set them in my system preferences

I'm also experiencing issues with custom keyboard shortcuts not working after the update to Safari 5.1. I had no problems with the previous version of Safari.... I wish I had not updated.

Mac Mail custom keyboard shortcuts won't work

I'm using Mac Mail, trying to set keyboard shortcuts to set flags
- I goto preferences/keyboard/application shortcuts
- click on "+" to add shortcut
- specify Mail shortcut in dropdown menu
- add 6 different shotrcuts OPT/CMD-_ (where _ is: L S V F R P)
- when I added the shortcut, i was very careful to make sure the MENU TITLE of the shortcut in OS-X preferences paine is the same as the
Then, in Mail app, reading a message, I press the shortcut (ex: OPT/CMD-L), and the flag is not set

I'm having this exact same problem with Mail.app on Mavericks, and my workaround is exactly the same. Doesn't it sort of defeat the whole purpose of keyboard shortcuts if I have to grab my mouse to expose the relevant menu?! Very frustrating. Does anyone know how to either 1) find a better workaround on our end or 2) convince Apple to fix the problem?
#2 seems unlikely since custom keyboard shortcuts is probably a pretty rarely used feature...

PS cs6 - can't save a custom keyboard shortcut

Similar Messages

Maybe you are looking for